[SOLVED] Download mode can't be removed, I had to try all dat long but I finally could boot into it.
Hi,
So... I had a working Samsung Galaxy S9 (SM-G960F/DS) running Lineage OS yesterday. I noticed something wrong related to the mobile network in my country (FR) and decided to flash the correct stock firmware matching the country code XEF before doing a full LOS reinstall.
Fast-forward 20hrs of download, I perform the flash operation this morning using heimdall(1) and reboot.
Now, the phone bootloops. I can't get into download mode as usual, and the only thing that is available is the stock recovery mode that allows:
apply update from adb
apply update from sdcard
wipe data
wipe cache
mount /system
view logs
run graphics test
I have a working all-countries firmware archive that contains the one that was working previously (minus the mobile network problem). But since I don't have download-mode anymore I can't install it. I tried adb sideload (which is available via the "apply update from adb" option), wipe data/cache to no avail.
Is that hard-brick? Did you ever experience a similar situation? I think there's no way out of this but any advice would be appreciated.
Thanks again!
You should be able to get into Download Mode (Vol Down & Bixby & Power)
Keep trying, try keeping hold of the button combo until after the phone reboots twice hopefully the second time into download mode
Download mode has nothing to do with firmware or recovery that has been flashed, and if you can enter recovery mode, it doesn't sound like a hardware problem either
And use a Windows machine & ODIN 3.13.1 to flash stock
Unfortunately it doesn't seem to work, i tried many tiimes and I usually can do that very easily. It seems flashing the corrupted images wiped it out.
mateba said:
Unfortunately it doesn't seem to work, i tried many tiimes and I usually can do that very easily. It seems flashing the corrupted images wiped it out.
Click to expand...
Click to collapse
Impossible as it is not part of the firmware, nor can be touched by firmware, it is part of the hardware (Think BIOS vs OS)
You can even 100% wipe all internal storage clean so there is no OS at all and download mode will still work fine
Keep trying
Okay I guess it's possible that the download mode is still there but I can't reach it.
I've been trying hundreds of times every combination I can think of (including Home + Vol Down + Power that used to work).
Any alternative way to trigger the download mode ?
How are you trying Home? There is no physical home button
The button combo is Vol Down & Bixby & Power from a powered off state
Keep a hold of all 3 until it hits the Warning screen, then hit Vol Up to enter Download mode
No other way to access it that I know of, USB Jig hasn't worked since a few models back
Have you tried factory resetting from inside recovery? Unless you used CSC during the stock firmware flash, that could be a reason for the bootloop
*Detection* said:
How are you trying Home? There is no physical home button
Click to expand...
Click to collapse
Yeah sorry, speaking of the Bixby button.
*Detection* said:
The button combo is Vol Down & Bixby & Power from a powered off state
Keep a hold of all 3 until it hits the Warning screen, then hit Vol Up to enter Download mode
Click to expand...
Click to collapse
That's what used to work indeed. I did that many times before.
*Detection* said:
No other way to access it that I know of, USB Jig hasn't worked since a few models back
Have you tried factory resetting from inside recovery? Unless you used CSC during the stock firmware flash, that could be a reason for the bootloop
Click to expand...
Click to collapse
I tried factory reset/wipe cache from inside the recovery and yes, I used CSC.
mateba said:
Yeah sorry, speaking of the Bixby button.
That's what used to work indeed. I did that many times before.
I tried factory reset/wipe cache from inside the recovery and yes, I used CSC.
Click to expand...
Click to collapse
Maybe the issue is with the Volume Down button, does it work inside of recovery for navigating the menu ?
What happens when you try entering Download mode? It just tries to boot as if you didn't press anything?
Only other thing is to hold Volume Down & Bixby, then connect the USB cable to power it on (instead of using the power button)
*Detection* said:
Maybe the issue is with the Volume Down button, does it work inside of recovery for navigating the menu ?
What happens when you try entering Download mode? It just tries to boot as if you didn't press anything?
Only other thing is to hold Volume Down & Bixby, then connect the USB cable to power it on (instead of using the power button)
Click to expand...
Click to collapse
The volume down button works perfectly in the recovery menu.
When I try entering download mode normally while device is powered down, the phone never turns on.
When I try to hold the buttons during the interval of the boot loop, it goes to recovery (yes, even with volume down, not volume up).
The other technique you mentioned also went to recovery.
