{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
INSTALLATION :
-Boot Into Recovery (TWRP Recommended)-
-Flash Stock Kernel/Boot,
-Reboot Recovery-
-Flash Kernel-
-Reboot!-
SOME IMPORTANT STUFF::
-SaberMod 4.9 Toolchain-
-Based on Armani-Dev Source-
-Upstream to 3.4.112-
-Intelli Hotplug Driver - Based on faux hotplug driver. Enhanced by Neobuddy and @dorimanx-
-Franciscofranco Sound Control-
-Franciscofranco Thermal-
-KCal Driver by @savoca-
-Doubletap2wake (ft5x06) by @thewisenerd-
-Adreno idler-
-Added more CPU Governor (Yankdemand,Yankactive,,Impulse)-
-fsync on/off support-
-Zram Updates-
-Exfat Support-
-DroidDrive support-
-Selinux Permissive-
-TCP Congestion controls ( Westwood, Yeah, Cubic Veno,Vegas , BIC, Reno, HTCP )-
-Frandom-
-USB fast charge-
-WakeLock Toggle-
-LZ4-compressed kernel-
-Enable unaligned memory access-
-Custom Boot script-
-Anykernl2-
-Tons of stuff i don't remember, better check Changelog-
DOWNLOAD::
Neon Kernel
Mirror Link
CHANGELOG'S::
Changelog can be found here
CREDITS:
@fefifofum @Kra1o5 @onano @andiroxu @luffy.d @neobuddy89 @osm0sis @thewisenerd @neonkat @affan94 @sahil_anas @Iceman and all the dev whose commits i use :good:
XDA:DevDB Information
Neon Kernel, Kernel for the Xiaomi Redmi 1S
Contributors
khan_frd2002
Source Code: https://github.com/khanfrd/Neon_Kernel
Kernel Special Features: Fast Stable Smooth
Version Information
Status: Stable
Created 2016-01-15
Last Updated 2018-10-13
Reserved
Test/Beta builds :
Neon_v7_Beta1 [16-06-2016]
Neon_v7_Beta02 [26-06-2016]
Neon_v7_Beta03 [09-07-2016]
Changelog:
Neon-v7-Beta 03 :
Tune Zcache
Remove Fransisco thermal
Stock thermal with sys nodes
Upstream to 3.4.112
Remove JustArchi optimization
Use Os flag instead O2
some other changes
Better check the source as always lazy to write up
https://github.com/khanfrd/Neon_Kernel/commits/zcache
Neon-v7-Beta 02 :
Add and enable ZCACHE CLEANCACHE ZBUD ETC ETC
Add and enable BALANCE_ANON_FILE_RECLAIM
USB fast charge (max limit to 1000mA)
Enable CRYPTO_SHA256_ARM
Misc MM changes
Better check the source lazy to write up
https://github.com/khanfrd/Neon_Kernel/commits/zcache
Neon-v7-Beta 01 :
Enable ksm
Add DroidDrive support
add lz4 Cryptographic API
now using Lz4 compression
Add bm44 support (need conformation on this)
Note : beta builds will be out updated most of the times and stable when everything went cool and don't worry beta builds are mostly stable, so it can be use as daily driver too
Compatible With :
CM11 CM12.x CM13.x and based rom
MIUI in future builds is now supported
Kernel Controller :
Kernel Adiutor
Kernel Adiutor Mod
Help Me Out!
Encounter bug or having trouble and don't know what to do, simply shout here but with a log is appreciate,
if don't know how to, simply follow this guide
Link: http://forum.xda-developers.com/showthread.php?t=1520508
OR OR
Use Kernel Adiutor
Kernel Configuration
Boot Script Mod:
In Neon v6 changelog i write "tune and move boot script to system" and lots of user
might think what thats means, so here what is it
i moved the boot script to system/etc names as "neon.post_boot.sh",
its contains NeonKernel Config, moving the boot script to system help the user to edit and tune the parameter on there own
So how to edit, Here simple example
DoubleTap2Wake:
Open neon.post_boot.sh in any text editor, and find "Native D2W"
there you see : echo "0" > /sys/bus/i2c/drivers/ft5x06_i2c/5-0038/d2w_switch
the value set to 0 (Disable) , just change it to 1 (Enable)
save and exit, now reboot
Simple Thermal:
Open neon.post_boot.sh in any text editor, and find "Simple Thermal"
there you see the values of simple thermal : echo "1344000 39 38" > /sys/kernel/msm_thermal/zone0
just edit them to your liking
its has 8 zone, and the above values mean
1344000 = frequency to throttle to
39 = throttle temperature
38 = unthrottle temperature
and last you guys might thing why we should use this instead we can use Kernel Adiutor,Trickster MOD etc etc, yes you can use it but some mods in the kernel cannot be tune by this apps like Simple Thermal,D2W
so we can use boot script here
And some nice config up by users too :
http://forum.xda-developers.com/showpost.php?p=65528943&postcount=154
http://forum.xda-developers.com/showpost.php?p=66536395&postcount=235
http://forum.xda-developers.com/showpost.php?p=66516550&postcount=221
http://forum.xda-developers.com/showpost.php?p=67358118&postcount=396
Workaround for music bug :
The workaround is simple, you just need two core online when screen is off
So set max core when screen off to 2
even this not work then just set minimum cpu online to 2
This is will work on any custom kernel which have custom hotplug like intelli-plug or msm hotplug etc
Good job!
