I've been running CyanogenMod 10.2 on my rooted HTC One for a good long while now. Since the ROM worked so well, I never had the need to connect the phone to a computer via USB in quite some time. A few months ago, when I attempted to transfer some photos, I ran into a weird and frustrating road block; my phone is simply not being recognized by any computer <see here>
I have updated all drivers
I have enabled debugging in Developer Options
I have tried rebooting Fastboot in bootloader
I have tried using the toolkits
I have tried everything I think I know
The weird part is that the phone charges via USB connected to the computer.
Since it didn't effect much, I just figured it was a glitch and I never ran into a problem again--that is, until today. I hadn't used my MHL adapter with the HTC One (only my GNexus), but after reviewing an intended installation of a Pioneer Appradio, I wanted to ensure that my One would work with the MHL. Hooking up my One to the Samsung MHL adapter (and power supply of course), I get no display on my television.
I am now beginning to wonder if the USB port is damaged. Visual inspection doesn't reveal anything, but I am curious if anyone has had this problem and would appreciate any help. Is there any way to test if I've fouled up the port?
Does the phone recognize that it is connected to a pc? Can you access the phones storage from your pc?
cmlusco said:
Does the phone recognize that it is connected to a pc? Can you access the phones storage from your pc?
Click to expand...
Click to collapse
No and no
I installed Flashify and did install CWM 6.0.4.7 to see if it would help, but to no avail
Have you tried adb with a different rom or stock via ruu? If it still dosent work then, either your usb port or your cable is messed up.
cmlusco said:
Have you tried adb with a different rom or stock via ruu? If it still dosent work then, either your usb port or your cable is messed up.
Click to expand...
Click to collapse
I have tried adb, but the device never is recognized.
I'm currenty transferring my TWRP backup via WiFi.
I planned on switching to CM11 and see if I can't get it to work after that.
Hi I realize that my phone not able to connect via usb to any device (adb, fastboot, etc). Its simply do not visible in PC. it works only charging mode. No i have flashed TWRM recovery but im not able to put to storage any ROM. Did anyone saw that kind of problem ?
I was trying to transfer some files to my phone through a USB cable today, but the phone was not recognized by the PC at all (Even though it was working a week or so ago). I had some issues before with the cable needing to be still in a certain position or it would disconnect from the PC, so I tried using another USB cable which didn't work either (I tested both USB cables with another device, and both cables were working and the other device was recognized by the PC).
I also updated the USB drivers on my PC with the official drivers on the ASUS support page, and tried putting my phone in fastboot and recovery mode, but both were still not being recognized by my computer. My phone still charges properly, but I am wondering if the USB port got damaged somehow so that it can't connect to a PC anymore?
pyroshroom said:
I was trying to transfer some files to my phone through a USB cable today, but the phone was not recognized by the PC at all (Even though it was working a week or so ago). I had some issues before with the cable needing to be still in a certain position or it would disconnect from the PC, so I tried using another USB cable which didn't work either (I tested both USB cables with another device, and both cables were working and the other device was recognized by the PC).
I also updated the USB drivers on my PC with the official drivers on the ASUS support page, and tried putting my phone in fastboot and recovery mode, but both were still not being recognized by my computer. My phone still charges properly, but I am wondering if the USB port got damaged somehow so that it can't connect to a PC anymore?
Click to expand...
Click to collapse
uninstall and reinstall the drivers. Ensure that phone is not connected during the process.
also have you upgraded your pc os ? if yes then its a little cumbersome to get the same working...
i changed from stock to cm, it is showing well now ... using RR now
Is your phone encrypted? If so you need to unlock in order for your pc to recognize it.
Thank you both of you for the help, unfortunately, my phone was not encrypted so there was no need to unlock in order for it to be detected. Uninstalling and reinstalling the drivers didn't work, and my PC was already on windows 10 since a few months ago. I would also prefer sticking to the stock ROM for this phone for now since they keep coming out with updates.
In addition, I tried using a USB OTG cable to see if the phone could detect the USB drive and my phone couldn't (it has worked before, and my old Galaxy Nexus could still detect it). I also tried plugging my dualshock 3 into the phone, and it also couldn't be detected (also had worked before).
It looks like it's actually a hardware issue and my only option is to RMA it now. I'll have to do it at a time when I don't need my phone as much or when I am not as busy.
PS: In case anyone else has this issue in the future, quick charging also no longer works
zenfone2 I also experienced that, and I have tried several ways, but remains unchanged. I was dizzy today :crying:
Phone works normally except it's undetected by pc. It boots itself, boots to twpr (3.0.2.-3) or fastboot. I flashed various roms, after some time detected that couldn't access storage, but didn't actually care - thought it's something with those beta stage roms.
