{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
Code:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Just to be on the safer side - please restore to stock boot.img or dirty flash your rom before flashing this!
INTRODUCTION
Hey, this is my personal kernel for my Zenfone Max Pro M1. The aim for my kernel is
Performance,Battery life.
Security and stability.
Requirements
BACKUP your Boot.img and ROM Before flash this Kernel.
Unlocked Bootloader as well
Latest TWRP
Features
NOTE: This list will not always been 100% up to date
E.A.S
Up to date with the latest stable Linux version
backlight dimmer option
sound control
vibration strength control
Flashed with anykernel2
Boeffla Wakelock Blocker
Added KCAL support
TCP congestion controller
Added Simple GPU Algorithm
Added fsync on/off support
Adreno idler: (active by default)
Adrenoboost(off by default)
Added finger print boost.
Usb fast charge(enabled by default)
LZ4 zram compression
i/o scheduler (maple,bfq(default),CFQ,anxiety)
Ex- fat support
Added EAS governer
F2fs support(You need supported recovery and rom)
Klaps v4.1
Charging improvement
many more things
Installation
Please Dirty flash yr rom first.
->reboot to twrp flash kernel zip.
Note
Please Dirty flash ur rom first.
if ur temp go above 41 while charging,shut down ur device for 10 min
For f2fs u need supported recovery and rom.
Download
Download Everything From Website Singh_kernel_X00T
Telegram Testing Group LInk
https://t.me/Singh_X00T
Changelogs
See second post.
Support Devlopment(Donate)
Google pay(tez) :https://drive.google.com/file/d/1dbUYG6ebSFKyY25UHqd6sWPAukdf2oIq/view?usp=sharing
PayPal :https://paypal.me/mpschahal
SPECIAL THANKS & CREDITS:
SudeepDuhoon
Shivam Kumar Jha
Mihran Thalhath
@ScreaMySkrillEX
@amog787
@ktommy91
@osm0sis for AnyKernel2
@zx2c4 for WireGuard
@travarilo
lineage team
Frequently asked questions
Q: How do I control the kernel?
A: I personally use SmartPack manager. Feel free to use any you like.
Q: I am having an issue, can you help me?
A: I am not an amazing kernel developer but I will certainly try my best. First, start by reading the release posts, as I may make note of a particular issue. Also search the thread to see if I have discussed it before. If you see nothing, please provide me with a dmesg/last_kmsg and logcat, your ROM/kernel version, and a detailed description of the issue, following this guide. If I can't reproduce reliably, I'm not going to fix the issue.
Q: Can you add xyz feature?
A: If you link me the commits or tell me what kernel you had the feature in, I can take a look at them. I will not add anything that compromises performance.
XDA:DevDB Information
Singh_Kernel, Kernel for the Asus ZenFone Max Pro M1
Contributors
Manpreet Singh (mpschahal16),
Source Code: [url]https://github.com/mpschahal16/Singh_X00Tpr.git[/URL]
Kernel Special Features:Stable,smooth,battery friendly.
Version Information
Status: Stable
Current Stable Version: v3.7
Stable Release Date: 2020-09-06
Created 2018-09-06
Last Updated 2020-09-06
Changelogs
V3.7 Stable
*upstream v4.4.235
*Use common keycodes for fp gestures
*disable audit log spam
*disable some logs.
*wl_blocker:add cdfinger and radio_interface to default list
*default tcp: westwood
*zram: srt default algo to zstd.
V3.6 Stable
*Restart this project
*Upstream v4.4.234.
*Spectrum Support
*Disable some logging/tracers.
*Oc to 2.4Ghz on big 1.8Ghz on small(default little at 1.6 big at 1.8)
*wireguard: Updated to v1.0.20200729
*Improve ram management.
*add input boost and devfreq boost with DSB
*cpufreq:Nuke non EAS cpu governor(powersave,interactive,conservative,ondemand,userspace,relaxed,chill)
*cpufreq:add various eas governors(schedutil,blu_schedutil,darkutil,electroutil,helix_schedutil,pwrutilx,schedalucard)
*Enable zstd zram algo(lz4 is default set)
*Added fsync on/off support
*drivers:make CRC sw toggable
*Charging improvements.
*devfreq: add Simple GPU Algorithm
*oc gpu to 465Mhz
*KSM (off by default)
Congrats on your release!
Hope this keeps going.
Cheers mate
Not bad. Waiting GPU...
Default, v326:
Single-core: 1340 | Multi-core: 4933
Singh v1:
Single-core: 1542 | Multi-core: 5079
Singh v1.2:
Single-core: 1506 | Multi-core: 5417
TalkingFOX said:
Not bad. Waiting GPU...
Default, v326:
Single-core: 1340 | Multi-core: 4933
Singh v1:
Single-core: 1542 | Multi-core: 5079
Singh v1.2:
Single-core: 1506 | Multi-core: 5417
Click to expand...
Click to collapse
+1
savijaysalem said:
+1
Click to expand...
Click to collapse
I reverted the oc, once we are able to handel deep sleep and battery drain will enable it again
So 1.3 does not have that much score but that build is rock stable
How to convert ext4 to f2fs ?
#1Gus said:
How to convert ext4 to f2fs ?
Click to expand...
