QUARK KERNEL For Moto G4 Plus (Lineage Extended)
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
Click to expand...
Click to collapse
INTRODUCTION:
Hello everyone, this is my personal kernel for the Moto G4 Plus. This version is based on Lineage OS kernel source with some additional patches.
FEATURES:
Compiled using linaro 6.3.1
Init.d support
Disabled Gentle fair sleepers
USB Turbo Charge Support
Added FIOPS I/O Schedule
Added SIO I/O Scheduler
Added BFQ scheduler
Governors enabled:
Lionfish
Dancedance
Lionheart
Smartass2
Bioshock
Nightmare
Alucard
Conservativex
CPU Hotplug Enabled
Added bunches of TCP Congestion Algorithm
CPU Boost
zRAM Support
Fingerprint Sensor As Home
LED Notification While Charging (Thankz to @vache)
ZRAM Compression
Adreno idler
Dynamic fsync
DownloadsGet it here
Instructions
Flash through TWRP
Credits/Thanks:
- Mororola for sources
- linus for his amazing kernel source
- @vache and @Shreps for base kernel source
Compatibility
- Will work on any roms using LineageOS kernel source as base. (LineageOS,Beanstalk,AOSPExtended,OctOS)
- You can try on other roms and report me back . (if enforcing didn't work try permissive. Be patient while the kernel boots.)
- If you find sensors doesn't work .use this
- If your root breaks.. flash su
XDA:DevDB Information
Quark Kernel, Kernel for the Moto G4 Plus
Contributors
rahulsnair
Source Code: https://github.com/rahulsnair/android_kernel_motorola_msm8952
Kernel Special Features:
Version Information
Status: Beta
Created 2016-10-08
Last Updated 2017-03-18
Changelog
1.0
-Initial Release
1.1
-Added Zen I/O Scheduler
2.0
-Switched to Sabermod toolchain
-Now supports Android N based roms
05012017
-Switched back to UBERTC-6.0
-Synced to CM kernel source
25012017
-Using linaro from now on
-ZRAM compression
-Adreno idler
-LZ4 ZRAM compression
-Dynamic fsync
@rahulsnair Nice work Buddy
You are on fire my friend
do u know if this will work on your teamoct os?
Dont know how, dont know why but i installed and i dont know why but everything works good
It works great in CM 13.0 XT1641
A can confirm that it works on octos xt1622 smooth as and great kernel thanks dev for the rom and kernel keep up the good work??
Working great so far on RR xt1625. You're killing it.
Is this kernel for custom ROMs only, or will it work with stock too?
Working on my xt1625. Only thing I noticed is that the text is sort of blurry
when using the browser when you touch the screen, then it's clear. Also seems to be a yellowish tint, not quite sure how to explain it. Anyone else seeing this?
skalnas said:
Working on my xt1625. Only thing I noticed is that the text is sort of blurry
when using the browser when you touch the screen, then it's clear. Also seems to be a yellowish tint, not quite sure how to explain it. Anyone else seeing this?
Click to expand...
Click to collapse
Wich ROM are you using? I also have xt1625 want to test
:good:
Teamoct os
rahulsnair said:
Changelog
1.1
-Initial Release
1.1
-Added Zen I/O Scheduler
Click to expand...
Click to collapse
Hey Bro, I Found Something, The Last 4 Cores (Big) Are Not Online 99% Of The Time.
Krsambhav16 said:
Hey Bro, I Found Something, The Last 4 Cores (Big) Are Not Online 99% Of The Time.
Click to expand...
Click to collapse
It's actually the first 4 cores (big cores) that are offline. It's good that they're offline most of the time, you will see them go online during heavy load such as installing an app or 10-bit H.264 video playback.
doomed151 said:
It's actually the first 4 cores (big cores) that are offline. It's good that they're offline most of the time, you will see them go online during heavy load such as installing an app or 10-bit H.264 video playback.
Click to expand...
Click to collapse
Okay Bro Thanx, I Thought That My Cores Have Been Damaged.
Bootloop in (xt1626) rom Temasek's CM13 - v11
Did the download link disappear or am I just dumb and can't see it
khaoticking said:
Did the download link disappear or am I just dumb and can't see it
Click to expand...
Click to collapse
Is there, see again
Hello, just report. This Kernel work very well on my XT1642 with the last RR ROM. Good luck.
Related
God's KernelGod's Kernel-True God Of Kernels
ABOUT God's Kernel:
AudioGod said:
God's Kernel is a open source kernel designed to unleash the power of Mi3/Mi4. The Aim of This project is to give a most stable ,power-full,ultra-fast kernel with Max Battery Life which is required for every Mi3/Mi4 user.
Click to expand...