Decided to flash original rom, but neither adb or fastbot are working. Actually, windows even won't detect device. At all. No signal that i connected cable. The phone meanwhile keeps charging. Tried to connect at manjaro linux with same luck - adb devices or fastboot devices won't detect anything.
Formated data in TWRP (thought, that it was encryption i used fault), but no luck. Now i could load to TWRP, bootloader. Is there any possible ways to get phone back to reality before me trying LGUP scary thing?
updated. could that be somehow damaged cable fault?? i checked with my wife's phone (same model) and it's not detected either. it's a nilkin cable, worked perfectly before. could that be possible somehow to damage a cable that it would only charge phone? or i bricked both nexuses?
updated 2. oh my, LGUP also detects nothing. this seems like a bricked phone.
updated. faulty cable.
I was running the Developer Preview Beta 2 and noticed that my device would no longer communicate correctly with my OTG usb jump drive, I tried all the normal trouble shooting techniques and nothing worked. I than tried connecting my phone to my computer and my computer would no longer connect to my device either. I didn’t think this was a big deal so I was going to just flash back to the May factory image from my computer.
This did not work, so I did a factory reset in TWRP hoping that this would clear out the issue that was stopping the phone from usb communication. It did not fix the issue. So normally in TWRP I can always plug a flash drive into the phone through the otg and explore the files, however for some reason this was still not possible, something has happened to the device where it no longer allows incoming or outgoing usb communication. The device still charges however it is no longer recognized at all by my computer nor does the device recognize usb drives. I have all the latest USB drivers and updates needed. I uninstalled and reinstalled my drivers on my computer as well. The main issue I feel like I am having here, is that the device no longer wants to communicate with usb asides from charging, this is why it is not seeing the otg storage when I plug it in while I am in TWRP.
I am at a loss, I can boot into twrp and explore the device, this is useless as i deleted all the files on the device, TWRP will not allow a usb to be found so i cannot flash anything to the device. My computer does not see the phone so i cannot fastboot anything to the device. I have tried everything, DUECS script, skipsoft, none of them have identified a device. This is further verified by running cmd and typing in adb devices, to which the response is a blank line.
How can a device be bricked, but somehow have TWRP recovery working, along with the ability to boot the device into fastboot/the bootloader (and yes the bootloader is unlocked still)? If anyone has any ideas of how I can get this thing to be recognized by my computer please let me know.
jasonstackhouse said:
I was running the Developer Preview Beta 2 and noticed that my device would no longer communicate correctly with my OTG usb jump drive, I tried all the normal trouble shooting techniques and nothing worked. I than tried connecting my phone to my computer and my computer would no longer connect to my device either. I didn’t think this was a big deal so I was going to just flash back to the May factory image from my computer.
This did not work, so I did a factory reset in TWRP hoping that this would clear out the issue that was stopping the phone from usb communication. It did not fix the issue. So normally in TWRP I can always plug a flash drive into the phone through the otg and explore the files, however for some reason this was still not possible, something has happened to the device where it no longer allows incoming or outgoing usb communication. The device still charges however it is no longer recognized at all by my computer nor does the device recognize usb drives. I have all the latest USB drivers and updates needed. I uninstalled and reinstalled my drivers on my computer as well. The main issue I feel like I am having here, is that the device no longer wants to communicate with usb asides from charging, this is why it is not seeing the otg storage when I plug it in while I am in TWRP.
I am at a loss, I can boot into twrp and explore the device, this is useless as i deleted all the files on the device, TWRP will not allow a usb to be found so i cannot flash anything to the device. My computer does not see the phone so i cannot fastboot anything to the device. I have tried everything, DUECS script, skipsoft, none of them have identified a device. This is further verified by running cmd and typing in adb devices, to which the response is a blank line.
How can a device be bricked, but somehow have TWRP recovery working, along with the ability to boot the device into fastboot/the bootloader (and yes the bootloader is unlocked still)? If anyone has any ideas of how I can get this thing to be recognized by my computer please let me know.
Click to expand...
Click to collapse
I would try a different cable as this device is very finicky; that solved my issue of the computer not recognizing the phone.
Is it possible that your device's USB port data transfer function is damaged, but the charging portion is functional, making it a weird hardware failure?
You know, like the old days when the charge port would break or wiggle loose, and sometimes it would charge and sometimes it wouldn't, depending on the angle of the cable in the mini usb port?
Az Biker said:
Is it possible that your device's USB port data transfer function is damaged, but the charging portion is functional, making it a weird hardware failure?
You know, like the old days when the charge port would break or wiggle loose, and sometimes it would charge and sometimes it wouldn't, depending on the angle of the cable in the mini usb port?
Click to expand...
