Hi guys i recently tried to update my s6 edge g925i
From 5.0.2 to 6.0..after this my phone had a blue screen
I tried flashing stock roms and twrp each all faild i cant used kies or smartswitch as they both say device is not supported.. no rom or anything flashed with oden it just fails.. i also see another error somthing about binary 3..
Please help
also my phone is australian and with optus if that helps
I have read all threads pretty much done most methods
Related
My s6 edge is rooted so I know that OTA update wont work but neither will SmartSwitch. It just doesn't say an update is available. I found an official 5.1.1 stock file but it says 18 hours to download because it is filegator and ul. Is there any other way I can update? Any faster link?
smoosani97 said:
My s6 edge is rooted so I know that OTA update wont work but neither will SmartSwitch. It just doesn't say an update is available. I found an official 5.1.1 stock file but it says 18 hours to download because it is filegator and ul. Is there any other way I can update? Any faster link?
Click to expand...
Click to collapse
The safest way to update would be to unroot, do a factory reset and wait for ota.
At present there is no advantage to rooting, TWRP is not being developed, no custom roms to install and if you get frp lock you will brick your phone.
Pp.
There is twrp for 5.1.1 and I have a custom 5.1.1 rom on my tmobile s6 edge as we speak...if you need some help after searching the threads I could point you in the right direction!
lewi1032 said:
There is twrp for 5.1.1 and I have a custom 5.1.1 rom on my tmobile s6 edge as we speak...if you need some help after searching the threads I could point you in the right direction!
Click to expand...
Click to collapse
Here's a side note on "custom roms".
Hello! This is my first post, please move my thread if I posted it on the wrong place.
Issue:
Tried to root a costum rom for my S6 edge. I used ODIN to root BL and a modem. A message came up "Custom binary blocked by Reactivation Lock". Went i booted my phone up, it's stuck on Samsung Galaxy S6 edge screen. A red text in the upper left corner says "Kernel rev. Check fail. Device: 2, Binary: 1"
So the problem is I can not boot my phone. Tried to download stock firmware and root it via Odin. Did not work. I can not get into recovery mode either.
Please help me. My phone is stuck and can not be used.
Kind regards. 
http://forum.xda-developers.com/showthread.php?p=61975955
Pp.
First of all thanks for passing by my thread , my case is a really strange one , i have an galaxy s6 edge t mobile with DOJC wich is the lastest build , i unlocked thru a direct cable software method provided by unlockbase , as always i rooted the phone , i used unikervel ver 8.0.0.2 and did the unlock , problem is that the fingerprint stopped working forever eversince , and no matter what i do it just displays the same error " an error ocurred with the fingerprint sensor " now i tried everything in my knowledge and google researching , tried the erasing cache method , flash stock bootloader and system plenty of time , downgraded a tons of times even installed a custom rom to see if there was any change , it was working before so im wondering what could happen , ive done this with multiple s6 edge with older builds and never has happened to me , today i downgraded againg do DOl1 and something more weird happened , the imei is there as always but the numbers after the slash are gone says /null now this hasnt affected anything but i dont know why it happened , the second werdiest thing its that the sensor version , in the secret menu for testing everything gives me a null version , does anybody know what can i do to get my fingerprint working againg ?? every lil comment would help thanx a lot
Sorry to hijack his thread. But I see you got root on the tmobile dojc firmware.
I got the edge today and have been going through post trying to figure out what needs to be done.
I know that two needs to be flashed through Odin. Not sure on the version tho.
And that a kernel needs to be flashed then the SU.zip
My question is what kernel. No one specifically says which one to use for the DOJC firmware and the BL option in Odin is where the kernel would go correct?
So
Odin -install tarp
Odin- kernel
And then flash the su zip in twrp
Am I missing anything ?
And hope somebody chimes in to help with your issue at hand ! Good luck
There no need my friend , just flash unikernel Ver 8.0002 thru odin adn the phone will be instantly root
epicroot said:
Sorry to hijack his thread. But I see you got root on the tmobile dojc firmware.
I got the edge today and have been going through post trying to figure out what needs to be done.
I know that two needs to be flashed through Odin. Not sure on the version tho.
And that a kernel needs to be flashed then the SU.zip
My question is what kernel. No one specifically says which one to use for the DOJC firmware and the BL option in Odin is where the kernel would go correct?
So
Odin -install tarp
Odin- kernel
And then flash the su zip in twrp
Am I missing anything ?
And hope somebody chimes in to help with your issue at hand ! Good luck
Click to expand...
Click to collapse
Installing stock kernel should make your fingerprint scanner work. Once you change the kernel, poof no scanner.
Pp.
Thanx for the reply my friend i did that alredy still does not work i think it just broke the moment i rooted coincidentially
PanchoPlanet said:
Installing stock kernel should make your fingerprint scanner work. Once you change the kernel, poof no scanner.
Pp.
Click to expand...
Click to collapse
I recall reading somewhere that not tripping knox when rooting had something to do with scanner not working.
Did you "not" trip Knox?
Pp
Have had this happen with some of my customers. Flashing stock firmware solved the issue.
Can download stock OJC here
STOCK OJC DOWNLOAD
I recommend Odin 3.10.6
ODIN 3.10.6
hello guys,
recently i was trying to update my phone from android 5.1.1 to 6.0.1, i have a problem with my phone aparently the one who sold me the phone changed the imei and when i update my phone got stuck on the android system recovery screen and at the bottom of the screen i had a message about "DRM FAILED CHECK YOUR DRK FIRST".
well after a few days of investigation i found a solution that i would like to share, since i havent found any other thread about fixing this phone directly.
ok instructions:
- Download the stock rom 5.1.1
link (http://forum.xda-developers.com/s6-...-edge-plus-t3194607/post66036193#post66036193)
- Flash a Custom Kernel
link (http://forum.xda-developers.com/att...t/g920a-g925a-g928a-kernel-auto-root-t3329792).
like you see for this you have to downgrade to 5.1.1 but in my opinion is better than have the phone not working at all.
