Develop Bugs

[RECOVERY][UNOFFICIAL] TWRP 3.3.1-7 Magisk Prepatched ONLY FOR (ROOTED S10+EXYNOS)

After flashing this there is no need to press that key combo (VOL up key + Power + Bixby) to boot into Magisk mode. Just after flashing this image your S10+ will automatically boot up in the Magisk mode. And that key combo (VOL up key + Power + Bixby) will be used to boot your phone directly into recovery mode.
Download : PrePatched TWRP S10+http://www.mediafire.com/file/uq378oaeb6s80hc/Prepatched_Twrp_S10%2B.zip/file
DISCLAIMER : FLASH AT YOUR OWN RISK AND I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE.
IF MY POST IS USEFUL FOR YOU THEN KINDLY PRESS THE THANKS BUTTON
Special Thanks To : All credit goes to @ianmacd For his amazing Work for Twrp and Latest unofficial magisk for S10 family & TWRP Team &
@topjohnwu for his work for Magisk

Installation Instructions for the Rooted Users : Before Installing Kindly Make a Backup Of Your Phone and Internal storage
1. Requires Root : Download The Image File From The Above Download Link. Place It In The Root Of Your /sdcard folder .
2. Run The Following Commands Via Adb Shell
3. After Installation Do Wipe Your Internal storage and Do Not Factory Reset Your Phone Otherwise It Will Cause BOOTLOOP
su
dd if=/sdcard/twrp.img of=/dev/block/platform/13d60000.ufs/by-name/recovery
Click to expand...
Click to collapse

S10+ Exynos or Snapdragon ? or work for both ?

for s10 + exynos version

Just 3 things i wanna ask.
1. But you didnt mention twrp version?
2. Even if we already are on twrp' latest version we need to wipe because its prepatched?
3. We shouldnt ever factory reset or just after first installation? But we can factory reset from settings?

1. Latest Twrp 3.3.1-7
2. if you have a twrp installed then kindly do not flash it.
3. Kindly make a backup from twrp recovery before making a factory reset in case any thing goes wrong

Sorry for such a rudimentary question but are the adb commands done individually after "su" or is that one command line too long to fit in the box? Sorry, I've just been fighting with getting twrp on my phone since last night. Root works fine but after flashing patched img file I can never get it to go into twrp. Always goes to stock recovery even though flash is successful. I originally thought I was messing up the key combo but I have my suspicions. Any help would be greatly appreciated. Thanks

jtford said:
Sorry for such a rudimentary question but are the adb commands done individually after "su" or is that one command line too long to fit in the box? Sorry, I've just been fighting with getting twrp on my phone since last night. Root works fine but after flashing patched img file I can never get it to go into twrp. Always goes to stock recovery even though flash is successful. I originally thought I was messing up the key combo but I have my suspicions. Any help would be greatly appreciated. Thanks
Click to expand...
Click to collapse
UPDATE××Got TWRP to boot the first time. First time system booted fine but I lost root. Did a fresh root per magisk install guide and reflashed twrp.img in root shell. Got twrp to boot again but it continues to boot loop. I only wiped internal with no factory reset. I know it's probably something I'm doing. Any suggestions?

jtford said:
UPDATE××Got TWRP to boot the first time. First time system booted fine but I lost root. Did a fresh root per magisk install guide and reflashed twrp.img in root shell. Got twrp to boot again but it continues to boot loop. I only wiped internal with no factory reset. I know it's probably something I'm doing. Any suggestions?
Click to expand...
Click to collapse
It seems magisk not installed properly. Download latest firmware from Carotix folder Here it have prepatched recovery prepatched ap you need not to do anything you need to reflash recovery n system ...use odin flash patched ap cp bl and use HOME_CSC (you will not use any data apps or anything) Just flash using odin everything will work fine.
also download multidisabler from ian's multidisabler thread HERE put it in phone as need to flash after boot into Twrp!
instructions copied from Carotix thread
Download 4 files from OTA/ODIN FILES then follow this guide:
and put the last Multidisabler in your phone
1- Turn off the device and put it in download mode with the bixby / vol down button and inserting the cable to the PC at this point open Odin remove the check mark from autoreboot
2- Load the AP .tar file downloaded from OTA together with the BL the CP and the HOME_CSC .... if you put the CSC you lose all the data
3- Start the flash and wait
4- At the end you disconnect the phone from the cable and with the power / vol down keys force the switch off as soon as the screen goes black press vol + / bixby / power to go in recovery and don't leave the keys until you see the twrp screen, continue to keep the 3 keys pressed and wait for the recovery to start again
5- Flash the multidisabler then from the main screen choose recovery reboot to boot rooted/magisk system.

