Is it possible to flash the Unlocked firmware G925W8VLU6DRF1 on this phone the 925 tmobile? Would it mess up the modems or anything?
Related
Hey guys,
I got my S4 unlocked from Tmobile. But I want to flash the latest Kitkat firmware via Odin. Will my phone relock back to Tmobile?
Thanks,
Nope
I just bought an AT&T S3 to replace a carrier unlocked T-Mobile S3. The new device is already rooted with CM11 installed and it's baseband is MG2. I'll need to revert back to stock temporarily to do a carrier unlock. Here are my questions:
What is a safe TW (preferrably a pre-rooted TW) I can flash to perform the carrier unlock?
After I'm carrier unlocked, what is the latest modem I can install? I want to do all of this without enabling knox.
Thanks to all in advance,
Niphoet
Flashing back to stock means everything will be wiped on the phone, including recovery and data.
You can use Odin to flash the stock ATT 4.1.1 firmware from sammobile.com. Before doing so, boot into download mode and make sure you there is nothing about warranty bit on the screen.
niphoet said:
After I'm carrier unlocked, what is the latest modem I can install? I want to do all of this without enabling knox.
Thanks to all in advance,
Niphoet
Click to expand...
Click to collapse
There ae several important things to know about upgrading your modem and firmware.
1) KNOX comes with all of the firmware since the officlal 4.3 release, MJB. The leaked version of the 4.3 release (MJ2) does not have KNOX.
2) Once on the MJB and later firmware you can no longer downgrade, you will most probably brick your phone.
3) It is possible to run the MJ2 firmware/bootloader and MJB modem combination on 4.3 and 4.4.x ROMs.
4) The MJ2 and MJB bootloader will most likely require a custom kernel if you use it on 4.4.x ROMs. Something like the kToonez kernel or iBuddler kernel found in Likewise.
5) Once you get past the 4.3 firmware do not mix firmware and modem release versions, again bricks are probably. If you have NE4 firmare, use the NE4 modem. The same goes for for if you have the NE4 modem, use the NE4 bootloader. This holds true for NH2, NJ1, and NKx.
6) The only time I have seen that you absolutely must be on NE4 or newer is for the Lollipop ROMs.
Hi guys I need some information regarding to How to root, flash Custom ROMS, flash various Recoveries and if I want to revert back to full stock ROM whenever I want to how will I do it?
My device model is SGH-I747M (Rogers Carrier) and I've updated it to the latest OTA update 4.4 KitKat
I've seen may threads regarding to the SGH-I747 but all are for AT&T carrier but not any single for the Rogers carrier why?
Do you have any warranty left on your phone? Flashing a custom recovery will trip the warranty counter and change it from 0 to 1.
audit13 said:
Do you have any warranty left on your phone? Flashing a custom recovery will trip the warranty counter and change it from 0 to 1.
Click to expand...
Click to collapse
I haven't rooted/flashed nothing on my phone yet. All I'm just asking the question bro and yea I don't have any warranty for it
The easiest way to root, in my opinion, is to flash a custom recovery in Odin. After flashing a custom recovery, boot into recovery, flash supersu, boot the phone, allow supersu to update and disable knox. Then boot back into recovery, create a nandroid backup, and flash a custom ROM for the d2lte.
To flash back to stock, you can restore your nandroid backup or flash a stock ROM from sammobile.com. Just make sure to match the sammobile.com ROM with your bootloader.
The big difference between the i747 (AT&T) and the i747M (various Canadian carriers) is the bootloader and modem. They are NOT interchangeable between the i747 and the i747M. I haven't seen any of the custom ROMs for these SGS3s that flash bootloader and modem. Therefore any of the custom ROMS for the i747 will work with the i747M. Custom TouchWiz based ROMs are safe to use.
If the instructions for installing a ROM say that you must be on the NE4 or NJ1 bootloader and modem, the equivalent for the Rogers i747M are (NDx?), NF2, and NKx. From your original post I believe you are on the NKx bootloader and modem pair. This is good for any of the Kitkat and Lollipop ROMs. The only catch is that the updater-scripts for some of the older KK ROMs may not recognize the newest bootloader and modems. The ROMs are still good, it just takes a bit of work to get them installed. The same extra work would actually allow you to run a JellyBean (4.3) ROM.
Stock ROMs, those designed to return your device to factory condition (+/- root and +/- custom recovery), require much more care.
If you ever need to return to stock for your i747M, DO NOT flash a ROM that will down grade your modem and bootloader. Downgrading the bootloader and modem once you are at, or past, the 4.3.x versions will brick the i747 and I have read it will do the same for the i747M. If you can not find a stock ROM in the forums for the i747M you can find them at sammobile.com.
There are some stock ROMs available in the forums that include the AT&T bootloader and modem. DO NOT flash/install any of these.
There are stock ROMs for the i747 in the forum that do not contain bootloader and modem. These are safe for you, but BE CAREFUL. You do not want to mistakenly try to install one that does have the bootloader and modem
Also, do not flash a modem that does not match your bootloader in version number. This did not matter prior to the 4.3 bootloader and modem, it has ever since.
What if i used regionlock app to unlock my phone (i had to root flash 4.2.2 modem and use regionlock app then flash back to 4.4.2 modem to do this) can i still update to latest firmware or flash roms and modems and will i still be able to keep my phone unlocked?
Once the phone is sim unlocked, it will remain unlocked after flashing modems, bootloader, and ROMs.
My GF's M919V is rooted and is currently running Resurrection Remix, which has been flawless. I'd like to SIM unlock this phone but the usual service menu codes mentioned here do nothing. Is it safe to downgrade to 4.4.2 to do the SIM unlock?
The service menu unlock method only works with the stock Samsung dialler in 4.1.1. If the phone is running a 4.4.2 bootloader, you can't downgrade to 4..1.1. You may be able to unlock the phone using the regionlockaway app on a rooted stock rom and older modem.
This thread may help: http://forum.xda-developers.com/showthread.php?t=2780006
If the 919 s4 is like the i337m s4, you may be able to flash a stock ROM, flash a 4.2.2 modem, root, run regionlockaway, flash original modem, and phone will be unlocked.
As an alternative, you could flash back to a stock rom and buy an unlock code.