Hey there,
I'm currently running a OP3 with the OmniDragon 8.1 ROM and previously the ResurrectionRemix ROM. However, I do not believe this issue to be a ROM issue so that's why I'm posting here instead.
I've recently been having some issues with bluetooth and was hoping someone could help. I can connect my phone to my cars handsfree system perfectly fine and it works correctly. I can play music via Spotify and any other music player fine.
However, as soon as I make or receive a phone call I'm left where the person can't hear me, and I can't hear them. I can't even hear the ringing tone when phoning someone. However, as soon as I turn it from bluetooth back to the phone or just regular speaker, it works fine.
This previously was not the case when I was running Nougat.
But as soon as I upgraded to 8.1 this issue started happening.
I don't think it has anything to do with the ROM and is actually something to do with perhaps OP3 Firmware/Modem or something similar.
Car hands free works fine with other phones like an iPhone, so that's out of the question.
I've attached a catlog to this post from when this issue was happening in the car, so hopefully someone can narrow it down for me.
Any help is appreciated!
Actually many roms have been having issues with BT calls. It's due to some of the changes in the telephony package.
Hello, did you manage to find any Oreo rom that fixed this issue for you? Would appreciate any tips.
I too have had similar issues with Oreo and OnePlus 3. Using an handsfree Jabra Freeway and the microphone often does not work when I answer or phone someone during a drive. Which is extremely annoying and dangerous.
I had hopes that with the release of some alpha Android Pie roms, these BT issues would be fixed. But the issue seem to persist, at least for my device.
My only fix was to go back to nougat. The most stable rom i've found is the unofficial lineage 14.1 by sultan. This have been my daily driver for awhile now and seems to work fine.
Related
Hello.
I have installed Cyanogenmod 11 on my HOX.
although everything looks to be working fine, I still have issues with my Bluetooth.
When driving in my car, and want to place a call, I used to be able to use Cyberon Voice Commander to place the call.
It still works when i use it on my phone without Bluetooth, but when I am connected to my car everything stays silent.
It worked with stock firmware, and I can recieve calls using bluetooth, and I also can use the car stereo to play music from my phone,
but just making a call with the Voice commander does not work.
Does anyone have similar experiences with this, or does anyone have a solution?
Search the thread, been mentioned a lot there !
Hello,
I have been searching, and also looked in the thread for the HTC (HTC One X CyanogenMod 11.0 nightlies, http://http://forum.xda-developers.com/showthread.php?t=2583037) but I could not find an issue which is matching my problem.
Unfortunately I am (yet) not able to post this issue in the HTC One Cyagenomod thread...
I don't own a BT headset so I can't properly debug the issue. I know that a lot of people complain about it but there is not much I can do unless they actively try to help. You could provide logs when pairing the device, turning it on and when doing a call.
I might by a BT headset in the future. So there is hope .
Hello,
I was not sure which logfiles you wanted, so I grabbed the output from dmegs and made a logcat and put it in a zip fie.
Here they are.
Thanks for your effort, though.
Thanks for the logs.
Can you describe the behaviour a bit more? What exactly does not work? Imitating the call through Bluetooth, hearing your partner through Bluetooth or recording through Bluetooth. And can you test other apps for me. Like Skype or the normal phone without cyberon.
Do you know if your car is recognized as a normal handsfree Bluetooth device or something special? If you happen to know it.
Also some apps (like Google Now) need to be told to use BT devices.
Hello,
Bluetooth itself is working normally, I can use it to play music on my car's stereo, and when I recieve a call it works fine, I can hear the other party, and they can hear me.
It's just when I want to make a call, I can see Cyberon Voice commander starting up, but I don't hear any sound, and it also does not respond on voice commands.
When I disable Bluetooth, the app works normal.
On stock HTC rom, the app also works fine.
I own a Ford Focus 2011, and it shows up in bluetooth as Ford Audio.
The profiles active are audio for telephone and audio for media (sorry, translated from dutch).
The default Voice Dialer at least I can hear on my headset, haven't tried in the car yet with this version of Cyanogenmod.
It does not seem to respond to the micophone though.
The previous version of Cyagenomod would also not play over my car speakers.
Will try again when I get back home, did not use my car today.
Please test tomorrows nightly. I fixed some issues and I think they address your problems.