comsite said:
It seems magisk not installed properly. Download latest firmware from Carotix folder Here it have prepatched recovery prepatched ap you need not to do anything you need to reflash recovery n system ...use odin flash patched ap cp bl and use HOME_CSC (you will not use any data apps or anything) Just flash using odin everything will work fine.
also download multidisabler from ian's multidisabler thread HERE put it in phone as need to flash after boot into Twrp!
instructions copied from Carotix thread
Download 4 files from OTA/ODIN FILES then follow this guide:
and put the last Multidisabler in your phone
1- Turn off the device and put it in download mode with the bixby / vol down button and inserting the cable to the PC at this point open Odin remove the check mark from autoreboot
2- Load the AP .tar file downloaded from OTA together with the BL the CP and the HOME_CSC .... if you put the CSC you lose all the data
3- Start the flash and wait
4- At the end you disconnect the phone from the cable and with the power / vol down keys force the switch off as soon as the screen goes black press vol + / bixby / power to go in recovery and don't leave the keys until you see the twrp screen, continue to keep the 3 keys pressed and wait for the recovery to start again
5- Flash the multidisabler then from the main screen choose recovery reboot to boot rooted/magisk system.
Click to expand...
Click to collapse
Thanks for your help. I had to do it a little unconventional to get it working. None of the prepatched recoveries that are included in all these firmware downloads would work for me using Odin. Only flashing this twrp.img in a root shell would work. I finally just flashed Beyond rom zip after getting into twrp along with the disabler zip. Boots into rooted system with no problems and I can boot into twrp with no problems as well. Oh yea, I flashed Beyond over ASG8 also. Not sure why I could never get ASH6 to work.

[RECOVERY] TWRP 3.3.1 Changelog
v3.3.1-9_ianmacd for G97[035]F [inc. ASH6 kernel (which also works with ASH1 firmware)] (2019-09-17)
Restore working MTP functionality to TWRP. With thanks to bigbiff for the reference and to Geiti for his commit embodying the same fix.
v3.3.1-8_ianmacd for G97[035]F [inc. ASH6 kernel (which also works with ASH1 firmware)] (2019-09-06)
Kernel rebased on Samsung's ASH6 source code.
[System-as-root] MultidisablerChange log
v1.6 (2019-09-18)
Add support for more variants of A50: A505([YG]N|G).
Fix A205G detection.

Hello kkrraazzyy,
can you please explain how to install your twrp.
I already habe twrp installed. an this rom. --> https://forum.xda-developers.com/s10-plus/development/rom-carhdrom-1-t3938987
But a want to install your twrp to boot always with Magisk without to press any key.
I need your help please.

Any proper YouTube guide video for these things, as flashing/rooting became so complicated with so many steps.... Thank you!

So from my understanding this is the first and only way to have the phno boot into the patched recovery automatically without needing top physically press the button combo? Or have I missed something Was just expecting there to have been a lot more attention that's all.
This has actually what has been one of the main reasons holding me back from rooting as it reminds me back in the day of tethered and untethered jailbreaks for iPhones.
Except that this is just a inconvenience while tethered would make the phone practically unusable.