Click to collapse
DISCLAIMER:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CHANGE LOG:
God's Kernel-R1
Built with UBERTC 6.0 and other tweaks.
Alucard Hotplug
USB Fast Charging
Franco's Custom thermal
Faux Sound
KCAL with the latest update
Fsync Disable
Selinux Permanently Permissive
General Optimization & Tweaks
God's Kernel-R2
Alucard_hotplug patches n dependencies added
MSM_Limiter
User Voltage Control
Intellidemand Intelliactive intelliminmax
kexec aka MultiRom support [Need's testing(WIP)]
Cpufreq glitches fixed which some user's faced
added support disabling keys
the kernel now supports CM and AOSP based rom and MIUI too
Much more stable snappy n battery efficient now
God's Kernel-R3
fully rebased on CAF LNX.LA.3.5.2.2.1-04310-8x74.0 (Xiaomi KK kernels)
added a optional build of 2.649 Ghz oc
gpu oc of 657Mhz
alucard updated n tuned
added support for Mi4
kexec removed due to lag of testing
intellidemand intelliactive intellimm and alucard governor major updates
God's Kernel-R4
2.8Ghz Overclock
yankactive governor
impulse governor
ElementalX governor
GPU overclock reworked as a few complaint about sudden lags sometimes
-O3 optimizations and Cortex-A15 optimizations
UBERTC 6.0 Latest toolchain used
MM support added
new simple thermals by sultanxda
global -10mv 100% stable
God's Kernel-R5
Major rebase and clean up
kexec working confirmed
gpu oc fixed
scrolling lags fixed
fixed the clean flash bootloops
memutil optimizations
workqueues updates n patches from upstream
usb fast charging improved
selinux patches updated
MM compatible
retuned simple thermals
ksm tweaked and added (no camera crashes recorded yet)
VFS RCU FREEZER SECCOMP LMK MDS n other updates
huge cleanup n patching
zzmove smartmax alucard
interactive governor updated
i/o scheds tuned
switched from alucard to bricked hotplug
selinux will be permissive on boot but can we changed
KSM added
removed the **** old mulitcore powersavings which never worked right xD
fixed Mi4w issues but they wont get multirom(rom support)
this kernel will not work on latest CM-13 and Ivan's MM AOSP and is working on all other ROMs :good:
OC removed i dont want complications i will test more n get a sweet spot i m quite busy these days to work on things so removed it for everyone's good
DOWNLOAD LINKS:
GK_CANCRO_MM_LP_MIUI_KK_R5_29112015_0232.zip
GK_MI4W_ONLY_MM_LP_MIUI_KK_R5_29112015_0234.zip
MIRROR LINK
INSTALLATION STEPS:
Minimum Requirements To Install God's Kernel:
Recommended Custom Recovery TWRP and a Rooted Device
Installation Procedure:
Boot Into Recovery Mode
Dirty flash the current rom you are on
Dirty flash gapps(if needed)
Flash provide Kernel Zip
Reboot To System
Follow Us on :
Google+
https://plus.google.com/communities/105868185017241678214
XDA:DevDB Information
[KERNEL][LP/MIUI/MM][Mi3/Mi4]God's Kernel R5, Kernel for the Xiaomi Mi 3
Contributors
Tarun93
Source Code: https://github.com/tarunkapadia93/gk_cancro
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R5
Stable Release Date: 2015-11-29
Created 2015-10-05
Last Updated 2015-11-28
Reserved
Older builds:
R1
R2
R3
R4
One more kernel.. Reserved
Works on official cm?
Which ROMs does this works on?
You did have mentioned KitKat, so the Wi-Fi works or not coz other kernels work too but Wi-Fi doesn't
I can't wait to test this baby and see how it develops. Thank you for your hard work.
wowwww
R1 Released
Links updated sorry guys was busy with a few things.
Works on dirty unicorns last test build, thanks @Tarun93 i'll test it
Rom Dirty Unicorn TEST-v9.7
- In kernel adiutor the max cpu frequency is stuck at 1497mhz, if I try to enhance it will return back to 1497mhz. (Rebooted and seems to stay at 2265mhz)
- I can see only interactive, conservative, powersafe and performance governor. No seen of your governors :c
Works very smooth also at 1497mhz, nice job!
Hope you implement D2tw in future, in these days i'll test the battery and tell you all the details
does it work on official miui?
[/COLOR]
josedb said:
does it work on official miui?
Click to expand...
Click to collapse
Yes, it's for MIUI too!
BIOLorenz said:
Works on dirty unicorns last test build, thanks @Tarun93 i'll test it
Rom Dirty Unicorn TEST-v9.7
- In kernel adiutor the max cpu frequency is stuck at 1497mhz, if I try to enhance it will return back to 1497mhz. (Rebooted and seems to stay at 2265mhz)
- I can see only interactive, conservative, powersafe and performance governor. No seen of your governors :c
Works very smooth also at 1497mhz, nice job!