Click to collapse
YouTube it and only do when you know what u r doing f2fs system is not supported by many flavour of android only data one is supported
mpschahal16 said:
YouTube it and only do when you know what u r doing f2fs system is noy supported by many flavour of android only data one is supported
Click to expand...
Click to collapse
Unable to mount after change to f2fs, maybe i need modified TWRP...
btw, thanks for developing this kernel:good:
#1Gus said:
Unable to mount after change to f2fs, maybe i need modified TWRP...
btw, thanks for developing this kernel:good:
Click to expand...
Click to collapse
Support development if u like the work?
Please add maple io scheduler and make it default.
This kernel work in pie?
Lxoric said:
Please add maple io scheduler and make it default.
Click to expand...
Click to collapse
Check v1.5
Gian Firdaus said:
This kernel work in pie?
Click to expand...
Click to collapse
Yes me using pixy
Add support for DT2W please
YadMM said:
Add support for DT2W please
Click to expand...
Click to collapse
Next stable will have it...
anyone using this rom with stock rom i want a kernel to get more battery so is this ryt choice?
I wanted to know if there is a difference between o/c 636 and 660 ?
I wanted to know if there is a difference between o/c 636 and 660 because benchmarks are the same on both geekbench and antutu
mukulmanghani said:
I wanted to know if there is a difference between o/c 636 and 660 because benchmarks are the same on both geekbench and antutu
Click to expand...
Click to collapse
sdm636 and sdm 660 have same sources and both the chipset are almost same
for sdm 636 also we using same 660 dtsi
mukulmanghani said:
I wanted to know if there is a difference between o/c 636 and 660 because benchmarks are the same on both geekbench and antutu
Click to expand...
Click to collapse
They're both same other then gpu andro 509 in sd636 and andro 513(i think so)
Related
Optimus Kernel
I present to you my own kernel which has been built with many optimizations and tweaks. This kernel will work on lollipop roms only.The main aim is to provide a stable kernel with optimizations.
I hope you all will like it
Enjoy!
Note: This kernel is for Moto G 2014 only(TITAN). Don't flash it on other devices
Custom Features:
- Updated to latest CM12.1 Sources
- Bumped to 3.4.109
- Compiled With Custom Uber 5.2 Toolchain
- Compiled With -O3 & Graphite Flags
- Compiled With Strict-Aliasing & Cortex A7 Tweaks
- ARM v7 Optimizations
- Replaced Qcom's hotplug binary with msm_mpdecision (aka bricked hotplug, better battery life + performance)
- GPU underclock/overclock(Min:100 MHz & Max:533 MHz)
- Add dev/frandom
- DoubleTap2Wake & Sweep2Wake
- Added Support for Kernel Neon Mode
- Enabled Pipe Flag
- IntelliThermal V2 by Faux
- Adreno Idler Algorithm
- State Notifier Driver by Neobuddy89
- Add BioShock/DanceDance Govs
- Added SmartMax/LionHeart Govs
- LCD Kcal Control by Savoca
- Faux's Sound Control
- Optimized ARM RWSEM Algorithm
- Optimized Square Root Algorithm
- CpuFreq and CpuBoost Optimizations
- Disabled Gentle Fair Sleepers
- Enabled Many TCP Congestions
- Added SIO,VR & ZEN IO Scheduler
- Sched & Mutex Tweaks
- Pushed Read Ahead value to 512
- Use your android device as USB Keyboard/Mouse
- Enabled FSync by default
- Optimized Slub
- VFP HardFloat
- Power Efficient WorkQueues
- Reclaimed RAM from loggers
- Kexec patched (Multirom Compatible)
- Many more things (Check Github)
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
You need ROM's default kernel before flashing this. Make sure you have it otherwise clean flash the kernel with the rom to avoid any issues.Pls reboot after tweaking the kernel.
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. (optional) Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy!
DOWNLOADS:
AndroidFileHost
PLS DON'T MIRROR THE LINKS
Recommended app:
Kernel Adiutor or Synapse
Flash UKM.zip from the below link: (credits to @apb_axel)
http://forum.xda-developers.com/android/software/zip-synapse-script-universal-kernel-t2736986
And then install synapse from play store
Credits : (In no specific order,pls pm me if i missed someone)
faux123
Cl3Kener
savoca
Anas Karbila
pinkflozd
YoshiShaPow
DC07
luca020400
And more
XDA:DevDB Information
Optimus Kernel, Kernel for the Moto G 2014
Contributors
Flashhhh
Source Code: https://github.com/desaishivam26/Optimus_Reborn
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: R1
Beta Release Date: 2015-04-24
Created 2015-04-24
Last Updated 2015-09-30
Mine!
One More!!
Good to see this awesome kernel on our Titan!!
Anas Karbila said:
Good to see this awesome kernel on our Titan!!
Click to expand...
Click to collapse
Oh lol Thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It just booted fine. Going to do some fine tuning with kernel Adiutor now!
Sent from my XT1068 using Tapatalk.
Brilliant! Gonna flash it right away!!!
Can this be used on Stock based roms ?
No install hiccups, running smoothly.
BTW, which governor gives a better battery life, not compromising on the performance extensively, but little above balanced?
Thanks
observingi said:
No install hiccups, running smoothly.
BTW, which governor gives a better battery life, not compromising on the performance extensively, but little above balanced?
Thanks
Click to expand...