P.S. Try to list the features of your kernel so that people are aware.
Sent from my HM 1SW using Tapatalk
List the features of this kernel please
khan_frd2002 said:
one more please
Click to expand...
Click to collapse
Which ROMs are compatible with ur kernel brother?
compatible with MIUI 7 and CM12.1, sir?
Works great with cm13 r12.!!
Miui support?
Anubhav Rai said:
Works great with cm13 r12.!!
Click to expand...
Click to collapse
Can u share abput the features...hotplugs..governers etc..thank u
Good work bro, its awesome to have one more new kernel!
Fully compatible with cm12.1 (5.1.1)... please recommended of kernel controller. Thanks.
mohdmujahidansari526 said:
Miui support?
Click to expand...
Click to collapse
I don't like MIUI ... so sorry no MIUI support for now
Eziogamer said:
Can u share abput the features...hotplugs..governers etc..thank u
Click to expand...
Click to collapse
Thread edited...
Iceman said:
Fully compatible with cm12.1 (5.1.1)... please recommended of kernel controller. Thanks.
Click to expand...
Click to collapse
Use Kernel Adiutor
I love MIUI so cant try
Not compatible AOSP rom?
Thanks, nice kernel
Azazel Azay said:
Not compatible AOSP rom?
Click to expand...
Click to collapse
AOSP = CM based....so it will be compatible with AOSP rom too
U dont like MIUI but u made it for Redmi 1s.
I Love miui very much, will never give ur work a try.
bucks_26 said:
U dont like MIUI but u made it for Redmi 1s.
I Love miui very much, will never give ur work a try.
Click to expand...
Click to collapse
i don't give a damn!
anyway read the whole thread before posting anything....Post#2
Related
Optimus Kernel
I present to you my own kernel which has been built with many optimizations and tweaks. This kernel will work on lollipop roms only.The main aim is to provide a stable kernel with optimizations.
I hope you all will like it
Enjoy!
Note: This kernel is for Moto G 2014 only(TITAN). Don't flash it on other devices
Custom Features:
- Updated to latest CM12.1 Sources
- Bumped to 3.4.109
- Compiled With Custom Uber 5.2 Toolchain
- Compiled With -O3 & Graphite Flags
- Compiled With Strict-Aliasing & Cortex A7 Tweaks
- ARM v7 Optimizations
- Replaced Qcom's hotplug binary with msm_mpdecision (aka bricked hotplug, better battery life + performance)
- GPU underclock/overclock(Min:100 MHz & Max:533 MHz)
- Add dev/frandom
- DoubleTap2Wake & Sweep2Wake
- Added Support for Kernel Neon Mode
- Enabled Pipe Flag
- IntelliThermal V2 by Faux
- Adreno Idler Algorithm
- State Notifier Driver by Neobuddy89
- Add BioShock/DanceDance Govs
- Added SmartMax/LionHeart Govs
- LCD Kcal Control by Savoca
- Faux's Sound Control
- Optimized ARM RWSEM Algorithm
- Optimized Square Root Algorithm
- CpuFreq and CpuBoost Optimizations
- Disabled Gentle Fair Sleepers
- Enabled Many TCP Congestions
- Added SIO,VR & ZEN IO Scheduler
- Sched & Mutex Tweaks
- Pushed Read Ahead value to 512
- Use your android device as USB Keyboard/Mouse
- Enabled FSync by default
- Optimized Slub
- VFP HardFloat
- Power Efficient WorkQueues
- Reclaimed RAM from loggers
- Kexec patched (Multirom Compatible)
- Many more things (Check Github)
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
You need ROM's default kernel before flashing this. Make sure you have it otherwise clean flash the kernel with the rom to avoid any issues.Pls reboot after tweaking the kernel.
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. (optional) Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy!