Is there an app i can use to backup and restore my kik chats? I got a new phone, a Samsung Galaxy 10+ and want to tramsfer my kik chats and save data for Digimon Heroes! to my new galaxy 10+ i dont have root on either phones is there a app (apk) or one i can downlod on my laptop to make the backup of them so i can bring them over. Please i only have a dew days left to transfer my number over and have my old phone shut dwn by my previous provider. I need to do it on the next 2 days.

qaz015393 said:
Is there an app i can use to backup and restore my kik chats? I got a new phone, a Samsung Galaxy 10+ and want to tramsfer my kik chats and save data for Digimon Heroes! to my new galaxy 10+ i dont have root on either phones is there a app (apk) or one i can downlod on my laptop to make the backup of them so i can bring them over. Please i only have a dew days left to transfer my number over and have my old phone shut dwn by my previous provider. I need to do it on the next 2 days.
Click to expand...
Click to collapse
Use Smart Switch by Samsung, it includes the possibility of transferring all your data and settings using a USB cable. I transferred everything from my old phone to this one (S10+ SM-G975F). I don't know if it will work on non-Samsung devices, but it's worth a try.

I have android 10 on my s10+, will this twrp work with android q?

possible to boot without root permissions too?

:good:

Hi @kkrraazzyy , could you show us how you did it?
because @ianmacd https://forum.xda-developers.com/ga...covery-twrp-3-3-0-galaxy-s10-exynos-t3924856/
latest version does not seem to provide this awesome function.

[Guide] Root Galaxy A10 Magisk prenormal rmm/kg state (October Patch- later)

Hi All this is just a quick tutorial to help you all root your devices, on later firmwares
This 100% works ive done it over and over without any problems. I am currently on october patch latest firmware for my A105FN. As you may know Samsung have now added extra security meaning even if you have already unlocked your bootloader after you patch the firmware with magisk, flash patched firmware and reboot you will be greeted with that dreadfull message, Only official binaries allowed and your device will be locked and wont boot untill you reflash stock firmware again. The below will help get you out of the prenormal kg state, and save's you a 7 days waiting period as we dont have any TWRP available for our device at this time. Also note due to the extra security magisk cant be flashed with the whole firmware no more, as each time you flash the firmware your back at square 1.
Note: You will need 7-zip - google is your freind
1. Download odin: https://odindownloader.com/download/odin3-v3-13-3.
2. download the latest stock firmware for your device via SamMobile
3. Download latest Magisk Manager - https://www.google.co.uk/amp/s/forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445/amp/
4. Flash latest firmware via odin and let device boot up and finish setting up.
5. Grab Your Firmware AP_A105FXXXX.tar.md5 remove the md5 so its a tar file makes it easier to work with. Copy it to your device storage.
6. Install latest magisk manager, and open check advanced settings to make sure recovery is checked, select install image / patch image and select the AP file you put on your device, magisk will patch and save as magisk_patched on your internal storage. Copy this back to your pc and extract it.
7. Download this https://forum.xda-developers.com/attachment.php?attachmentid=4818715&d=1568308074 thanks to @droidzer1 and extract the vbmeta.img.
8. Make a new folder on you pc it's temporary so you know where your files are. From the Ap magisk_patch.tar you extracted, copy the boot.img, recovery.img, and the downloaded vbmeta.img from step 7. And place them in the new folder you created, using your mouse select all 3 and right click select 7-zip add to archive, select tar format and name it magisk.tar.
9. Now we have all the files ready back to your device, if your bootloader is already unlocked skip this step and move to the next. For those that havent unlocked there bootloader go to settings - about phone - Software Information - tap multiple times on "Build number" - This will open developer option.
Now in settings at the end, you will have new option "Developer options" - look for OEM unlocking - Enable it, if the OEM switch is not there proceed to step 10. If it is and you enabled it it might ask you to factory reset if not it will be this way to complete the unlock bootloader.......
switch off your device and reboot to download mode.
To put device in download mode - Press Volume Up & then Press Volume Down (Keep holding both) and connect device to PC with USB cable
When device start to download mode, long press volume up to unlock the bootloader. This will wipe your data and automatically reboot.
10. Remove any account you have on your device go to settings, look for time and date automatic time zones, turn it off and set date back 8 days from now (example 30th today change date to 22nd) restart device. Now go straight back into automatic time zones settings and turn it back on. Again reboot device, when device reboots turn it off. You can now enter download mode and it should say checking instead of prenormal that means you good to go. Those of you that had no OEM switch in developer mode please now check.... if it's there enable it and go back to step 10 unlocking bootloader then proceed to step 11.
11. Open odin and select in the ap tab the magisk.tar you created earlier. Plug in your usb whilst holding vol-up and vol-down together to boot into download, press vol-up to proceed. Press start on odin and soon as it finishes and device reboots and you see the bootloader message hold power and vol-up until into stock recovery, select wipe factory reset then select reboot device, this the same as soon as you see bootloader unlocked message hold power and the vol-up together this time count to 7.... and release. Phone wont boot it will go blackscreen and reboot, dont worry this is normal, again do the exact same at bootloader unlocked msg screen hold power and vol-up count to 7... release, now phone will boot and you can set it up.
Note: you will need to reinstall magisk manager and on 1st open it will ask do to additional setup, let it do its thing, then device will reboot,
Remeber every time your device reboots you will have to do the power and vol-up to boot system with root.
I hope this guide help you and a big thank you to @afaneh92 for his original guide

