[Question] OTG HOST MODE + Charging Simultaneously on 5t? - OnePlus 5T Questions & Answers

Hi,
I've been doing some research on using an OTG USB-c cable/hub/y-splitter for data and simultaneous charging capabilities for the 5t. After sifting through forums and Google, the issue is the 5t can't use OTG data transfer and charge itself at the same time; it can only do one or the other (confirmed with my own experiences). I read that the cause might be because of the stock kernel not allowing for this. Would anyone know of a custom kernel for the 5t that allows OTG Host mode and charging simultaneously?
My use case would be to use my 5t to hook up a USB DAC over OTG cable/hub/y-splitter and then use the other USB port to connect to a wall charger to keep my phone charged while using the DAC. It could also be used for other devices that connect over OTG without draining your phone battery for extended use.
- Thanks

Related

[Q] Has anyone managed to get USB OTG + Charging working (preferably in software!)

I've searched and found various posts from a long time back that seem to imply it's possible but haven't been able to find anyone saying they've actually done it.
I want to be able to use an OTG cable with a usb y cable, to allow me to plug in a usb device and charger at the same time. Note I want to charge the phone itself, I am not trying to supply power to the usb device.
International HOX running CM11 latest monthly, in case it's relevant.
(I'm retiring my HOX and thinking about using it as a mini server - I want to plug in ethernet by USB adaptor to provide the network and charger to keep the phone running 24/7 )

Use USB-C On the go (OTG) and power charging simultaneously?

Hello out there.
Has anybody figured out a way to using a USB-C On the go (OTG) adapter for OTG functionality, and get power charging working simultaneously?
I have seen some people have had success using USB Y cables with micro-USB OTG, but haven't read anything confirming this works or is even required using USB-C compatible phones such as the Nexus 5x. I saw some Startech Y cables are available for purchase and some dodgy homebrew setups which I wouldn't attempt personally!
I have a USB-C OTG connector and a mains powered USB 3.1 hub. With this setup I can charge or use USB devices successfully on the phone, but it's one or the other, not at the same time. I'm forced to choose the USB charging option on the phone to switch between the two.
Any thoughts or experience on this using a Nexus 5x or similar? Cheers!
And sort of related - new Macbook can drive an external display over USB-C. Can Android / Nexus 5x?
I have also been looking for this - to allow always-on wired ethernet. Have not found a solution. My Nexus 5X will last for several days when the ethernet adapter is externally powered by a hub, however. The trick is to make sure nothing is running except essential comms and email when on standby. The new Marshmallow Developer mode allows this, by selecting most apps to be 'inactive' during standby and only allowing one app to run at a time. My phone runs for weeks at a time in standby when there are no ethernet connected and no WiFi/4G. Connecting wired ethernet cuts that to about 7 days, depending on email notification activity.
trevmar said:
I have also been looking for this - to allow always-on wired ethernet. Have not found a solution. My Nexus 5X will last for several days when the ethernet adapter is externally powered by a hub, however. The trick is to make sure nothing is running except essential comms and email when on standby. The new Marshmallow Developer mode allows this, by selecting most apps to be 'inactive' during standby and only allowing one app to run at a time. My phone runs for weeks at a time in standby when there are no ethernet connected and no WiFi/4G. Connecting wired ethernet cuts that to about 7 days, depending on email notification activity.
Click to expand...
Click to collapse
I'm on the same boat, needing to have a Nexus 5X connected via Ethernet and powered.
So far I've tried:
- a USB Type C to USB female OTG cable
- a USB Type C to microUSB adaptor via a Dell powered USB OTG cable and a powered Acasis OTG USB Hub
but I got the same behaviour:
- USB OTG works with Ethernet and no power
- USB C to USB OTB HUB/powered OTG adaptor = power, but no OTG functionality
Is there a an updated USB C OTG pin out diagram available ?
(Similar to this one ? http://forum.xda-developers.com/showthread.php?t=2303902)

USB OTG split cable for charging and OTG device at the same time?

When I had my Nexus 5 I bought an OTG cable that had two inputs and claimed to allow charging of the Nexus 5 simultaneously with using an OTG device. It didn't work.
I want to use my Axon 7 with an external HDD for DLNA streaming of videos to my PS4, while also charging my Axon 7. Does anyone know of a split OTG cable that will work for this purpose? The external HDD does not have its own power source, and draws power from the phone. It works with an OTG cable I currently have (but does not have an additional input for charging the phone).
Thanks

USB OTG and Battery loading

Hi, talking about https://www.amazon.de/gp/product/B0...da3-4e84e7c49e87&pf_rd_r=MHRT4CYNH2P8AAHRC9FN
can i use a USB OTG device and charge the tablet simultaniously? I have an adapter therefore, but does the tablet support this?
Thanks

OTG host plus Charging at sametime Oneplus5T

Has anyone able to achieve OTG host mode plus charging on same time for oneplus5t devices? What I mean is to connect external USB devices like pendrive or mouse and the phone is charging at same time. I am able achieve this on my Samsung Tab T515 and A50s devices using Kingston Nucleum C-HUBC1-SR-EN 7 Ports USB Hub (White). When I use it with oneplus5t it does not work. I think we need some modifications in either kernel or something else. Can anyone guide me to do this?

Categories

Resources