*Detection* said:
Impossible as it is not part of the firmware, nor can be touched by firmware, it is part of the hardware (Think BIOS vs OS)
You can even 100% wipe all internal storage clean so there is no OS at all and download mode will still work fine
Keep trying
Click to expand...
Click to collapse
BINGO! I kept trying. Did this all day literally hundreds of times.
And it just worked.
I didn't change the way I do it, I think there was some nasty timing going on with the boot loop.
Anyways... lesson learnt: download mode is indeed hardcoded. What a day!
Thanks for being so helpful!
mateba said:
BINGO! I kept trying. Did this all day literally hundreds of times.
And it just worked.
I didn't change the way I do it, I think there was some nasty timing going on with the boot loop.
Anyways... lesson learnt: download mode is indeed hardcoded. What a day!
Thanks for being so helpful!
Click to expand...
Click to collapse
Good stuff, yea well whatever it was hopefully it's sorted now, use ODIN this time
Related
So, after trying out a few firmwares (JM2, JG8, JM5) and kernels (Samset&OC) I can't no longer boot to recovery with Vol UP + Home + power. I can't really say when this problem first occurred, but maybe with JG8 flash. The strange thing is that I can get to recovery with adb reboot recovery and through android console with reboot recovery (when rooted ofc). Also download mode works great.
Things I have tried:
-flash again to JM2 and JM5 with re-partition checked (512 PIT)
-cleared cache+data through recovery
-factory reset through phone code (this also cleared the internal SD)
-took out the battery multiple times
-booted phone without sim
-flashed phone without sim
-changed CSC with phone code
-restore a nandroid backup of JM2. Recovery worked with this one when I took the backup
-there's no external flash card inserted
Soooo..does anyone have any idea about this kind of problem?
i had a similar problem after trying few ROMs. In my case, when i pres the key combi i get the boot logo and then few seconds later the screen goes black and then i see the boot logo again, and this goes forever. and then i tried pressing the same key combination simultaneously and once i see the boot logo i let go the power button and keep the vol up and home pressed, and then only it went into the recovery mode.
hope it works the same for you
Cheers
Agreed, 99.9% chance you are doing it wrong.
Sent from my GT-I9000 using XDA App
mmthabet: I had the exact same experience. Letting go of the power button when the logo appears lets me enter recovery.
or you may need to take out the battery first for a few seconds... after that, you can reinsert it back and try recovery mode...
at least this work for me...
Thanks for replies but none of the solutions work. The recovery mode button combination DID work for a few weeks, but then just stopped working.
I know that I'm doing it right. I have always pressed vol up and home down until the phone loaded recovery and only briefly pressed power button just at the start. I have also tried to remove battery multiple times and once waited 30 mins before re-inserting it.
Trust me, I'm not doing it wrong :s And recovery is working great through adb reboot recovery and shell.
Darkstriker said:
Agreed, 99.9% chance you are doing it wrong.
Click to expand...
Click to collapse
More so a timing issue. Buttons not pressed at the same time.
I get it all the time for all combo's.
Just keep trying.
You might already have this however just in case you dont, check out Quick Boot.
http://www.appbrain.com/app/com.siriusapplications.quickboot
With this app you can boot into recovery mode. Have to be rooted though.
odyssey61 said:
You might already have this however just in case you dont, check out Quick Boot.
http://www.appbrain.com/app/com.siriusapplications.quickboot
With this app you can boot into recovery mode. Have to be rooted though.
Click to expand...
Click to collapse
this wont work, if you bricked the phone in a bad flash situation.
in times when this app works, you can easily do adb reboot recover
so this app still doesn't address the real issue of how to get the 3 buttons press hardware recovery mode
Laum said:
I know that I'm doing it right. I have always pressed vol up and home down until the phone loaded recovery and only briefly pressed power button just at the start.
Click to expand...
Click to collapse
I release the buttons right when the first Samsung texts comes on the screen. It will take it to Recovery mode. I also had a "boot loop" few times, if I keep pressing the buttons all the time.
Have you tried release your fingers right in the first texts? I really don`t know what is exactly the right way to press the buttons, but this always have took it to Recovery.
Looks like my latest full wipe with *2767*3855# cured it. Flashed JM5-->full wipe-->samset1.9b-->samset kernel and now it works. It must've got stuck somehow in my previous JM5 installation.
I cant get into the download- or recovery-mode by using these keys... so i am not able to flash a new firmware! can anybody help me please? is there a chance to get into the download mode by using an adb-command?
please help i just cant get into the download mode!