thnaks man
how do i install twrp?
if it is possible, can i flash GSI?

tttt7hhhhjjjk said:
thnaks man
how do i install twrp?
if it is possible, can i flash GSI?
Click to expand...
Click to collapse
No the twrp that was made for our device, wont work with new versions of magisk, or any newer firmware we are going to have to wait until the the new kernel source is released by samsung unfortunatly, its impossible to say when or if they do.... so its just root for now.

mikeyb123 said:
No the twrp that was made for our device, wont work with new versions of magisk, or any newer firmware we are going to have to wait until the the new kernel source is released by samsung unfortunatly, its impossible to say when or if they do.... so its just root for now.
Click to expand...
Click to collapse
thanks for the fast reply man :good:

I gave up rooting this phone, ended up bootloop 3 times and always has to flash it to get the phone working again

timba123 said:
Any chimeratool tricks for no oem unlocking in developer options? On a102u1
Click to expand...
Click to collapse
no.. chimera tool cant unlock the bl on usa variants

hello Thanks for this method but not working after install again magisk manager , say app magisk is not installed and not root
When I was creating the magisk_patch file with magisk manager go to advanced settings and check recovery mode
is it correct?

[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)

[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)
Step by Step: How to Root & Flash TWRP on Samsung Galaxy Note 10(+) and Every other Galaxy from S10 and up (SnapDragon Only)
Update: If You Want To Unlock Your Bootloader go here: U.S. Samsung Galaxy Bootloader Unlock Service
So You Figured Out How to Unlock The Bootloader on your Shiny New/Old (Snapdragon) Samsung Galaxy Thing-a-ma-jig
Good on you, but now you want to figure out how to Root properly and enjoy the spoils of said Unlock. Well You've come to right place.
DO NOT QUOTE THE OP PLEASE, (If you would like to place this guide in your respective Device Threads ie. Galaxy s10, s20, s20 Note 20 Ultra 5g etc. thats perfectly fine)
Welcome: Be nice, be courteous and *enjoy
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with unrooting, some functions may never.
- All your data on device will be lost (Factory Reset is in the Instructions below)
- Flashing custom binaries may brick (Usually it's a soft but can be hard brick too), so follow it on your own risk!
Now that you accept the risks, let's have some fun -
Important: Although this is a simple guide you must follow all directions clearly
Simple guide to root your device and install TWRP after unlock: (Thanks to @Krog18 )
1. Download vbmeta_disabled.tar, TWRP for your device, magisk and multidisabler-samsung-2.6-afaneh92
2. Reboot to download mode and flash vbmeta_disabled.tar in ap slot and reboot. Device will reboot to recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
3. Uncheck auto reboot in Odin and flash TWRP in ap slot.
4. Hold volume down and power until the screen goes black then immediately switch to holding volume up, Bixby button (10 series only) and power to reboot into TWRP
5. Flash multidisabler and reboot recovery
6. Go to wipe, format and type yes to format data
7. Flash magisk
8. Make a backup of efs and store it somewhere safe
9. Reboot
*First boot may take 10-15 minutes. If it doesn't boot in 15 minutes, force reboot by holding power and volume down for at least 10 seconds
Additional Method For Rooting If Above method did not work for you:
Step 1 : (Root Base Firmware with Magisk By patching files yourself, Then Flash TWRP in Odin)
