Related
while trying to root miui8 my phone got bootlooped and now i can only access fastboot and mi recovery.while trying to flash rom through mi flash it shows echo mismatched device and while using adb commands it shows waiting for device.my device is detected by miflash though.Please help
can you reboot to recovery ?
EmanzzKie said:
can you reboot to recovery ?
Click to expand...
Click to collapse
yes but its mi recovery
blaze2fire said:
yes but its mi recovery
Click to expand...
Click to collapse
for this you need to wipe everything on your phone except for external storage because it's optional,
to do that you need custom recovery or you can directly dirty flash stock ROM from MI RECOVERY
to dirty flash:
if you can copy files between pc to your phone then
download MIUI ROM for Redmi 1s, copy ROM to your phone
reboot to MI Recovery and then find the package
http://en.miui.com/download-226.html
if you clean flash:
then you might need twrp or cwm recovery (I prefer twrp)
if you can copy files between pc to your phone then
download recovery for Redmi 1s, copy recovery to your phone
reboot to MI Recovery and then find the package
https://drive.google.com/drive/u/0/folders/0B6_hhjS3nx4IdzFHXzdfNXVCYm8
if you can't flash the zip file/s then try renaming it to "update.zip" without " "
then sign the zip using Zip Signer (u can get it by searching it on google)
Hi Friends, Need help very badly, Redmi 1S, unable to get recovery or fastboot, and in System device descriptor request failed, Device is not detected. Please help
EmanzzKie said:
for this you need to wipe everything on your phone except for external storage because it's optional,
to do that you need custom recovery or you can directly dirty flash stock ROM from MI RECOVERY
to dirty flash:
if you can copy files between pc to your phone then
download MIUI ROM for Redmi 1s, copy ROM to your phone
reboot to MI Recovery and then find the package
http://en.miui.com/download-226.html
if you clean flash:
then you might need twrp or cwm recovery (I prefer twrp)
if you can copy files between pc to your phone then
download recovery for Redmi 1s, copy recovery to your phone
reboot to MI Recovery and then find the package
https://drive.google.com/drive/u/0/folders/0B6_hhjS3nx4IdzFHXzdfNXVCYm8
if you can't flash the zip file/s then try renaming it to "update.zip" without " "
then sign the zip using Zip Signer (u can get it by searching it on google)
Click to expand...
Click to collapse
PROBLEM is i cant copy anything
im planning to use an sdcard ill inform you guys whether it works:good: thansk anyways:laugh:
HwOTA7 + HwOTA8 for Huawei P10 Lite1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
and will be repack firmware (only HwOTA8)!!!
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA_WARSAW.zip
Short video tutorial for upgrade of any version authorized or unauthorized in phone P10 Lite Thanks @Alexxxx1
HwOTA8 method for rollback from EMUI 8 to Emui 5 - Huawei P10 lite Thanks @Alexxxx1
If you like my work, you can thank TeamMT PayPal
PPS: Sorry for my English!!!
used this to update my phone, to oreo... but no twrp works now, recovery fails to boot! so... no way to get root xD
Locked Bootloader
GizmoTheGreen said:
used this to update my phone, to oreo... but no twrp works now, recovery fails to boot! so... no way to get root xD
Click to expand...
Click to collapse
If you read the instructions, the bootloader will be locked after the process is completed, therefore, you're gonna have to unlock it and reflash the custom recovery that you had before
---------- Post added at 10:43 PM ---------- Previous post was at 10:11 PM ----------
vovan1982 said:
HwOTA for Huawei P10 Lite1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA.zip
PPS: Sorry for my English!!!
Click to expand...
Click to collapse
Hello!
I need your help with the update.bat file
When I try to execute the file, it just shows a cmd screen for a couple of seconds and nothing happens
what am I possibly doing wrong?
Plus, theres no instrutions for pluggin the phone into the PC, what I being doing its plug in it on bootloader mode
I hope you can understand me, english is not my mother language.
