Related
100% Tested Stock Firmware of LeTv Le1S x507&x509 Indian Version
5.5.014s
How To Flash
Follow this...
Extract "X507_Stock_Rom.rar" and install MTK_USB_Windows_Driver drivers inside rar file
1. Goto "SP_Flash_Tool" folder and open "flash_tool.exe"
2. Select "Download-Agent" as "MTK_AllInOne_DA"
3. Select "Scatter file" from "X507_Stock_Rom" folder
now all files will be selected.
4. Change "Download Only" to " Firmware Upgrade"
5. Now Very Imp Step Press together Ctrl+Alt+S
This will Enable "Security Mode" and "Authentication File"
option will be Visible below "Scatter file" option.
6. Now Click on "Auth File" Option and Select "auth_sv5.auth"
file From SP_Flash_Tool" Folder
7. Hit "Download" Button.
8. Press volume up key and
Connect USB cable to mobile in Powered Off Condition
Firmware x507&x509 5.5.014s:-
https://drive.google.com/uc?id=0B2Ddi-DetFSLRjJrSk9abmM4Tms&export=download
Sp Tool:-
https://drive.google.com/file/d/0B5KBP3GG99Q2QUF1VjFmQWs5TFE/view
Mtk Preloder Driver:-
https://drive.google.com/file/d/0By_LtpUoEtFzUDNZLW9JeHhhNnc/view
Video Guide:-
https://www.youtube.com/watch?v=cUijr0JXl8c
Hit thanks if u like my work.........................
after flash this file now phone is total dead , not connected to pc only red light when plug usb or charger
Followed everything, but not able to install recovery
https://ibb.co/kfvxa5
I GOT THIS ERROR..............................................
jagdish1747 said:
after flash this file now phone is total dead , not connected to pc only red light when plug usb or charger
Click to expand...
Click to collapse
Go to fastboot .connect pc
Enter fastboot -w
it will wipe everything thing including data
Reboot to fastboot again
Connect pc
Enter fastboot flash recovery recovery.img (download any recovery)
Reboot to recovery ..flash any os zip
Use volume down+power for fastboot
Use volume up+power for recovery
Where should i enter fastboot -w ???
Kiranshyd said:
Where should i enter fastboot -w ???
Click to expand...
Click to collapse
Vol down+power it will open fastboot mode ..connect usb
If u have mfastboot files open that folder and open cmd from there
If fastboot unlocked u can use fastboot -w directly orelse u have to unlock it first
Need guide regarding fastboot and files u can google them or xda ...
Ubd debugging not enabled, mobile dead
light, it means usb debugging not enabled now, so fastboot command will work or not?? If works, how, wat to do., Please explain bro
---------- Post added at 09:01 AM ---------- Previous post was at 09:00 AM ----------
joshi1 said:
Vol down+power it will open fastboot mode ..connect usb
If u have mfastboot files open that folder and open cmd from there
If fastboot unlocked u can use fastboot -w directly orelse u have to unlock it first
Need guide regarding fastboot and files u can google them or xda ...
Click to expand...
Click to collapse
My mobile dead, only red light coming, it means usb debugging not enabled now, so fastboot command will work or not?? If works, how, wat to do., Please explain bro
https://docs.google.com/file/d/0B2ghGhwyFr5hOWxvZWdBR3VkRlE/view
Download this and extract to your desktop go to the folder
Hold left shift+ right click mouse u will get open command here it will open command window
Disconnect pc and mobile.
Switchoff mobile
Hold volume down +power u will enter fastboot mode
Connect pc now ... Pc will download drivers and install
If u never heard of oem lock ... First install adb drivers from here https://drive.google.com/file/d/0B8HspVLwTTxtWWJsYnNJR2kxeEE/view
Then preloader by this guide
https://forum.xda-developers.com/showthread.php?t=2180436
Now open command prompt .. type
fastboot devices
U will get ur mobile there
Type
Fastboot oem unlock
It will unlock ur device ..
Then type
Fastboot -w
It will wipe everything
Download twrp.img from forum and rename it as recovery
https://dl.twrp.me/x3/twrp-3.1.1-0-x3.img.html
Place it in the same folder of fastboot
Type
Fastboot flash recovery recovery.img
It will show writing done or okay
Now hold volume up+power this will lead u to recovery
Download any rom and flash it
Thanks , My device is X500. Can i flash it?
I am on custom rom (AOKP) , rooted with TWRP.
Is there any way to flash the Stock ROM directly from TWRP ?
hypermaster said:
I am on custom rom (AOKP) , rooted with TWRP.
Is there any way to flash the Stock ROM directly from TWRP ?
Click to expand...
Click to collapse
Yes change updater script or just find 19s twrp flashable file
phone is dead after flash model x509
nrisnadeem said:
phone is dead after flash model x509
Click to expand...
Click to collapse
Cool, now buy a new phone
mannuelectronics said:
https://ibb.co/kfvxa5
I GOT THIS ERROR..............................................
Click to expand...
Click to collapse
getting same error
My display is not working, it won't respond to touch. I successfully flashed the ROM twice but the problem is still there.please help.
PS- I recently changed my screen while I was on a custom ROM. Does thatchange anything?
Sanjay354 said:
My display is not working, it won't respond to touch. I successfully flashed the ROM twice but the problem is still there.please help.
PS- I recently changed my screen while I was on a custom ROM. Does thatchange anything?
Click to expand...
Click to collapse
Your screen is the problem. 3rd Party displays
Abhi_ said:
Your screen is the problem. 3rd Party displays
Click to expand...
Click to collapse
------------------------------------------------------------------------------------
any idea on how to solve it? {im thinking i might be able to use my phone with a mouse and otg,although i haven't tried it yet}
Help
i am currently on Eui 5.5.014s and cannot update to latest Eui version please help !!!!!!!!!
NO Update Coming
naeem210 said:
100% Tested Stock Firmware of LeTv Le1S x507&x509 Indian Version
5.5.014s
How To Flash
Follow this...
Extract "X507_Stock_Rom.rar" and install MTK_USB_Windows_Driver drivers inside rar file
1. Goto "SP_Flash_Tool" folder and open "flash_tool.exe"
2. Select "Download-Agent" as "MTK_AllInOne_DA"
3. Select "Scatter file" from "X507_Stock_Rom" folder
now all files will be selected.
4. Change "Download Only" to " Firmware Upgrade"
5. Now Very Imp Step Press together Cntl+Alt+S
This will Enable "Security Mode" and "Authentication File"
option will be Visible below "Scatter file" option.
6. Now Click on "Auth File" Option and Select "auth_sv5.auth"
file From SP_Flash_Tool" Folder
7. Hit "Download" Button.
8. Press volume up key and
Connect USB cable to mobile in Powered Off Condition90
Firmware x507&x509 5.5.014s:-
https://drive.google.com/uc?id=0B2Ddi-DetFSLRjJrSk9abmM4Tms&export=download
Sp Tool:-
https://drive.google.com/file/d/0B5KBP3GG99Q2QUF1VjFmQWs5TFE/view
Mtk Preloder Driver:-
https://drive.google.com/file/d/0By_LtpUoEtFzUDNZLW9JeHhhNnc/view
Video Guide:-
https://www.youtube.com/watch?v=cUijr0JXl8c
Hit thanks if u like my work.........................