Click to collapse
Impulse or yankactive
zakee94 said:
Can this be used on Stock based roms ?
Click to expand...
Click to collapse
NO
Will it work on Stock based 5.0.2? More specific TP? Thanks
ptambo91 said:
Will it work on Stock based 5.0.2? More specific TP? Thanks
Click to expand...
Click to collapse
seriously where you too lazy to read 1 post above yours -_-
If this kernel won't work on Stock based ROMs it would be good to mention it in OP... @Flashhhh @Shawn5162
ptambo91 said:
Will it work on Stock based 5.0.2? More specific TP? Thanks
Click to expand...
Click to collapse
No it won't work. It's for CM12 and AOSP roms only
zakee94 said:
If this kernel won't work on Stock based ROMs it would be good to mention it in OP... @Flashhhh @Shawn5162
Click to expand...
Click to collapse
Already updated the OP.
I'm sorry ... ten minutes ago... I'm working and I didn't realize to refresh page. My bad.
observingi said:
No install hiccups, running smoothly.
BTW, which governor gives a better battery life, not compromising on the performance extensively, but little above balanced?
Thanks
Click to expand...
Click to collapse
I recommend smartmax governor for that
smitharro said:
View attachment 3279459
It just booted fine. Going to do some fine tuning with kernel Adiutor now!
Sent from my XT1068 using Tapatalk.
Click to expand...
Click to collapse
All set up now! I really was on the lookout for a kernel like this! Hope it is as stable as it promises to be.
Sent from my XT1068 using Tapatalk.
im testing this right now with reccommended settings, post my benchmark scores later
scores 18608
If you guys have other settings to reach the full potential of the hardware with great battery life please post :angel:
Works Fine and fast....
CPU underclocking is THE BEST
I have a doubt : Under the Hotplug[CPU] Should the MPDecision be Enabled for the kernel addon MSM MPDecision Hotplug to work? ALSO should i Disable faux's Intelliplug?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
An Initial Project for our Little Beast.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
FEATURES :
Compiled with Hyper Toolchain 4.9 @frap129
Based on LA.BF.1.1.3_rb1.13 kernel source
Upstream to Linux 3.4.112
AutoSMP & MSM Hotplug
yankdemand, yankactive, intellidemand, intelliactive, intellimm, smartmax, smartmax_eps, alucard, zzmoove governors
bfq, sio, sioplus, zen, vr, fiops I/O Schedulers
MSM Thermal by @show-p1984
GPU OC to 590 MHz & UC to 100 MHz
Adreno Idler 1.1 by @arter97 & Simple GPU Algorithm by @faux123
Faux Sound 3.6 @faux123
KCAL support by @savoca
USB Force Fast Charge
Adaptive LMK
ZRAM Tweaks (510 mb)
DT2W by @thewisenerd
Dynamic Fsync
Neon Accelerated XOR Implementation
Enabled all TCP Congestion Control
AnyKernel 2 kernel script support
DOWNLOAD LINK :
PhanTom-v7.zip
PhanTom-v7-MM.zip
PhanTom-v7-MIUI.zip
Old Build CM
Old Build MIUI
PHANTOM CHANGELOG :
Changelog can be found here
HOW TO INSTALL :
Boot Into Recovery
Flash Stock Kernel/Boot.img (If coming from other Custom Kernel)
Flash Kernel
Wipe Cache and Dalvik (optional)
Reboot to System.
Use Kernel Adiutor for managing the Kernel
CREDITS AND SPECIAL THANKS TO :
@Tarun93 - for guiding/helping me in kernel building
@fefifofum, @onano & @Luffy.d - for the latest stable kernel source
@neobuddy89 @RolanDroid @hurtsky @franciscofranco @faux123
@savoca @Alucard24 @myfluxi @Cl3Kener
thanx to all for sources
Huge Thanks to my tester for testing kernel :
@Anonymous_1S
@mohdmujahidansari526
@domino2115
XDA:DevDB Information
PhanTom Kernel, Kernel for the Xiaomi Redmi 1S
Contributors
hemantbeast, Tarun93, fefifofum, Luffy.d & thanks to tarun93 for helping me
Source Code: https://github.com/hemantbeast/xiaomi_armani_kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R7
Stable Release Date: 2016-06-14
Created 2015-11-21
Last Updated 2016-07-04
To Enable D2W
Native D2W :
There are three ways by which i enable/disable Native D2W
1. By using Terminal Emulator
2. By using Root Explorer
3. By editing dt2w file in init.d or by Kernel Adiutor
Terminal Emulator :
to enable
echo 1 > /sys/bus/i2c/drivers/ft5x06_i2c/5-0038/d2w_switch
to disable
echo 0 > /sys/bus/i2c/drivers/ft5x06_i2c/5-0038/d2w_switch
Root Explorer
Go to sys/bus/i2c/drivers/ft5x06_i2c/5-0038
Open " d2w_switch" file as text editor
then just changed : 1 to enable and 0 to disable
Beta Version
PhanTom-v8-beta4.zip
PhanTom-v8-MIUI-beta4.zip
Old beta versions are here
After flashing the kernel, let the device first cool down and then start using it normally.
I am on cm11 so going to try
Tried bro working best at that time give you some report after using a long time.?