And thank you in advance
EDIT: Forget it man, I make it work, I just copied the HWOTA directory to C: and it works
So far i just used the update firmware option and everything is working
GizmoTheGreen said:
used this to update my phone, to oreo... but no twrp works now, recovery fails to boot! so... no way to get root xD
Click to expand...
Click to collapse
Hi, of couse, on Oreo not TWRP. TWRP from Nougat does not work.
kristoff_andxp said:
If you read the instructions, the bootloader will be locked after the process is completed, therefore, you're gonna have to unlock it and reflash the custom recovery that you had before
---------- Post added at 10:43 PM ---------- Previous post was at 10:11 PM ----------
Hello!
I need your help with the update.bat file
When I try to execute the file, it just shows a cmd screen for a couple of seconds and nothing happens
what am I possibly doing wrong?
Plus, theres no instrutions for pluggin the phone into the PC, what I being doing its plug in it on bootloader mode
I hope you can understand me, english is not my mother language.
And thank you in advance
EDIT: Forget it man, I make it work, I just copied the HWOTA directory to C: and it works
So far i just used the update firmware option and everything is working
Click to expand...
Click to collapse
Yes, I can understand you. You did the right thing, way to HwOTA as short as possible.
vovan1982 said:
Hi, of couse, on Oreo not TWRP. TWRP from Nougat does not work.
Click to expand...
Click to collapse
so need to wait for twrp port... ok ^^
kristoff_andxp said:
If you read the instructions, the bootloader will be locked after the process is completed, therefore, you're gonna have to unlock it and reflash the custom recovery that you had before
Click to expand...
Click to collapse
1. it was not locked. and even if it was I can easily unlock it.
2. I flashed the recovery succesfully, it just gives an error when trying to enter it
so, need new twrp for oreo...
GizmoTheGreen said:
so need to wait for twrp port... ok ^^
1. it was not locked. and even if it was I can easily unlock it.
2. I flashed the recovery succesfully, it just gives an error when trying to enter it
so, need new twrp for oreo...
Click to expand...
Click to collapse
The greater question is: can be the bootloader locked after Oreo update ?
Eurofighter_ty said:
The greater question is: can be the bootloader locked after Oreo update ?
Click to expand...
Click to collapse
Don't know, I'm not going to try
My Bootloader is Unlocked after successful installation.
But why my PC says the prone is PRA-LX1 instead of WAS-LX1?
GizmoTheGreen said:
Don't know, I'm not going to try
Click to expand...
Click to collapse
Did u relocked bootloader?
Alexxxx1 said:
Did u relocked bootloader?
Click to expand...
Click to collapse
no. it did not relock bootloader automatically and I want it unlocked. also afraid of brick if I lock it with this rom.
GizmoTheGreen said:
no. it did not relock bootloader automatically and I want it unlocked. also afraid of brick if I lock it with this rom.
Click to expand...
Click to collapse
Yes, with this method bootloader stay unlock same as on p10 plus, but if you can enter in stock recovery no afraid of any brick if you relock bootloader.
Poslato sa VKY-L29 uz pomoć Tapatoka
for anyone wondering, I solved Magisk installation on oreo!
use .app extractor to get the RAMDISK image, patch it with magisk app on the phone. then use fastboot to install to ramdisk partition, like so
Code:
fastboot flash ramdisk patched_image.img
hope this helps
GizmoTheGreen said:
for anyone wondering, I solved Magisk installation on oreo!
use .app extractor to get the RAMDISK image, patch it with magisk app on the phone. then use fastboot to install to ramdisk partition, like so
Code:
fastboot flash ramdisk patched_image.img
hope this helps
Click to expand...
Click to collapse
Did you try it? Someone said he wasn't able to do it.
Jaizu said:
Did you try it? Someone said he wasn't able to do it.
Click to expand...