Click to expand...
Click to collapse
Can Anyone tell me why there is no update coming or when i try to install the update from the recovery of local update it says Failed to update -- cause : error with signature help me i want to update eui 5.5 to 5.8 pls
After failing some 1-click rooting methods, for the first time I tried to do it the hard way.
That turned out to be a pretty easy way thanks to some handy links to drivers and other files I found.
Infinity thanks to the thread I found platform-tools from and the website called "getdroidtips" for the Custom TWRP for the HS2.
NOTE: THIS GUIDE WILL WIPE YOUR DEVICE SO BE PREPARED
Standard warning: FOLLOW THIS GUIDE AT YOUR OWN RISK. REMEMBER, AS PER MY NAME I AM A TOTAL NUB. I DO NOT TAKE RESPONSIBILITY FOR YOUR PHONE MALFUNCTIONING, BRICKING, BLOWING UP OR DROWNING IN COOKING OIL (rip my Elephone S7)
Pastebin code for missing links: F2RGqM1A
1) Preparation
Download the latest Flashable.Zip from [ ]
Place SuperSu.zip in your sd card or internal storage
Enable Developer Options by going to Settings -> "About Phone" -> Click "Software Version" 7-8 times
Go to developer Options in Settings
Enable OEM Unlocking
Enable USB Debugging
Shutdown your phone by holding the power button
Boot into fastboot by holding the Volume Up key + Power Button
Press Volume Down key to get into fastboot
2) On your Windows PC:
Download the file from [ ] and extract the platform-tools folder (I extract to "D:\Downloads" in this example)
Download the Custom TWRP from [ ] and place it inside the platform-tools folder
Connect your device to your computer
press Win+R, type cmd and press enter
2.1) (not always needed)
If your device won't connect or the steps below don't work, try updating drivers:
Connect your phone while it's in fastboot
open start menu, search and open Device Manager
check inside Portable Devices or Android Devices for your phone's name
or look for Android Bootloader Interface
if it's not there, it might be named something else, with an icon that has a yellow triangle inside it.
Right click it, Update Driver
> Browse my computer for driver software
> Let me pick from a list of available drivers on my computer
> select Android Bootloader Interface
to check if you are connected, type "fastboot devices" in cmd and you'll see a device code
3) Unlocking Bootloader
In cmd, enter the following commands:
Code:
D:
cd D:\Downloads\platform-tools
fastboot oem unlock-go
THIS STEP WILL WIPE YOUR DEVICE DATA
wait for restart
4) Booting into TWRP
Go to device Settings again and ensure OEM Unlocking and USB Debugging are still Enabled. Reboot into fastboot.
In cmd:
Code:
fastboot boot twrp-3.1.1-0-20171128-UNOFFICIAL-HS2.img
(In case above cmd line doesn't work, type "fastboot boot twrp" and press Tab)
5) Backing up your rom and data (Optional but recommended)
Inside TWRP, Click Backup, tick everything, select desired directory and swipe to backup.
Reboot and follow step 5 again if needed
6) Installing SuperSU with root privileges
Inside TWRP, Click Install and select SuperSU.zip
Swipe to install and reboot
Enjoy
Please port miui 9 or lineage os 15 for micromax canvas infinity hs2
NubbyMcNubNub said:
After failing some 1-click rooting methods, for the first time I tried to do it the hard way.
That turned out to be a pretty easy way thanks to some handy links to drivers and other files I found.
Infinity thanks to the thread I found platform-tools from and the website called "getdroidtips" for the Custom TWRP for the HS2.
NOTE: THIS GUIDE WILL WIPE YOUR DEVICE SO BE PREPARED
Standard warning: FOLLOW THIS GUIDE AT YOUR OWN RISK. REMEMBER, AS PER MY NAME I AM A TOTAL NUB. I DO NOT TAKE RESPONSIBILITY FOR YOUR PHONE MALFUNCTIONING, BRICKING, BLOWING UP OR DROWNING IN COOKING OIL (rip my Elephone S7)
Pastebin code for missing links: F2RGqM1A
1) Preparation
Download the latest Flashable.Zip from [ ]
Place SuperSu.zip in your sd card or internal storage
Enable Developer Options by going to Settings -> "About Phone" -> Click "Software Version" 7-8 times
Go to developer Options in Settings
Enable OEM Unlocking
Enable USB Debugging
Shutdown your phone by holding the power button
Boot into fastboot by holding the Volume Up key + Power Button
Press Volume Down key to get into fastboot
2) On your Windows PC:
Download the file from [ ] and extract the platform-tools folder (I extract to "D:\Downloads" in this example)
Download the Custom TWRP from [ ] and place it inside the platform-tools folder
Connect your device to your computer
press Win+R, type cmd and press enter
2.1) (not always needed)
If your device won't connect or the steps below don't work, try updating drivers:
Connect your phone while it's in fastboot
open start menu, search and open Device Manager
check inside Portable Devices or Android Devices for your phone's name
or look for Android Bootloader Interface
if it's not there, it might be named something else, with an icon that has a yellow triangle inside it.
Right click it, Update Driver
> Browse my computer for driver software
> Let me pick from a list of available drivers on my computer
> select Android Bootloader Interface
to check if you are connected, type "fastboot devices" in cmd and you'll see a device code
3) Unlocking Bootloader
In cmd, enter the following commands:
THIS STEP WILL WIPE YOUR DEVICE DATA
wait for restart
4) Booting into TWRP
Go to device Settings again and ensure OEM Unlocking and USB Debugging are still Enabled. Reboot into fastboot.
In cmd:
(In case above cmd line doesn't work, type "fastboot boot twrp" and press Tab)
5) Backing up your rom and data (Optional but recommended)
Inside TWRP, Click Backup, tick everything, select desired directory and swipe to backup.
Reboot and follow step 5 again if needed
6) Installing SuperSU with root privileges
Inside TWRP, Click Install and select SuperSU.zip
Swipe to install and reboot
Enjoy
Click to expand...
Click to collapse
Hi please help me, after flashing recovery my phone is on bootloop now, what do i do
Hem97 said:
Please port miui 9 or lineage os 15 for micromax canvas infinity hs2
Click to expand...
Click to collapse
I wish I could.
Sudhangshu said:
Hi please help me, after flashing recovery my phone is on bootloop now, what do i do
Click to expand...
Click to collapse
Did you try "flashboot boot twrp..." like in my guide or "flashboot flash twrp..."?
And which twrp image did you use?
In any case, if you can still get to the fastboot screen, try booting with the twrp image in Step 4 above (download links in the pastebin link)
NubbyMcNubNub said:
I wish I could.
