im a chinese user and when i updated my r950 to lastest version MB1, i can not use my 3g in any way.
so i tried to go back old version official rom.
but odin said sboot.bin fail ...
so now i can only call and message..
i search the internet and found that sumsang changed new bootloader in new version so when i try to flash a old version rom ,it cant be done.
and i found that many chinese users are get in this trouble either..
and cuz few user in chinese who use r950.so no one can solve this problem..
can any developer gives a help?
big thanks....
.......i just want a old bootloader of usc-r950!!! thank u so much!!
sasgilf said:
im a chinese user and when i updated my r950 to lastest version MB1, i can not use my 3g in any way.
so i tried to go back old version official rom.
but odin said sboot.bin fail ...
so now i can only call and message..
i search the internet and found that sumsang changed new bootloader in new version so when i try to flash a old version rom ,it cant be done.
and i found that many chinese users are get in this trouble either..
and cuz few user in chinese who use r950.so no one can solve this problem..
can any developer gives a help?
big thanks....
.......i just want a old bootloader of usc-r950!!! thank u so much!!
Click to expand...
Click to collapse
but odin said sboot.bin fail
me too.but me is L900. odin LJ1 SPH-L900_L900VPALJ1_L900VPALJ1_L900SPTALJ1.tar.md5 odin sboot.bin fail.too
Hi everybody !
I have a S4 mini 16gb (GT I9195) locked Verizon. I bought it in hong kong and the problem is that there was already a Custom Rom on it.
I tried to install many ROMs (french and german version) with ODIN to have the menu in french (I'm from Paris). I didn't tried operator one's, only constructor one's and it has always failed.
I tried many ROMs, cables, many version of ODIN and many USB plug but nothing changed it's still stucked on NAND Write fail on the ODIN report.
I think my only option is to flash the PIT and to install a new rom. Many question about it :
Am I right about flashing the PIT ?
Do the PIT have to match with a special ROM when using it with ODIN) or any ROM for S4 mini while match wit a good PIT file?
The biggest problem is that I only found one PIT file corresponding to this phone and it failed. Nothing happened. Is any of you has a PIT file ok ?
Thanks for your help and sorry if my english is not perfect.
What firmware version you have?
I think i9195 is international not carrier specific, then you could flash any firmware as long as you're not downgrading bootloader (Odin will fail downgrading)
Can you post your download screen.
Help!!! please!!!
fburgos said:
What firmware version you have?
I think i9195 is international not carrier specific, then you could flash any firmware as long as you're not downgrading bootloader (Odin will fail downgrading)
Can you post your download screen.
Click to expand...
Click to collapse
Sorry for the late answer, I've been really busy at Work.
I have the 4.2.2.
I tried with many versions of firmware (even the latest downloaded on sammobile but always failed.
I don't know what download screen you want (sorry i'm a total noob).
When I try to flash the PIT Odin fail with this message : "Set PIT file" and the "Fail!". On the Phone i have this message on the download mode screen "Secure check Fail : PIT".
I don't know if it helps.
Its been awhile since I've done my firmware, but I'm giving my phone over to my sister soon and upgrading to a Note Edge.
I'm trying to get this phone on Likewise S5, but having a little difficulties with the older guilds to install various stuff, also all the warning on the Likewise S5 don't show up in the guide I was following for the actual installation, like stuff about bootloaders and modems (I don't know what these are), I am a techy just I'm not well versed in Cellphone Firmware talk at all, more of a PC person.
This was the guide I'm following well can't link it, its on Team android, for the likewise S5 for S3 i747
I'm Trying to install CWM Because I believe I don't have one currently installed, if I do is there a way I can find out? all I believe I have is just a oem 4.1.2 firmware that was rooted.
Almost all the CWM guides that are out have their own downloads that no longer work for the CWM that they provide, and honestly I don't wanna mess with it anymore and want to get the proper combination, I've downloaded the latest one for Samsung Galaxy S3 from the Official Clockwork mod website for Touch version, but I'm not sure how to flash "that" I know it says to use PDA on 1.85 Odin which i've tried but it just says
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<OSM> All threads completed. (succeed 0 / failed 1) (No pass or fail)
I'm not sure what I'm doing at this point and could really use some help, specific to what I'm doing.
And to be specific I have a Samsung Galaxy S3 i747 From Rogers Wireless in Canada (Sept 2012), and it isn't bricked have booted it up just fine.