Igor02 said:
I cant get into the download- or recovery-mode by using these keys... so i am not able to flash a new firmware! can anybody help me please? is there a chance to get into the download mode by using an adb-command?
please help i just cant get into the download mode!
Click to expand...
Click to collapse
yes
adb reboot download
but it is dangerous, as you can not recover from a bricked state, if your flash is not compatible or if something went wrong with odin, etc.
I you're bricked and can't get into Download or recovery mode, leave the device to boot, it will just show a black screen for a while then will turn its self off, once this happens you should be able to use the key combo.
arch3rm said:
I you're bricked and can't get into Download or recovery mode, leave the device to boot, it will just show a black screen for a while then will turn its self off, once this happens you should be able to use the key combo.
Click to expand...
Click to collapse
AHHHHHHHHH OMG, WHY DIDN'T YOU SAY THIS SOONER, like 5 hours ago...
i could have tried that, and not had to send my phone back for "repair"
well i'm sure i'll see that screen again in the future, i'll try that next time
AllGamer said:
AHHHHHHHHH OMG, WHY DIDN'T YOU SAY THIS SOONER, like 5 hours ago...
i could have tried that, and not had to send my phone back for "repair"
well i'm sure i'll see that screen again in the future, i'll try that next time
Click to expand...
Click to collapse
Well I did just get the phone 2 days ago,
Had that problem the same day, discovered the fix two hrs of horror later
Same Problem here i contact samsung here in mexico and a technical aggent tell me if we make a repair our phones we need a jtag and this is so bad alllready contact many people jtag manufacturers in china and honkong trow alibaba.com and no luck don't have other source i try is contact to nspro and z3x and no support for this repairand only hope still have is a reply from the people in the forum SMTi Jtag Repair Tool
Its hard to me go to UK Samsung Service Center i'm in mexico like i said
and i'm waith for a solve this i;m so very sad
http://www.youtube.com/watch?v=g8AIvalzBvY
Darkstriker said:
Agreed, 99.9% chance you are doing it wrong.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I usually release the power button on the boot screen first and then the other two buttons
arch3rm said:
I you're bricked and can't get into Download or recovery mode, leave the device to boot, it will just show a black screen for a while then will turn its self off, once this happens you should be able to use the key combo.
Click to expand...
Click to collapse
Any idea how long you waited? Been waiting 5 minutes, hasn't shut off. Mine's a Bell though so I'm guessing I won't have any luck.
The way i do it (no chance of doing it wrong and timing):
hold down+home and then also press the power button for a little more then 10 seconds (so all 3 buttons for 10 seconds). The phone will reset into download mode, never fails in whatever mode the phone originaly was..
I can use "adb reboot recovery" to enter TWRP 2.7 recovery mode, but I want to use key combination, please tell me how to that.
Hold Power + Vol Down > Wait until LG Logo pops up and release from both buttons > quickly hold Power + Vol Up + Vol Down again
It will pop up with some message about reset to factory settings, but it's all a bluff.
Hit Power x3 times to confirm and you'll get to TWRP recovery
Thanks, it works.
actually I enter this factory reset mode before, but i just don't know it a "fake".
so will this erase all data or not?
Jasiekor said:
so will this erase all data or not?
Click to expand...
Click to collapse
That will depend on whether you've installed TWRP or not.
If you've still got the original recovery it will wipe it like it says it will, if you've got a custom recovery it will take you to it.
The standard recovery isn't a recovery like you're expecting it to be, if just has a way of resetting things to default without allowing you to do anything extra. OEM don't like giving people options but want a way to reset to defaults that the customer can use before needing to return a faulty unit which might not be faulty. If that makes sense.
Pman said:
Hold Power + Vol Down > Wait until LG Logo pops up and release from both buttons > quickly hold Power + Vol Up + Vol Down again
It will pop up with some message about reset to factory settings, but it's all a bluff.
Hit Power x3 times to confirm and you'll get to TWRP recovery
Click to expand...
Click to collapse
Thought I'd lost recovery after flashing the lp rom. Sorry for the bump! Many thanks and lol at the 'bluff' factory reset!
Fullmetal Jun said:
Thought I'd lost recovery after flashing the lp rom. Sorry for the bump! Many thanks and lol at the 'bluff' factory reset!
Click to expand...