Click to collapse
yes I have magisk working
now that I think about it I tried earlier with the kernel image as well, there is no "boot" image.
maybe you need to do both kernel and ramdisk images seperately
either way, magisk working here, I already replaced the emojis
GizmoTheGreen said:
yes I have magisk working
now that I think about it I tried earlier with the kernel image as well, there is no "boot" image.
maybe you need to do both kernel and ramdisk images seperately
either way, magisk working here, I already replaced the emojis
Click to expand...
Click to collapse
So, what's the first impressions of Emui 8?
Sent from my WAS-LX1 using Tapatalk
GizmoTheGreen said:
yes I have magisk working
now that I think about it I tried earlier with the kernel image as well, there is no "boot" image.
maybe you need to do both kernel and ramdisk images seperately
either way, magisk working here, I already replaced the emojis
Click to expand...
Click to collapse
Mind sharing patched .img files? What device model are you using?
GizmoTheGreen said:
so need to wait for twrp port... ok ^^
1. it was not locked. and even if it was I can easily unlock it.
2. I flashed the recovery succesfully, it just gives an error when trying to enter it
so, need new twrp for oreo...
Click to expand...
Click to collapse
On P10 Lite with Oreo worked TWRP with P Smart Oreo.
vovan1982 said:
On P10 Lite with Oreo worked TWRP with P Smart Oreo.
Click to expand...
Click to collapse
Got a link?
vovan1982 said:
On P10 Lite with Oreo worked TWRP with P Smart Oreo.
Click to expand...
Click to collapse
If you mean that: http://www.mediafire.com/file/icpfjhw9eysjlao/FIGO321.img (TWRP-3.2.1-0 for Huawei P Smart)
I've not test yet if it's fully comatible, but you can enter into TWRP and seems to works.
Reboot into fastboot and enter the command:
fastboot flash recovery_ramdisk FIGO321.img
recovery_ramdisk partition in Android 8 is the Recovery
Im trying to root my device by patching boot.img , but the issue is when i download 12.5.3.0 firmware its only 130mb zip file and it dosent contain boot.img, is there a place where i can download entire 12.5.3.0 rom so i can get boot.img ?
Also another question , im doing this because apparently ill still get OTA updates afterwards , is that true ?
shodibre said:
Im trying to root my device by patching boot.img , but the issue is when i download 12.5.3.0 firmware its only 130mb zip file and it dosent contain boot.img, is there a place where i can download entire 12.5.3.0 rom so i can get boot.img ?
Also another question , im doing this because apparently ill still get OTA updates afterwards , is that true ?
Click to expand...
Click to collapse
Updates work different for every other phone but its possible
here is a guide: by topjohmwu of magisk
Patching Images
If your device has boot ramdisk, you need a copy of the boot.img
If your device does NOT have boot ramdisk, you need a copy of the recovery.img.
You should be able to extract the file you need from official firmware packages or your custom ROM zip (if using one). If you are still having trouble, go to XDA-Developers and look for resources, guides, discussions, or ask for help in your device’s forum.
Copy the boot/recovery image to your device
Press the Install button in the Magisk card
If you are patching a recovery image, make sure “Recovery Mode” is checked in options.
In most cases it should already be automatically checked.
Choose “Select and Patch a File” in method, and select the stock boot/recovery image
The Magisk app will patch the image to [Internal Storage]/Download/magisk_patched_[random_strings].img.
Copy the patched image to your PC with ADB:
adb pull /sdcard/Download/magisk_patched_[random_strings].img
Flash the patched boot/recovery image to your device.
For most devices, reboot into fastboot mode and flash with command:
fastboot flash boot /path/to/magisk_patched.img or
fastboot flash recovery /path/to/magisk_patched.img if flashing a recovery image
Reboot and voila!
flairepathos.info said:
Updates work different for every other phone but its possible
here is a guide: by topjohmwu of magisk
Patching Images
If your device has boot ramdisk, you need a copy of the boot.img
If your device does NOT have boot ramdisk, you need a copy of the recovery.img.
You should be able to extract the file you need from official firmware packages or your custom ROM zip (if using one). If you are still having trouble, go to XDA-Developers and look for resources, guides, discussions, or ask for help in your device’s forum.