Currently I am dealing with a finnicky USB port as well, need to get some alchohol and see if I can get a more reliable connection out of it. I got it to point now I feel like I'm comfortable flashing it just eh, could be better, long as its sitting generally its connected slight pressure in cord to be sure, usually charges no problem but USB connectivity is whats finnicky. I cleaned out the lint with a needle didn't really seem to help a whole lot but definetly lets the plug go in further now, even bought a new cord that gets a decent click but it still a little floppy side to side, feels like its the plug has room to move inside the female end of the plug, vs anything being "loose"
Any chance your phone is already rooted? Odin flashing anything with a flaky USB port would make me a little nervous.
If you're rooted, there's an app called flashify that makes updating recovery pretty simple and there is no USB connection needed.
Also in the Play store if you search for Samsung Phone Info you should find an app that will tell you what firmware you're on. Install it and report back what it tells you you're on for bootloader and baseband and someone here should be able to chime in on whether it will run newer roms ok, or how to proceed if its out of date.
jason2678 said:
Any chance your phone is already rooted? Odin flashing anything with a flaky USB port would make me a little nervous.
If you're rooted, there's an app called flashify that makes updating recovery pretty simple and there is no USB connection needed.
Also in the Play store if you search for Samsung Phone Info you should find an app that will tell you what firmware you're on. Install it and report back what it tells you you're on for bootloader and baseband and someone here should be able to chime in on whether it will run newer roms ok, or how to proceed if its out of date.
Click to expand...
Click to collapse
I am already rooted I know that I did the root myself, to get Super admin permissions for the Ps3 controller blutooth controller permissions.
I'll look into Flashify, I'll install phone info now
Ok here is from my Samsung phone info app;
DMF1 firmware is pretty out of date. Unless you pick an older build of a custom rom, you'll run into some issues.
The full Canadian carrier updates for i747m are all available for download from sammobile.com, but those will be really big files to flash with Odin. I wouldn't try that unless you're really confident in that USB port. This won't be a really quick flash and interrupting it could brick your phone.
The safest route might be to unroot the phone and take carrier OTAs until your firmware is up to date. You'll have to be on stock recovery for OTAs. Once you're unrooted if you power down and reboot your phone, I'm pretty sure the stock recovery will come back. If not, here's a link to a stock recovery: http://forum.xda-developers.com/showthread.php?t=2026751
To get going with rooting and custom roms again you'll have to flash a custom recovery in Odin once you get up to date on OTAs, but that will be a 5 - 10 MB file to flash as opposed to a 1 GB+ full system update. Don't worry about that until you get the bootloader and modem up to date, one step at a time. :good:
How do I perform an update though to manually update the phone, like to unroot it basically I'm Connecting it to USB getting it to recognize in Kies?
Like I have full USB access to my phone now, yes the port is flaky but it functions. Kies says my device is on latest firmware even though I know 4.4.2 was released by rogers for the device, i.e I don't understand how to unroot it and bring it up to date
I don't know what a OTA is, I don't understand what a modem/bootloader is etc.
I'm assuming what I have to do is update it to 4.4.2 via the normal firmware but currently it isn't giving me an option to
OTA is "over the air" updates. They are pushed to your phone and often update your phone's bootloader, modem, and rom to new versions. They'll download and install with wifi or cell data, no USB connection required. It is a very safe way to update your phone, but OTA updates will fail if you are rooted and have custom recovery (at least AT&T's will).
With android 4.1 and DMF1 firmware you're something like 2 or 3 updates out of date. Usually OTA notifications just pop up on their own, or you might have a "check for updates" option somewhere in your rom settings. Has this phone been off the grid for a while, update process frozen, or just declining OTAs for the last year and a half or so? Is it not tied to a carrier anymore?
I have updated bootloaders and modems outside of the OTA process, but only on the i747 AT&T variant. If OTA is not an option for some reason, I can't comment on what your safest route would be on the Canadian variant, but there are plenty of expert i747M users on here. Someone will chime in to help you out.
If OTA is an option, then the easiest way to unroot used to be to install SuperSU from the Play store, if you're not already using it. In SuperSU settings there used to be a "full unroot" option.
Ok So what do I need to do exactly I unrooted the phone no problem but it still doesn't recognize it as needing new firmware still so I'm still confused how to update it.
My understanding is I need to update this to latest base version which would be 4.4.2, but I'm not sure how to do that exactly since its not automatically doing it given the custom rom.
