I have SM-G960F dual sim 256gb variant of S9
current binary: custom
system status: custom
fap lock: off
OEM lock: off
As it says in the title Twrp says ROM was flashed but any flashed ROM ends ind bootloop. Stock or AOSP.
If anyone can help it would be great
fmaskarin said:
I have SM-G960F dual sim 256gb variant of S9
current binary: custom
system status: custom
fap lock: off
OEM lock: off
As it says in the title Twrp says ROM was flashed but any flashed ROM ends ind bootloop. Stock or AOSP.
If anyone can help it would be great
Click to expand...
Click to collapse
Is you are trying to flash an aosp ROM then first flash this vendor file and then reflash there ROM
www.mega.nz/#!PbJAUAxJ!RI7jiQDm7WpeYMZvmURAWsiDMShEt0UPp5YCarvxuDo
Related
Hi everyone.
Is there a flash counter in Tab 3 7.0 (SM-T211)? After playing around with CWM, I've flashed to an earlier stock official ROM. In download mode, it now reads:
ODIN MODE
PRODUCT NAME: SM-T211
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
HW REV: 0x6
No mention about any flash count here but, I'm not sure what the last line mean, I don't remember what's its value before I flash it
Hello! I'm from Russia. I flash stock rom for my country from ODIN and flash counter have 0
bro2013bro said:
Hello! I'm from Russia. I flash stock rom for my country from ODIN and flash counter have 0
Click to expand...
Click to collapse
Hello. Thanks for replying. How do you confirm it is 0? I can see that it is not displayed in Download Mode, but I'm not certain if it store this "count" somewhere internally or not.
Hi,
I had stock 4.3 firmware on my att i747 galaxy s3, then I decided to flash cyanogenmod. everything went well but i dont really like it.
Now I want to go back to stock. I tried flashing the stock rom with odin but it fails and it says this on the phone:
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: Yes (2 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 1
BOOTLOADER RP SWREV: 2
SW REV CHECK FAIL : Fused 2 > Binary 0
The android version it shows is 4.3.1 and im able to use it normally with the cyanogenmod.
What can I do to flash a stock rom back?
EDIT: used triangle away and the custom binary download says "no" now and the current binary says "samsung official" but still get the same problem.
Thank You
Watch out with the double threads. Some people can get cranky about it.
Hi Guys,
I have an unlock code from AT&T and I want to use it from the Stock ROM. I am currently running CM 11 nightlies.
I tried the standard method of using ODIN from PC to flash stock ROM. It doesnt seem to work. I am always stuck in ;NAND write Fail'.
Before installing CM a while ago I updated OTA to 4.3, and based on what I read everywhere this seems to have something to do with the issue.
Any help on how to proceed will be great.
I am using ODIN 3.07
Downloaded Stock ROM from sammobile.
This is what my download screen reads.
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: Yes (2 Counts)
CURRENT BINARY: CUSTOM
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 1
BOOTLOADER AP SWREV: 2
SW REV CHECK FAIL: Fused 2 > Binary 0
Thanks!
Once you have the 4.3 bootloader, you cannot use Odin to install a stock AT&T ROM. You can try this: http://forum.xda-developers.com/showthread.php?t=2658486
audit13 said:
Once you have the 4.3 bootloader, you cannot use Odin to install a stock AT&T ROM. You can try this: http://forum.xda-developers.com/showthread.php?t=2658486
Click to expand...
Click to collapse
Thanks! I will take a look. Hopefully I can unlock my device at some point.
Was able to unlock based on the lead from post #2
This is what happened:
First I had Android 4.3 with KNOX
Then I flashed CyanogenMOD 11
I hated CyanogenMOD and tried to go back to stock firmware.
I downloaded the stock firmware from samfirmware.com and flashed with ODIN 3.09
Now i'm stuck on the Samsung Logo Boot Screen.
I have tried:
Reflashing
Using KIES emergency firmware recovery
Boot using safe mode.
Can you guys please help!?
Any error message in Odin? What is your current bootloader and which exact firmware are you trying to flash?
Androidwizzard said:
Any error message in Odin? What is your current bootloader and which exact firmware are you trying to flash?
Click to expand...
Click to collapse
CURRENT BINARY: Custom
SYSTEM STATUS: Official
KNOX WARRANTY VOID: 1
AP SWREV: A2
Trying to get stock Samsung firmware N7100UBUEMK4_N7100ZTOEMK3_ZTO
Odin does not shows error message...
RAFAMP said:
CURRENT BINARY: Custom
SYSTEM STATUS: Official
KNOX WARRANTY VOID: 1
AP SWREV: A2
Trying to get stock Samsung firmware N7100UBUEMK4_N7100ZTOEMK3_ZTO
Odin does not shows error message...
Click to expand...
Click to collapse
As your Knox counter says 1 I suppose you are trying to flash an older knox-enabled bootloader over a newer one.
Easiest way to succeed is to flash 4.4.2 firmware instead.
Flashed my root s6 to new official MM6.0.1 firmware from SamFirm using Odin
Device wont boot only see samsung logo then takes me to Android Recovery this is what i see:
Android Recovery
MMB29K.G925TUVU3ED1
samsung/zeroltetmo/zeroltetmo
6.0.1/MMB29K/G925TUVU3EPD1
user/release-keys
...
Supported API: 3
Device does not have DRK, contact to SW PL
Please flash ENG binary then install DRK
It allows me to go into download mode but every time i flash a firmware i get same DRK issue...
Download Mode shows:
ODIN MODE
PRODUCT NAME: SM-G925T
CURRENT BINARY: Samsung Official
SYSTEM STATUS: CUSTOM
FRP LOCK: OFF
Secure Download : Enabled
KNOX WARRANTY VOID: 1 (0x0304)
RP SWREV: B:3 K:2 S:2
already tried...
http://forum.xda-developers.com/note5/help/how-to-solve-dm-verity-verification-t3293306
http://forum.xda-developers.com/tmo.../g925t-4-files-firmware-6-0-1-update-t3357408
and flashing other official software using odin but no luck...