Copy the boot/recovery image to your device
Press the Install button in the Magisk card
If you are patching a recovery image, make sure “Recovery Mode” is checked in options.
In most cases it should already be automatically checked.
Choose “Select and Patch a File” in method, and select the stock boot/recovery image
The Magisk app will patch the image to [Internal Storage]/Download/magisk_patched_[random_strings].img.
Copy the patched image to your PC with ADB:
adb pull /sdcard/Download/magisk_patched_[random_strings].img
Flash the patched boot/recovery image to your device.
For most devices, reboot into fastboot mode and flash with command:
fastboot flash boot /path/to/magisk_patched.img or
fastboot flash recovery /path/to/magisk_patched.img if flashing a recovery image
Reboot and voila!
Click to expand...
Click to collapse
I understand this , but im having issue with finding download link for my firmware , my phone is on 12.5.3.0 version EU , but i cant find complete firmware anywhere , only OTA 130mb download.
shodibre said:
I understand this , but im having issue with finding download link for my firmware , my phone is on 12.5.3.0 version EU , but i cant find complete firmware anywhere , only OTA 130mb download.
Click to expand...
Click to collapse
12.5.3.0 version EU can be a number of phones
say Samsung Q10 12.5.3.0 version EU, Xiaomi P250 12.5.3.0 version EU thats how i know what phone you're using
Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40 are the devices in the thread
flairepathos.info said:
12.5.3.0 version EU can be a number of phones
say Samsung Q10 12.5.3.0 version EU, Xiaomi P250 12.5.3.0 version EU thats how i know what phone you're using
Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40 are the devices in the thread
Click to expand...
Click to collapse
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Thats the firmware , but its only OTA file , i cant find any FULL rom.
I found V12.5.3.0.rkhCNxm , which is chinese verison , i dont know if i can use boot.img from it ?
in the guide it says:
Copy the boot/recovery image to your device
dont brick your phone,
you can use recovery method
shodibre said:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Thats the firmware , but its only OTA file , i cant find any FULL rom.
I found V12.5.3.0.rkhCNxm , which is chinese verison , i dont know if i can use boot.img from it ?
Click to expand...
Click to collapse
I give up, all the best
flairepathos.info said:
in the guide it says:
Copy the boot/recovery image to your device
dont brick your phone,
you can use recovery method
I give up, all the best
Click to expand...
Click to collapse
Exactly , its just that boot/recovery image is not present in this OTA update file , i need 3gb FULL rom , but i cant find any download link for it
shodibre said:
Exactly , its just that boot/recovery image is not present in this OTA update file , i need 3gb FULL rom , but i cant find any download link for it
Click to expand...
Click to collapse
Dude... Choose what you need on the website
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Hi,
I don't know English and have a hard time understanding, I hope this is what you are looking for https://www.getdroidtips.com/xiaomi-poco-f3-stock-firmware/
shodibre said:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Thats the firmware , but its only OTA file , i cant find any FULL rom.
I found V12.5.3.0.rkhCNxm , which is chinese verison , i dont know if i can use boot.img from it ?
Click to expand...
Click to collapse
The "fastboot" version should work, there should be a boot.img inside.
Redmi K40 ChinaStableFastbootV12.5.6.0.RKHCNXM11.05.2 GB2021-08-13Download
kurtschmeichel said:
The "fastboot" version should work, there should be a boot.img inside.
Redmi K40 ChinaStableFastbootV12.5.6.0.RKHCNXM11.05.2 GB2021-08-13Download
Click to expand...
Click to collapse
I just completed all the steps , flashed patched boot img ,but there is no root , when i compare unpatched boot img and patched one they are exactly the same size to the bit, am i doing something wrong ?
i managed to root it !
Thank you everyone
In my opinion if you leave written how you did it might help others with the same problem.
Hey guys can someone please upload the boot.img from the FW V13.0.5.0.SKOEUXM?