Hope you implement D2tw in future, in these days i'll test the battery and tell you all the details
Click to expand...
Click to collapse
that's normal bro you phone might be warm at that time n its the thermal are throttling it down to get the temps lower you might have lowered the thermal limit
the thermal limit can be set manually with the help of kernel auditor
once the temp hits the temp limit = 1728000,
5c over set thermal limit= 1497600,
9c over set thermal limit = 1036800,
12 c over set thermal limit = 729600,
once the temperature is under the set temp limit it will be back to the normal freq
make's sense
n yes i have not added any governors as this was my first release i wanted it to be as basic as possible
i feel DT2W is still in BETA stage n i cant risk my users getting random reboots n things. will add it soon tho @vasishath (original porter of DT2W) is working hard on it so should be added soon
josedb said:
does it work on official miui?
Click to expand...
Click to collapse
yes sir
Which app to use for full control .And more accurately faux sound
Sent from my MI 3W using Tapatalk
chitalov said:
Which app to use for full control .And more accurately faux sound
Sent from my MI 3W using Tapatalk
Click to expand...
Click to collapse
Kernel adiutor covers most of the things
BUT if you are old school sysfs types n then use Aero Kernel Control n add you custom sysfs paths in the misc settings tab :fingers-crossed:
for faux sound its kernel adiutor will do well
I might have missed it, but i can't find the commit for hardware key disabling fix for cyanogenmod. Can you apply it? It's kind of important for me since my phone's capacitive key backlight is kind of screwed up(annoyingl6 uneven birghtness) and i had to use on screen button.
https://github.com/CyanogenMod/andr...mmit/a7347293af56824cf08008e049f3215b512177e5
Bro take your time and implement dt2w.Waiting for it. Best of luck.
Sent from my MI 3W using Tapatalk
This kernel has SOD in Blisspop
UPDATE: Fixed cleaning dalvik + cache
Nice options in kernel, but, in last miui the phone wont sleep. Battery charge is absoluty wrong.
gingerboy92 said:
I might have missed it, but i can't find the commit for hardware key disabling fix for cyanogenmod. Can you apply it? It's kind of important for me since my phone's capacitive key backlight is kind of screwed up(annoyingl6 uneven birghtness) and i had to use on screen button.
https://github.com/CyanogenMod/andr...mmit/a7347293af56824cf08008e049f3215b512177e5
Click to expand...
Click to collapse
noted will add in the soon coming R2 i have added a few more fixes already
josedb said:
Nice options in kernel, but, in last miui the phone wont sleep. Battery charge is absoluty wrong.
Click to expand...
Click to collapse
recalibrate your batter n clear the caches again use apps like Wakelock detector or better battery stats to find out wat draining your battery feel free to share the stats
Tarun93 said:
noted will add in the soon coming R2 i have added a few more fixes already
recalibrate your batter n clear the caches again use apps like Wakelock detector or better battery stats to find out wat draining your battery feel free to share the stats
Click to expand...
Click to collapse
thats the problem, i was using wakelock detector, there were no wakelocks, but it shows no sleeping in total statistics.
DISCONTINUED
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hello guys, here I'm introducing a custom kernel for our Moto X Play, based on Squid Kernel . Full credits goes to him:fingers-crossed:. I only added some tweaks and more is coming soon. No more blah blah...
Features:
Reduced VFS cache pressure
Disabled noatime and nodiratime
Dirty ratio tweaks
Enabled Arch power and Disabled GFS
Asynchronous I/O latency to a solid-state disk greatly increased
Optimized SLUB
VM_MAX_READAHEAD set to 1024 kbytes
Optimize apply_slack for size and speed - thanks to varunchitre15
Forward port Dynamic Fsync to Linux 3.10 by varunchitre15
Disabled MMC CRC check
Enabled some extra TCP Congestion Controls
Use all cores on-boot for faster bootup
HMP-aware task placement
Code:
[B]CPU Hotplugs:[/B]
[SIZE=2][STRIKE]Bricked Hotplug[/STRIKE]
MSM Hotplug
[STRIKE]MAKO Hotplug
ZEN_DECISION Hotplug
AUTOSMP Hotplug
MSM SLEEPER[/STRIKE][/SIZE]
Code:
[B]CPU Governors:[/B]
[SIZE=2]LIONFISH
SMARTMAX
BLUACTIVE
SMARTASS2
INTELLIACTIVE
INTERACTIVE_PRO
ZZMOOVE
ALUCARD
BARRY_ALLEN
BIOSHOCK[/SIZE]
How to install:
Download Phoenix kernel flashable zip
Copy it into SD Card
Reboot into custom recovery
Install zip from SD Card
Credits:
squid2 (for the GPL source)
varun.chitre15 (for the GPL source)
Kunal.Kene.1797 (for the GPL source)
HridayHS (for the GPL source)
Shoaib05 (for the GPL source)
Motorola
XDA
Google
Missed you ? sorry pm me I'll add you
Downloads:
See the attachment or Download
*** v1.5 and above are not compatible with Stock 5.1 roms ***
Click to expand...