DOWNLOADS:
AndroidFileHost
PLS DON'T MIRROR THE LINKS
Recommended app:
Kernel Adiutor or Synapse
Flash UKM.zip from the below link: (credits to @apb_axel)
http://forum.xda-developers.com/android/software/zip-synapse-script-universal-kernel-t2736986
And then install synapse from play store
Credits : (In no specific order,pls pm me if i missed someone)
faux123
Cl3Kener
savoca
Anas Karbila
pinkflozd
YoshiShaPow
DC07
luca020400
And more
XDA:DevDB Information
Optimus Kernel, Kernel for the Moto G 2014
Contributors
Flashhhh
Source Code: https://github.com/desaishivam26/Optimus_Reborn
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: R1
Beta Release Date: 2015-04-24
Created 2015-04-24
Last Updated 2015-09-30
Mine!
One More!!
Good to see this awesome kernel on our Titan!!
Anas Karbila said:
Good to see this awesome kernel on our Titan!!
Click to expand...
Click to collapse
Oh lol Thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It just booted fine. Going to do some fine tuning with kernel Adiutor now!
Sent from my XT1068 using Tapatalk.
Brilliant! Gonna flash it right away!!!
Can this be used on Stock based roms ?
No install hiccups, running smoothly.
BTW, which governor gives a better battery life, not compromising on the performance extensively, but little above balanced?
Thanks
observingi said:
No install hiccups, running smoothly.
BTW, which governor gives a better battery life, not compromising on the performance extensively, but little above balanced?
Thanks
Click to expand...
Click to collapse
Impulse or yankactive
zakee94 said:
Can this be used on Stock based roms ?
Click to expand...
Click to collapse
NO
Will it work on Stock based 5.0.2? More specific TP? Thanks
ptambo91 said:
Will it work on Stock based 5.0.2? More specific TP? Thanks
Click to expand...
Click to collapse
seriously where you too lazy to read 1 post above yours -_-
If this kernel won't work on Stock based ROMs it would be good to mention it in OP... @Flashhhh @Shawn5162
ptambo91 said:
Will it work on Stock based 5.0.2? More specific TP? Thanks
Click to expand...
Click to collapse
No it won't work. It's for CM12 and AOSP roms only
zakee94 said:
If this kernel won't work on Stock based ROMs it would be good to mention it in OP... @Flashhhh @Shawn5162
Click to expand...
Click to collapse
Already updated the OP.
I'm sorry ... ten minutes ago... I'm working and I didn't realize to refresh page. My bad.
observingi said:
No install hiccups, running smoothly.
BTW, which governor gives a better battery life, not compromising on the performance extensively, but little above balanced?
Thanks
Click to expand...
Click to collapse
I recommend smartmax governor for that
smitharro said:
View attachment 3279459
It just booted fine. Going to do some fine tuning with kernel Adiutor now!
Sent from my XT1068 using Tapatalk.
Click to expand...
Click to collapse
All set up now! I really was on the lookout for a kernel like this! Hope it is as stable as it promises to be.
Sent from my XT1068 using Tapatalk.
im testing this right now with reccommended settings, post my benchmark scores later
scores 18608
If you guys have other settings to reach the full potential of the hardware with great battery life please post :angel:
Works Fine and fast....
CPU underclocking is THE BEST
I have a doubt : Under the Hotplug[CPU] Should the MPDecision be Enabled for the kernel addon MSM MPDecision Hotplug to work? ALSO should i Disable faux's Intelliplug?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Code:
- Stable Kernel
- AIO Kernel Optimizations
- Built with Linaro 5.1 with Graphite
- Linux 3.4.107 Kernel
- Based off of OxygenOS Kernel
- Optimized GPU
- Conservative GPU Governor (default)
- Optimized Cache Flags
- TripNDroid I/O Scheduler (default)
- Added NEON Optimizations from CodeAuroraForums
- SmartMax CPU Governor
- Quick Wake Up Driver (battery saving feature)
- Cortex-A15 Optimizations
- Optimized Square Root Algorithm
- TCP Congestion Algorithms Enabled
- Disabled some debugging for better performance
- Dynamic Management of Timer Slack
- Optimized RWSEM Algorithm and Patches
- Sched Patches
- *No custom hotplug has been added for now*
Code:
[URL="https://basketbuild.com/devs/YoshiShaPow/Kernels/Bacon/OxygenOS"]Basketbuild[/URL]
[URL="https://github.com/TGM-Hybrid/tgm-bacon-oos"]Source[/URL]
Code:
1. Download the kernel and place it into your storage directory
2. Reboot into recovery (Power off phone, then hold the Power + Volume Down button)
3. Install the kernel
4. Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and profit
XDA:DevDB Information
TGM-Hybrid Kernel for OxygenOS, ROM for the ONEPLUS ONE
Contributors
Qrze, frap129, Lord Boeffla, flar2, arter97, Christopher83, myfluxi, ak
Source Code: https://github.com/TGM-Hybrid/tgm-bacon-oos
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: ~ n/a ~
Based On: OxygenOS
Version Information
Status: Stable
Current Stable Version: r1
Stable Release Date: 2015-05-28
Created 2015-05-29
Last Updated 2015-05-29
Sick!
