Is it possible using this kind of converter to connect simultaneously a mouse and a keyboard together to the phone ? (for example using a wireless set mouse/keyboard or a usb splitter).
Can the phone provide the power to work on both devices ?
Maybe if it was possible to charge the phone somehow using the same cable ?
http://forum.xda-developers.com/showthread.php?t=1098778
I want to connect the phone to a tv using hdmi cable (adaptor) and control the phone from distance using a wireless keyboard/mouse.
thanks
I would be interested in this too. I saw EVO 4G used as a desktop computer - http://forum.xda-developers.com/showthread.php?t=1038840 but he used bluetooth mouse and keyboard and the only thing connected to its micro usb port was hdmi cable. I would rather use some kind of usb hub in order to connect these 3 devices to the micro usb port in the phone and even charge it all at once. If anyone knows if it is possible please share your knowledge
BT
Yes, you are right about Bluetooth. I believe it's the best solution (but more expensive) because when connecting the hdmi adaptor no other ports remain for other usb devices. Also hmdi adaptor charges the phone (for example BizLink MHL to HDMI TV-Out Adapter)
thanks
You might be able to run both USB mouse & keyboard; try using a keyboard that has a USB port or two on it, then plug the mouse into the keyboard's USB. Power may be a problem; the SGS2's USB connector isn't going to provide anywhere near the 500 mA in the USB 2.0 spec.
Of course, if you're using the USB, you can't use the MHL/HDMI, and vice versa -- the connector modes are mutually exclusive. If you have to have HDMI output, you should be able to use a BT keyboard and/or mouse.
Title says it all, has anyone tried this?
From what I've read (and the other threads on this topic) - no it can't be done.
It can't be done my friend
I got it to work
psycho1200 said:
It can't be done my friend
Click to expand...
Click to collapse
I used the following and plugged into my TV usb port and had ethernet (verfied with WIFI shut off) and it was charging.
USB 2.0 Ethernet adapter - <amazon.com/gp/product/B003VSTDFG>
OTG with power - <amazon.com/gp/product/B00C452XFO/>
Yup, this now works great for me too! :good:
I bought the Ethernet adapter Nvidia Recommends (same as browncoatdave's)
http://www.amazon.com/Plugable-Gigabit-Ethernet-Chromebook-Specific/dp/B003VSTDFG
And just whatever Y cable could find that didn't look uber cheap.
http://smile.amazon.com/gp/product/B00CXAC1ZW/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
What I have plugged into the shield
jjprichards said:
Title says it all, has anyone tried this?
Click to expand...
Click to collapse
1) 3 Port USB Hub
2) Plugable USB 2.0 to 10/100/1000 Gigabit Ethernet LAN Wired Network Adapter
3) Micro USB Host OTG Cable with Micro USB Power
4) Smart Touch Mini USB TouchPad Keyboard
5) Full Size trackball mouse
6) Charging cord
I am charging the battery with ethernet, keyboard and mouse plugged in.
No Problem. But this is also after the kitkat update which added the charging while ethernet is plugged in.
solidsn said:
1) 3 Port USB Hub
2) Plugable USB 2.0 to 10/100/1000 Gigabit Ethernet LAN Wired Network Adapter
3) Micro USB Host OTG Cable with Micro USB Power
4) Smart Touch Mini USB TouchPad Keyboard
5) Full Size trackball mouse
6) Charging cord
I am charging the battery with ethernet, keyboard and mouse plugged in.
No Problem. But this is also after the kitkat update which added the charging while ethernet is plugged in.
Click to expand...
Click to collapse
trackball mouse, why? gives me flashbacks of the 90s...
solidsn said:
1) 3 Port USB Hub
2) Plugable USB 2.0 to 10/100/1000 Gigabit Ethernet LAN Wired Network Adapter
3) Micro USB Host OTG Cable with Micro USB Power
4) Smart Touch Mini USB TouchPad Keyboard
5) Full Size trackball mouse
6) Charging cord
I am charging the battery with ethernet, keyboard and mouse plugged in.
No Problem. But this is also after the kitkat update which added the charging while ethernet is plugged in.
Click to expand...
