I don't want to go to custom rom on S9 anymore a lot of functions do not work.
But i already did the OEM unlock so now on the Download mode it say "OEM lock: off".
How to put that to original state which is on?
parnunu said:
I don't want to go to custom rom on S9 anymore a lot of functions do not work.
But i already did the OEM unlock so now on the Download mode it say "OEM lock: off".
How to put that to original state which is on?
Click to expand...
Click to collapse
Flash stock again
*Detection* said:
Flash stock again
Click to expand...
Click to collapse
Not work, I flashed all the file from stock firmware.
The OEM lock still off.
parnunu said:
Not work, I flashed all the file from stock firmware.
The OEM lock still off.
Click to expand...
Click to collapse
Make sure you flashed CSC and not HOME_CSC
Factory Reset
*Detection* said:
Make sure you flashed CSC and not HOME_CSC
Factory Reset
Click to expand...
Click to collapse
Yes I flashed CSC not the HOME_CSC.
I download the firmware from updato.com, is it OFFICIAL? Anyway I can do firmware upgrade.
parnunu said:
Yes I flashed CSC not the HOME_CSC.
I download the firmware from updato.com, is it OFFICIAL? Anyway I can do firmware upgrade.
Click to expand...
Click to collapse
Yes it is official
Are you sure it says OEM lock off, and not OEM Unlock off?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It look like this.
parnunu said:
It look like this.
Click to expand...
Click to collapse
No idea, shouldn't affect anything though, just means the bootloader is unlocked, as long as you don't flash anything custom OTAs will work etc
Related
My M8 is bootloader unlocked and S-OFF
Now i want to remove the "TAMPERED" flag in bootloader. How to do that?
Is it possible to "lock" the bootloader again? If the phone is "locked" but still S-OFF, is it possible to flash rom, recovery, firmware etc. ?
What if i want to get S-ON again? How to do that?
i succesfully removed the "TAMPERED" flag.
But what about locking the bootloader?
MICH_** said:
i succesfully removed the "TAMPERED" flag.
But what about locking the bootloader?
Click to expand...
Click to collapse
Follow the guide in General
EddyOS said:
Follow the guide in General
Click to expand...
Click to collapse
Is it still possible to flash rom, recovery, firmware etc. with a "locked" bootloader? Can i get back to s-on with a locked bootloader?
MICH_** said:
Is it still possible to flash rom, recovery, firmware etc. with a "locked" bootloader? Can i get back to s-on with a locked bootloader?
Click to expand...
Click to collapse
1. No, you need to be unlocked to use a custom recovery
2. Yes, but you don't ever have to go back to S-ON anyway
EddyOS said:
1. No, you need to be unlocked to use a custom recovery
Click to expand...
Click to collapse
Are you sure? If my phone is S-OFF and the bootloader is locked?
MICH_** said:
Are you sure? If my phone is S-OFF and the bootloader is locked?
Click to expand...
Click to collapse
Yes, as if it's locked you can't flash a custom recovery (well, there is a way but it's a ball ache to do)
EddyOS said:
Yes, as if it's locked you can't flash a custom recovery (well, there is a way but it's a ball ache to do)
Click to expand...
Click to collapse
ok, thank you
i found this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Phone always greets me with this pixelloided screen.
Its becoming an issue slowly.
Whenever I press the power button i get this screen. It persists for a while and goes off by itself.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
meher777 said:
Phone always greets me with this pixelloided screen.
Its becoming an issue slowly.
Whenever I press the power button i get this screen. It persists for a while and goes off by itself.
Click to expand...
Click to collapse
These are the screen snaps
hemanth.k said:
These are the screen snaps
Click to expand...
Click to collapse
do you have a custom rom?
Mr bubbles said:
do you have a custom rom?
Click to expand...
Click to collapse
No
hemanth.k said:
No
Click to expand...
Click to collapse
odd then that usual happens on custom roms you might need to re flash stock rom then.
Mr bubbles said:
odd then that usual happens on custom roms you might need to re flash stock rom then.
Click to expand...
Click to collapse
How to do that without unlocking BL?
hemanth.k said:
How to do that without unlocking BL?
Click to expand...
Click to collapse
Not that I'm aware of, you might want to try a Factory Data Reset first. After doing the appropriate backups first of course.
If that fails, unlock the BL, flash stock. Once you verify it works lock the BL again. You might have to FDR again to get the Play Store to show Certified if clearing data under Apps doesn't work.
I wish I could still trust my Robin, but I have a battery heating issue that nothing seems to fix. Hence my signature showing my former backup phone as my DD.
Sent from my ZTE B2017G using XDA Labs
So I have an AT&T unlocked Note 10+ with android 9. I wanted to update to android 10 via Odin because I'm not getting the OTA update. What I want to know is what firmware should I download at sammobile so that my phone doesn't get locked ?
enter model # and your csc
Tediberdyna said:
What I want to know is what firmware should I download at sammobile so that my phone doesn't get locked ?