Click to collapse
No problems, happy to help
Fullmetal Jun said:
Thought I'd lost recovery after flashing the lp rom. Sorry for the bump! Many thanks and lol at the 'bluff' factory reset!
Click to expand...
Click to collapse
From what I can tell, it's not a "bluff". It seems that the stock recovery partition would just automatically do a factory reset, so it warns you before booting the recovery partition. Seeing as you're non-stock, it just boots into TWRP/CWM. It's a valid warning that's simply set up in a weird way.
i hard rest my lg stylo but when i did it erased all my key comob how did i get them back
crystalgirl20977 said:
i hard rest my lg stylo but when i did it erased all my key comob how did i get them back
Click to expand...
Click to collapse
You don't.
We'll you might be able to but you're going about it the wrong way.
First you need to find the right forum for your device, then you read, followed by more reading.
At some point you've hopefully discovered that you should have done all this reading before you reset your device.
Also before pressing the post button on your next post, read it first to make sure it makes sense.
Thank you very much, I tried other combinations found on some web pages that failed. This one worked!
Issue remains.
Pman said:
Hold Power + Vol Down > Wait until LG Logo pops up and release from both buttons > quickly hold Power + Vol Up + Vol Down again
It will pop up with some message about reset to factory settings, but it's all a bluff.
Hit Power x3 times to confirm and you'll get to TWRP recovery
Click to expand...
Click to collapse
I got myself in a pretty bad situation. I have the stock rom. I am trying to get that back using recovery but it's not working. Only factory reset screen. This tablet stopped working in 2015. It cannot write ANY data ANYWHERE. Can't take pics, Can't take screenshots, Can't download apps. Nothing. I really want my tablet back... :/
CharaGloom said:
I got myself in a pretty bad situation. I have the stock rom. I am trying to get that back using recovery but it's not working. Only factory reset screen. This tablet stopped working in 2015. It cannot write ANY data ANYWHERE. Can't take pics, Can't take screenshots, Can't download apps. Nothing. I really want my tablet back... :/
Click to expand...
Click to collapse
I'm probably not the best person to help, however if you put a new post up with more details on what you have access too, the community will be able to help out.
CharaGloom said:
I got myself in a pretty bad situation. I have the stock rom. I am trying to get that back using recovery but it's not working. Only factory reset screen. This tablet stopped working in 2015. It cannot write ANY data ANYWHERE. Can't take pics, Can't take screenshots, Can't download apps. Nothing. I really want my tablet back... :/
Click to expand...
Click to collapse
Install LG software on your computer first. Then with the tablet completely off, hold VolUp and plug the tablet into the computer. That will enter LG download mode. Use the LG software on your PC to install the latest firmware available for your device. From there you can use the guides on this forum to go custom if you so desire.
Hey guys.A while back I wanted to install adfree so I rooted my e975.Sometime in August I updated the android to 4.4.2 and I think the phone got unrooted.But SuperSU was still installed and I wanted it removed.So I tried a factory reset (settings->backup&reset->factory reset data) but SuperSU was still there afterwards.
Then I thought I should flash the kdz.So I tried to get my phone into download mode (volume buttons pressed and then connect to pc) but the screen shows nothing.I also tried going into recovery (volume down+power button) but that doesn't appear to work either.
Does anyone have any idea what's wrong with my phone?Everything else is working fine so maybe I'm doing something wrong.
Sorry if something doesn't make sense, English isn't my first language.
No one has any ideas?
I think this may be a hardware problem so I should find a way to hide the fact that the phone got rooted in case I need to sent it back.Is there any way to remove SuperSU without flashing the kdz?
sir Impecable said:
Hey guys.A while back I wanted to install adfree so I rooted my e975.Sometime in August I updated the android to 4.4.2 and I think the phone got unrooted.But SuperSU was still installed and I wanted it removed.So I tried a factory reset (settings->backup&reset->factory reset data) but SuperSU was still there afterwards.
Then I thought I should flash the kdz.So I tried to get my phone into download mode (volume buttons pressed and then connect to pc) but the screen shows nothing.I also tried going into recovery (volume down+power button) but that doesn't appear to work either.
Does anyone have any idea what's wrong with my phone?Everything else is working fine so maybe I'm doing something wrong.
Sorry if something doesn't make sense, English isn't my first language.
Click to expand...
Click to collapse
just do a hard reset or press vol+ and connect to pc again or just check out drivers
brijen95 said:
just do a hard reset or press vol+ and connect to pc again or just check out drivers
Click to expand...