Since this is basically pure CAF, will it work with @Sultanxda's build of cyanogen or omnirom?
_ASSASSIN_ said:
Sick!
Since this is basically pure CAF, will it work with @Sultanxda's build of cyanogen or omnirom?
Click to expand...
Click to collapse
No, it's not anykernel.
Does this kernel include the new touch screen driver?
_ASSASSIN_ said:
Sick!
Since this is basically pure CAF, will it work with @Sultanxda's build of cyanogen or omnirom?
Click to expand...
Click to collapse
This kernel is for OxgyenOS :good:
Does this have the color code to adjust RGB?
flyinj54 said:
Does this have the color code to adjust RGB?
Click to expand...
Click to collapse
No not yet, but I am looking into implementing it soon.
Link
Your link to the download keeps coming back in error unable to download.
dispatcher2412 said:
Your link to the download keeps coming back in error unable to download.
Click to expand...
Click to collapse
It just worked for me..!?
Added to OnePlus One index thread:
[INDEX] OnePlus One Resources Compilation Roll-Up
Woo! Excites for development, especially custom hot plug lol
What's your opinion about oxygen stock hot plug? Is it power hungry?
Seemed like it to me, and 2 core min
What app can i use to customize the kernel?
Is trickter mod fine?
Synapse shows no UCI support detected.
Flash ukm for synapse.
Sent from my bacon!!!!!
Ofthecats said:
Woo! Excites for development, especially custom hot plug lol
What's your opinion about oxygen stock hot plug? Is it power hungry?
Seemed like it to me, and 2 core min
Click to expand...
Click to collapse
qualcomm's hotplug is very aggressive with putting cores online.
misal6666 said:
What app can i use to customize the kernel?
Is trickter mod fine?
Synapse shows no UCI support detected.
Click to expand...
Click to collapse
Use Kernel Adiutor.
misal6666 said:
What app can i use to customize the kernel?
Is trickter mod fine?
Synapse shows no UCI support detected.
Click to expand...
Click to collapse
NickosD said:
Flash ukm for synapse.
Sent from my bacon!!!!!
Click to expand...
Click to collapse
All my kernels are officially supported by Kernel Adiutor
Is the touchscreen fix included in the kernel?
can not download using the phone, i can see the file, but i can not click on it, it is not a hyperlink in basketbuild. just normal text
ghmail2 said:
can not download using the phone, i can see the file, but i can not click on it, it is not a hyperlink in basketbuild. just normal text
Click to expand...
Click to collapse
Downloading using Peer5 isn't working very well on mobile devices.
Here's a mirror: https://www.androidfilehost.com/?fid=23991606952613147
@Qrze
Let me know if you want me to remove the mirror.
You only have to turn your phone in landscape otherwise you can't see the link. It's outside the screen on portrait.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Llama Sweet For AOSP
Code:
/* *** Disclaimer
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* BOOM goes the Dynamite
*/
I just started Developement (since early 2015) i have a lot to learn but i want to share that i already learn. The main goal of this kernel is performance and battery life as well as user friendliness.
Rules
1. if you have any issue do some research before posting
2. I want Respect, No troll and limited off-topic
Let's talk about that big baby
FEATURES
-Built with ubertc 6.0 linaro toolchain
- Based on Boeffla Works
- Powersuspend
- Modified MPdecision and Intelliplug from faux
- Intellithermal
- Intelliactive and IntelliMM from Faux
- FIOPS, ROW, BFQ-v7, SIO, DEADLINE, NOOP, CFQ Schedulers
- More governor
- Sound Control
- Frandom
- USB Fast Charge (ON/OFF Toggle)
- New LZ4 Compressor
- Dynamic FSync
- Kcal driver
- Simple GPU Algorithm
- Kexec Hardboot
- Working dt2w
- What you ask !
For kernel tuning i recommand you to flash UKM and use Synapse on google play store
INSTRUCTION
* Boot into Recovery
* (Recommended) Make a complete backup of entire rom
* Flash Zip corresponding to your variant
* Reboot
Download
LP Download
Thanks
I would like to thanks every developer that help me RenderBroken, REV3NT3CH, Lord Boeffla , Dorimanx, Neobuddy89, Savoca, Faux123, and Many More!