Prepare Firmware files for root
You need to Patch AP File to flash using Odin to root device.
1. Download stock firmware for your device ie (SM-N975U/U1, SM-G973U/U1, SM-G975U/U1)
You need to download file according your region and model.
2. Once you finish download, extract files and keep all files on in a folder on the desktop of PC. From extracted files find the file with name AP_[device_model_sw_ver].tar.md5 copy to your Phone.
3.Download Latest Magisk Manager and Install to your device (Make sure to check for updates) (Optionally go into settings and switch the update channel to BETA)
4.Open Magisk Manager - Find Magisk Install (Top One) - Click Install - select to "Select and Patch file" - Click the AP file you have copied to your device (AP_[device_model_sw_ver].tar.md5)
5.Magisk Manager will patch the entire firmware file and output the newly Patched AP file to [Internal Storage]/Download/magisk_patched.tar
6.Now Copy patched AP file magisk_patched.tar back to Your PC
7.Download latest Odin and extract to Desktop on your PC
Step 2. Installing custom firmware files with Odin
1. Reboot to download mode and select volume up to continue:
2. Open Odin (as administrator) {Right-Mouse click--Open As Administrator}
Select AP in Odin and use the magisk_patched.tar file you have patched {The file you just patched with Magisk} for AP tab of Odin
Select BL,CP and CSC files (Use the files from the firmware you downloaded earlier) (This is VERY important, DON'T just flash only the magisk_patched.tar)
(Use All of the respective files BL, CP, CSC)
3.From Odin option - uncheck Auto Reboot option (I do this because I like rebooting when I'm ready)
4. Make sure all files are in the right place, Now Hit Start and wait till it's completely finish. When It shows PASS in Odin, disconnect device.
Okay Now the hard part is over, you can let the phone boot to system and Skip all Setup Steps because Next is TWRP.
Step 3. Odin: Flash Twrp and Boot with Magisk
Very Simple yet very Important:
1. Download the respective TWRP (Twrp<version_number>.TAR for you phone model (This is going to Odin flashed so you need .TAR file)
2. Reboot your phone into Download Mode, Hold Vol- and Power Button until it gets to DL Screen and press up for "Yes"
3. Put the Twrp<version_number>.TAR in the AP slot
4. Make sure the file is selected, (Unselect Auto-reboot in options tab in Odin) and in place and hit Start
5. Wait until it's finished, Now Hold Vol- and Power until you see black screen, release and then hold Vol+ and Power until you see TWRP recovery
Now Flash Multidisabler and Magisk
1. Flash multidisabler (Mega) (Google Drive) and reboot back to TWRP
2. Wipe data and storage
3. Flash Latest Magisk
*Enjoy
*** Remember: Make a backup of EFS through TWRP and save it to your desktop or Cloud service ie. MEGA, GDrive, Dropbox ****

Please I can't seem to unlock my bootloader because OEM Unlocking functionality is missing on my device. I have tried and still can't find it. Can I root the device without Unlocking the bootloader?

stylemonument said:
Please I can't seem to unlock my bootloader because OEM Unlocking functionality is missing on my device. I have tried and still can't find it. Can I root the device without Unlocking the bootloader?
Click to expand...
Click to collapse
If you could just download and install Telegram app and PM this guy on there (drivel2787)
Please see here: Bootloader Unlock Service For US Variants

BoiBundy said:
If you could just download and install Telegram app and PM this guy on there (drivel2787)
Click to expand...
Click to collapse
Okay.... let me do that. Thanks.