Not working in CM11. and stuck @1190mhz.
but very good thermal config. and good battery backup
emojhoken said:
Not working in CM11. and stuck @1190mhz.
but very good thermal config. and good battery backup
Click to expand...
Click to collapse
What problem did you face?
Did you wipe cache & dalvik.
Fix the gdrive link. It's set private.
Jayanttyagi said:
Fix the gdrive link. It's set private.
Click to expand...
Click to collapse
New link is uploading wait for the release.
With more tuneup in kernel.
Good work
---------- Post added at 07:06 AM ---------- Previous post was at 06:49 AM ----------
hemantbeast said:
PhanTom Kernel
A Initial Project for our Little Beast.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
PHANTOM CHANGE LOG:
R1
Latest armani-kk sources
Build with UBERTC 4.9.4 20151101
Alucard Hotplug
{Tried other hotplug, but need more fixes till then Alucard is best }
Added alucard, yankactive & bioshock governor
USB Fast Charging
CPU OC to 1.7GHz
GPU OC to 590MHz & UC 100MHz
KCAL support
Faux Sound 3.2
Kexec [Multi Rom Support]
Added more TCP Congestion
IMP Note: I have test the kernel in CM12.1 & CM13.0 ROM, working fine for me & not tested in CM11. So please test by yourself and report if it is working or not. :fingers-crossed:
DOWNLOAD LINK:
PhanTom_Armani_21112015.zip
Mirror
HOW TO INSTALL:
Boot into TWRP Recovery
Flash the Kernel zip file
Wipe Cache
Wipe Dalvik Cache
Reboot to System
Use Kernel Adiutor for managing the Kernel
CREDITS AND SPECIAL THANKS TO :
@Tarun93 - for guiding/helping me in kernel building
@fefifofum & @Luffy.d - for the latest stable kernel source
XDA:DevDB Information
PhanTom Kernel, Kernel for the Xiaomi Redmi 1S
Contributors
hemantbeast, Tarun93, fefifofum, Luffy.d & thanks to tarun93 for helping me
Source Code: https://github.com/hemantbeast/xiaomi_armani_kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R1
Stable Release Date: 2015-11-21
Created 2015-11-21
Last Updated 2015-11-21
Click to expand...
Click to collapse
Please make a support for mi stock rom
any way to fix write issue of sdcard on titanium backup app for backing up data on MarshMallow?
New Kernel link upload with more tuneup.
- Added Bricked Hotplug and Abyssplugv2 governor.
shrikant716 said:
any way to fix write issue of sdcard on titanium backup app for backing up data on MarshMallow?
Click to expand...
Click to collapse
I think it is ROM problem. Since it is in Alpha build.
is there a new build? dev host link not available
agriculture said:
Please make a support for mi stock rom
Click to expand...
Click to collapse
Will work on it soon!!
Fallen_Knight said:
is there a new build? dev host link not available
Click to expand...
Click to collapse
Yes, there's a new build with updated the old one. Dev-host link is working. Check it again.
thanks..using it on kk r30..hope this fix auto close on nba 2k16...
Fallen_Knight said:
thanks..using it on kk r30..hope this fix auto close on nba 2k16...
Click to expand...
Click to collapse
Try it because i didn't try it on cm11. While i am using cm12.1 r29.
If you get any problem report it with logs please.
hemantbeast said:
Try it because i didn't try it on cm11. While i am using cm12.1 r29.
If you get any problem report it with logs please.
Click to expand...
Click to collapse
Can u add double tap to wake and double tap to sleep in this kernel.
khurshid_258 said:
Can u add double tap to wake and double tap to sleep in this kernel.
Click to expand...
Click to collapse
Will add it on next build, if it is stable..
hemantbeast said:
Will add it on next build, if it is stable..
Click to expand...
Click to collapse
please make two seperate version of doubletaptowake option. Because it is the buggiest thing on this earth to strike balance in this world. Well most of the times devs remain busy in striking balance between pocket mode, tap to wake..... Just for sake of simplicity make two versions. It will be best.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
INSTALLATION :
-Boot Into Recovery (TWRP Recommended)-
-Flash Stock Kernel/Boot,
-Reboot Recovery-
-Flash Kernel-
-Reboot!-
SOME IMPORTANT STUFF::
-SaberMod 4.9 Toolchain-
-Based on Armani-Dev Source-
-Upstream to 3.4.112-
-Intelli Hotplug Driver - Based on faux hotplug driver. Enhanced by Neobuddy and @dorimanx-
-Franciscofranco Sound Control-
-Franciscofranco Thermal-
-KCal Driver by @savoca-
-Doubletap2wake (ft5x06) by @thewisenerd-
-Adreno idler-
-Added more CPU Governor (Yankdemand,Yankactive,,Impulse)-
-fsync on/off support-
-Zram Updates-
-Exfat Support-
-DroidDrive support-
-Selinux Permissive-
-TCP Congestion controls ( Westwood, Yeah, Cubic Veno,Vegas , BIC, Reno, HTCP )-
-Frandom-
-USB fast charge-
-WakeLock Toggle-
-LZ4-compressed kernel-
-Enable unaligned memory access-
-Custom Boot script-
-Anykernl2-
-Tons of stuff i don't remember, better check Changelog-
DOWNLOAD::
Neon Kernel
Mirror Link
CHANGELOG'S::