And of course every user that enjoy this kernel and every donators
XDA:DevDB Information
[KERNEL][5.1][CAF] Llama Sweet kernel , ROM for the LG G2
Contributors
genesixxbf3
Source Code: https://github.com/LlamaOpenSourceProject/msm8974_caf_G2
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CAF
Version Information
Status: Stable
Current Stable Version: v1.0
Created 2015-05-31
Last Updated 2015-06-13
Reserved
Personal setting (soon as i know how to do i'll make them as default) :
CPU MAX FREQ 1497 MHz
CPU MULTICORE POWER SAVING aggressive
CPU GOV Nightmare
ENABLE Intellithermal (IMPORTANT)
CPU VOLT -20
IO Read-Ahead size 2048 KB and Scheduler ZEN
GPU GOV simple_ondemand
Sound +3 for Headset boost and +2 for Speaker boost
POWER SUSPEND kernel mode
FAST CHARGE enable
WIFI SCAN interval 150 sec
Reserved
Credit for the logo to @electrikjesus
Habemus Llama Kernel!
Any reason behind using the max at 1497 ?
dharani1234 said:
Any reason behind using the max at 1497 ?
Click to expand...
Click to collapse
for more battery life
genesixxbf3 said:
for more battery life
Click to expand...
Click to collapse
K .. that's what I thought .. but I feel that browsing slows down when you set it to that low. I use 1958 MHz
Thanks for the quick response .
802= stuck on LG Logo
Gesendet von meinem LG-D802 mit Tapatalk
It is a great work .And I want to know that it can use for blisspop , remix and CM12.1?All my best .
energizer5680 said:
802= stuck on LG Logo
Gesendet von meinem LG-D802 mit Tapatalk
Click to expand...
Click to collapse
Are you sure you are on a CAF 5.1 ROM? It works here fine on my D802
liusi522 said:
It is a great work .And I want to know that it can use for blisspop , remix and CM12.1?All my best .
Click to expand...
Click to collapse
If they are based on CAF and android 5.1.X then it should work fine. If you are using a non CAF ROM then you will encounter that it will not boot or inverted display etc.
wulsic said:
Are you sure you are on a CAF 5.1 ROM? It works here fine on my D802
If they are based on CAF and android 5.1.X then it should work fine. If you are using a non CAF ROM then you will encounter that it will not boot or inverted display etc.
Click to expand...
Click to collapse
Understand, thank you for your answer and your kernel.
liusi522 said:
It is a great work .And I want to know that it can use for blisspop , remix and CM12.1?All my best .
Click to expand...
Click to collapse
make sure they are CAF (ok for bliss and remix )
energizer5680 said:
802= stuck on LG Logo
Gesendet von meinem LG-D802 mit Tapatalk
Click to expand...
Click to collapse
Great logs and information.
Thank you for your work, just asking if it works with thishttp://forum.xda-developers.com/lg-g2/development/cm12-1-caf-5-1-1-variants-dt2w-t3122206rom?
Yes it should work with http://forum.xda-developers.com/lg-g2/development/cm12-1-caf-5-1-1-variants-dt2w-t3122206rom?
wulsic said:
Are you sure you are on a CAF 5.1 ROM? It works here fine on my D802
If they are based on CAF and android 5.1.X then it should work fine. If you are using a non CAF ROM then you will encounter that it will not boot or inverted display etc.
Click to expand...
Click to collapse
Thanks for your answer. What do you mean with CAF? I'm on Blisspop v3.3; 5.1.1
D803 will not be until there is source code Lollipop for him?
So blisspop 3.4 Compatible ? Is it the same kernel as in blisspop 3.4 ?
Can I use kernel auditore or should I remove it and use synapse?
---------- Post added at 05:53 PM ---------- Previous post was at 05:47 PM ----------
energizer5680 said:
Thanks for your answer. What do you mean with CAF? I'm on Blisspop v3.3; 5.1.1
Click to expand...
Click to collapse
Caf means that the kernel is on lollipop source, lollipop modem bootstack and so.
As far as I know blisspop 3.3 is not caf cause it's on jb boot stack
vitök said:
So blisspop 3.4 Compatible ? Is it the same kernel as in blisspop 3.4 ?
Can I use kernel auditore or should I remove it and use synapse?
Click to expand...