Click to collapse
XDA:DevDB Information
Phoenix Kernel, Kernel for the Moto X Play
Contributors
AnoopKumar, squid
Source Code: https://github.com/HelllGuest/phoenix_kernel_lux
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2015-10-24
Created 2015-10-24
Last Updated 2016-02-18
Change log
v1.0 2015 October 24
Initial release
v1.1 2015 November 03
Up to date with Squid Kernel
Added frandom
Network speedup tweak
kernel/sched/fair: reduce latency
power: process: drecrease time to enter sleep
defconfig Enable NTFS,CIFS
Added intelliactive - Paul Reioux
Added smartass2 - Erasmux
Added bluactive - Mike Chan,engstk
Added interactive_pro - Mike Chan
Added smartmax-maxwen
v1.2 2015 November 14
Up to date with Squid Kernel
Added Bricked Hotplug - showp1984
Added MSM Hotplug - myfluxi
Disabled IOSCHED_TEST
v1.3 2015 November 26
Updated Lionfish
Wake mod s2s added
Disabled Bricked Hotplug and added MSM Hotplug as default
v1.4 2015 December 26
Up to date with Squid Kernel
Reduced swappiness to 30
Reduced lag
Some minor fixes too
v1.5 2016 February 08
Up to date with Squid Kernel
Linux 3.10.96
Reduced lag
Improved smoothness
Updated Powersuspend
Adreno idler by arter97
320K AAC Encoding
SELinux: permissive
Compiled with Phoenix GCC 5.2
v1.6 2016 February 18
Up to date with Squid Kernel
Overclocked CPU + GPU
Added zzmoove - Zane Zaminsky
alucard - [email protected]
barry_allen - Javier Sayago
bioshock - James Jamison
Added support for CRC Toggle
Optimized Console FrameBuffer for upto 70% increase in Performance
Optimized Integer SQRT. for upto 3x faster operation
Optimized Task-Search for upto 6% increase in Performance
Reduced RQ Lock-Contention for upto 0.7% increase in Performance
Enabled High-Priority WorkQueue for DevFreq
Fixed High-Load Average due to Drivers
Fixed Reporting of GPU Frequency
MSM_HOTPLUG: min 2 cpu while screen off
msm8939: overclock lux big cluster to 1709 MHz
msm8939: overclock lux little cluster to 1209 MHz
msm8939: overclock GPU to 700MHz
Aren't hotplugs like MSM hotplug, bricked hotplug etc. meant for qcom quad core/krait CPUs? I'm not sure how they'd behave on big.LITTLE. Even the governors, I'm not sure they are adapted to big.LITTLE.... could you shed some light on it? Also, your commit history looks like a kang job.... you should clear that out.
Just tried it and now my phone is rebooting every 30 seconds, clearly there are some problems.
Even flashing other kernels or the stock one from cm 12.1 isn't working ( I also restored the libs ), I had to flash the rom again with a full wipe, sorry but had no time to make a logcat.
It looks like kanged only because I manually committed changes from Yu Yreka's custom kernel source... Because I'm having slow Internet connection. Credits are given in the thread.. I think hotplug is working...
AnoopKumar said:
It looks like kanged only because I manually committed changes from Yu Yreka's custom kernel source... Because I'm having slow Internet connection. Credits are given in the thread.. I think hotplug is working...
Click to expand...
Click to collapse
Tbh cherry-picking commits doesn't need a fast internet connection. (I myself have picked commits on a 512 kbps internet) and credits need to be given in the commit, otherwise it counts as a "kang".
Also, credits for bricked hotplug and alucard hotplug etc. haven't been given even in the thread.
Pardon me.. I will fix it give me some time
AnoopKumar said:
Pardon me.. I will fix it give me some time
Click to expand...
Click to collapse
No problem. Just wanted to alert you, because there are a lot of wolves out there who'll trouble you a lot for unretained commit authorship.
Nice work AnoopKumar. Added to index
eskamhl said:
Just tried it and now my phone is rebooting every 30 seconds, clearly there are some problems.
Even flashing other kernels or the stock one from cm 12.1 isn't working ( I also restored the libs ), I had to flash the rom again with a full wipe, sorry but had no time to make a logcat.