Click to collapse
Thanks for helping me brijen95.I just tried what you said and volume down+power key doesn't seem to work.The screen just stays black so I can't do a hard reset.Vol+ and connect to pc doesn't work either.The phone just starts charging after a few seconds.I also just reinstalled the drivers but it didn't change anything.
I had a hard time getting into download mode recently as well. What ended up working for me was holding the volume keys for about 10 seconds, then while still holding the buttons, plugging the usb cable into the phone.
No that didn't work either .
Is there any way to remove SuperSU?Keep in mind that my phone is not rooted anymore.
Edit: Well I just found out that the phone is entering download mode but not showing anything on the screen.I managed to flash the kdz with no issues.
if you are stuck at samsung logo after flashing with odin
here's what you have to do:
1. While on Samsung logo. press power key + volume up and down + home button (all together)
2. When the screen is off. Press Power key + Volume Up + home button to enter recovery mode.
3. Wipe Data
4. Wipe Cache
5. Reboot to system
you should be fine right now ^^
cheers!
lexjay said:
if you are stuck at samsung logo after flashing with odin
here's what you have to do:
1. While on Samsung logo. press power key + volume up and down + home button (all together)
2. When the screen is off. Press Power key + Volume Up + home button to enter recovery mode.
3. Wipe Data
4. Wipe Cache
5. Reboot to system
you should be fine right now ^^
cheers!
Click to expand...
Click to collapse
I'm having that problem now. I followed your instructions and got to the recovery mode or "Odin Mode" and it's been saying it's downloading for about 10 min or so. Any idea on how long it should take ?
casual167 said:
I'm having that problem now. I followed your instructions and got to the recovery mode or "Odin Mode" and it's been saying it's downloading for about 10 min or so. Any idea on how long it should take ?
Click to expand...
Click to collapse
Actually I believe it's the download mode that I'm in. It doesn't seem to get to the recovery mode when I press the Volume up key and power button for some reason.. Am I doing something wrong
casual167 said:
Actually I believe it's the download mode that I'm in. It doesn't seem to get to the recovery mode when I press the Volume up key and power button for some reason.. Am I doing something wrong
Click to expand...
Click to collapse
Follow these instructions implicitly.
Hold POWER + VOL DOWN + HOME.
As soon as it restarts change to VOL UP while still holding the other buttons.
Do NOT let go of any of the buttons until recovery boots.
ashyx said:
Follow these instructions implicitly.
Hold POWER + VOL DOWN + HOME.
As soon as it restarts change to VOL UP while still holding the other buttons.
Do NOT let go of any of the buttons until recovery boots.
Click to expand...
Click to collapse
That's what I've been doing exactly but for some reason it just goes right back to the logo screen. I was able to get into the recovery mode one time out of 100 and I went through the process of factory reset but it didn't solve the problem. Now I can't get back into it. It's weird because I have no problem getting into the download mode pressing the volume down but volume up doesn't seem to work. Not sure why or what to do
I'd try reflashing stock recovery then try booting into it again.
If it flashes then you should be able to boot into it.
http://www.mediafire.com/?qyybs0m1yln443x
ashyx said:
I'd try reflashing stock recovery then try booting into it again.
If it flashes then you should be able to boot into it.
http://www.mediafire.com/?qyybs0m1yln443x
Click to expand...
Click to collapse
How exactly would I do that? I'm not to inclined when it comes to this stuff so any help you can give would be appreciated
Install Samsung usb drivers, put your tab into download mode, connect to pc, run Odin, load the file into the AP slot then click start.
http://forum.xda-developers.com/attachment.php?attachmentid=3109599&d=1420980613
i think i bricked mine...
These are the 2 screens i get whenever i try anything
joker616 said:
i think i bricked mine...
These are the 2 screens i get whenever i try anything
Click to expand...
Click to collapse
You haven't bricked anything, there could be any number of reasons why it won't boot past the logo.
Easiest way to resolve it would be to reinstall the stock rom.
The second image is download mode.
joker616 said:
i think i bricked mine...
These are the 2 screens i get whenever i try anything
Click to expand...