Did you try "flashboot boot twrp..." like in my guide or "flashboot flash twrp..."?
And which twrp image did you use?
In any case, if you can still get to the fastboot screen, try booting with the twrp image in Step 4 above (download links in the pastebin link)
Click to expand...
Click to collapse
Hi, "flashboot boot twrp" wasnt working at all, so i tried "flashboot flash twrp" and all i have is a bootloop. So after flashing recoveru i booted my phone to fastboot and run the command, " flashboot boot recovery recovery.img" where recovery is the custom recovery image and it booted into recovery. Then there is one more step to do that allowed me to finally boot into my os. Its working fine and i still have twrp installed on my phone
---------- Post added at 06:53 PM ---------- Previous post was at 06:49 PM ----------
NubbyMcNubNub said:
I wish I could.
Did you try "flashboot boot twrp..." like in my guide or "flashboot flash twrp..."?
And which twrp image did you use?
In any case, if you can still get to the fastboot screen, try booting with the twrp image in Step 4 above (download links in the pastebin link)
Click to expand...
Click to collapse
Btw i dont find any pastebin links, im sorry im just a noob too..... Lol
Want custom rom for Qmobile Qinfinity
I want a custom rom for Qmobile Qinfinity.
Because its own rom lags and does not have full features. Please give the rom like lineage os,RR,Or Stock
Please Help?:good:
hi bro,recently i just buy a new phone which is micromax canvas infinity.i have rooted my phone successfully,but there are no custom roms available for this phone.can you develop any custom rom for this phone?that will be very helpful...
Last time I tried to downgrade to MIUI 9 with MiFlashTools, I accidentally had relock clicked and ended up bricking my device. So I don't want that to happen again but I hate MIUI and want AOSP
I couldn't find a guide on how to downgrade to Android 9, even though all the other guides tell you to downgrade. It'd be great if someone wrote a guide and I'd edit this post with the answer or they could create another thread.
Right now I'm on global MIUI 12 locked. Waiting for your replies
@wentaas
Once you get your bootloader unlocked, download Android 9 fastboot firmware and MiFlash. Install fastboot drivers, enter fastboot mode on begonia and connect it to the PC. Select folder with firmware in MiFlash, click refresh - phone should appear in program. Change "clean all and lock" to "clean all" and press "Flash" button.
wojownikhaha said:
@wentaas
Once you get your bootloader unlocked, download Android 9 fastboot firmware and MiFlash. Install fastboot drivers, enter fastboot mode on begonia and connect it to the PC. Select folder with firmware in MiFlash, click refresh - phone should appear in program. Change "clean all and lock" to "clean all" and press "Flash" button.
Click to expand...
Click to collapse
thank you and sorry for the late reply for some reason i cant unlock my device so i opened another thread for that https://forum.xda-developers.com/t/...-status-says-request-parameter-error.4236965/ this is harder than it should be tbh ugh
Basically I have rooted my old Redmi Note 4 but that was past guarantee so I did not care that much.
My current RN 8 Pro is still 1 year in guarantee so I literally do not have the balls to do it on my own.
Is there any good soul who would help me out with rooting it, pretty please? Thanks very much in advance
btw. I do know stuff about Unlocking Boot Loader, installing TWRP trough Command Window and Flashing Magisk...that should be potentially enough but as I said above no balls and do not want to F things up and brick it.
Redmi Note 8 Pro Guide [Firmwares | ROOT CN/GLOBAL | TWRP Recovery]
Redmi Note 8 Pro [Begonia] [Global Version Only] WARNING: Before attempting to root your device, do note that by unlocking your bootloader and modifying your device with root, ROMs, etc... you are risking voiding your warranty! I am NOT...
forum.xda-developers.com
A great guide is here :3
Not sure you need my help for that but yeah if ya run into any problems, ill be here to help ya
Ty for responding. I read that but Im still not sure about what TWRP use on my phone (im not sure if i have to use special one or just latest version) and because I want to only root my phone Im also not sure, if I need to get a different ROM or I can do that on this STOCK ONE I have.
I bought my RN 8 Pro in EU. Im gonna try to give you more information about my phone, if you would be able to link me TWRP what I need and other files to root it...that would be awesome (its not like i cant read or im lazy f**k, its more like i dont want to F things up).
Version of MIUI: MIUI Global 12.0.5; Stable 12.05.0(QGGEUXM)
Version of Android: 10 QP1A. 190711.020
Android Level of Security: 2021-04-01
Thank you very much
1. UNLOCKING BOOTLOADER :
- Download the Mi Unlock app to PC, and sign in with your Mi Account;
- Enable Developer Option in your phone by tapping the "Build Number" 7 times
- Go to Developer Options "Settings > Additional Settings > Developer Options
- Enable USB Debugging and OEM Unlocking
- Aslo add account in Mi Unlock Status (Can be found in Developer Options
- Install all the required drivers (adb drivers, vcom drivers etc.) In your PC [I'll link these below]
- Shut down your phone manually, and hold Volume down key and Power button to enter Fastboot mode
- Connect your phone to PC using USB cable and click "Unlock". In Mi Unlock Tool
- You will be given a specific time (168 hours mostly)
- Wait until that and redo Unlock process
- Your device’s bootloader is unlocked
2. FLASHING TWRP :
- Install Minimal ADB and fastboot on your PC [Link will be provided below]
- Download LR Team TWRP [This work for now, I'll provide link below and will update it after we have another proper TWRP]
- Put that TWRP in the file location of ADB and Fastboot (Right click on Minimal ADB and Fastboot icon on desktop and click on Open file location)
- rename that recovery to "twrp" for convenience (optional)
- Now Connect your phone to PC With USB Debugging on (keep phone on).
- Type
Code:
adb devices
and accept the pop up on phone's screen.
- Now reboot your phone to Fastboot mode
- Type
Code:
fastboot devices
- Your device ID will be visible on Screen.
- Then type
Code:
fastboot flash recovery twrp.img
- When it's done, Remove cable and Hold Power + Vol. Up when phone starts turning on leave the power button but keep pressing Vol. UP until TWRP splash Screen shows up.
- Done
3. ROOTING :
- In TWRP mount System
- Go to Advanced > file manager
- then go to system_root > system and delete "recovery-from-boot.p"
- Go home and again go to advanced and Select "Close AVB2.0" swipe to confirm.
- Go back and select "Install Root"
- Here you go magisk 19.4 will be installed (U can chose any other versions afterwards.)
- Reboot the device to system.
- Done!
LINKS
1. Mi Unlock tool
2. Minimal ADB and Fastboot
3. ADB Drivers for MTK
4. MTK USB Drivers
5. LR Team TWRP
Hello once again...I might need some help
I was following these steps but after flashing this TWRP I cant enter into the TWRP...so far Ive tried holding power button then pressing Volume +; holding power button and then holding Volume+; even holding them both but still without any result...any chance you might help me here, please?