Click to expand...
Click to collapse
Thank you for the feedback.. Some issues are removed and added new zip
Quasar said:
No problem. Just wanted to alert you, because there are a lot of wolves out there who'll trouble you a lot for unretained commit authorship.
Click to expand...
Click to collapse
Bro removed all kanged commits.
Perfect, working 100%!!
Amazing Kernel! Kernel running smoothly, show the ball ! All that remains is to add Faux'123 Sound Control functionality.
No more additional cpu governor on the last version?
Nico3d3 said:
No more additional cpu governor on the last version?
Click to expand...
Click to collapse
Actually I removed them because of some authorization issues...
Abravanelsenor said:
Amazing Kernel! Kernel running smoothly, show the ball ! All that remains is to add Faux'123 Sound Control functionality.
Click to expand...
Click to collapse
Stay tuned its coming in the next version.
AnoopKumar said:
Stay tuned its coming in the next version.
Click to expand...
Click to collapse
Possible to incorporate D2W?
Thanks :good:
possible installation in the RR 5.5.8 ? No Bootloop ?
FilipeRgz said:
possible installation in the RR 5.5.8 ? No Bootloop ?
Click to expand...
Click to collapse
Currently i'm on pac rom, not faced any bootloop.
brom25 said:
Possible to incorporate D2W?
Thanks :good:
Click to expand...
Click to collapse
Im working on that too. Only sweep2sleep working now
AnoopKumar said:
Currently i'm on pac rom, not faced any bootloop.
Click to expand...
Click to collapse
I'll back up and install for testing, thanks
Vision1 Kernel
Working with LineageOS (Sync with LineageOS Kernel Source)
Kernel Version : 4.4.83+
CPU up to little/big 2.0/2.6 GHz
CPU down to little/big 69/69 MHz (300/300 MHz _nuc version)
GPU up to 710 MHz
GPU down to 180 MHz
blu_active, alucard, ondemand, interactive, performance, conservative, powersave, ... CPU Governors - interactive default
ZEN, VR, FIFO, MAPLE, SIO, SIOPLUS and FIOPS IO Scheduler - MAPLE default
IOsched switcher
Adaptive LMK
more TCP Cong - Westwood default
Adreno Idler - default on
Adreno Boost - default off
Backlight dimmer option - default off
Workque Power Saving - default on
Tunable Wakelock
Input Boost - default on
Touch Boost - default off
Soundcontrol
KCAL
DT2W
Wifi driver from CAF
Stock Camera Driver <- use all camera and better picture quality
NTFS FileSystem R/W
SafetyNet patched
Working with Kernel Adiutor (I prefer EX Kernel Manager)
Anykernel Installer
Fingerprint is useable as Homebutton
optimized UBERTC 4.9.4 with mixed -O2/-O3 + pipe + graphite flag
more...
Be careful!!! Make backup before flash. Please report if you find an issue. Thanks
Download @ XDA
Download @ AFH
Thanks to:
LineageOS for base
@RenderBroken for EAS port
codeworkx for working on base
flar2 for patches
sultanxda for patches
UBERTC for toolchain
more
XDA:DevDB Information
[KERNEL][4.4.83+][LOS] Vision1 - fast/smooth/battery-friendly, Kernel for the OnePlus 5
Contributors
AuxXxilium
Source Code: https://github.com/AuxXxilium/kernel-msm8998
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: Vision1_2017_08_23
Stable Release Date: 2017-08-23
Created 2017-08-11
Last Updated 2017-08-23
Changelog and more...
Upcoming
Vision1_2017_08_XX
--- anything to do?
Changelog
Vision1_2017_08_23
first build after a complete rebase of the kernel. all upstream patches and the most CAF patches are done. clean merge with all commits.
old and stable WiFi driver
no CPU UC/OC
Vision1_2017_08_21 <- wipe cache
new EAS version with patches from RenderBroken
bring back interactive as default and iosched switch to go to noop if screen is off
WiFi driver update
only little changes
Vision1_2017_08_20
2 versions: a normal one and one without underclock.
CAF - reduced some voltages or make them dynamic
CAF - performance and camera related patches
Build System optimizations
Vision1_2017_08_19
Biggest Bugfix-Build ever
pocket judge working
removed cpu input boost from big cluster
removed temp throttle from big cluster
and much more...
Vision1_2017_08_18
Linux Kernel 4.4.83
go back to UBERTC 4.9.4 <- is smoother than 5.3
some little changes
Vision1_2017_08_17
use UBERTC 5.3
go back -Ofast -> -O2 for stability
battery optimization
more compiler optimization
fix a charging related bug
fix an input delay
tristate-key sync with LOS
remove old camera driver
VisionOne_2017_08_16
new Camera Driver - now we can use all camera
new WiFi Driver
more LOS changes
Careful please: there is a version with new and old memory setup. LOS uses from today the new memory setup. i build both versions because not all custom rom have ported this.