Click to collapse
That's the exact same situation I'm in. Every time I restart it I can't get passed that damn Samsung logo screen. I tried the whole flash with Odin process but I realized that when I connect the tablet to the computer, I get an "MTP Device Driver Failed" message so I'm assuming since the computer doesn't recognize it, even tried with KEIS and it doesn't, that I'm unable to complete the Odin job because that goes until 'Initialization' and stops there. Were you able to fix yours?
casual167 said:
That's the exact same situation I'm in. Every time I restart it I can't get passed that damn Samsung logo screen. I tried the whole flash with Odin process but I realized that when I connect the tablet to the computer, I get an "MTP Device Driver Failed" message so I'm assuming since the computer doesn't recognize it, even tried with KEIS and it doesn't, that I'm unable to complete the Odin job because that goes until 'Initialization' and stops there. Were you able to fix yours?
Click to expand...
Click to collapse
Are you saying you still can't get into recovery mode?
Also what is your device model?
ashyx said:
Are you saying you still can't get into recovery mode?
Also what is your device model?
Click to expand...
Click to collapse
No I can't. I've tried a thousand times in all different sequences of holding the three buttons and it just doesn't go. It's SM-T800. They screen shots on the first page is exactly what I get. Either the logo screen when trying to get into recovery or download mode which it has no problem going into.
casual167 said:
No I can't. I've tried a thousand times in all different sequences of holding the three buttons and it just doesn't go. It's SM-T800. They screen shots on the first page is exactly what I get. Either the logo screen when trying to get into recovery or download mode which it has no problem going into.
Click to expand...
Click to collapse
The two files below should boot you directly into recovery as soon as you start the tablet if you can flash them. Flash with Odin from the AP slot.
Make sure you put the device into DOWNLOAD mode first then connect your usb cable!
You can then do a factory reset and then try and flash the stock rom.
Stock recovery
Twrp recovery
.
ashyx said:
The two files below should boot you directly into recovery as soon as you start the tablet if you can flash them. Flash with Odin from the AP slot.
Make sure you put the device into DOWNLOAD mode first then connect your usb cable!
You can then do a factory reset and then try and flash the stock rom.
Stock recovery
Twrp recovery
.
Click to expand...
Click to collapse
Yeah I tried that too but when I connect the tablet to my comp, I get this 'Samsung Mobile MTP Device Failed' message so my comp doesn't even recognize the tablet. I even tried connecting with KEIS but that doesn't see it either because of that error. Idk if that's related to this issue that I'm having but I'm assuming that since the comp doesn't recognize the tablet because of that error, it won't finish the ODIN job. I get up to 'Initialization' and nothing after. I tried uninstalling and reinstalling the Samsung drivers and that didn't work either. Seems I can't catch a break here
casual167 said:
Yeah I tried that too but when I connect the tablet to my comp, I get this 'Samsung Mobile MTP Device Failed' message so my comp doesn't even recognize the tablet. I even tried connecting with KEIS but that doesn't see it either because of that error. Idk if that's related to this issue that I'm having but I'm assuming that since the comp doesn't recognize the tablet because of that error, it won't finish the ODIN job. I get up to 'Initialization' and nothing after. I tried uninstalling and reinstalling the Samsung drivers and that didn't work either. Seems I can't catch a break here
Click to expand...
Click to collapse
Mtp, kies and anything else is irrelevant, they are OS dependent.
Just put the tablet into download mode. Download mode works in boot loader mode. No need for the os.
ashyx said:
Mtp, kies and anything else is irrelevant, they are OS dependent.
Just put the tablet into download mode. Download mode works in boot loader mode. No need for the os.
Click to expand...
Click to collapse
Ok than Idk why it doesn't go passed the 'Initialization'. I tried multiple times and keep getting stuck on that
casual167 said:
Ok than Idk why it doesn't go passed the 'Initialization'. I tried multiple times and keep getting stuck on that
Click to expand...
Click to collapse
Ok we need to take this step by step as theres something amiss here.
DID YOU AT ANY POINT WHILE THE TABLET WAS WORKING ENABLE 'REACTIVATION LOCK'?
1. Ensure the Samsung drivers are installed (important) Samsung usb driver
2. Before connecting anything to the PC put the tablet in DOWNLOAD mode first.
3. Plug the USB cable into a USB 2 port
4. Wait for the 'ADDED' message (if you dont get this it wont work)
5. Load the tar file into the AP slot.
6. Click START
7. If it doesn't start to flash reboot the tablet directly back into DOWNLOAD mode without touching anything else then unplug and replug the USB cable back in.
