I have a working Zuk z2 plus.
I want to flash a stock firmware to get my warranty back.
I am trying to flash on QFIL, but the port number showing 900E.
how to get port number 9008??
[UPDATE]
I managed to get 9008, but a new problem occurred....."Sahara fail"...
any one knows how to fix????
Related
i accidentally locked my lenovo zuk z2 plus bootloader with no rom flashed
now it just showing zuk logo screen.
used Qfil tool to unbrick it but. its shows error - download failed:swtich to edl failed to switch emergency download mode
any solution ? plz help
You need to boot into EDL mode, currently you're in 900e instead of 9008 mode I believe. Search and you will find multiple guides
Hello there I had just unlocked the bootloader yesterday and flashed an Oreo ROM without updating base bands and now my device doesn't boot up it just shows the bootlogo and turns off again in less than a second it doesn't even charge, good thing is I am able to go to edl mode I guess but then when I tried qfil and mi flash to flash stock rom i m getting the sahara cannot detect com port handle error and the system cannot find the file specified error in mi flash please help its just been a week since I got this phone
Solution
Chin_hebbar said:
Hello there I had just unlocked the bootloader yesterday and flashed an Oreo ROM without updating base bands and now my device doesn't boot up it just shows the bootlogo and turns off again in less than a second it doesn't even charge, good thing is I am able to go to edl mode I guess but then when I tried qfil and mi flash to flash stock rom i m getting the sahara cannot detect com port handle error and the system cannot find the file specified error in mi flash please help its just been a week since I got this phone
Click to expand...
Click to collapse
I've used MiFlash Tool, and the problem was fixed. Sahara Error occurs when you take to much time to flash after booting to EDL, you only have few seconds to flash util the port is closed for writing. QFIL takes around 20 to 25 seconds in caching the files so use MiFlash and It'll flash. Best way to do it is:
1. Install and setup MiFlash for flashing.
2. Open MiFlash and select your Firmware's folder.
3. As soon as you connect the phone refresh miflash and hit flash.
If everything goes well you'll flash will be successful else try again.
I tried doing as fast as a could too on mi flash and it would come up as trying to connect to com4 port something in the status and would eventually come back to same error in the picture.
Chin_hebbar said:
I tried doing as fast as a could too on mi flash and it would come up as trying to connect to com4 port something in the status and would eventually come back to same error in the picture.
Click to expand...
Click to collapse
I need to flash Baseband for Oreo. Please guide me
windows 10 problem
Chin_hebbar said:
Hello there I had just unlocked the bootloader yesterday and flashed an Oreo ROM without updating base bands and now my device doesn't boot up it just shows the bootlogo and turns off again in less than a second it doesn't even charge, good thing is I am able to go to edl mode I guess but then when I tried qfil and mi flash to flash stock rom i m getting the sahara cannot detect com port handle error and the system cannot find the file specified error in mi flash please help its just been a week since I got this phone
Click to expand...
Click to collapse
I face this problem in windows 10.
first uninstall zuk drivers and qfill and disable driver signature enforcement (Google it how to do it) then install zuk drivers and qfill use original cable and your phone will get flashed
Balaji Sriram said:
I need to flash Baseband for Oreo. Please guide me
Click to expand...
Click to collapse
Follow the instruction from this post
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/zuk-z2-baseband-flashing-guide-t3715121
Do not listen to anyone telling you to use miflash, only use qfil otherwise you WILL encounter other issues because qfil is the only way to reach the deeper partitions that mi is unable to... Other issues may range from no volte, calling or signal problems etc its just easier to do it right the first time.
I don't know why but my LG g4 stop working(Only Qualcomm 9008) some days ago. Today I have tried to restore it with QFIL using "H815_Recovery By Moyal" but after download successful it re-entry in Qualcomm 9008 and nothing else.
Can someone tell me what problem could be or another file that working to restore it with QFIL.
Thanks.