VisionOne_2017_08_15_new_wifi
updated wifi driver from https://review.lineageos.org/#/c/185015/
more...
VisionOne_2017_08_15 <- wipe cache please
Dash fixed
Deepsleep fixed
Fingerprint Homebutton is working with 20170815 build from codeworkx
synced with LineageOS upstream
new CPU Steps 69MHz, 160MHz, 230MHz
set Touchboost --> default off / CPU Input Boost -> default on
Linux Upstream 4.4.79 -> 4.4.82
optimized UBERTC 4.9.4 compiler
mixed -O2/-O3/-Ofast compiler flag for stabilty and speed
more compiler changes
more...
VisionOne_2017_08_13_CAF <- wipe cache after flashing
Sync with CAF Upstream
something more
VisionOne_2017_08_13
Linux 4.4.21 -> 4.4.79
some little fixes for more smoothness
VisionOne_2017_08_12_fix - 177xxx in Antutu - see Screenshots
fix build
faster boot
some little fixes
VisionOne_2017_08_11
initial build
Reserved
Wow!! You are the man who made the best lollipop rom for OP2
I'm going to flash this one, If something goes wrong you'll gift me a new 1+5=?...
Just kidding, Thanks @AuxXxilium..
Amazing
Enviado desde mi ONEPLUS A5000 mediante Tapatalk
I'm going to try this one out right now..Thanks for ur efforts.
angelmakumbe said:
Wow!! You are the man who made the best lollipop rom for OP2
Click to expand...
Click to collapse
thanks. nice to see someone knows me after a long time away.
tested the kernel briefly on Unofficial RR, the UFS speeds seem to be much better than LK or Carbonite... missing the home button though flashing like crazy today, can't catch a break
@AuxXxilium as you've stated in OP home button is not usable, But mine is working fine..
OMG, you are alive still? Used to use your kernel before I learned how to make kernels
AuxXxilium said:
thanks. nice to see someone knows me after a long time away.
Click to expand...
Click to collapse
I remember you from the G2 times too, I used to follow your work back then, I'm happy to see you again. I'll definitely try your kernel and keep my eye on this thread!
Glad to see more kernel devs are supporting us folks on LOS. Flashing this kernel presently.
DespairFactor said:
OMG, you are alive still? Used to use your kernel before I learned how to make kernels
Click to expand...
Click to collapse
i know it's a joke.
thanks.!!
best kernel!!!
AuxXxilium said:
i know it's a joke.
Click to expand...
Click to collapse
Not a joke at all, I used to use your kernel on Nexus 5, I think?
DespairFactor said:
Not a joke at all, I used to use your kernel on Nexus 5, I think?
Click to expand...
Click to collapse
Oh that is nice. Now you are a great dev.
AuxXxilium said:
Oh that is nice. Now you are a great dev.
Click to expand...
Click to collapse
Thanks I am just a noob haha, you didn't want to believe me
I'm running latest Codeworkx build. Home button doesn't work with stock or vision kernel, but works with lightning kernel. Don't know why
Please be careful. i removed the latest version - because it crashes the dash charge. search for the problem and will fix it soon.
Polonium Kernel is made with a view that it will give a more stable experience to users of j7-16 and It is to make a user more comfortable with his own device!
This kernel has undergone several days of test before releasing in the stable branch.
This kernel works with ALL ROMS. That being said all TouchWiz-N, Aosp oreo and nougat are supported
Quick overview of Features
Upstreamed to latest linux-stable-3.18.106 from 3.18.14
Improved interactive
List of CPU GOVERNOR
HTML:
alucard
barry_allen
bioshock
blu_active
conservative
dancedance
darkness
electrodemand
HYPER
impulse
intelliactive
intellidemand
intellimm
interactive
ironactive
lionheart
nightmare
ondemand
ondemandplus
ondemand_x
pegasusq
performance
powersave
relaxed
smartass2
smartmax
smartmax_eps
userspace
wheatley
yankactive
IO SCHEDULERS
HTML:
bfq
fifo
fiops
maple
row
sio
sioplus
tripndroid
vr
zen
noop
* Compiled with GCC version 4.9.x
* Frandom
* Low Memory killer
* Fsync toggle
* Dynamic Fsync
* lz4 compression
* Enabled Work Efficient Queue for cpu by default
* Disabled knox & tima
* SafteyNet patches
* Force permissive
* Disabled CRCs (30% performance boost)
* State Notifier
With many under the hood optimisation!!!
Downloads:
Latest version: Polonium V2 for all roms
* Please correct version according to your ROM/Android Version.