*EDIT: Im flashing stock ROM
Go to the system then do
adb reboot recovery
I flashed TWRP recovery once again, then I went for "adb reboot recovery". This is what happened after I used "adb reboot recovery" (attached picture). There is no sign about TWRP. What am I doing wrong? I literally followed the guide the flash of the recovery TWRP is successful. Is there any chance that Im flashing wrong TWRP recovery? Or that Im doing it on stock ROM? Usually its problem between chair and keyboard but I dont know :-/.
So Ive tried to boot TWRP through after flashing it with "fastboot boot twrp.img". It went through but it booted like normal so I ended up in system like when you turn on your phone normally.
Anybody, anything please?
N00B92 said:
Anybody, anything please?
Click to expand...
Click to collapse
First: what version of miui?
If you're on miui 12.5 this method will cause reboot.
If your phone is < 12.0.X its okay.
It looks like flashing recovery worked.
Instead of trying to adb reboot recovery after flashing recovery try this:
- When it's done, Remove cable and Hold Power + Vol. Up when phone starts turning on leave the power button but keep pressing Vol. UP until TWRP splash Screen shows up.
Version of MIUI: MIUI Global 12.0.5; Stable 12.05.0(QGGEUXM)
Version of Android: 10 QP1A. 190711.020
Android Level of Security: 2021-04-01
I was already trying that, if I do it how you typed the screen is gonna keep blinking with MIUI logo.
I was looking for the answers and I found smth about "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img" to disable android verified boot, but dunno if its my case on stock ROM or not.
N00B92 said:
I was looking for the answers and I found smth about "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img" to disable android verified boot, but dunno if its my case on stock ROM or not.
Click to expand...
Click to collapse
First you need to enter recovery, i think you didn't flash boot.
Follow the method below exactly.
Original post and files can be found here.
If error occurs..
1. Go to Minimal ADB and Fastboot in C: of your PC. Open Fastboot folder and Press Shift+Right Click and Select Open Command Window Here at the CMD type fastboot devices and enter (check if it's recognized the device).
2. Enter the following commands: fastboot flash boot boot.img and Enter then fastboot flash recovery recovery.img and Enter. We have flashed clean boot and TWRP.
3. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. The recovery_fromboot.p file is already deleted earlier.
5. Go to Mount in TWRP check data, system, vendor, nvdata and now you can decrypt DATA by formatting in TWRP Wipe-Fotmat Data, write yes and swipe.
6. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. If Chinese language change to English. If TWRP will ask you the password (this means that there is DATA encryption)click on CANCEL and get to the main screen.
We go to the mount, put check on data, system, vendor, nvdata and MicroSD card (if the phone has a memory card).
Press home to return to the main screen Choose Advanced-File Manager item >system_root / system / folder at the bottom there is a recovery_fromboot.p file delete it.
Go back to Advanced and select Close AVB2.0 and flash the archive with a swipe to the right.
Again, we go along the Advanced-File Manager path in the root, look for the supersu folder in it, select the SuperSu_installer.zip fileand flash it with a swipe to the right. This is an archive from Magisk_19.4 it will patch boot. The firmware of this archive should go WITHOUT a single error, all lines should be white and at the end of DONE. If everything was done without errors in the TWRP select the Reboot-System. The first boot will be a little long and Don't Panic when boot up check the Magisk Manager>Settings>Update Settings>Stable Channel.
I dont have any boot.img in my folder so I cant flash the boot.img. Having stock ROM and I have no clue where to get it.
My current ROM is MIUI Global 12.0.5; Stable 12.05.0 (QGGEUXM) and I think I just found it here on this link:
https://xiaomifirmwareupdater.com/miui/begonia/stable/V12.0.5.0.QGGEUXM/
Can anybody experience confirm that Im suppose to copy out the boot.img out of it and then copy&paste it into Minimal ADB and Fastboot in C: of my PC and then going for the "fastboot flash boot boot.img" as the last msg from Donkyshot says?
Tyvm
Id appreciate any help
Everything I did try is above.
N00B92 said:
My current ROM is MIUI Global 12.0.5; Stable 12.05.0 (QGGEUXM) and I think I just found it here on this link:
https://xiaomifirmwareupdater.com/miui/begonia/stable/V12.0.5.0.QGGEUXM/
Can anybody experience confirm that Im suppose to copy out the boot.img out of it and then copy&paste it into Minimal ADB and Fastboot in C: of my PC and then going for the "fastboot flash boot boot.img" as the last msg from Donkyshot says?
Tyvm
Click to expand...
Click to collapse
madsponge26 said:
Redmi Note 8 Pro
[Begonia]
[Global Version Only]
WARNING: Before attempting to root your device, do note that by unlocking your bootloader and modifying your device with root, ROMs, etc... you are risking voiding your warranty! I am NOT responsible for what you do to your device either, so follow these instructions at your own risk. Make sure you know what you're doing, it's best to understand the process rather than just copy and paste commands and such.
Firmwares
Global Stable
V10.4.1.0.PGGMIXM
V10.4.2.0 to V11.0.10
V11.0.1.0 PGGMIXM
V11.0.3.0 PGGMIXM
V11.0.4.0 PGGMIXM
V11.0.6.0
China Stable
V10.4.4.0.PGGCNXM
V10.4.6.0.PGGCNXM
V10.4.8.0.PGGCNXM
V10.4.9.0.PGGCNXM
V10.4.10.0.PGGCNXM
V10.4.11.0.PGGCNXM
V11.0.1.0QGGCNXM
China Beta
V9.9.25
V9.10.17
India Stable
V10.4.3.0.PGGINXM
V11.0.1.0 PGGINXM
Europe (EEA)
V10.4.5.0.PGGEUXM
Indonesia
V10.4.2.0.PGGIDXM
V11.0.1.0PGGIDXM
Russia
V10.4.2.0.PGGRUXM
USB Drivers
Download
Unlock Bootloader
Enable OEM Unlocking
Unlock Here
Installing TWRP Recovery and ROOT
Enable USB Debugging - Goto Settings / Additional settings / Developer options / USB Debugging & USB debugging (Security settings) - Enable (If you have not activated Developer options, then Goto Settings / About phone / tap MIUI version 7 times - now developer options enabled.
Global Version
GLOBAL firmware V10.4.5.0.PGGEUXM only
Drivers installed properly
Enabled USB Debugging (enabled developers menu)
1. Turn Off
2. Go to Fastboot mode (Volume - + Power)
3. Connect to the PC
4. Download and extract in C drive, "Run as administrator" and execute "ifelixit+FLASHER+TOOLKIT+Begonia.bat".
5. Choose 1 (TWRP recovery) and enter or Choose 2 (Root Only)
Immediately disconnect the phone from the PC, otherwise it will go to reboot on command and the stock recovery will be restored.
6. Put the Minimal ADB and Fastboot in C: of your PC.
Transfer the Recovery.img in Fastboot folder
Open Fastboot folder and Press Shift+Right Click and Select Open Command Window Here at the CMD type fastboot devices and enter (check if it's recognized the device).