8. If it still doesn't flash try ODIN 3.07 ODIN
9. Report back and post a screenshot (if it doesn't work).
ashyx said:
Ok we need to take this step by step as theres something amiss here.
DID YOU AT ANY POINT WHILE THE TABLET WAS WORKING ENABLE 'REACTIVATION LOCK'?
1. Ensure the Samsung drivers are installed (important) Samsung usb driver
2. Before connecting anything to the PC put the tablet in DOWNLOAD mode first.
3. Plug the USB cable into a USB 2 port
4. Wait for the 'ADDED' message (if you dont get this it wont work)
5. Load the tar file into the AP slot.
6. Click START
7. If it doesn't start to flash reboot the tablet directly back into DOWNLOAD mode without touching anything else then unplug and replug the USB cable back in.
8. If it still doesn't flash try ODIN 3.07 ODIN
9. Report back and post a screenshot (if it doesn't work).
Click to expand...
Click to collapse
I know for a fact that I never enabled the Reactivation Lock.. But you know, after literally days and hours including my entire weekend just searching the internet and trying every possible fix scenario that people have tried, I just gave in and sent it to Samsung this afternoon to have them fix it. Nothing I was doing seemed to work and I do believe I tried everything within my little knowledge to try. Let me ask you though, when I get it back in normal working order, would going through the steps to install the TWRP recovery and a ROM prevent me from being in this situation again or at least be able to actually fix it on my own?
If you dont mind tripping Knox and possibly warranty then I believe installing custom recovery is one of the best tools you can Install to a device.
It can get you back to a working state in minutes if you make a full backup.
It's a no brainer to install custom recovery if you intend to root and modify the device in any way.
Lineage /Oreo was installed thru TWRP 3.xxx, running fine but unhappy , no Viper4Android , so I installed it as a module on Magisk,
after installing the driver, was ask to reboot as directed, but went into bootloop , stuck on a boot loop " Set Warranty Bit : kernel " top left corner and Samsung Galaxy Note 3 on screen ; I tried Vol Up +Home+ power combo and all other combi I could think but no luck , Odin wont recognize my phone, tried Samsung 300k tool with no luck, I fell like a newbie after using so many ROMs on all of my devices, I google how to get back to download mode but no luck, I need help to make my Samsung note 3 work again, PLEASE. THANKS.
Hi,
I have same phone but I'm running Resurrection Remix 6 which is based on LineageOS 15.1 and I'm able to use the Viper module through Magisk 16.3 without any problems. No bootloops, no nothing.
I never would have guessed that a sound mod could brick the device to the point that the buttons no longer function. Hopefully other users will chime in and help you fix it.
Best of luck.
EDIT: Try taking the battery out to force it to shut down and then try the recovery/download mode technique again. Sometimes, it'll end up in a bootloop and the buttons will be become unresponsive. I know it may seem a bit strange, but that scenario is entirely possible given the age of the device.
Sent from my SM-N900T using Tapatalk
AndroidHacker99 said:
Hi,
I have same phone but I'm running Resurrection Remix 6 which is based on LineageOS 15.1 and I'm able to use the Viper module through Magisk 16.3 without any problems. No bootloops, no nothing.
I never would have guessed that a sound mod could brick the device to the point that the buttons no longer function. Hopefully other users will chime in and help you fix it.
Best of luck.
EDIT: Try taking the battery out to force it to shut down and then try the recovery/download mode technique again. Sometimes, it'll end up in a bootloop and the buttons will be become unresponsive. I know it may seem a bit strange, but that scenario is entirely possible given the age of the device.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I did tried RR 6, but I had trouble with 1.) power Button menu option, screenshot/screen record , 2.) Viper4Android , a must have on all my Android devices, and last 3.) latest Android version , if I dont get the first 2 obsession , that's when I switched to a different ROM (LOL), but seriously , all I need is to get HELP to get back to download mode again, Vol Up + Home + Power, did that for 2 days approaching the 3rd day (LOL). HEEEELLLLLPPPPPPP.
Isn't download mode volume down + home + power?
Aykee said:
I did tried RR 6, but I had trouble with 1.) power Button menu option, screenshot/screen record , 2.) Viper4Android , a must have on all my Android devices, and last 3.) latest Android version , if I dont get the first 2 obsession , that's when I switched to a different ROM (LOL), but seriously , all I need is to get HELP to get back to download mode again, Vol Up + Home + Power, did that for 2 days approaching the 3rd day (LOL). HEEEELLLLLPPPPPPP.