Try this Kernel http://forum.xda-developers.com/showthread.php?t=2586808 On the latest Version is a fix for BT maybe it helps
Hello,
just tried to test the "Voice dialer" through my car stereo, I can hardly hear it, and it does not recognize anything I say.
At least not in a way it would be useful for me
With tomorrows version you mean CM-11-20140314-Nightly, or the one after that?
Could not see anything about Bluetooth in the changelog, but I'll wait for the next version.
Will report back.
charly_s said:
Hello,
just tried to test the "Voice dialer" through my car stereo, I can hardly hear it, and it does not recognize anything I say.
At least not in a way it would be useful for me
Click to expand...
Click to collapse
With the other kernel? You probably already had the BT fix when using the CM kernel.
charly_s said:
With tomorrows version you mean CM-11-20140314-Nightly, or the one after that?
Could not see anything about Bluetooth in the changelog, but I'll wait for the next version.
Will report back.
Click to expand...
Click to collapse
Yes, 20140314, see line 6.
http://www.cmxlog.com/11/endeavoru#cm-11-20140314-NIGHTLY-endeavoru.zip
Hello,
I tested it with yesterday Nighties, and it's working now.
Cyberon Voice Commander could now be used with the Car bluetooth set.
Thank you for solving this.
I hope the logs I uploaded were of any use.
btw, I did take a look at the change log, and the line "tegra3-common: system/audio.h: Use correct DEVICE_BIT_IN bits" didn't ring any bells in my head in combination with Bluetooth.
Anyway, it is solved for me (and maybe for several others as well), so I want to express my gratitude by saying: Thank you very much:highfive:.
Hello All,
I have had a strange problem with bluetooth calling on my phone that has popped up in the last few weeks. If I attempt to make or receive a call using any sort of bluetooth headset, or the hands free radio in my car, I am unable to hear the other person, but they can hear me. This issue only is related to calls. I can use my phone for streaming bluetooth music, to both my car and various speakers. Another thing about this that is strange is that I can listen to music with my Jaybird Bluebuds X, but if it were a call I would not hear anything. I have tried using another phone with my car's hands free system, and that phone works correctly. This is what leads me to believe that this is a phone issue.
About my phone. I have the Verizon Note 4, and have been running Jasmine ROM v6 since late May or early June maybe. My phone has worked fine until sometime in the beginning of August. Last night I decided to update my phone to Jasmine ROM v7, thinking that this is somehow a software issue (I had already tried wiping cache, deleting bluetooth devices etc.). I was able to update, but the issue is still there. I am now lost.
Has anyone experienced this before? This seems strange to me, that music works correctly, but call audio does not. I assume that the bluetooth hardware is working correctly, or else nothing would work and that the issue is somehow related to the software bluetooth profiles. Any ideas?
TL;DR; Bluetooth call audio on my end does not work, but music does. I'm not sure why.
Hi. Wondering if anybody could help. When I connect my oneplus 5T to my car I have problems. When it starts to call it disconnects the bluetooth from the car completely. However the call continues on the phone which is a complete pain as you cant use it through the hands free. Car is a BMW 630CI with pro nav if that helps.
Many Thanks
i first had problems to connect to my audi A3 bluetooth ... it simply didn´t find it
after trying again and changing the bluetooth audio codec it suddenly worked ...
Idk if it will work for you, but you can try changing the codec and se if it helps
Hi. Ive tried all 3. It connects fine and I can see my contacts but as soon as I hit dial it disconnects from the car.
Very strange.
Thanks for the suggestion tho
with mine in my car it every now and then gives me this a crackling sound.. Kind of irritating, I'm hoping a software update down the road fixes this.. I've tried all 3 codecs
Having issues with Bluetooth connection on my Prius Prime as well. It always disconnects, I had to disable Bluetooth on the phone and re-able it for it to work.
I experience the same with my Boss QC35. First connection, audio breaks with lots of noise and had to disable it and re-enable it.
Still found no solution. Hope the next update sorts it out as the bluetooth seems a mess.
So after looking around, there are issues with certain codecs and devices connecting being posted in the OP community forums. My Sony WH1000xm2 headphones stutter when using AptX HD. My JBL Everest 750NC's - if you turn the volume up too high, they disconnect from the phone. In my Cadillac ATS, whenever you place a call it'll stay connected, but you won't hear anything, and the other user can't hear you either.
I think they've acknowledged the issues and are working on them, but after putting Oreo on my Moto G5 Plus and Oreo's ability to change between all codec's on the fly (including native LDAC support!) I'm anxiously awaiting Oreo to be 'officially' released.