7. Type fastboot flash recovery recovery.img and enter (TWRP will be installed)
8. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. If Chinese language change to English. If TWRP will ask you the password (this means that there is DATA encryption)click on CANCEL and get to the main screen.
We go to the mount, put check on data, system, vendor, nvdata and MicroSD card (if the phone has a memory card).
Press home to return to the main screen Choose Advanced-File Manager item >system_root / system / folder at the bottom there is a recovery_fromboot.p file delete it.
Go back to Advanced and select Close AVB2.0 and flash the archive with a swipe to the right.
Again, we go along the Advanced-File Manager path in the root, look for the supersu folder in it, select the SuperSu_installer.zip fileand flash it with a swipe to the right. This is an archive from Magisk_19.4 it will patch boot. The firmware of this archive should go WITHOUT a single error, all lines should be white and at the end of DONE. If everything was done without errors in the TWRP select the Reboot-System. The first boot will be a little long and Don't Panic when boot up check the Magisk Manager>Settings>Update Settings>Stable Channel.
Stock boot IMG for V10.4.5.0.PGGEUXM just in case bootloop
TWRP for Begonia
If error occurs..
1. Go to Minimal ADB and Fastboot in C: of your PC. Open Fastboot folder and Press Shift+Right Click and Select Open Command Window Here at the CMD type fastboot devices and enter (check if it's recognized the device).
2. Enter the following commands: fastboot flash boot boot.img and Enter then fastboot flash recovery recovery.img and Enter. We have flashed clean boot and TWRP.
3. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. The recovery_fromboot.p file is already deleted earlier.
5. Go to Mount in TWRP check data, system, vendor, nvdata and now you can decrypt DATA by formatting in TWRP Wipe-Fotmat Data, write yes and swipe.
6. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. If Chinese language change to English. If TWRP will ask you the password (this means that there is DATA encryption)click on CANCEL and get to the main screen.
We go to the mount, put check on data, system, vendor, nvdata and MicroSD card (if the phone has a memory card).
Press home to return to the main screen Choose Advanced-File Manager item >system_root / system / folder at the bottom there is a recovery_fromboot.p file delete it.
Go back to Advanced and select Close AVB2.0 and flash the archive with a swipe to the right.
Again, we go along the Advanced-File Manager path in the root, look for the supersu folder in it, select the SuperSu_installer.zip fileand flash it with a swipe to the right. This is an archive from Magisk_19.4 it will patch boot. The firmware of this archive should go WITHOUT a single error, all lines should be white and at the end of DONE. If everything was done without errors in the TWRP select the Reboot-System. The first boot will be a little long and Don't Panic when boot up check the Magisk Manager>Settings>Update Settings>Stable Channel.
Proof of Video that Redmi Note 8 Pro Rooted
Contributors
Nikas
esleer
Xakep1993
SPIRITic
m3lbrunton
Lyelik74
@topjohnwu
TWRP Community
XDA Community
Xiaomi Community
Click to expand...
Click to collapse
Well look here.
This is the original post the person above put soooo
Yeah the boot.img is in there.
Kenora_I said:
Well look here.
This is the original post the person above put soooo
Yeah the boot.img is in there.
Click to expand...
Click to collapse
Thanks. I used the boot.img and I was following the guide which "donkyshot" sent. But I got stucked right after I did those commands in command Window. I disconnected the phone went for the power button hold and then when it was blank I stopped holding power button and I started holding the Volume+ button. The phone was bootlooped on Xiaomi logo...I was waiting several times but nothing. At the end I had to flash the phone with stock ROM I downloaded through MiFlash...I really dont know what I was doing wrong.
[All-in-One] Poco F5 / Redmi Note 12 Turbo (marble): Unlock Bootloader, Root, Flash TWRP, Flash ROM
Dear Poco F5 / Redmi Note 12 Turbo user,
I'm not responsible if anything happens to your device. If you execute these AiO procedures properly then you shouldn't face any problems. Before you proceed please back up all your important data and make sure that your phone battery is charged >80%!
A. Prerequisites:
1. Install ADB and Fastboot tools with drivers on Windows
How to do this please read here: https://forum.xda-developers.com/t/...vers-15-seconds-adb-installer-v1-4-3.2588979/
Restart your computer.
2. Enable "OEM unlocking" and "USB debugging" in your device
a. Enable Developer Options in: Settings/About Phone/MIUI version. Click on MIUI version 7 or 8 times
b. Now go to: Settings/Additional Settings/Developer Options and check "OEM unlocking" and "USB debugging"
3. Create a Mi Account
If you don’t have a Mi Account, then create one here: https://account.xiaomi.com
4. Connect your Mi Account to your device
Go to: Settings/Additional Settings/Developer Options/Mi Unlock status and check "Add account and device"
B: Unlock the Bootloader
Unlocking the bootloader will erase all your data! So please back up your data before you unlock the bootloader!
1. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
2. You must connect your Mi Account with your device as per point A.4.
3. Download Mi Unlock Tool here: https://en.miui.com/unlock/index.html
4. Enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer via USB cable (best would be the original cable)
5. Start the Mi Unlock Tool
6. Enter your eMail and your password of your Mi Account (the same account which you added to your device - Point A.4.)
7. Connect you device to your computer and start the unlock procedure
8. Follow the unlock tool instructions until the unlock procedure is finished
9. Reboot your device
C: Root Your MIUI ROM without TWRP
1. Your Bootloader must be unlocked (see Point B)
2. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
3. Download the fastboot ROM (the same ROM currently installed in your device) from here: https://xiaomifirmwareupdater.com/miui/marble/ and unzip it.
4. Open the file and extract the “boot.img” on to your computer.
5. Transfer the “boot.img” from your computer on to your device
6. Download the latest Magisk manager App from here: https://github.com/topjohnwu/Magisk and install it on to your device.
7. Open Magisk App and click install, and then "select and patch a file" (of course you select “boot.img”)
8. Transfer the patched boot.img file from your device’s download folder on to the “ADB and Fastboot” folder in your computer. In the computer rename the patched file into: “patched_boot.img”
9. Switch off your device. Now enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer
10. Go to “ADB and Fastboot” folder in your computer and open a command window inside that folder.
Enter the terminal command in command line: >>fastboot boot patched_boot.img<< and hit enter. Now the device will restart.
Attention your device is now only temporary rooted, so don’t restart your device just yet. Find Magisk app in your device, open it, click “install” and then check “direct install”, then press “let’s go”. Magisk will now install and make the root permanent. Now click “reboot” and the device will restart.
D: Install A Xiaomi.eu ROM
1. Your Bootloader must be unlocked (see Point B)
2. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
3. Download and put onto your computer the Xiaomi.eu ROM (please select marble) from here: https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv14/ and unzip it.
4. Switch off your device. Now enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer.
5. In your computer (in the Xiaomi.eu ROM folder) please click the file: “windows_fastboot_first_install_with_data_firmat.bat" (if you’re using windows, or press the proper file if you’re using mac or linux) and computer will do the rest. The device will restart.