Changelog can be found here
CREDITS:
@fefifofum @Kra1o5 @onano @andiroxu @luffy.d @neobuddy89 @osm0sis @thewisenerd @neonkat @affan94 @sahil_anas @Iceman and all the dev whose commits i use :good:
XDA:DevDB Information
Neon Kernel, Kernel for the Xiaomi Redmi 1S
Contributors
khan_frd2002
Source Code: https://github.com/khanfrd/Neon_Kernel
Kernel Special Features: Fast Stable Smooth
Version Information
Status: Stable
Created 2016-01-15
Last Updated 2018-10-13
Reserved
Test/Beta builds :
Neon_v7_Beta1 [16-06-2016]
Neon_v7_Beta02 [26-06-2016]
Neon_v7_Beta03 [09-07-2016]
Changelog:
Neon-v7-Beta 03 :
Tune Zcache
Remove Fransisco thermal
Stock thermal with sys nodes
Upstream to 3.4.112
Remove JustArchi optimization
Use Os flag instead O2
some other changes
Better check the source as always lazy to write up
https://github.com/khanfrd/Neon_Kernel/commits/zcache
Neon-v7-Beta 02 :
Add and enable ZCACHE CLEANCACHE ZBUD ETC ETC
Add and enable BALANCE_ANON_FILE_RECLAIM
USB fast charge (max limit to 1000mA)
Enable CRYPTO_SHA256_ARM
Misc MM changes
Better check the source lazy to write up
https://github.com/khanfrd/Neon_Kernel/commits/zcache
Neon-v7-Beta 01 :
Enable ksm
Add DroidDrive support
add lz4 Cryptographic API
now using Lz4 compression
Add bm44 support (need conformation on this)
Note : beta builds will be out updated most of the times and stable when everything went cool and don't worry beta builds are mostly stable, so it can be use as daily driver too
Compatible With :
CM11 CM12.x CM13.x and based rom
MIUI in future builds is now supported
Kernel Controller :
Kernel Adiutor
Kernel Adiutor Mod
Help Me Out!
Encounter bug or having trouble and don't know what to do, simply shout here but with a log is appreciate,
if don't know how to, simply follow this guide
Link: http://forum.xda-developers.com/showthread.php?t=1520508
OR OR
Use Kernel Adiutor
Kernel Configuration
Boot Script Mod:
In Neon v6 changelog i write "tune and move boot script to system" and lots of user
might think what thats means, so here what is it
i moved the boot script to system/etc names as "neon.post_boot.sh",
its contains NeonKernel Config, moving the boot script to system help the user to edit and tune the parameter on there own
So how to edit, Here simple example
DoubleTap2Wake:
Open neon.post_boot.sh in any text editor, and find "Native D2W"
there you see : echo "0" > /sys/bus/i2c/drivers/ft5x06_i2c/5-0038/d2w_switch
the value set to 0 (Disable) , just change it to 1 (Enable)
save and exit, now reboot
Simple Thermal:
Open neon.post_boot.sh in any text editor, and find "Simple Thermal"
there you see the values of simple thermal : echo "1344000 39 38" > /sys/kernel/msm_thermal/zone0
just edit them to your liking
its has 8 zone, and the above values mean
1344000 = frequency to throttle to
39 = throttle temperature
38 = unthrottle temperature
and last you guys might thing why we should use this instead we can use Kernel Adiutor,Trickster MOD etc etc, yes you can use it but some mods in the kernel cannot be tune by this apps like Simple Thermal,D2W
so we can use boot script here
And some nice config up by users too :
http://forum.xda-developers.com/showpost.php?p=65528943&postcount=154
http://forum.xda-developers.com/showpost.php?p=66536395&postcount=235
http://forum.xda-developers.com/showpost.php?p=66516550&postcount=221
http://forum.xda-developers.com/showpost.php?p=67358118&postcount=396
Workaround for music bug :
The workaround is simple, you just need two core online when screen is off
So set max core when screen off to 2
even this not work then just set minimum cpu online to 2
This is will work on any custom kernel which have custom hotplug like intelli-plug or msm hotplug etc
Good job!
P.S. Try to list the features of your kernel so that people are aware.
Sent from my HM 1SW using Tapatalk
List the features of this kernel please
khan_frd2002 said:
one more please
Click to expand...
Click to collapse
Which ROMs are compatible with ur kernel brother?
compatible with MIUI 7 and CM12.1, sir?
Works great with cm13 r12.!!
Miui support?
Anubhav Rai said:
Works great with cm13 r12.!!
Click to expand...
Click to collapse
Can u share abput the features...hotplugs..governers etc..thank u
Good work bro, its awesome to have one more new kernel!
Fully compatible with cm12.1 (5.1.1)... please recommended of kernel controller. Thanks.
mohdmujahidansari526 said:
Miui support?
Click to expand...
Click to collapse
I don't like MIUI ... so sorry no MIUI support for now
Eziogamer said:
Can u share abput the features...hotplugs..governers etc..thank u
Click to expand...
Click to collapse
Thread edited...
Iceman said:
Fully compatible with cm12.1 (5.1.1)... please recommended of kernel controller. Thanks.
Click to expand...
Click to collapse
Use Kernel Adiutor
I love MIUI so cant try
Not compatible AOSP rom?
Thanks, nice kernel
Azazel Azay said:
Not compatible AOSP rom?
Click to expand...