Hi all! I ask your help! I have Moto z2 Force on 8.0 Oreo and I installed custom recovery twrp-3.2.1-1-nash.img and foolishly chose Slot-B and then I reboot the phone. Now when connected to a computer, it is defined as Qualcomm HS-USB QDLoader 9008 . How can I bring it back to life?! Help please! :crying:
After many attempts, it was possible to flash blankflash_from_NDX26.183-15_17. Phone reboot in fastboot and then full flash stock firmware.
yakutza said:
After many attempts, it was possible to flash blankflash_from_NDX26.183-15_17. Phone reboot in fastboot and then full flash stock firmware.
Click to expand...
Click to collapse
Samething happened to me but instead of selecting slot b my rom didnt install well so my phone is hardbrick any idea if this file will help me revive my Moto z2 force Tmobile version?
PoisonDash2 said:
Samething happened to me but instead of selecting slot b my rom didnt install well so my phone is hardbrick any idea if this file will help me revive my Moto z2 force Tmobile version?
Click to expand...
Click to collapse
This happened to me on t-mobile yesterday and I managed to solve it by downloading this: (T-Mobile only) https://drive.google.com/file/d/1fM5KLheeMYcs3yF7InOzHq6yGCOmrrbk/view
Extract the zip and while your phone is connected to your pc and booted in bootloader mode, run flash_all.bat, boot (don't flash) TWRP, install TWRP with the TWRP zip found here: https://dl.twrp.me/nash/twrp-installer-nash-3.2.1-1.zip.html
Then reboot to your newly installed TWRP recovery, factory reset, flash rom, reboot bootloader and run "fastboot -w".
After that you should boot up fine. Fastboot -w might not be necessary but I had to do it, otherwise I would boot but I would get an error message "android.process.media has stopped" without it.
Hello Friend!
Do you know if there is a solution for Moto Z2 Play? The update for Android 8 came automatically and I accepted. After a few days, he caught up and got into HardBrick! Neither the BootLoader options (power + volume (-)) are working !!
When I put it in the charger it will flash a white LED
Sorry, I'm using Google Translate
Will71000 said:
Hello Friend!
Do you know if there is a solution for Moto Z2 Play? The update for Android 8 came automatically and I accepted. After a few days, he caught up and got into HardBrick! Neither the BootLoader options (power + volume (-)) are working !!
When I put it in the charger it will flash a white LED
Sorry, I'm using Google Translate
Click to expand...
Click to collapse
If its get detect as QHUSB_BULK in conputer and installing Qualcomm drivers get it to Qh_usbloader 9008 under COMports then theres no way ti revive ur phone. Theres no Blank Flash files yet available for Moto Z2 Play
Hello, after updating to android 10 from the official update via OTA my Zenfone 5Z worked well for few hours until it completely died.
I tried many things in these months, but I cannot access to fastboot and recovery mode nor I can use ADB. Until today my laptop couldn't even see it connected until I shorted the test pins and finally was able to see it as "Qualcomm HS-USB QDloader 9008 (COM3)", but now I'm stuck here.
Now I've downloaded QFIL but cannot find all the files that I need coz most of the links aren't working anymore.
Any help please?
MegyK said:
Hello, after updating to android 10 from the official update via OTA my Zenfone 5Z worked well for few hours until it completely died.
I tried many things in these months, but I cannot access to fastboot and recovery mode nor I can use ADB. Until today my laptop couldn't even see it connected until I shorted the test pins and finally was able to see it as "Qualcomm HS-USB QDloader 9008 (COM3)", but now I'm stuck here.
Now I've downloaded QFIL but cannot find all the files that I need coz most of the links aren't working anymore.
Any help please?
Click to expand...
Click to collapse
here's a link to what someone had posted to unbrick a 5z:
Unbrick Zenfone 5Z.7z
drive.google.com
i've never needed to use it so i don't know if everything is there.
Thank you for the link, I'll download it and will try it