Maybe should include that US Snapdragon will have to get their bootloader unlocked first and how they do..include Telegram. Or your probably going to constantly get the "I can't find OEM unlock" question.
Sent from my SM-N975U using Tapatalk

Msgd re: oem unlock! Btw, if we got any awesome Sam sec experts out there who wouldn’t mind entertaining some qs from me regarding a lot of WEIRD stuff happening w my phone, be eternally grateful. Could even work out a monetary deal for your time, and (perhaps) help!
Thanks much in adv, msg on telegram as @nemotheDreamer.

butchieboy said:
Maybe should include that US Snapdragon will have to get their bootloader unlocked first and how they do..include Telegram. Or your probably going to constantly get the "I can't find OEM unlock" question.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
You might be right, I will edit it tonight

So we can legit root the Snapdragon version now?

Nickdroid86 said:
So we can legit root the Snapdragon version now?
Click to expand...
Click to collapse
Yes, it's been going on now for a few months. I've done it myself. It's completely legit
---------- Post added at 09:49 AM ---------- Previous post was at 09:47 AM ----------
Nice Tut BoiBundy, well written.

cerj said:
Yes, it's been going on now for a few months. I've done it myself. It's completely legit
---------- Post added at 09:49 AM ---------- Previous post was at 09:47 AM ----------
Nice Tut BoiBundy, well written.
Click to expand...
Click to collapse
Thanks man, wanted to have a central "fool-proof" way for people to enjoy the freedom of root

Just to be clear - I need to pay to get my bootloader unlocked? That's still the case, right?

MonkeyJug said:
Just to be clear - I need to pay to get my bootloader unlocked? That's still the case, right?
Click to expand...
Click to collapse
Check Here: https://forum.xda-developers.com/t/sampwnd-usa-model-bl-unlock-info-u-u1-w.4201689/

I've been on Nexus and Pixel devices so long now I cannot remember much about modification on Samsung devices. Last one I had rooted was the Note 2. Anyway, bootloader unlocked and successfully rooted my SM-N975U (Note 10+). Now there are updates available so I am sorry if this isn't the place or if a dumb question, but is there any special way I need to do updates on the snapdragon so I don't relock the bootloader or lose root? With Pixel, ADB sideload was easy, not sure with this one.

Is there a multi disabler package that is compatible with the SM-N976V ? I have tried multiple iterations of multidisabler-samsung-2.6c-afaneh92 but am have trouble.

nabnab25658 said:
Is there a multi disabler package that is compatible with the SM-N976V ? I have tried multiple iterations of multidisabler-samsung-2.6c-afaneh92 but am have trouble.
Click to expand...
Click to collapse
I was in the same boat, went to the telegram channel and the guy who made that file added support for 976V. Not sure where else it's available, but you should be able to get it there from Mohammad.
TWRP for S20/N20/TabS7/ZFold2 (Snapdragon)
t.me

Dick_Stickitinski said:
I was in the same boat, went to the telegram channel and the guy who made that file added support for 976V. Not sure where else it's available, but you should be able to get it there from Mohammad.
TWRP for S20/N20/TabS7/ZFold2 (Snapdragon)
t.me
Click to expand...
Click to collapse
Hey, just wanted to thank you for pointing me in the right direction. I've had my Sm-976V BL unlocked and rooted for a bit now, but have been busy hence the late reply.

I have an issue. I boot into TWRP just fine but all my files in sdcard are nothing but random numbers and letters

I think this happens when you don't wipe your data. You also need to flash a decryption file. It happened to me at first because I didn't wipe all data.[/QUOTE]