Click to collapse
Did you plug all the devices in a particular order? I noticed that if I plug in my charger AFTER I plug in the OTG cable into the shield, then it is not charging. But when I plug in the charger into the OTG cable and then plug it into shield, it is charging.
Is your hub powered? What exact model is it? I am asking because I have very similar setup to yours but the shield does not detect USB devices connected to the hub - it's this one: http: // esperanza . pl/esperanza-usb-2-0-hub-4-porty-ea116,182,437.html
I can connect one usb device directly to OTG cable and it works, but when I connect a hub, it no longer works.
There is a cheap way to do this if you have the soldering skills, and are willing to try it.
Get a cheap USB "Travel" hub.
Open it up, and replace the Upstream USB cable with an OTG cable (A scrap Micro-USB cable may or may not work. The connector must be Properly wired for OTG).
Remove the main power diode in the USB hub, and solder jumper the 2 pads where it was. A Multimeter in continuity mode can help you find the right component, but it takes some experience. There usually is not much in a cheap travel hub, so I can usually find them just by looking, but like I say, only try this if you have the experience, and you know what you are looking for.
Power the hub through it's 5V power jack (if it has one), or you can add a power only micro-USB socket. (Only connect the (+) and (-) power pins, do not connect the data lines. Connect it to any one of the Full size USB port's power pins. Observe polarity.)
Voila! You now have 4 Full size USB ports, it will charge your device, and provide power (Up to the rated power of the AC adapter) for your USB devices.
I did this years ago in the Nokia 770 days. It was one of the first consumer devices that supported USB OTG. Article still exists here:
http://www.linuxslate.org/N770DockingStation.html (Scroll down to the "Electronic Components" Section)
Would this work?
Would this: SODIAL(R) Micro USB Host OTG Cable with Micro USB Power plus this: Anker® Unibody 3-Port USB 3.0 and Ethernet Hub
Give me the ability to charge tablet, use Ethernet and additionally connect USB mouse and keyboard, and possibly charge Nvidia Game Controller?
Or would it just be a waste of time and money
When I had my Nexus 5 I bought an OTG cable that had two inputs and claimed to allow charging of the Nexus 5 simultaneously with using an OTG device. It didn't work.
I want to use my Axon 7 with an external HDD for DLNA streaming of videos to my PS4, while also charging my Axon 7. Does anyone know of a split OTG cable that will work for this purpose? The external HDD does not have its own power source, and draws power from the phone. It works with an OTG cable I currently have (but does not have an additional input for charging the phone).
Thanks
I would like to be able to plug a USB cable into my pixel xl on my car and be able to charge the phone and play music.
My idea was to use a USB c hub with pd passthrough power. Plug in a DAC to the hub and a USB c charging cable to a cigarette USB c fast charger.
There are lots available for the Macbooks but will they work with the pixel? Does the pixel allow other devices whilst receiving power?
Hey mate did you find anything like this? I'm after something similar for my 6p to use in my car
moogaloo said:
I would like to be able to plug a USB cable into my pixel xl on my car and be able to charge the phone and play music.
My idea was to use a USB c hub with pd passthrough power. Plug in a DAC to the hub and a USB c charging cable to a cigarette USB c fast charger.
There are lots available for the Macbooks but will they work with the pixel? Does the pixel allow other devices whilst receiving power?
Click to expand...
Click to collapse
It sounds like you need a kernel capable of 'USB OTG plus Charge'. I have only seen this on Nexus devices. Look in your favorite kernel's forum thread and see if there is support.
Pretty sure this is feasible, though I'm not sure if Android 7 has anything that could pose a restriction.
Sent from my HTC6525LVW using Tapatalk
Hi,
I've been doing some research on using an OTG USB-c cable/hub/y-splitter for data and simultaneous charging capabilities for the 5t. After sifting through forums and Google, the issue is the 5t can't use OTG data transfer and charge itself at the same time; it can only do one or the other (confirmed with my own experiences). I read that the cause might be because of the stock kernel not allowing for this. Would anyone know of a custom kernel for the 5t that allows OTG Host mode and charging simultaneously?
My use case would be to use my 5t to hook up a USB DAC over OTG cable/hub/y-splitter and then use the other USB port to connect to a wall charger to keep my phone charged while using the DAC. It could also be used for other devices that connect over OTG without draining your phone battery for extended use.
- Thanks