Click to collapse
AOSP = CM based....so it will be compatible with AOSP rom too
U dont like MIUI but u made it for Redmi 1s.
I Love miui very much, will never give ur work a try.
bucks_26 said:
U dont like MIUI but u made it for Redmi 1s.
I Love miui very much, will never give ur work a try.
Click to expand...
Click to collapse
i don't give a damn!
anyway read the whole thread before posting anything....Post#2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Code:
If you have anything against me, my projects, this project hurts you,
you don't like this project or you are here just to insult me change thread
because you aren't welcome here.
I won't answer at the useless, spam and flame comments and I will report
them. If you want to troll or ruin a thread this isn't the right one.
Hello Guys, today I'm here with my new and I think the first real Custom Kernel for the Zuk z2/z2 plus.
DarkMoon
Features
Here are the major features of the kernel (feel free to explore Github)
Upstream Linux versions 3.18.31-3.18.58
Upstream patches from CAF (LA.UM.5.5.r1-04900-8x96.0)
Support for overclocking to 2419MHz on big and 1766MHz on little (stock values by default)
Support for the GPU overclocking to 652MHz (stock frequencies as default)
Simple_ondemand set as default GPU governor
CPU governors: interactive, conservative, ondemand, userspace, powersave, performance
Touchboost disabled by default
KCAL color control
Zram
I/O schedulers: bfq, cfq, fiops, maple and noop
Wakelock controls: sensor_ind, Ipa, Netlink, Timerfd, Wlan, Qcom rx, Wlan extscan (all disabled as default)
Vibration Strength percentage control
Fsync
Arch Power
CRC control
Gentle Fair Sleepers control
Power suspend mode: Autosleep, Userspace, LCD Panel, Hybrid (default)
Fingerprint sensor speeded up
TCP algorithms: cubic, highspeed, dctcp, hybia, illinois, lp, reno, scalable, vegas, veno, westwood (default)
F2FS support (latest from here)
Compiled with a Linaro 7.1.1 toolchain built with @The Flash 's script (located here).
Makefile optimizations (check it here)
Graphite
Hides bootloader unlock from SafetyNet (can still fail through other means)
Spectrum Support
Custom Ramdisk
Stock Kernel backup (if you want to restore the stock kernel you just need to flash the zip located here)
Flashed with AnyKernel2 (thanks to @osm0sis)
Downloads:
Current Release (004.1): Download here
Current Release Longtap: Download here
Other Releases:
https://www.androidfilehost.com/?w=files&flid=167771
Don't mirror my builds
Changelogs:
Release 002: Here
Release 003: Here
Release 004:
Kernel completely rebased on the latest caf tag available at the moment (LA.UM.5.5.r1-04300-8x96.0) and then updated to the LA.UM.5.5.r1-04900-8x96.0
Kernel upstreamed to the 3.18.58
Some governors removed (really not even added)
Removed Adreno Idler (we don't need it)
Added some optimizations from the AOSPA op3 kernel
Upstreamed F2FS
Upstreamed SDCARDFS (but the device tree need the support for it)
Overclocked CPU and GPU
Added the spectrum support
Added an abort script for some roms
Check the sources for the rest, I can't remember all
Release 004.1:
Fixed a typo in the ramdisk that bugged the GPU frequency change with the spectrum profiles (thanks to AnjoVingador that reported this problem)
Installation Instructions:
Your bootloader must be unlocked
Download the kernel and flash it in the
twrp and wipe cache and dalvik/art cache if you're doing a dirty flash
If you're doing a clean flash flash ROM, gapps, SuperSU and then the kernel
Current Version Informations:
DarkMoon Kernel Version: Release 004
Linux Kernel Version: 3.18.58
GCC Version: Linaro 7.1.1
Current CAF Tag: LA.UM.5.5.r1-04900-8x96.0
Source Code:
https://github.com/DD3Boh/android_kernel_zuk_msm8996
A thank to:
@FireLord1 [https://GitHub.com/FireLord1]
@KriiX-001 for the Kernel Logo
Fedor917 [ https://GitHub.com/cryscript ]
@davidevinavil [ https://GitHub.Com/Davidevinavil ]
@varotone [ https://GitHub.com/ontherunvaro ]
CallMeSuper [ https://github.com/18712886438 ]
If you like my work donate me, it would be very appreciated:
Donation link:
https://PayPal.me/dd3boh
Zuk z2/z2 plus telegram international group:
https://telegram.me/ZukCustomGoodies
Enjoy
Beautiful bro
Enviado desde mi Z2 Plus mediante Tapatalk
First charge
Enviado desde mi Z2 Plus mediante Tapatalk
Finally a new kernel to play around with. Good work @DD3Boh
Test on D.U march 03/17
So far so good, no bugs from capturing image to capturing video.
For AOSP or stock ROM?
Ritik17 said:
For AOSP or stock ROM?
Click to expand...
Click to collapse
Maybe for all ROM.
I use Citrus CAF ROM, no problem.
When the next version will be released?
Is possible to use the file "zImage" inside DarkMoon-Kernel-z2_plus-Release-002.zip and use
Code:
fastboot flash boot zImage
to flash kernel instead of use TWRP Install method?