BoiBundy said:
[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)
Step by Step: How to Root & Flash TWRP on Samsung Galaxy Note 10(+) and Every other Galaxy from S10 and up (SnapDragon Only)
Update: If You Want To Unlock Your Bootloader go here: U.S. Samsung Galaxy Bootloader Unlock Service
So You Figured Out How to Unlock The Bootloader on your Shiny New/Old (Snapdragon) Samsung Galaxy Thing-a-ma-jig
Good on you, but now you want to figure out how to Root properly and enjoy the spoils of said Unlock. Well You've come to right place.
DO NOT QUOTE THE OP PLEASE, (If you would like to place this guide in your respective Device Threads ie. Galaxy s10, s20, s20 Note 20 Ultra 5g etc. thats perfectly fine)
Welcome: Be nice, be courteous and *enjoy
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with unrooting, some functions may never.
- All your data on device will be lost (Factory Reset is in the Instructions below)
- Flashing custom binaries may brick (Usually it's a soft but can be hard brick too), so follow it on your own risk!
Now that you accept the risks, let's have some fun -
Important: Although this is a simple guide you must follow all directions clearly
Simple guide to root your device and install TWRP after unlock: (Thanks to @Krog18 )
1. Download vbmeta_disabled.tar, TWRP for your device, magisk and multidisabler-samsung-2.6-afaneh92
2. Reboot to download mode and flash vbmeta_disabled.tar in ap slot and reboot. Device will reboot to recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
3. Uncheck auto reboot in Odin and flash TWRP in ap slot.
4. Hold volume down and power until the screen goes black then immediately switch to holding volume up, Bixby button (10 series only) and power to reboot into TWRP
5. Flash multidisabler and reboot recovery
6. Go to wipe, format and type yes to format data
7. Flash magisk
8. Make a backup of efs and store it somewhere safe
9. Reboot
*First boot may take 10-15 minutes. If it doesn't boot in 15 minutes, force reboot by holding power and volume down for at least 10 seconds
Additional Method For Rooting If Above method did not work for you:
Step 1 : (Root Base Firmware with Magisk By patching files yourself, Then Flash TWRP in Odin)
Prepare Firmware files for root
You need to Patch AP File to flash using Odin to root device.
1. Download stock firmware for your device ie (SM-N975U/U1, SM-G973U/U1, SM-G975U/U1)
You need to download file according your region and model.
2. Once you finish download, extract files and keep all files on in a folder on the desktop of PC. From extracted files find the file with name AP_[device_model_sw_ver].tar.md5 copy to your Phone.
3.Download Latest Magisk Manager and Install to your device (Make sure to check for updates) (Optionally go into settings and switch the update channel to BETA)
4.Open Magisk Manager - Find Magisk Install (Top One) - Click Install - select to "Select and Patch file" - Click the AP file you have copied to your device (AP_[device_model_sw_ver].tar.md5)
5.Magisk Manager will patch the entire firmware file and output the newly Patched AP file to [Internal Storage]/Download/magisk_patched.tar
6.Now Copy patched AP file magisk_patched.tar back to Your PC
7.Download latest Odin and extract to Desktop on your PC
Step 2. Installing custom firmware files with Odin
1. Reboot to download mode and select volume up to continue:
2. Open Odin (as administrator) {Right-Mouse click--Open As Administrator}
Select AP in Odin and use the magisk_patched.tar file you have patched {The file you just patched with Magisk} for AP tab of Odin
Select BL,CP and CSC files (Use the files from the firmware you downloaded earlier) (This is VERY important, DON'T just flash only the magisk_patched.tar)
(Use All of the respective files BL, CP, CSC)
3.From Odin option - uncheck Auto Reboot option (I do this because I like rebooting when I'm ready)
4. Make sure all files are in the right place, Now Hit Start and wait till it's completely finish. When It shows PASS in Odin, disconnect device.
Okay Now the hard part is over, you can let the phone boot to system and Skip all Setup Steps because Next is TWRP.
Step 3. Odin: Flash Twrp and Boot with Magisk
Very Simple yet very Important:
1. Download the respective TWRP (Twrp<version_number>.TAR for you phone model (This is going to Odin flashed so you need .TAR file)
2. Reboot your phone into Download Mode, Hold Vol- and Power Button until it gets to DL Screen and press up for "Yes"
3. Put the Twrp<version_number>.TAR in the AP slot
4. Make sure the file is selected, (Unselect Auto-reboot in options tab in Odin) and in place and hit Start
5. Wait until it's finished, Now Hold Vol- and Power until you see black screen, release and then hold Vol+ and Power until you see TWRP recovery
Now Flash Multidisabler and Magisk
1. Flash multidisabler (Mega) (Google Drive) and reboot back to TWRP
2. Wipe data and storage
3. Flash Latest Magisk
*Enjoy
*** Remember: Make a backup of EFS through TWRP and save it to your desktop or Cloud service ie. MEGA, GDrive, Dropbox ****
Click to expand...
Click to collapse
which TWRP version to flash and which odin? hope i can get answer i had N975U1 unlocked bootloader