I did a big mistake and thought that android 12 can boot in twrp (recovery). Flashed a wrong boot.img and cant get my phone working now. Only Fastboot is working - the normal Recovery didnt boot so i cant even install the Update through the orignal system recovery.
Cause theres only a Recovery zip of it online i cant use the MiFlash Tool, since a downgrade to Android 11 isnt possible
thanks a lot!
You can download the OTA zip file from Xiaomi firmware updater or by using the app MiuiDownloader from Playstore
Unzip, you will find payload.bin inside - use the PC tool (there is a thread on XDA) Payload_Dumper to dump boot.img and other images
Anyway, here is the link to the boot-stock-lisa_EEA_V13.0.5.0.SKOEUXM_12.0.img
I had extracted and renamed (name does not matter):
File on MEGA
mega.nz
oh god! thank you very much!
will test it in few minutes
edit: It worked instantly! you made my day
Can someone please upload the boot.img from V13.0.2.0(SKOMIXM) to root?
How to flash miui14 Chinese dev recovery rom in mipad 5
?
1. You download the CN Stable dev build from here
2. A. It's a recovery ROM zip, so you can only directly flash it in MIUI Updater, or MIUI Stock Recovery, if you are already on the same branch (CN Stable dev)
2. B. otherwise (you are on a different ROM variant, like Global or Stable non-dev) you have to unlock your tablet and then flash the recovery ROM zip via custom recovery (TWRP) or flash a fastboot ROM (which is not the same as the zip above) and flash it via MiFlash Tool, or adb from a computer.
Am in stable indian rom
Cant update through miui updater ?
Because last time changing China fastboot rom my device got bricked
Any other possible way ?
Twrp guide ?
underlines said:
1. You download the CN Stable dev build from here
2. A. It's a recovery ROM zip, so you can only directly flash it in MIUI Updater, or MIUI Stock Recovery, if you are already on the same branch (CN Stable dev)
2. B. otherwise (you are on a different ROM variant, like Global or Stable non-dev) you have to unlock your tablet and then flash the recovery ROM zip via custom recovery (TWRP) or flash a fastboot ROM (which is not the same as the zip above) and flash it via MiFlash Tool, or adb from a computeram i
Click to expand...
Click to collapse
drmagesh7 said:
Am in stable indian rom
Cant update through miui updater ?
Because last time changing China fastboot rom my device got bricked
Any other possible way ?
Twrp guide ?
Click to expand...
Click to collapse
WARNING: If you don't know how this stuff works, I recommend not to do it. This will install CN Stable Dev ROM, only English and Chinese will be available. Mi Flash gives an error but the Tablet reboots and MIUI 14 CN will be properly flashed without losing user-data. But to be sure, make a backup and learn how to fix a soft-bricked device BEFORE you start. If you soft-brick, don't ask questions here but google and learn through youtube tutorials.
unlock your device. Apply here
download the latest MIUI 14 chinese stable dev fastboot tgz file
extract the tgz with winRAR or 7zip into a folder
download and extract Mi Flash Tool into another folder
run XiaoMiFlash.exe inside the extracted Mi Flash Tool folder
Install the drivers when asked inside the Mi Flash Tool, if it gives an error then install the driver manually
Turn off your Mi Tab 5, then reboot it by pressing POWER + VOLUME UP until the Fastboot screen appears
Connect your Mi Tab 5 to your computer via USB.
Click the "refresh" button in Mi Flash Tool. In the table below the "select" button a new row should appear with an id and device. If not you have a USB driver problem, cable problem, your tablet is not in fastboot mode or other issue. Use google to fix your problem or watch a youtube video to learn how to do it.
in Mi Flash Tool click the "select" button and navigate to the folder where you extracted the tgz file, click OK. (Make sure you navigate and select the "nabu_images_V14.0.22.12.21.DEV_13.0" folder, and not the one inside it called "images")
At the bottom of Mi Flash Tool select "Save user data"and in the drop down next to it select "Flash all except storage"
Click the "flash" button in Mi Flash Tool and wait until it's done.