Old releases:-
Polonium V1
Please press the thanks button and If u like gift me a pizza or coffee
* paytm *
https://photos.app.goo.gl/olZEKE5OPqA5dEyZ2
XDA:DevDB Information
Polonium Kernel , ROM for the Samsung Galaxy J7
Contributors
abhayruparel, DarkLord1731, lzzy12
Source Code: https://github.com/redking12/polonium_j7xelte
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: v2.0
Stable Release Date: 2018-04-28
Created 2018-04-16
Last Updated 2018-08-30
Reserved
Reserved
Awesome work.Thanks)
Good job my friend
Great work bro. Finally custom kernel for AOSP based ROMs. ?
Good Job
Finally An Custom Kernel For J7 2016:fingers-crossed:
Will it work on the samsung stock ??
hi what improvements does the rom make that kernel? improves whatsapp's audio? can you play from the sd card with folder mount as 7.1.2 aosp? Is the problem of counting with parallel space fixed? From already thank you very much
Can you overclock it a little bit like in Oxygen Kernel? It'll be really helpful in gaming.
ahsan_ said:
Will it work on the samsung stock ??
Click to expand...
Click to collapse
Only for AOSP Oreo.
Very nice work and great effort for our j7 6 device.
install the kernel in the slimrom and I get out every time the systemui poster stopped working and the screen is all black. any solution?
Please add spectrum support, kernel manager
On cosmic os 3.1 it breaks certain apps (like electricity bill payment app that you cant log in anymore).
rainspx said:
On cosmic os 3.1 it breaks certain apps (like electricity bill payment app that you cant log in anymore).
Click to expand...
Click to collapse
I will try when it's stable and OC on cosmic os 3.1. Regards from Argentina
Polonium V2 with support for all roms
hey guys after a lot of work, efforts & time im releasing Polonium Kernel V2 which now has support for All TouchWiz, Aosp nougat and oreo support.
ChangeLogs:
* As always upstreamed to Linux stable version 3.18.106
* Revert BFQ as default
* Governor Whitelist for incomplete governors
* Misc. changes which leads to improvements
Download the correct version since now Polonium Supoorts AospOreo, Touchwiz-N & Aosp-N
Download Link
https://github.com/redking12/polonium_j7xelte/releases/tag/v2.0
Join the Telegram Group for testing and general talks or just wanna talk with me: https://t.me/polonium_kernel
abhayruparel said:
hey guys after a lot of work, efforts & time im releasing Polonium Kernel V2 which now has support for All TouchWiz, Aosp nougat and oreo support.
ChangeLogs:
* As always upstreamed to Linux stable version 3.18.106
* Revert BFQ as default
* Governor Whitelist for incomplete governors
* Misc. changes which leads to improvements
Download the correct version since now Polonium Supoorts AospOreo, Touchwiz-N & Aosp-N
Download Link
https://github.com/redking12/polonium_j7xelte/releases/tag/v2.0
Join the Telegram Group for testing and general talks or just wanna talk with me: https://t.me/polonium_kernel
Click to expand...
Click to collapse
Amazing job. Perfectly stable until now with Oreo Dot OS. Eliminated constant freezes of the previously tested kernel.
Polonium Kernel Manager app
Hello to all !
Which kernel manager app should I use in order to modify the Polonium Kernel settings ?
Thank you in advance !
Belfast82 said:
Hello to all !
Which kernel manager app should I use in order to modify the Polonium Kernel settings ?
Thank you in advance !
Click to expand...
Click to collapse
You can use Kernel Adiutor, from Play Store.
Introduction:
Affinity Kernel is a custom kernel based on the latest Stable Linux 4.4 release from kernel.org.
This kernel is developed with performance and great battery life in mind offering some goodies cherry-picked from other popular kernels such as Flash Kernel, ElementalX, blu_spark, Boeffla Kernel, Sultan Kernel and Franco Kernel.
The kernel is always up to date with mainline linux kernel and is regulary updated with the latest fixes.
The goal is to provide a butter smooth experience, simmilar to what you get with the latest Pixel devices.
Affinity Kernel is based on the official kernel source released by OnePlus.
Code:
/*
* Your warranty is not void (Thank you OnePlus!).