Click to collapse
yes it's compatible
you can use both
Great kernel, only a single bug in synapse using the posted UKM:
Under Misc, the default power suspend mode is set to User Mode. Below it is a bar named "Power Suspend State". Changing its value to anything but 0 causes com.af.synapse.utils.RunCommandFailedException: echo: write error: Invalid argument
Using RR5.1.1 CAF on a d802.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
An Initial Project for our Little Beast.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
FEATURES :
Compiled with Hyper Toolchain 4.9 @frap129
Based on LA.BF.1.1.3_rb1.13 kernel source
Upstream to Linux 3.4.112
AutoSMP & MSM Hotplug
yankdemand, yankactive, intellidemand, intelliactive, intellimm, smartmax, smartmax_eps, alucard, zzmoove governors
bfq, sio, sioplus, zen, vr, fiops I/O Schedulers
MSM Thermal by @show-p1984
GPU OC to 590 MHz & UC to 100 MHz
Adreno Idler 1.1 by @arter97 & Simple GPU Algorithm by @faux123
Faux Sound 3.6 @faux123
KCAL support by @savoca
USB Force Fast Charge
Adaptive LMK
ZRAM Tweaks (510 mb)
DT2W by @thewisenerd
Dynamic Fsync
Neon Accelerated XOR Implementation
Enabled all TCP Congestion Control
AnyKernel 2 kernel script support
DOWNLOAD LINK :
PhanTom-v7.zip
PhanTom-v7-MM.zip
PhanTom-v7-MIUI.zip
Old Build CM
Old Build MIUI
PHANTOM CHANGELOG :
Changelog can be found here
HOW TO INSTALL :
Boot Into Recovery
Flash Stock Kernel/Boot.img (If coming from other Custom Kernel)
Flash Kernel
Wipe Cache and Dalvik (optional)
Reboot to System.
Use Kernel Adiutor for managing the Kernel
CREDITS AND SPECIAL THANKS TO :
@Tarun93 - for guiding/helping me in kernel building
@fefifofum, @onano & @Luffy.d - for the latest stable kernel source
@neobuddy89 @RolanDroid @hurtsky @franciscofranco @faux123
@savoca @Alucard24 @myfluxi @Cl3Kener
thanx to all for sources
Huge Thanks to my tester for testing kernel :
@Anonymous_1S
@mohdmujahidansari526
@domino2115
XDA:DevDB Information
PhanTom Kernel, Kernel for the Xiaomi Redmi 1S
Contributors
hemantbeast, Tarun93, fefifofum, Luffy.d & thanks to tarun93 for helping me
Source Code: https://github.com/hemantbeast/xiaomi_armani_kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R7
Stable Release Date: 2016-06-14
Created 2015-11-21
Last Updated 2016-07-04
To Enable D2W
Native D2W :
There are three ways by which i enable/disable Native D2W
1. By using Terminal Emulator
2. By using Root Explorer
3. By editing dt2w file in init.d or by Kernel Adiutor
Terminal Emulator :
to enable
echo 1 > /sys/bus/i2c/drivers/ft5x06_i2c/5-0038/d2w_switch
to disable
echo 0 > /sys/bus/i2c/drivers/ft5x06_i2c/5-0038/d2w_switch
Root Explorer
Go to sys/bus/i2c/drivers/ft5x06_i2c/5-0038
Open " d2w_switch" file as text editor
then just changed : 1 to enable and 0 to disable
Beta Version
PhanTom-v8-beta4.zip
PhanTom-v8-MIUI-beta4.zip
Old beta versions are here
After flashing the kernel, let the device first cool down and then start using it normally.
I am on cm11 so going to try
Tried bro working best at that time give you some report after using a long time.?
Not working in CM11. and stuck @1190mhz.
but very good thermal config. and good battery backup
emojhoken said:
Not working in CM11. and stuck @1190mhz.
but very good thermal config. and good battery backup
Click to expand...
Click to collapse
What problem did you face?
Did you wipe cache & dalvik.
Fix the gdrive link. It's set private.
Jayanttyagi said:
Fix the gdrive link. It's set private.
Click to expand...
Click to collapse
New link is uploading wait for the release.
With more tuneup in kernel.
Good work
---------- Post added at 07:06 AM ---------- Previous post was at 06:49 AM ----------
hemantbeast said:
PhanTom Kernel
A Initial Project for our Little Beast.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
PHANTOM CHANGE LOG:
R1
Latest armani-kk sources
Build with UBERTC 4.9.4 20151101
Alucard Hotplug
{Tried other hotplug, but need more fixes till then Alucard is best }
Added alucard, yankactive & bioshock governor
USB Fast Charging
CPU OC to 1.7GHz
GPU OC to 590MHz & UC 100MHz
KCAL support
Faux Sound 3.2
Kexec [Multi Rom Support]
Added more TCP Congestion
IMP Note: I have test the kernel in CM12.1 & CM13.0 ROM, working fine for me & not tested in CM11. So please test by yourself and report if it is working or not. :fingers-crossed:
DOWNLOAD LINK:
PhanTom_Armani_21112015.zip
Mirror
HOW TO INSTALL:
Boot into TWRP Recovery
Flash the Kernel zip file
Wipe Cache
Wipe Dalvik Cache
Reboot to System
Use Kernel Adiutor for managing the Kernel
CREDITS AND SPECIAL THANKS TO :
@Tarun93 - for guiding/helping me in kernel building
@fefifofum & @Luffy.d - for the latest stable kernel source
XDA:DevDB Information
PhanTom Kernel, Kernel for the Xiaomi Redmi 1S
Contributors
hemantbeast, Tarun93, fefifofum, Luffy.d & thanks to tarun93 for helping me
Source Code: https://github.com/hemantbeast/xiaomi_armani_kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R1
Stable Release Date: 2015-11-21
Created 2015-11-21
Last Updated 2015-11-21
Click to expand...