Thanks
oh, OC clocks were removed I liked hitting 160k on antutu just for fun haha
SiRiusCb said:
Is possible to use the file "zImage" inside DarkMoon-Kernel-z2_plus-Release-002.zip and use
to flash kernel instead of use TWRP Install method?
Thanks
Click to expand...
Click to collapse
Yes it's possible but I don't suggest that because probably you will have broken wlan. If you want you can try
ar_15 said:
oh, OC clocks were removed I liked hitting 160k on antutu just for fun haha
Click to expand...
Click to collapse
Ahahahah
Anyway I removed them because already weren't working. Maybe I'll add them another time in the future but the problem is to make them working without set them as default. Setting an overclock value as default is something that I don't want to do
Ritik17 said:
For AOSP or stock ROM?
Click to expand...
Click to collapse
Technically for all the custom ROMs nougat, then I heard some people that said it works on the marshmallow ROMs and on the stock ROMs too. I only can grant for the custom ROMs (it seems not the Jaguar... Lol) so I don't know about the zui. If you want to try and then tell us it will be very appreciated.
tlxxxsracer said:
BATTERY:
USB Fast charge (when connected to a USB port)??
When charging isnt it always connected to a usb port...? Any extra heating?
Click to expand...
Click to collapse
I didn't know how to say that. When connected to a USB port of a computer or something like that is the meaning. I haven't hearing issues, others have. I'll try to fix these completely with the next release. I hope you will like the kernel
Does it has any impact in the battery life of the phone ? If so its better or worse ?
DD3Boh said:
Technically for all the custom ROMs nougat, then I heard some people that said it works on the marshmallow ROMs and on the stock ROMs too. I only can grant for the custom ROMs (it seems not the Jaguar... Lol) so I don't know about the zui. If you want to try and then tell us it will be very appreciated.
Click to expand...
Click to collapse
I'm not really a stock rom guy, I always prefer custom rom. I was only confirming whether is it for stock or custom cause I didn't wanted to go through making nandroid backup and etc. I did try the kernel and I liked it, nice work.
Arul Stark said:
Does it has any impact in the battery life of the phone ? If so its better or worse ?
Click to expand...
Click to collapse
No, no impacts at the battery life, just the charging speed changes. It can't damage the battery because with a normally charge it still charge faster
Hey DD3Boh, a bit offtopic since I didn't find the specific thread, but are you still updating Darkness Redefined or now you're only developing this Kernel and Citrus? I saw some people asking about it on zukfans's thread but you seem to be more active here lately.
ar_15 said:
Hey DD3Boh, a bit offtopic since I didn't find the specific thread, but are you still updating Darkness Redefined or now you're only developing this Kernel and Citrus? I saw some people asking about it on zukfans's thread but you seem to be more active here lately.
Click to expand...
Click to collapse
I'm more active there because I won't publish on zukfans anymore. For now there is only the zukfans thread for the DND, with the next update I'll post it here too. I still develop it.
DD3Boh said:
Hello Guys, today I'm here with my new and I think the first real Custom Kernel for the Zuk z2/z2 plus.
DarkMoon
Features:
CPU:
Governors:
zzmoove
blu active
chill
elemental X
impulse
nebula
interactive
conservative
ondemand
userspace
powersave
bioshock
performance
Tuch Boost switch
GPU:
Governors:
spdm bw hyp
cache hwmom
mem latency
bw hwmon
msm vidc vmem+
msm vidc vmem
msm vidc ddr
bw vbif
gpubw mon
msm adreno tz
cpufreq
userspace
powersave
performance
simple ondemand
Adreno Idler:
An efficient workaround for msm adreno tz's overheads by Arter97
THERMAL:
Intellithermal:
An in-kernel replacement for Qualcomm's Thermald by faux123
SCREEN:
Screen's Colors editing
Saturation Intensity
Minimum RGB Value
Grayscale Mode switch
Sreen Hue
Screen Value
Screen Contrast
BATTERY:
USB Fast charge (when connected to a USB port)
MISC:
Vibration Strength
Wakelocks switches:
sendor_ind Wakelock
msm_hsic_host Wakelock
wlan_rx Wakelock
wlan_ctrl Wakelock
wlan Wakelock
BlueSleep Wakelock
INFO:
Linux Kernel version: 3.18.48
DarkMoon Kernel Release: Release 002
GCC: Uber TC 6.x
DOWNLOADS:
Release 001: https://www.androidfilehost.com/?fid=529152257862716201
Release 002:
https://www.androidfilehost.com/?fid=457095661767152450
Changelog Release 002:
https://www.androidfilehost.com/?fid=673368273298945966
SOURCE CODE:
https://github.com/DD3Boh/android_kernel_zuk_msm8996
CONTRIBUTORS:
@miju12 [https://github.com/miju12]
A thank to:
@FireLord1 [https://GitHub.com/FireLord1]
Fedor917 [ https://GitHub.com/cryscript ]
@davidevinavil [ https://GitHub.Com/Davidevinavil ]
@varotone [ https://GitHub.com/ontherunvaro ]
If you like my work donate me, it will be very appreciated:
Donation link: https://PayPal.me/dd3boh
Zuk z2/z2 plus telegram international group: https://telegram.me/ZukCustomGoodies
Enjoy
Click to expand...