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
Upstreamed to the latest Linux Stable 4.4.x
Upstreamed to the latest CAF tag LA.UM.6.4.r1-11500-8x98.0 & LA.UM.7.4.r1-04800-8x98.0
Tunable with Kernel Adiutor and others
Additional CPU gorvernors
Sound Control
Adreno Idler by @arter97
Full WireGuard implementation
Sweep2Sleep gesture
Fast charging on USB
FS fsync toggle (enabled by default)
Additional IO schedulers (Maple, FIOPS, SIO, ZEN)
Qualcomm MDSS v2 (sRGB + KCAL)
dm(avb)-verity disabled
Faster app cold-launch
IO Tuning
Optimized with oFast and O3
Westwood TCP algorithm as default
Full Treble compatibility with Treble related fixes
Individual Input Boost frequency for each cluster
Disabled the BCL battery driver
Backlight Dimmer by @flar2
Boeffla Wakelock blocker v1.1.0
CDROM emulation
init.d support
ARM target optimizations
Passes SafetyNet check
Crypto Routines optimizations
High Brightness mode
Adreno driver improvements
EAS
Dynamic SchedTune Boost v3
KLAPSE Driver
Decreased swappiness
Installation:
Before you install the kernel, make sure you have
a backup of boot partition in case something goes wrong!
If you are coming from stock kernel:
Reboot into TWRP
Flash the Affinity Kernel.zip
Reboot
If you are coming from another custom kernel:
Reboot into TWRP
Dirty flash your rom or restore boot backup if you have any
Reboot recovery
Flash the Affinity Kernel.zip
Reboot
Updating:
Just flash the latest Affinity Kernel build over the previous one
Downloads:
{Mod edit}
On ROMs like Dirty Unicorns, WLAN won't work because the wlan module is required
to load on device initcall rather than late initcall like other ROMs do. There's a workaround for it but
it breaks WLAN on all ROMs that have the module built inline or the CAF way
{Mod edit}
Thanks to:
@joshuous for his EAS commits and Dynamic Sched Boost
@osm0sis for his AnyKernel2 installer
@nathanchance for his android-linux-stable project and helping me
@Lord Boeffla for Boeffla Wakelock Blocker and LED control
@Sultanxda for his fixes and other stuff
@eng.stk for his tweaks
@flar2 for his Sweep2Sleep gesture driver
@tanish2k09 for KLAPSE Driver
And all those folks contributing to Linux Kernel
XDA:DevDB Information
Affinity Kernel, Kernel for the OnePlus 5
Contributors
LinuxUser0227
Source Code: https://github.com/hejsekvojtech/Affinity-OnePlus5
Kernel Special Features: Fast, Battery friendly, Stable, Up to date
Version Information
Status: Stable
Current Stable Version: r24
Stable Release Date: 2018-09-27
Created 2018-09-27
Last Updated 2019-04-06
Compatible with Magisk? If so dirty flash followed by Magisk fine? ?
New Kernel for OOS, amazing, i try this
thx a lot
Nice that you asked me whether you could use my mod... And not even thank me....
RogerF81 said:
Nice that you asked me whether you could use my mod... And not even thank me....
Click to expand...
Click to collapse
Sorry, I forgot. The thread will be updated
Im_Mattgame said:
Compatible with Magisk? If so dirty flash followed by Magisk fine?
Click to expand...
Click to collapse
Yes, you can flash Magisk after flashing Affinity Kernel
Nice I'm going to test it.
Added to the OnePlus 5 Index Thread here.
Affinity Kernel r2 is up!
This build includes just some small changes, mainly new IO schedulers and governors
Here's the changelog:
Enabled all TCP congestion algorithms (westwood is still default)
Enabled full support for Xbox gamepad
Added new IO schedulers:
SIO
ZEN
FIOPS
Added new governor - blu_active
Set Maple IO scheduler as default
Use the same input_boost values as Pixel 2
You can get it HERE
Dash charge doesn't work on r1.
obol2 said:
Dash charge doesn't work on r1.
Click to expand...
Click to collapse
Works for me on both r1 and r2
obol2 said:
Dash charge doesn't work on r1.
Click to expand...
Click to collapse
everything works great!
Khaos said:
Yes, you can flash Magisk after flashing Affinity Kernel
Click to expand...
Click to collapse
So if Magisk is already installed, do you have to flash magisk again after flashing kernel or do you have to uninstall/reinstall after Affinity?
Thanks
bigjailerman said:
So if Magisk is already installed, do you have to flash magisk again after flashing kernel or do you have to uninstall/reinstall after Affinity?
Thanks
Click to expand...
Click to collapse
Nope, you don't have to reflash Magisk after installing Affinity
Thanks for fast reply!!
new kernel! i try it
Affinity Kernel r3 is up!
Here's the changelog:
Upstreamed to Linux Kernel 4.4.159
Added Backlight Dimmer
You can get it HERE
with r3 my phone reboot alone
gege0202 said:
with r3 my phone reboot alone
Click to expand...
Click to collapse
What do you mean ? Does it not boot ? Or does it go in a loop ? Does it give you a blue led black screen ?
Please be more specific
Thanks for your work. I'm using this kernel with Oneplus 5T OB17 and works great.