Click to collapse
Please make a support for mi stock rom
any way to fix write issue of sdcard on titanium backup app for backing up data on MarshMallow?
New Kernel link upload with more tuneup.
- Added Bricked Hotplug and Abyssplugv2 governor.
shrikant716 said:
any way to fix write issue of sdcard on titanium backup app for backing up data on MarshMallow?
Click to expand...
Click to collapse
I think it is ROM problem. Since it is in Alpha build.
is there a new build? dev host link not available
agriculture said:
Please make a support for mi stock rom
Click to expand...
Click to collapse
Will work on it soon!!
Fallen_Knight said:
is there a new build? dev host link not available
Click to expand...
Click to collapse
Yes, there's a new build with updated the old one. Dev-host link is working. Check it again.
thanks..using it on kk r30..hope this fix auto close on nba 2k16...
Fallen_Knight said:
thanks..using it on kk r30..hope this fix auto close on nba 2k16...
Click to expand...
Click to collapse
Try it because i didn't try it on cm11. While i am using cm12.1 r29.
If you get any problem report it with logs please.
hemantbeast said:
Try it because i didn't try it on cm11. While i am using cm12.1 r29.
If you get any problem report it with logs please.
Click to expand...
Click to collapse
Can u add double tap to wake and double tap to sleep in this kernel.
khurshid_258 said:
Can u add double tap to wake and double tap to sleep in this kernel.
Click to expand...
Click to collapse
Will add it on next build, if it is stable..
hemantbeast said:
Will add it on next build, if it is stable..
Click to expand...
Click to collapse
please make two seperate version of doubletaptowake option. Because it is the buggiest thing on this earth to strike balance in this world. Well most of the times devs remain busy in striking balance between pocket mode, tap to wake..... Just for sake of simplicity make two versions. It will be best.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
Code:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Just to be on the safer side - please restore to stock boot.img or dirty flash your rom before flashing this!
INTRODUCTION
Hey, this is my personal kernel for my Zenfone Max Pro M1. The aim for my kernel is
Performance,Battery life.
Security and stability.
Requirements
BACKUP your Boot.img and ROM Before flash this Kernel.
Unlocked Bootloader as well
Latest TWRP
Features
NOTE: This list will not always been 100% up to date
E.A.S
Up to date with the latest stable Linux version
backlight dimmer option
sound control
vibration strength control
Flashed with anykernel2
Boeffla Wakelock Blocker
Added KCAL support
TCP congestion controller
Added Simple GPU Algorithm
Added fsync on/off support
Adreno idler: (active by default)
Adrenoboost(off by default)
Added finger print boost.
Usb fast charge(enabled by default)
LZ4 zram compression
i/o scheduler (maple,bfq(default),CFQ,anxiety)
Ex- fat support
Added EAS governer
F2fs support(You need supported recovery and rom)
Klaps v4.1
Charging improvement
many more things
Installation
Please Dirty flash yr rom first.
->reboot to twrp flash kernel zip.
Note
Please Dirty flash ur rom first.
if ur temp go above 41 while charging,shut down ur device for 10 min
For f2fs u need supported recovery and rom.
Download
Download Everything From Website Singh_kernel_X00T
Telegram Testing Group LInk
https://t.me/Singh_X00T
Changelogs
See second post.
Support Devlopment(Donate)
Google pay(tez) :https://drive.google.com/file/d/1dbUYG6ebSFKyY25UHqd6sWPAukdf2oIq/view?usp=sharing
PayPal :https://paypal.me/mpschahal
SPECIAL THANKS & CREDITS:
SudeepDuhoon
Shivam Kumar Jha
Mihran Thalhath
@ScreaMySkrillEX
@amog787
@ktommy91
@osm0sis for AnyKernel2
@zx2c4 for WireGuard
@travarilo
lineage team
Frequently asked questions
Q: How do I control the kernel?
A: I personally use SmartPack manager. Feel free to use any you like.
Q: I am having an issue, can you help me?