E: Root Your Xiaomi.eu ROM without TWRP
1. Your Bootloader must be unlocked (see Point B)
2. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
3. Pls find in your computer the downloaded and unzipped hybrid Xiaomi.eu ROM from Point D.2.
4. Find the file “boot.img” and transfer it on to your device
5. Download the latest Magisk manager App from here: https://github.com/topjohnwu/Magisk and install it on to your device.
6. Open Magisk App and click install, and then "select and patch a file" (of course you select “boot.img”)
7. Transfer the patched “boot.img” file from your device’s download folder on to the “ADB and Fastboot” folder in your computer. In the computer rename the patched file into: “patched_boot.img”
8. Switch off your device. Now enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer
9. Go to “ADB and Fastboot” folder in your computer and open a command window inside that folder.
Enter the terminal command in command line: >>fastboot boot patched_boot.img<< and hit enter. Now the device will restart.
Attention your device is now only temporary rooted, so don’t restart your device just yet. Find Magisk app in your device, open it, click “install” and then check “direct install”, then click “let’s go”. Magisk will now install and make the root permanent. Now click “reboot” and the device will restart.
F: Install TWRP
To be updated once the official TWRP for this device is available.
G: Install A Custom ROM
To be updated once official custom ROMs (Lineage etc.) for this device are available.
H: Return To MIUI
1. I'm assuming your bootloader is unlocked
2. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
3. Download and put onto your computer the latest fastboot ROM from here: https://xiaomifirmwareupdater.com/miui/marble/ and unzip it.
4. Switch off your device. Now enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer.
5. In your computer (in the folder where you have put your ROM) please click the file:
a. “flash_all.bat" (if you want to make a clean install but keep the bootloader unlocked).
b. “flash_all_except_storage" (if you want to make a clean install but keep your data and maintain the bootloader unlocked).
c. “flash_all_lock" (if you want to make a clean install and lock the bootloader).
In all three cases (a., b., c.) when flashing is finished, restart your device.
If my guide helped you, please click "thanks" and enjoy your phone.
Frequently Asked Questions (FAQ):
1. Waiting time to unlock the bootloader
Q. If I receive the message: "unlocking can be done after 72h or 168h or 360h etc.". Is there a way to skip this waiting time?
A: Unfortunately you have to wait for that time to pass. There’s no way around it (that I know of). It seems like new and never used (to unlock bootloader) accounts receive a shorter waiting time.
2. Unlock procedure stops at 99%
Q: If my unlock procedure stops at 99%, what could be the problem?
A: Most problay you're using two different Xiaomi accounts. You have to use the same account that you have added into the device also in the unlock tool otherwise it will not work.
3. Recommended ad-blocker (for rooted devices)
Q: I want to block the advertisement in all apps, what app can you recommend?
A: If you decide to root your device, then you can install AdAway from here: https://adaway.org/. In order for AdAway to work properly please add in the Magisk App the Systemless Hosts (Magisk/Settings/Systemless Hosts).
4. Retaining the root after ROM update
Q: If I root my device as per point C, E of the AiO and I install a system update in my device, is the root still available?
A: Unfortunately root will be removed after the system update. So you have to repeat the procedure in point C, E.
senerex said:
[All-in-One] Poco F5 / Redmi Note 12 Turbo (marble): Unlock Bootloader, Root, Flash TWRP, Flash ROM
Dear Poco F5 / Redmi Note 12 Turbo user,
I'm not responsible if anything happens to your device. If you execute these AiO procedures properly then you shouldn't face any problems.
Before you proceed please back up all your important data and make sure that your phone battery is charged >80%!
A. Prerequisites:
1. Install ADB and Fastboot tools with drivers on Windows
How to do this please read here: https://forum.xda-developers.com/t/...vers-15-seconds-adb-installer-v1-4-3.2588979/
Restart your computer.
2. Enable "OEM unlocking" and "USB debugging" in your device
a. Enable Developer Options in: Settings/About Phone/MIUI version. Click on MIUI version 7 or 8 times
b. Now go to: Settings/Additional Settings/Developer Options and check "OEM unlocking" and "USB debugging"
3. Request Permission from Xiaomi to Unlock the Bootloader
a. If you don’t have an Mi Account, then create one here: https://account.xiaomi.com
b. Sign in to Xiaomi and apply for unlocking here: https://en.miui.com/unlock/index.html
4. Connect your Mi Account to your device
Go to: Settings/Additional Settings/Developer Options/Mi Unlock status and check "Add account and device"
B: Unlock the Bootloader
Unlocking the bootloader will erase all your data! So please back up your data before you unlock the bootloader!
1. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
2. You must connect your Mi Account with your device as per point A.5.
3. Download Mi Unlock Tool here: https://en.miui.com/unlock/index.html
4. Enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer via USB cable (best would be the original cable)
5. Start the Mi Unlock Tool
6. Enter your eMail and your password of your Mi Account (the same account which you added to your device - Point A.4.)
7. Connect you device to your computer and start the unlock procedure
8. Follow the unlock tool instructions until the unlock procedure is finished
9. Reboot your device
C: Root Your MIUI ROM without TWRP
1. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
2. Download the Recovery ROM (*zip file) (the same ROM currently installed in your device) from here: https://xiaomifirmwareupdater.com/miui/marble/
3. Open the file and extract the “boot.img” on to your computer.
4. Transfer the “boot.img” from your computer on to your device
5. Download the latest Magisk manager App from here: https://github.com/topjohnwu/Magisk and install it on to your device.
6. Open Magisk App and click install, and then "select and patch a file" (of course you select “boot.img”)
7. Transfer the patched boot.img file from your device’s download folder on to the “ADB and Fastboot” folder in your computer. In the computer rename the patched file into: “patched_boot.img”
8. Switch off your device. Now enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer
9. Go to “ADB and Fastboot” folder in your computer and open a command window inside that folder.
Enter the terminal command in command line: >>fastboot boot patched_boot.img<< and hit enter.
Now the device will restart. Attention your device is only temporary rooted, so don’t restart your device just yet. Find Magisk app in your device, open it, click “install” and then check “direct install”, then press “let’s go”. Magisk will now install and make the root permanent. Now click “reboot” and the device will restart.
D: Install A Xiaomi.eu ROM
1. Your Bootloader must be unlocked (see Point B)
2. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
3. Download and put onto your computer the Xiaomi.eu ROM (please select marble) from here: https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv14/ and unzip it.
4. Switch off your device. Now enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer.
5. In your computer (in the Xiaomi.eu ROM folder) please click the file: “windows_fastboot_first_install_with_data_firmat.bat" (if you’re using windows, or press the proper file if you’re using mac or linux) and computer will do the rest. The device will restart.