Any question do not hesitate to ask.
Drk error
Help.galaxy s6 plus g928a marshmelow instal boot drk error.
hasanduva said:
Help.galaxy s6 plus g928a marshmelow instal boot drk error.
Click to expand...
Click to collapse
i dont quite understand your problem
Is there a way to fix drk G928A
tried the combination
I tried kernel root
Much help will be appreciated
Hi im new here, im not sure what i need to do.
Let me explain, i got a s6 edge from t-mobile unlocked with android 5.0 then i installed the new firmware originial 7.0 for t-mobile version. After that, the phone lost signal. Now i would like to install another firmware but i cant because in Odin appears sboot.bin error and in my phone screen appears fail bootloader. Could someone explain me what i need to do to install again ??
Its necessary have root??
i am having the same problem so perhaps ill do some forum searching and try to find an answer...we cant both be the only ones, right?
I was trying to root my samsung galaxy a5 2017 with TWRP and I accidentally deleted system data. Then, I tried rebooting the phone and it got stuck in a bootloop. To fix this problem I tried flashing stock 8.0 firmware from sammobile via odin and I got this error:
Sw rev. Check fail. Device: 6, binary 5. I think that this means I have to flash the latest stock firmware but there isn't a newer one.
After that, I tried to use my phone by flashing a custom rom (Lineage 15.1) and I discovered that I have no imei,no baseband and no ip adress. I have installed many custom roms but the issue is still there. I am trying to get my phone to work with stock firmware and fix the IMEI issue but odin wont let me flash because of that error. I would appreciate if anyone could help. Thanks.
Flash a firmware version that contains S6 or U6 in the middle, it won't work with U5/S5! Not the Samsung phone S5 or S6, but rather, the firmware version.
For cellular, change the modem firmware, or backup and wipe /data/. /data/data/?.
Unless the efs was wiped (probably not if the baseband version isn't there, load a backup then, only if the efs was wiped don't restore it otherwise, and it must not be a backup created with an older twrp, view the recovery log in the backup folder)
julianmunozvaras said:
I was trying to root my samsung galaxy a5 2017 with TWRP and I accidentally deleted system data. Then, I tried rebooting the phone and it got stuck in a bootloop. To fix this problem I tried flashing stock 8.0 firmware from sammobile via odin and I got this error:
Sw rev. Check fail. Device: 6, binary 5. I think that this means I have to flash the latest stock firmware but there isn't a newer one.
After that, I tried to use my phone by flashing a custom rom (Lineage 15.1) and I discovered that I have no imei,no baseband and no ip adress. I have installed many custom roms but the issue is still there. I am trying to get my phone to work with stock firmware and fix the IMEI issue but odin wont let me flash because of that error. I would appreciate if anyone could help. Thanks.
Click to expand...
Click to collapse
You aren't flashing the current version of software.
Sent from my Samsung SM-A520W using XDA Labs
iloveoreos said:
You aren't flashing the current version of software.
Sent from my Samsung SM-A520W using XDA Labs
Click to expand...
Click to collapse
I tried installing the latest version available and I had the same error.
julianmunozvaras said:
I tried installing the latest version available and I had the same error.
Click to expand...
Click to collapse
Well, I don't know what else could be wrong.
Sent from my Samsung SM-A520W using XDA Labs
julianmunozvaras said:
I tried installing the latest version available and I had the same error.
Click to expand...
Click to collapse
Listen to me, it happened to me 2 days ago, and I came to the conclusion that I was not flash the latest firmware. You need to flash the same firmware with the same bootloader or more recent, the error you receive is because you are flashing an older version of bootloader. Do one thing, type the code *#1234# on the phone keypad
mark the code that gives you on 'AP and look it on Sammobile at https://www.sammobile.com/firmwares/galaxy-a5/SM-A520F/ITV/ select your language and look for the firmware with your own code . You will see that odin flash it.
Samsung A520F Custom Binary Error
Hello please I have been trying to reload my Samsung A520F firmware for a couple of weeks
It all started with the phone trying to update (over WIFI) and somewhere along the line files must have gotten corrupted
This led to the phone constantly restart and shutting down applications
I decided to just download the firmware and use Odin to reload. This, unfortunately, didn't go so well as now the phone isn't starting up anymore but can still get to download mode.
PDA firmware is A520FXXUACSE6
Region is EUR
Network is OPEN
every time I use this firmware I get the error
" Custom binary (BOOT) Blocked by FRP Lock
Please note currently at the moment phone refuses to boot up I read about removing OEM lock and don't know if this is the problem.
Please could you help out
koolblowkid said:
Hello please I have been trying to reload my Samsung A520F firmware for a couple of weeks
It all started with the phone trying to update (over WIFI) and somewhere along the line files must have gotten corrupted
This led to the phone constantly restart and shutting down applications
I decided to just download the firmware and use Odin to reload. This, unfortunately, didn't go so well as now the phone isn't starting up anymore but can still get to download mode.
PDA firmware is A520FXXUACSE6
Region is EUR
Network is OPEN
every time I use this firmware I get the error
" Custom binary (BOOT) Blocked by FRP Lock
Please note currently at the moment phone refuses to boot up I read about removing OEM lock and don't know if this is the problem.
Please could you help out
Click to expand...
Click to collapse
Obviously you are frp locked. But I didn't think that blocked from flashing official.