A: I am not an amazing kernel developer but I will certainly try my best. First, start by reading the release posts, as I may make note of a particular issue. Also search the thread to see if I have discussed it before. If you see nothing, please provide me with a dmesg/last_kmsg and logcat, your ROM/kernel version, and a detailed description of the issue, following this guide. If I can't reproduce reliably, I'm not going to fix the issue.
Q: Can you add xyz feature?
A: If you link me the commits or tell me what kernel you had the feature in, I can take a look at them. I will not add anything that compromises performance.
XDA:DevDB Information
Singh_Kernel, Kernel for the Asus ZenFone Max Pro M1
Contributors
Manpreet Singh (mpschahal16),
Source Code: [url]https://github.com/mpschahal16/Singh_X00Tpr.git[/URL]
Kernel Special Features:Stable,smooth,battery friendly.
Version Information
Status: Stable
Current Stable Version: v3.7
Stable Release Date: 2020-09-06
Created 2018-09-06
Last Updated 2020-09-06
Changelogs
V3.7 Stable
*upstream v4.4.235
*Use common keycodes for fp gestures
*disable audit log spam
*disable some logs.
*wl_blocker:add cdfinger and radio_interface to default list
*default tcp: westwood
*zram: srt default algo to zstd.
V3.6 Stable
*Restart this project
*Upstream v4.4.234.
*Spectrum Support
*Disable some logging/tracers.
*Oc to 2.4Ghz on big 1.8Ghz on small(default little at 1.6 big at 1.8)
*wireguard: Updated to v1.0.20200729
*Improve ram management.
*add input boost and devfreq boost with DSB
*cpufreq:Nuke non EAS cpu governor(powersave,interactive,conservative,ondemand,userspace,relaxed,chill)
*cpufreq:add various eas governors(schedutil,blu_schedutil,darkutil,electroutil,helix_schedutil,pwrutilx,schedalucard)
*Enable zstd zram algo(lz4 is default set)
*Added fsync on/off support
*drivers:make CRC sw toggable
*Charging improvements.
*devfreq: add Simple GPU Algorithm
*oc gpu to 465Mhz
*KSM (off by default)
Congrats on your release!
Hope this keeps going.
Cheers mate
Not bad. Waiting GPU...
Default, v326:
Single-core: 1340 | Multi-core: 4933
Singh v1:
Single-core: 1542 | Multi-core: 5079
Singh v1.2:
Single-core: 1506 | Multi-core: 5417
TalkingFOX said:
Not bad. Waiting GPU...
Default, v326:
Single-core: 1340 | Multi-core: 4933
Singh v1:
Single-core: 1542 | Multi-core: 5079
Singh v1.2:
Single-core: 1506 | Multi-core: 5417
Click to expand...
Click to collapse
+1
savijaysalem said:
+1
Click to expand...
Click to collapse
I reverted the oc, once we are able to handel deep sleep and battery drain will enable it again
So 1.3 does not have that much score but that build is rock stable
How to convert ext4 to f2fs ?
#1Gus said:
How to convert ext4 to f2fs ?
Click to expand...
Click to collapse
YouTube it and only do when you know what u r doing f2fs system is not supported by many flavour of android only data one is supported
mpschahal16 said:
YouTube it and only do when you know what u r doing f2fs system is noy supported by many flavour of android only data one is supported
Click to expand...
Click to collapse
Unable to mount after change to f2fs, maybe i need modified TWRP...
btw, thanks for developing this kernel:good:
#1Gus said:
Unable to mount after change to f2fs, maybe i need modified TWRP...
btw, thanks for developing this kernel:good:
Click to expand...
Click to collapse
Support development if u like the work?
Please add maple io scheduler and make it default.
This kernel work in pie?
Lxoric said:
Please add maple io scheduler and make it default.
Click to expand...
Click to collapse
Check v1.5
Gian Firdaus said:
This kernel work in pie?
Click to expand...
Click to collapse
Yes me using pixy
Add support for DT2W please
YadMM said:
Add support for DT2W please
Click to expand...
Click to collapse
Next stable will have it...
anyone using this rom with stock rom i want a kernel to get more battery so is this ryt choice?
I wanted to know if there is a difference between o/c 636 and 660 ?
I wanted to know if there is a difference between o/c 636 and 660 because benchmarks are the same on both geekbench and antutu
mukulmanghani said:
I wanted to know if there is a difference between o/c 636 and 660 because benchmarks are the same on both geekbench and antutu
Click to expand...
Click to collapse
sdm636 and sdm 660 have same sources and both the chipset are almost same
for sdm 636 also we using same 660 dtsi
mukulmanghani said:
I wanted to know if there is a difference between o/c 636 and 660 because benchmarks are the same on both geekbench and antutu
Click to expand...
Click to collapse
They're both same other then gpu andro 509 in sd636 and andro 513(i think so)