I'd say just be patient.. I'm sticking with this phone because I think it'll be worth it in the end. Wish I had better news!
so I resolved my Bluetooth issues by flashing FreedomOS. Now there is no intermittent crackling sound now and there is no issues at all ymmv, this was just my experience.
Thanks. Will wait for Oreo and then try different roms if it continues.
on FreedomOS before, it was giving me headache re-connecting to my Subaru car bluetooth, like after you shutoff engine, go somewhere and come back, unless you manually force connecting to the car, it barely auto reconnect back.
And also takes so long to get data sync from my Fitbit chargeHR to the app.
I don't think this kind of bluetooth issue related to what rom we have but the kernel and more specifically BT firmware.
-----edit-------
My friend also got BT issue when he tried to connect to BT headset. Hope Oneplus get something fixed on new oreo or updates
Just an update. Since upgrading to the official Oreo rom my problems have disappeared and my phone now works fine with the car Bluetooth.
Chris
I still have problems. Pause and unpause, and the track restarts. After ending a phone call the track restarts. 2018 RAM, Uconnect
With stock ROM 4.7.2 bluetooth connected only for a few seconds with my Audi A6. With every following stock ROM version it didn't even connect.
I tried every single Audio-Codec and the different settings in developer options - nothing helped. Once I cleared data & cache from the bluetooth system apps followed with a soft brick
Hi all,
Had same issues with my Hyundai ix35 and oneplus 5t (Nougat), tracks skipping, distorted audio in calls, etc... Tried emptying bluetooth cache, switching audio codecs without success. Now I just received the OTA update to Oreo (8.0), Oxygen rom 5.0.3 and it solved the issues!!! Yeay, no more auxilary cable hanging around !
fx_viper said:
Hi all,
Had same issues with my Hyundai ix35 and oneplus 5t (Nougat), tracks skipping, distorted audio in calls, etc... Tried emptying bluetooth cache, switching audio codecs without success. Now I just received the OTA update to Oreo (8.0), Oxygen rom 5.0.3 and it solved the issues!!! Yeay, no more auxilary cable hanging around !
Click to expand...
Click to collapse
I started from scratch but the issue persists.
I am having the same issue in my car. It no longer displays track information and the connection is not very stable. I will try switching the codec and report back.
i don.t have any volume control from the phone basically when i connect it to my car stereo
i can control the volume for the first 4-5 clicks ... and then the slider moves but there is no difference in the volume
i have to turn the volume from the stereo almost to the max
whit my old samsung tablet works great ... i have maybe 50% more volume then with my phone
tried all codecs ...
I've been trying to use LineageOS on my OP3 lately, but have always returned to OxygenOS because of one problem: bluetooth audio quality, both input and output. Whenever I make a call, no matter where it is (Skype, Teamspeak, Discord) it always makes a fax machine sound and then proceeds to bomb me with static. I can listen to music without any issues but there is something about calls that are causing problems with bluetooth specifically.
I've tried custom kernels to no avail. The only thing that seems to work is using OxygenOS. What are your thoughts on this? Have you have the same/similar issue? What do you think I can do?
Thanks for your time.
Hey folks, I installed Lineage OS 16 on my HTC U11 recently (unofficial version as the phone isn't officially supported) and had the known issue that there were no sounds in voice calls (I couldn't hear anyone and nobody could hear me). I successfully fixed the issue by editing two lines in the build.prop ("persist.vendor.audio.fluence.voicecall=false" and "ro.vendor.audio.sdk.fluencetype=none") as suggested by some threads in this forum.
Lately while my phone was connected to my car via bluetooth and I got a call (speakerphone), I had the same issue as mentioned above, no sound at all. After that I disconnected my phone from my car, deactivated bluetooth and called back, but the problem persisted and there was still no sound. Then I restarted my phone, called again and everything worked fine.
This happened a few times now and only when I called somebody or received a call while the phone was connected via bluetooth to an external device. It's very annoying that I can't use my phone via speakerphone anymore and that I have to restart the phone everytime after I received a call while I sat in the car.
I hope anyone has a solution for this and hopefully one that doesn't include the reinstallation of Lineage OS
Thanks in advance.
Anyone?
push
push
Someone gave me a solution here https://forum.xda-developers.com/u1...oice-calls-speakerphone-t3994433#post80829083