Click to collapse
A new update is out. The Release 002. Really it was already out on zukfans but I didn't updated the thread here. Now I'll publish only on XDA so the next update will be always there
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INTRODUCTION
Code:
/*
* Your Warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead dogs, or cats,
* but i'm very interest in thermonuclear war, so if you point the finger
* at me for messing up your device just because this kernel, I will
* send you to the mars with Nuclear Rocket. Act accordingly.
* I know this paragraph is conspiracy-included, so
* dont ask about it. Welcome.
*/
Pepsy is a custom kernel that improves battery consumptions and performances. It's based on LineageOS's kernel to ensure the best stability. It has a lot of improvements made by various legendary XDA developers. I will ever prefer quality over quantity, so do not ask for useless features. And do not forget to drink a PEPSY!
FEATURES
Compatible with android 8.x
Upstream to latest 3.18.y kernel tag from kernel.org
Synced with latest changes from LineageOS
Synced with latest changes from CodeAuroraForum
Sio, Fiops, Fifo, SioPlus, Tripndroid, VR and Zen ioscheds
Impulse governor
Boeffla's Wakelock Blocker
LCD Notifier driver
Backlight Dimmer
Dynamic Sync Control 2.1
KCAL Post Processing Control v2
Adreno Boost
Adreno idler
WireGuard
USB fast charging up to 900 mA
Disabled CRC check
Swappiness 0
Bic, Cubic, Westwood, Hstcp, Hybla, Htcp, Vegas, Reno, Scalable, Lp, Yeah and Illinois advanced TCP
Disabled various logspam of various drivers
Optimized Interactive governor
Arch Power Energy Saving
Gentle Fair Sleepers
Reworked CPU boost
Reworked msm-thermal
Slab updates
Cfq-iosched upstreams
Optimized cpu-idle
OC: CPU | GPU MSM8996 (Standard frequencies for speedbin 1)
... and much more
Please refer to GitHub for a complete features list
DOWNLOAD
Latest Pepsy Kernel
Compatible with:
MI 5
MI 5s
MI 5s Plus
MI Mix
MI Note 2
INSTALLATION
First time install:
Reboot to TWRP recovery
Flash the kernel zip
Flash Magisk (optional)
Wipe cache and dalvik (optional)
Reboot
Updating the kernel:
Reboot to TWRP recovery
Flash the kernel zip
Wipe cache and dalvik (optional)
Reboot
Coming from another kernel:
Dirty flash your ROM or flash the boot.img only
Flash the kernel zip
Flash Magisk (optional)
Wipe cache and dalvik (optional)
Reboot
THANKS TO
Please refer to GitHub
Donate HERE if you want
XDA:DevDB Information
Pepsy Kernel, Kernel for the Xiaomi Mi 5
Contributors
Psy_Man
Source Code: https://github.com/PsyMan47/Pepsy-Kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v0.8
Stable Release Date: 2018-08-04
Created 2018-02-12
Last Updated 2018-08-04
It's good project men thanks
Miui kernel need to be better
Keep going
I will try that...
I deeply appreciate your kernel for mi5, mi5 miui does not have too many kernels , but don't you think 2.45ghz and 681mhz is a little overkill, especially if your after battery , this may ruin the processor due to high voltages especially the most vulnerable is 820 lite variants shipping on 32gb mi5 , and there's also heat to consider
Got bootloop with xiaomi.eu rom
moep1234 said:
Got bootloop with xiaomi.eu rom
Click to expand...
Click to collapse
Working fine here
Hm, i got complete "stock" xiaomi.eu Rom no other mods.. only flashed this new Kernel and wiped the cache... =/
moep1234 said:
Hm, i got complete "stock" xiaomi.eu Rom no other mods.. only flashed this new Kernel and wiped the cache... =/
Click to expand...
Click to collapse
I had naga3 kernel so i did dirty flash to 21.9 of miui eu then flashed this kernel then clear cache then flashed superuser. Goodluck.
wow miui kernel, thanks for that man! :good:really appreciate your works. can you add flar2 wake gesture like on kenzo? i know you also from kenzo esp your firmware updates. btw, your kernel support spectrum?
waiting your kernel for custom rom too
This kernel seems very good, now i'm wondering, someone can limit the freqs and it will use that max freq? i say because that GPU/CPU Overclock is def. overkill
OC to 2.42Ghz？？？im surprised
ready to have a try.thanks:good:
Good news for MIUI user,
Sadly I don't use MIUI any more, great OC, I remember use DX 3.8 OC that has 2.5/2.0 Ghz clock.
i'd flash it....
but the OC doesnt work..
why?
Yu821741512 said:
i'd flash it....
but the OC doesnt work..
why?
Click to expand...
Click to collapse
Same here buuuut amazing battery!!!
Was a thread mistake, becouse i've copy-paste from Mi Note 2 thread. No OC for MI5 and MI5s.
Anyone Confirm working with latest EU weekly ?
Anyone confirm that video record make Black Videos?
pi4a7a said:
Anyone Confirm working with latest EU weekly ?
Click to expand...
Click to collapse
Working great
Lgd screen support?) Better for battery them naga 3 ?) Whith naga i played 4 hours in mobile legends )
rotemkk said:
Same here buuuut amazing battery!!!
Click to expand...
Click to collapse
oh..when i find it OC didnt work i had flashed black to official kernel....so i didnt try that battery
really really amazing?
Great and do I need to do some stuff with a kernel manager to get it working properly or no ?