Hi Guys! I have a Samsung S5 sport that I recently dirty flashed to the 14.1-20180803-NIGHTLY-kltesprsports build. Now my battery does not go beyond 65% no matter how long I leave my phone plugged in. I have tested different cables and adapters, and still the same thing. I never had this issue with the 20180720 build. Any thoughts?
onlyoneway said:
Hi Guys! I have a Samsung S5 sport that I recently dirty flashed to the 14.1-20180803-NIGHTLY-kltesprsports build........
Click to expand...
Click to collapse
I don't have this variant but, your best bet is to post this question within the following Official LineageOS thread that's specific to your device for support and guidance.
https://forum.xda-developers.com/showthread.php?t=3727763
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Ibuprophen said:
I don't have this variant but, your best bet is to post this question within the following Official LineageOS thread that's specific to your device for support and guidance.
https://forum.xda-developers.com/showthread.php?t=3727763
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Click to expand...
Click to collapse
Thanks
Related
Is it possible to install? When I install, it crashes after I run it. Is LineageOS 14.1 incompatible? S8 TouchWiz requires Android 7.0 and above and I run 7.1.2 on my phone.
AndrewChief said:
Is it possible to install? When I install, it crashes after I run it. Is LineageOS 14.1 incompatible? S8 TouchWiz requires Android 7.0 and above and I run 7.1.2 on my phone.
Click to expand...
Click to collapse
I don't have this device but, the following area of the forum is specific to your device.
https://forum.xda-developers.com/galaxy-s8
With that stated...
I believe that the following threads may be helpful to you since they are/have posts regarding TouchWiz.
https://forum.xda-developers.com/showthread.php?t=3668612
https://forum.xda-developers.com/showthread.php?t=3662555
If you are unable to obtain any guidance from the above threads then your best bet is to post your question within the following thread.
https://forum.xda-developers.com/showthread.php?t=3582142
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Thank yuo
thank you
Hi guys,
I recently had a bootloop problem with CM13 on redmi note 3 pro kenzo, after whcih I upgraded to LOS 14, the official rom on the website and flashed it along with gapps using twrp.
Now the fingerprint scanner, which worked fine on CM13, does not work on LOS14.
It doesn't even make the small gesture vibrations when I put my finger against it.
I restored the last version of CM13 and it still works on it.
What can I do to solve this problem?
Any help would be very much appreciated.
Thanks!
emiki said:
Hi guys, I recently had a bootloop problem with CM13 on redmi note 3 pro kenzo, after whcih I upgraded to LOS 14, the official rom on the website and flashed it along with gapps using twrp...
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Official LineageOS 14.1 thread for your device.
https://forum.xda-developers.com/showthread.php?t=3542491
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Got it working
Ibuprophen said:
I don't have this device but, your best bet is to post this question within the following Official LineageOS 14.1 thread for your device.
https://forum.xda-developers.com/showthread.php?t=3542491
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Click to expand...
Click to collapse
Hi Buddy,
Thanks for your quick reply. I managed to get it working now
The problem was when I installed CM13, I also did a firmware update, which was the culprit.
Now when I installed LOS14 I had to re-flash the latest firmware, in the link you posted.
I downloaded the firmware and flashed it with TWRP.
I have another issue though, in CM13 the fingerprint sensor would cover all of my fingertip's angles and now it seems that I have to hold it somewhat more 'parallel' to the sensor or else it won't get it. I did try rotating the finger a bit while setting it up but CM13 seemed more rubust. Any ideas?
Thanks a bunch!
emiki said:
I have another issue though, in CM13 the fingerprint sensor would cover all of my fingertip's angles and now it seems that I have to hold it somewhat more 'parallel' to the sensor or else it won't get it. I did try rotating the finger a bit while setting it up but CM13 seemed more rubust. Any ideas? Thanks a bunch!
Click to expand...
Click to collapse
I'm sorry but, I have no idea without ever having this device...
Posting your question within the appropriate thread (I had previously provided you) would be your best bet for member/developer support and guidance.
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Ibuprophen said:
I'm sorry but, I have no idea without ever having this device...
Posting your question within the appropriate thread (I had previously provided you) would be your best bet for member/developer support and guidance.
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Click to expand...
Click to collapse
Thanks!
Never mind its working correctly now. I just re-did the fingerprint thing and it's working great.
can't get my fingerprint to work on LOS 17.1, it's like it's there, but it doesn't react to anything. When I go to the fingerprint settings, it ask me to touch it in order to setup the thing, but when I place my finger on it, it does nothing. Did anyone ever heard of this issue or any fix for it? Thanks in advance.
Running recent build of 14.1 on a LG V20 US996 model.
Doesn't seem to recognize a USB OTG drive at all. Clearly this isn't a hardware issue as TWRP recognizes it fine, but it's a royal PITA to have to keep rebooting to recovery whenever I want to copy files from/to a USB drive.
Since USB OTG seems to work on other devices running LOS 14.1, is this just a matter of the maintainer of the build for my phone not including support for it for some reason?
Exabyter said:
Running recent build of 14.1 on a LG V20 US996 model...
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Official LineageOS thread for your device.
https://forum.xda-developers.com/showthread.php?t=3509953
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Ibuprophen said:
I don't have this device but, your best bet is to post this question within the following Official LineageOS thread for your device.
https://forum.xda-developers.com/showthread.php?t=3509953
Good Luck!
Click to expand...
Click to collapse
Thanks for that, I was looking for a dedicated forum previously, I guess I'll settle for a dedicated thread..
Exabyter said:
Thanks for that, I was looking for a dedicated forum previously, I guess I'll settle for a dedicated thread..
Click to expand...
Click to collapse
The following link is to the device dedicated area of the forum that's specific to the LG V20.
https://forum.xda-developers.com/v20
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
hello, iam on Lineage OS 15.1 I use alot of banking apps, so tried to flash magisk via TWRP which gives me an error 1.
how do get pass this?
psyfi said:
hello, iam on Lineage OS 15.1 I use alot of banking apps, so tried to flash magisk via TWRP which gives me an error 1. how do get pass this?
Click to expand...
Click to collapse
I don't use Magisk but, your best bet is to post this question within the following General Q&A Magisk thread.
https://forum.xda-developers.com/showthread.php?t=3432382
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Ibuprophen said:
I don't use Magisk but, your best bet is to post this question within the following General Q&A Magisk thread.
https://forum.xda-developers.com/showthread.php?t=3432382
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Click to expand...
Click to collapse
I wouldn't waste time with this, far better to just use the banks main sites via a good browser.
After yesterday's update to lineage on my tmobile Samsung s5, it seems the predictive apps stopped working and i can't get it to come back. Anyone else having the same issue?
toddsdonald said:
After yesterday's update to lineage on my tmobile Samsung s5,.......
Click to expand...
Click to collapse
Your best bet is to post this question within the following Official LineageOS thread that's specific to your device for support and guidance.
https://forum.xda-developers.com/showthread.php?t=3476433
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.