Click to collapse
That would be nice if that were the problem, but unfortunalty I do not think it is. For example, when the issues first began, before I did the factory reset on the device, windows would pop up a message that said unknown device, and failure to connect. After the factory reset in TWRP the computer gave up all together in recognizing the phone. Another sign it was likely not a hardware failure was when the device was on and i was attempting to connect the otg usb to the phone it would give me some weird options. With android P the options were, allow this device to control the usb, or allow the USB to control the USB. that made no sense to me since why would i want the the USB to have any control, it couldnt do anything its not a computer its only a storage device. However, even though I had file transfer selected in developer options, it would not allow this connection. The options were all greyed out and it would not allow the pixel to have control over the usb device.
As for USB cords I have used without fail the google issued USB cord that came with the Pixel 1 xl, It has never faile me or had any issues. It is still fully functional as I was able to use it to connect my girls note 8 to my computer for file transfers and all other things my phone is not doing anymore.
I reached out to google and explained the situation to them, after i told them I was on Dev preview beta and they verified this to be true they told me this is likely a hardware failure and offered to replace the device. I am now waiting on the new device to be sent to me, however still cant accept that i cant recover the current device with an unlocked bootloader, TWRP installed, and access to fastboot/bootloader screen. I have seriously bricked phones before as in they would not even turn on and I was able to get them back up and running, this would be my first ever device I could not recover and what makes it worse is that it actually has TWRP installed and powers on and off just fine.
Sorry for the obvious question: Do you have the latest drivers? I don't have the drivers set to the whole system (Windows), so if I don't CD into my fastboot folder, I can't do anything because the system wide drivers aren't current. Don't know if that could be your issue?
I'm too lazy to fix the PATH of my drivers ¯\_(ツ)_/¯
I had an issue similar to this. I was trying to hook up a USB c to Ethernet adapter. It worked fine on April's patch but after I flashed Mays the phone wouldn't recognize it. After I plugged it in my phone rebooted and I no longer had access to developer options and it wouldn't read any usb device. Luckily I had a TWRP backup on my device. Once I flashed the backup which was only about a week old everything worked again. I haven't tried using the adapter again. I think something in the data partition got corrupted. I tried just restoring the boot and system partition and that didn't fix it. Try doing an advance wipe and formatting the data partition. That might get you back up and going.
have we even seen a bricked device yet?
twiz0r said:
have we even seen a bricked device yet?
Click to expand...
Click to collapse
I didn't think it was possible, I still dont understand how this is happening. For the other responses above, I have all the drivers up to date, and I already formatted data, wiped everything. At this point I would like to see if there is anyway to delete TWRP recovery from the device, anything, I have no OS on the device, but for some reason still have TWRP on both A and B.
I almost dont want to give the phone back to Google because I want to figure out what happened and how to fix it, its definitely not broken/bricked like you see when someone flashes the wrong files to a device, it just has no USB connection capabilities which in-turn have rendered the device useless.
When I had Samsung phones if you bricked a device to the point it doesn't even turn on correctly you could always save it still using ODIN. Its weird that the google flagship device and software doesn't have its own proprietary flash software like Samsung, LG and HTC, we just have adb/fastboot, I feel like if we did, i may be able to get this thing started again.
have you tried using something like quickboot from the playstore to be able to get to fastboot?
I had a similar thing happen a few weeks ago on oreo. PC wouldn't 'see' the phone, but it would charge very slowly.
I installed quickboot, booted to fastboot and was able to flash the factory image
Pyr0x64 said:
have you tried using something like quickboot from the playstore to be able to get to fastboot?
I had a similar thing happen a few weeks ago on oreo. PC wouldn't 'see' the phone, but it would charge very slowly.
I installed quickboot, booted to fastboot and was able to flash the factory image
Click to expand...
Click to collapse
I can't access the play store on the device in it's state. I do have access to fastboot. I can boot the phone to fastboot, and into TWRP, only problem is the phone doesn't communicate with the computer in either state. If the pixel had a SD card slot I would just load up a recovery but unfortunately we don't have that luxury
What cable are you using to connect to the PC? Is it USB c to USB c?
Sent from my Pixel 2 XL using XDA Labs
Triscuit said:
What cable are you using to connect to the PC? Is it USB c to USB c?
Sent from my Pixel 2 XL using XDA Labs
Click to expand...
Click to collapse
The cable is not the issue, I confirmed this by testing all my cables with the new device that I just received for my warranty exchange. I also tried my luck with Linux, after a complicated installation on my computer I was able to have Linux actually detect the device (partially) when the device was plugged in at splash screen I got nothing, at fastboot/bootloader screen nothing, but once the phone booted into TWRP it came up as AOSP device, when I attempted clicking on the AOSP device being detected by Linux an error message popped up telling me mtp or midi error, not sure for sure what one it said. Either way I couldn't connect for any transfer of information, I tried adb sideload and that failed as well.
This has been an experience for the memory books, glad that old device is gone and I'm back up and running on a working phone. No more beta testing for me, I'll be ready for Android P when they get it out of beta, I don't have the time or patience to deal with any more warranty exchanges.