Click to expand...
Click to collapse
JSYK Your phone will not get sim/network locked if your phone is already sim/network unlocked.
(if by locked your referring to the sim/network lock)
oneandroidnut said:
enter model # and your csc
Click to expand...
Click to collapse
where to check ?
scottusa2008 said:
JSYK Your phone will not get sim/network locked if your phone is already sim/network unlocked.
(if by locked your referring to the sim/network lock)
Click to expand...
Click to collapse
So if I flash tmobile firmware then it wont sim network lock my phone right ?
Tediberdyna said:
So if I flash tmobile firmware then it wont sim network lock my phone right ?
Click to expand...
Click to collapse
Your phone will not get sim/network locked if your phone is already sim/network unlocked
Tediberdyna said:
where to check ?
Click to expand...
Click to collapse
Settings then software information.... Here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N975U1 using Tapatalk
oneandroidnut said:
Settings then software information.... HereView attachment 4917267
Sent from my SM-N975U1 using Tapatalk
Click to expand...
Click to collapse
it says ATT/ATT/ATT.
Tediberdyna said:
it says ATT/ATT/ATT.
Click to expand...
Click to collapse
above that like where mine says OYZ what does it say?
oneandroidnut said:
above that like where mine says OYZ what does it say?
Click to expand...
Click to collapse
OYN
Hi all,
After flashing my GWA2 (SM-R830) following this guide to change my CSC, there's now Green Writing on my Watch whenever I boot the watch. In addition to that, OTA Updates are now failing.
A person in that post has the same issue as I had and fixed it by flashing stock firmware but that doesn't seem to fix it. I'm back to BTA1 and the green writing still persists as well as OTA still failing. The watch is fully working, except for OTA and said writing.
Anyone got a lead on why that is and possibly how to resolve it?
Edit: Solved it by reflashing it and leaving "Auto Reboot" ticked.
Image of the writing:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Engineer Bootloader... sboot.bin from Combination Firmware...
This is what you see...
Rollback Prevention crap...
Later more...
Best Regards
adfree said:
Engineer Bootloader... sboot.bin from Combination Firmware...
This is what you see...
Rollback Prevention crap...
Later more...
Best Regards
Click to expand...
Click to collapse
Is that reversible? or am I just stuck with non-working OTA?
Saxithon said:
Is that reversible? or am I just stuck with non-working OTA?
Click to expand...
Click to collapse
Yes it's reversible. Flash this firmware using NetOdin https://drive.google.com/open?id=1ZaoBm2hFXT2QTeZxrS8j4sqqgVyp6Iqo . After that, use Galaxy Wearable to update Tizen to the latest version.
I have exactly the same problem with an Active 2. Can someone point me in a direction toward Firmware to re-flash an 820 too please? (is this just leftover from the combination firmware I used during a region change?)
omocom said:
I have exactly the same problem with an Active 2. Can someone point me in a direction toward Firmware to re-flash an 820 too please? (is this just leftover from the combination firmware I used during a region change?)
Click to expand...
Click to collapse
I simply reflashed the 3-multi files and kept the "Auto Reboot" in netodin ticked.
My bootloarder it is giving error oem lock but i have it activated.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Vibnz said:
My bootloarder it is giving error oem lock but i have it activated.View attachment 5847155
Click to expand...
Click to collapse
What command are you using and what error are you getting?
I'm just trying to download custom rom
Vibnz said:
I'm just trying to download custom rom
Click to expand...
Click to collapse
Can you send a screenshot of the command + error?
I don't have screenshot but the error is Custom binary(recovery) by OEM lock
Vibnz said:
I don't have screenshot but the error is Custom binary(recovery) by OEM lock
Click to expand...
Click to collapse
Did you hold volume up to unlock the bootloader? Look at this picture. Note that it will format your device.
mine s10 doesn't even show up
Vibnz said:
mine doesn't even show up
Click to expand...
Click to collapse
What doesn't show up? The bootloader screen or the option to unlock it?
the option to unlock it
Vibnz said:
the option to unlock it
Click to expand...
Click to collapse
I don't know then, try disabling OEM unlock, rebooting, enabling OEM unlock again and rebooting again.
I already tried several times
Vibnz said:
I already tried several times
Click to expand...
Click to collapse
Can you enter download mode? If you can, try to install the latest stock firmware. Install it with ODIN.
I already tried but I don't know if it has to be one firmware from different specific countries
Vibnz said:
I already tried but I don't know if it has to be one firmware from different specific countries
Click to expand...
Click to collapse
It is best to try from the country or region where you live. You can download firmware from here:
Samsung Firmware Download - Lastest official firmware update
Samsung Firmware Download ⭐ Official and fast update ⭐ Lastest and old version ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
You use name your phone and select firmware which you want.