Click to expand...
Click to collapse
You need to take the battery out to force it out of the bootloop then push volume DOWN, home & power.
Sent from my SM-N900T using Tapatalk
audit13 said:
Isn't download mode volume down + home + power?
Click to expand...
Click to collapse
Sorry, I mean Vol down but no luck.
You may have to try a USB jig to get into download mode.
https://forum.xda-developers.com/galaxy-s3/general/ref-borrow-usb-jig-near-updated-t1891197
Aykee said:
Sorry, I mean Vol down but no luck.
Click to expand...
Click to collapse
Can you also not boot into TWRP by holding Home+PWR+Volume up? If so you can boot to Download Mode from there.
Sent from my toaster using Magic
audit13 said:
You may have to try a USB jig to get into download mode.
https://forum.xda-developers.com/galaxy-s3/general/ref-borrow-usb-jig-near-updated-t1891197
Click to expand...
Click to collapse
Sounds like a good idea, ordering on amazon..thanks
ludeawakening said:
Can you also not boot into TWRP by holding Home+PWR+Volume up? If so you can boot to Download Mode from there.
Sent from my toaster using Magic
Click to expand...
Click to collapse
I did all button combination, cant get into download nor recovery mode , am not sure if buttons are wack but it feel responsive and clicky but thanks anyway am going for the USB jig, I never had one.
audit13 said:
You may have to try a USB jig to get into download mode.
https://forum.xda-developers.com/galaxy-s3/general/ref-borrow-usb-jig-near-updated-t1891197
Click to expand...
Click to collapse
I got the USB jig but nothing happen after plugging in, any other idea please?
Removed the battery, inserted the jig, and then inserted a charged battery?
audit13 said:
Removed the battery, inserted the jig, and then inserted a charged battery?
Click to expand...
Click to collapse
The jig that I bought didnt do anything so I make my own, I can go to download mode now, installed this ROM/firmware N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME.tar.md5 succesfully but wont go pass beyond the tmobile logo, tried a few more firmware and lately this N900TUVUFOL1 and also , am stuck to Tmobile logo, anybody knows which firmware would likely bring my note 3 back to life, thanks in advance.:
Try this:
Uncheck everything in Odin except f reset time. Flash the latest ROM again. When you see the word "reset" in the status WIndow, remove the USB cable from the phone, remove the battery, replace battery, boot into recovery mode using buttons, factory wipe, and reboot.
audit13 said:
Try this:
Uncheck everything in Odin except f reset time. Flash the latest ROM again. When you see the word "reset" in the status WIndow, remove the USB cable from the phone, remove the battery, replace battery, boot into recovery mode using buttons, factory wipe, and reboot.
Click to expand...
Click to collapse
After "reset" status, I did remove cable, remove batt and boot up to recovery, the blue light lit up as if its going to recovery mode , android logo showed up but phone boot up to normal but not pass beyond tmobile logo, so I did CF-root via odin , but still not booting to recovery.
Try flashing the entire ROM in AP.
audit13 said:
Try flashing the entire ROM in AP.
Click to expand...
Click to collapse
Thanks Audit13,
I manage to restore my Note 3 to TMobile Android 5 using repair firmware , it looks like I wipe out the partition ,My phone runs like new, am just wondering why I cant go to Download mode with button combinations of Volume -/Home/power , tried to install twrp via Odin, it says PASS but Vol +/Home/Power wont lead me to bootloader, did tried CWM , it will boot up but before I could start using it, it will reboot to normal and I could not go back to bootloader with button combo Vol+/Home/Power........HELP...
Download mode is volume down+home+power.
To flash TWRP with Odin, try this:
Open Odin and only check f reset time. Flash TWRP. When you see the word reset in the Odin status window, remove the USB cable from the phone, remove the battery, replace battery, press home + volume up + power.
N900TUVUFOB6_N900TTMBFOB6_TMB and N900 PIT - are the files am using after screwing up my partition( I dont know how I did that ), this Note 3 is running like a hot knife on a butter BUT the only bug I notice is Volume Up + Home + Power ( recovery) NOR Volume Down + Home + Power (download ) does not work, I can only go to download mode using a USB JIG and no other way. I can flash TWRP via Odin with Auto-reboot not ticked , so I could remove cable, battery , hoping to get me to recovery mode but I couldnt. Did I miss a step?I need help.