E: Root Your Xiaomi.eu ROM without TWRP
1. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
2. Pls find in your computer the downloaded and unzipped hybrid Xiaomi.eu ROM from Point D.2.
3. Find the file “boot.img” and transfer it on to your device
4. Download the latest Magisk manager App from here: https://github.com/topjohnwu/Magisk and install it on to your device.
5. Open Magisk App and click install, and then "select and patch a file" (of course you select “boot.img”)
6. Transfer the patched “boot.img” file from your device’s download folder on to the “ADB and Fastboot” folder in your computer. In the computer rename the patched file into: “patched_boot.img”
7. Switch off your device. Now enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer
8. Go to “ADB and Fastboot” folder in your computer and open a command window inside that folder.
Enter the terminal command in command line: >>fastboot boot patched_boot.img<< and hit enter.
Now the device will restart. Attention your device is only temporary rooted, so don’t restart your device just yet. Find Magisk app in your device, open it, click “install” and then check “direct install”, then click “let’s go”. Magisk will now install and make the root permanent. Now click “reboot” and the device will restart.
F: Install TWRP
To be updated once the official TWRP for this device is available.
E. Install A Custom ROM
To be updated once official custom ROMs (Lineage etc.) for this device are available.
F. Returning To MIUI
To be updated.
If my guide helped you, please click "thanks" and enjoy your phone.
Click to expand...
Click to collapse
i have two questions base on poco F5
1- what differents between miui rom and xiaomi.eu rom ?
2- basically poco F5 based on miui rom right ?so if wanna root withou twrp recovery as point C above, need to unlocked bootloader first ?cause on the point C , is not mention to unlocked bootloader
thanks
Ayiepz said:
i have two questions base on poco F5
1- what differents between miui rom and xiaomi.eu rom ?
2- basically poco F5 based on miui rom right ?so if wanna root withou twrp recovery as point C above, need to unlocked bootloader first ?cause on the point C , is not mention to unlocked bootloader
Click to expand...
Click to collapse
0. Please don't quote the entire Post no 1 because this thread becomes too long.
1. I'd recommend to go to Xiaomi.eu, first page, they explained very well the differences between MIUI and Xiaomi.eu.
2. Without unlocked bootloader you can't make any system modifications. That's why i started the thread with "unlock the bootloader" (Point B). Ok, i updated Point C.
uduro said:
Hello, I have a bit of a problem. I did as here View attachment 5912923
View attachment 5912919
And I can't move on. Please help
I installed the drivers. I enabled fastboot on my phone and I can't click this UNLOCK button
Click to expand...
Click to collapse
Answer to your update:
You have to use the same account that you have added into the device also in the unlock tool otherwise it will not work.
i got problem with poco F5 driver seems like in command adb devices
my device not unauthorized even i revoke , restart anything
senerex said:
[All-in-One] Poco F5 / Redmi Note 12 Turbo (marble): Unlock Bootloader, Root, Flash TWRP, Flash ROM
Dear Poco F5 / Redmi Note 12 Turbo user,
I'm not responsible if anything happens to your device. If you execute these AiO procedures properly then you shouldn't face any problems.
Before you proceed please back up all your important data and make sure that your phone battery is charged >80%!
A. Prerequisites:
1. Install ADB and Fastboot tools with drivers on Windows
How to do this please read here: https://forum.xda-developers.com/t/...vers-15-seconds-adb-installer-v1-4-3.2588979/
Restart your computer.
2. Enable "OEM unlocking" and "USB debugging" in your device
a. Enable Developer Options in: Settings/About Phone/MIUI version. Click on MIUI version 7 or 8 times
b. Now go to: Settings/Additional Settings/Developer Options and check "OEM unlocking" and "USB debugging"
3. Request Permission from Xiaomi to Unlock the Bootloader
a. If you don’t have an Mi Account, then create one here: https://account.xiaomi.com
b. Sign in to Xiaomi and apply for unlocking here: https://en.miui.com/unlock/index.html
4. Connect your Mi Account to your device
Go to: Settings/Additional Settings/Developer Options/Mi Unlock status and check "Add account and device"
B: Unlock the Bootloader
Unlocking the bootloader will erase all your data! So please back up your data before you unlock the bootloader!
1. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
2. You must connect your Mi Account with your device as per point A.5.
3. Download Mi Unlock Tool here: https://en.miui.com/unlock/index.html
4. Enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer via USB cable (best would be the original cable)
5. Start the Mi Unlock Tool
6. Enter your eMail and your password of your Mi Account (the same account which you added to your device - Point A.4.)
7. Connect you device to your computer and start the unlock procedure
8. Follow the unlock tool instructions until the unlock procedure is finished
9. Reboot your device
C: Root Your MIUI ROM without TWRP
1. Your Bootloader must be unlocked (see Point B)
2. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
3. Download the Recovery ROM (*zip file) (the same ROM currently installed in your device) from here: https://xiaomifirmwareupdater.com/miui/marble/
4. Open the file and extract the “boot.img” on to your computer.
5. Transfer the “boot.img” from your computer on to your device
6. Download the latest Magisk manager App from here: https://github.com/topjohnwu/Magisk and install it on to your device.
7. Open Magisk App and click install, and then "select and patch a file" (of course you select “boot.img”)
8. Transfer the patched boot.img file from your device’s download folder on to the “ADB and Fastboot” folder in your computer. In the computer rename the patched file into: “patched_boot.img”
9. Switch off your device. Now enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer
10. Go to “ADB and Fastboot” folder in your computer and open a command window inside that folder.
Enter the terminal command in command line: >>fastboot boot patched_boot.img<< and hit enter.
Now the device will restart. Attention your device is only temporary rooted, so don’t restart your device just yet. Find Magisk app in your device, open it, click “install” and then check “direct install”, then press “let’s go”. Magisk will now install and make the root permanent. Now click “reboot” and the device will restart.
D: Install A Xiaomi.eu ROM
1. Your Bootloader must be unlocked (see Point B)
2. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
3. Download and put onto your computer the Xiaomi.eu ROM (please select marble) from here: https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv14/ and unzip it.
4. Switch off your device. Now enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer.
5. In your computer (in the Xiaomi.eu ROM folder) please click the file: “windows_fastboot_first_install_with_data_firmat.bat" (if you’re using windows, or press the proper file if you’re using mac or linux) and computer will do the rest. The device will restart.
E: Root Your Xiaomi.eu ROM without TWRP
1. Your Bootloader must be unlocked (see Point B)
2. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
3. Pls find in your computer the downloaded and unzipped hybrid Xiaomi.eu ROM from Point D.2.
4. Find the file “boot.img” and transfer it on to your device
5. Download the latest Magisk manager App from here: https://github.com/topjohnwu/Magisk and install it on to your device.
6. Open Magisk App and click install, and then "select and patch a file" (of course you select “boot.img”)
7. Transfer the patched “boot.img” file from your device’s download folder on to the “ADB and Fastboot” folder in your computer. In the computer rename the patched file into: “patched_boot.img”
8. Switch off your device. Now enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer
9. Go to “ADB and Fastboot” folder in your computer and open a command window inside that folder.
Enter the terminal command in command line: >>fastboot boot patched_boot.img<< and hit enter.