Confirm the bootloader on your phone and post it here.
It is the bootloader that will determine which stock firmware to flash from sammobile.com onto your i747m.
audit13 said:
Confirm the bootloader on your phone and post it here.
It is the bootloader that will determine which stock firmware to flash from sammobile.com onto your i747m.
Click to expand...
Click to collapse
Again, I'm not well versed in android terminology etc, I don't really know what a bootloader is, everything in those screen caps above is what I'm using
If you want to be on the latest stock, just use Odin to flash the stock Rogers 4.1.1 ROM from sammobile.com. Then use OTA updates to update the phone to the latest KK.
audit13 said:
If you want to be on the latest stock, just use Odin to flash the stock Rogers 4.1.1 ROM from sammobile.com. Then use OTA updates to update the phone to the latest KK.
Click to expand...
Click to collapse
Again, I Really Need more details Odin isn't so simple that its Oh Slot dis dat flash in der and poof completeo, if you read through the thread you'd you I have a flaky USB port that isn't 100% stable, flashing a 1gb rom through a iffy connection doesn't sound smart.
How do I flash this correctly from SD card if I can?
Please describe, Which App I need for it, what I need to do in app etc, cuz Odin is like AD AP DS WE aslaksd its all gibberish to me unforunately for different flashing locations
I know of no way to flash a completely stock ROM from an SD card.
If you wanted to flash it from an SD card, you would probably need to download the entire ROM, strip out the stock recovery, and re-pack the ROM into a zip file.
I'm still extremely confused, I need consise directions what I need to do, so far I haven't had solid details in this thread yet how to get my firmware installed :crying:
Evockzi said:
I'm still extremely confused, I need consise directions what I need to do, so far I haven't had solid details in this thread yet how to get my firmware installed :crying:
Click to expand...
Click to collapse
since youre computer literate , so to speak , perhaps this method would help/be more 'simple'. IDK , just a thought.
http://forum.xda-developers.com/showthread.php?t=2225405
"all i can really do , is stay out of my own way and let the will of heaven be done"
Is that method compatible with my device? before I've only been following ones that flash with odin.
The Reason why the isn't helpful immediately for me, I Do Not Know what I need to Do to achieve what I need.
Bootloader means almost nothing to me, I do Not know what I need to accomplish, No one has answered that question yet for me.
My Question is again, So, Do I need to install 4.4.2 Base as downloaded from that Samsmobile, and How Do I install Specifically that?
Beyond That my question expands into, Ok After I install that What do I need to do to install likewise.
I Do not know what I need to do so all these guides about doing specific tasks that you know what you need to do are useless to me at this moment I'm afraid.
I have enough of a stable USB connection I can Odin it Right now I just need to know what to select, etc
I yolo'd it with the connection, and flashed it with older odin 1.85 since I know PDA is the correct one idk what the hell it is in the new odin.
Passed, took almost 8 mintues to flash it, Now I just need to get back to original question of installing CWM Recovery and Getting Likewise S5 rom installed.
Do I have correct 4.3-4.4 Modem and boot loader that it spams in bright red on the likewise requirements?
Managed to finish all the installations without a hitch,
Followed a guide to CWM install and then root it through installing SuperSU, Then had everything to install Likewise which can be done on the device.
Everything installed perfect now I have a S5 to give to my sister cheers
@Evockzi glad you got it figured out.:victory:
"all i can really do , is stay out of my own way and let the will of heaven be done"
Hi I have Galaxy Note 8 everytime i try flash firmware to downgrade it keeps failing in odin even in prince comsey how do I fix this? Im trying to change my carrier and thats all im trying to do. Im on firmware N950USQS4CRE1 thanks
Same issue here. Anyone have an idea?
I believe you cannot downgrade the firmware if you already have the latest v4 firmware (N950USQS4CRE1). From what I can gather, if you are are on oreo, you do not need to use the carrier switching method to switch between carrier. If the phone is sim unlocked, you just pop in another carrier's sim and it should work.
prosown said:
Hi I have Galaxy Note 8 everytime i try flash firmware to downgrade it keeps failing in odin even in prince comsey how do I fix this? Im trying to change my carrier and thats all im trying to do. Im on firmware N950USQS4CRE1 thanks
Click to expand...
Click to collapse
samsung knox has it so you cant reverse as i was told. it also prevents void of warranty and catastrophes like bricking.