Now the device will restart. Attention your device is only temporary rooted, so don’t restart your device just yet. Find Magisk app in your device, open it, click “install” and then check “direct install”, then click “let’s go”. Magisk will now install and make the root permanent. Now click “reboot” and the device will restart.
F: Install TWRP
To be updated once the official TWRP for this device is available.
E. Install A Custom ROM
To be updated once official custom ROMs (Lineage etc.) for this device are available.
F. Returning To MIUI
To be updated.
If my guide helped you, please click "thanks" and enjoy your phone.
Click to expand...
Click to collapse
Please senerex ask skkk to please release twrp encryption/decryption for poco F5 (marble) asap..Thanks a lot...and orangefox will also works....please give me official handle of skkk aur any other twrp developer....thanks a lot man.
maroofrehman said:
Please senerex ask skkk to please release twrp encryption/decryption for poco F5 (marble) asap..Thanks a lot...and orangefox will also works....please give me official handle of skkk aur any other twrp developer....thanks a lot man.
Click to expand...
Click to collapse
Hi. Can you provide a link to ofox recovery?
Hello.
Thank you for sharing your knowledge.
I have done everything you indicated. I am able to click on the UNLOCK button, and it starts the process. Still, when it reaches 99%, it stops and gives me an error message: "Please add your account in MIUI's Settings > Developer options > Mi Unlock status", I did it and the phone showed me that the account was added successfully, but when I retry, it shows the same message again.
Any clue?
Thanks again.
angelomana said:
Hello.
Thank you for sharing your knowledge.
I have done everything you indicated. I am able to click on the UNLOCK button, and it starts the process. Still, when it reaches 99%, it stops and gives me an error message: "Please add your account in MIUI's Settings > Developer options > Mi Unlock status", I did it and the phone showed me that the account was added successfully, but when I retry, it shows the same message again.
Any clue?
Thanks again.
Click to expand...
Click to collapse
Are you using the latest version of the app ? it is - 6.6.510.37 ... check if that is the case.
(as of 25th May 2023)
Hello. Thank you for your reply.
Yes, I am using the latest version of the app.
I bought this phone (Redmi Note 12 Turbo) in Mainland China, but I do not live there. I just want to install the Global ROM, so I can make the most of the phone in my country and besides I do not need the Chinese apps that come installed.
It seems like the phone does not really get added to my Xiaomi account.
I tried another app to unlock the bootloader, but no success either.
angelomana said:
Hello. Thank you for your reply.
Yes, I am using the latest version of the app.
I bought this phone (Redmi Note 12 Turbo) in Mainland China, but I do not live there. I just want to install the Global ROM, so I can make the most of the phone in my country and besides I do not need the Chinese apps that come installed.
It seems like the phone does not really get added to my Xiaomi account.
I tried another app to unlock the bootloader, but no success either.
Click to expand...
Click to collapse
You have to use the same account that you have added into the device also in the unlock tool otherwise it will not work. See also point B.6. in Post #1.
Since this question is made by more users, I just updated Post #2, Frequently Asked Questions (FAQ), answering this question as well.
Thank you for your reply.
Yes, I am using the same account in both, the unlock tool and the phone. Actually, the process begins normally and reaches 99%, but then does not work. I am using Windows 11.
I feel the pone slower after unlock bootloader and install lastest stable eu rom, anyone with the same result?
Can anyone tell me what is the code and version of the original rom come with it?
Thanks in advance
angelomana said:
Thank you for your reply.
Yes, I am using the same account in both, the unlock tool and the phone. Actually, the process begins normally and reaches 99%, but then does not work. I am using Windows 11.
Click to expand...
Click to collapse
u can try factory resetting the phone and trying again.
NOTE :- You need to turn off wifi and have a sim with data enabled. (I will suggest you create a new account and use your moblie number as login NOT email). If it still doesn't work maybe contact Xiaomi .
nelo360 said:
I feel the pone slower after unlock bootloader and install lastest stable eu rom, anyone with the same result?
Can anyone tell me what is the code and version of the original rom come with it?
Thanks in advance
Click to expand...
Click to collapse
Nope, faster on my end. I've also pretty heavily debloated the Eu ROM.
alb3rtt said:
Nope, faster on my end. I've also pretty heavily debloated the Eu ROM.
Click to expand...
Click to collapse
Can ypu share your debloat?
Installed eu via twrp or fastboot?
Thanks
Zotac101 said:
u can try factory resetting the phone and trying again.
NOTE :- You need to turn off wifi and have a sim with data enabled. (I will suggest you create a new account and use your moblie number as login NOT email). If it still doesn't work maybe contact Xiaomi .
Click to expand...
Click to collapse
Thank you. I will try that.
nelo360 said:
Can ypu share your debloat?
Installed eu via twrp or fastboot?
Thanks
Click to expand...
Click to collapse
I installed via fastboot.
I use universal android debloater (https://github.com/0x192/universal-android-debloater) to debloat - all apps listed are uninstalled.
I use Opencalc from F-Droid to replace MIUI Calculator and Simple notes to replace MIUI Notes.
I would highly suggest you check what I have disabled since you may use some of the apps removed.
Make sure you are not logged into your Xiaomi account when you debloat, as I have uninstalled it and doing so while logged in will cause a bootloop.
Debloat list:
com.android.calendar
com.android.deskclock
com.android.email
com.android.fileexplorer
com.android.hotwordenrollment.okgoogle
com.android.hotwordenrollment.xgoogle
com.android.soundrecorder
com.android.traceur
com.android.updater
com.bsp.catchlog
com.google.android.feedback
com.google.android.gms.location.history
com.google.android.packageinstaller
com.mi.globalbrowser
com.mi.health
com.milink.service
com.miui.backup
com.miui.bugreport
com.miui.calculator
com.miui.cleaner
com.miui.cloudbackup
com.miui.cloudservice
com.miui.compass
com.miui.contentcatcher
com.miui.daemon
com.miui.huanji
com.miui.micloudsync
com.miui.mishare.connectivity
com.miui.newmidrive
com.miui.notes
com.miui.personalassistant
com.miui.phrase
com.miui.player
com.miui.qr
com.miui.screenrecorder
com.miui.touchassistant
com.miui.videoplayer
com.miui.vsimcore
com.miui.weather2
com.qualcomm.atfwd
com.qualcomm.qti.autoregistration
com.quicinc.voice.activation
com.tencent.soter.soterserver
com.wapi.wapicertmanage
com.xiaomi.account
com.xiaomi.joyose
com.xiaomi.macro
com.xiaomi.mi_connect_service
com.xiaomi.micloud.sdk
com.xiaomi.payment
com.xiaomi.scanner
com.xiaomi.simactivate.service
com.xiaomi.xmsf
com.xiaomi.xmsfkeeper
org.ifaa.aidl.manager