Anyone else getting that pesky "Android 11 Update" since they have rooted? I keep postponing it. I'm guessing it will fail if I try to install. Not sure what I should do.
Sammobile don't seem to have the firmware available yet. I was thinking installing it with odin then patching AP with Magisk

BoiBundy said:
[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)
Step by Step: How to Root & Flash TWRP on Samsung Galaxy Note 10(+) and Every other Galaxy from S10 and up (SnapDragon Only)
Update: If You Want To Unlock Your Bootloader go here: U.S. Samsung Galaxy Bootloader Unlock Service
So You Figured Out How to Unlock The Bootloader on your Shiny New/Old (Snapdragon) Samsung Galaxy Thing-a-ma-jig
Good on you, but now you want to figure out how to Root properly and enjoy the spoils of said Unlock. Well You've come to right place.
DO NOT QUOTE THE OP PLEASE, (If you would like to place this guide in your respective Device Threads ie. Galaxy s10, s20, s20 Note 20 Ultra 5g etc. thats perfectly fine)
Welcome: Be nice, be courteous and *enjoy
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with unrooting, some functions may never.
- All your data on device will be lost (Factory Reset is in the Instructions below)
- Flashing custom binaries may brick (Usually it's a soft but can be hard brick too), so follow it on your own risk!
Now that you accept the risks, let's have some fun -
Important: Although this is a simple guide you must follow all directions clearly
Simple guide to root your device and install TWRP after unlock: (Thanks to @Krog18 )
1. Download vbmeta_disabled.tar, TWRP for your device, magisk and multidisabler-samsung-2.6-afaneh92
2. Reboot to download mode and flash vbmeta_disabled.tar in ap slot and reboot. Device will reboot to recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
3. Uncheck auto reboot in Odin and flash TWRP in ap slot.
4. Hold volume down and power until the screen goes black then immediately switch to holding volume up, Bixby button (10 series only) and power to reboot into TWRP
5. Flash multidisabler and reboot recovery
6. Go to wipe, format and type yes to format data
7. Flash magisk
8. Make a backup of efs and store it somewhere safe
9. Reboot
*First boot may take 10-15 minutes. If it doesn't boot in 15 minutes, force reboot by holding power and volume down for at least 10 seconds
Additional Method For Rooting If Above method did not work for you:
Step 1 : (Root Base Firmware with Magisk By patching files yourself, Then Flash TWRP in Odin)
Prepare Firmware files for root
You need to Patch AP File to flash using Odin to root device.
1. Download stock firmware for your device ie (SM-N975U/U1, SM-G973U/U1, SM-G975U/U1)
You need to download file according your region and model.
2. Once you finish download, extract files and keep all files on in a folder on the desktop of PC. From extracted files find the file with name AP_[device_model_sw_ver].tar.md5 copy to your Phone.
3.Download Latest Magisk Manager and Install to your device (Make sure to check for updates) (Optionally go into settings and switch the update channel to BETA)
4.Open Magisk Manager - Find Magisk Install (Top One) - Click Install - select to "Select and Patch file" - Click the AP file you have copied to your device (AP_[device_model_sw_ver].tar.md5)
5.Magisk Manager will patch the entire firmware file and output the newly Patched AP file to [Internal Storage]/Download/magisk_patched.tar
6.Now Copy patched AP file magisk_patched.tar back to Your PC
7.Download latest Odin and extract to Desktop on your PC
Step 2. Installing custom firmware files with Odin
1. Reboot to download mode and select volume up to continue:
2. Open Odin (as administrator) {Right-Mouse click--Open As Administrator}
Select AP in Odin and use the magisk_patched.tar file you have patched {The file you just patched with Magisk} for AP tab of Odin
Select BL,CP and CSC files (Use the files from the firmware you downloaded earlier) (This is VERY important, DON'T just flash only the magisk_patched.tar)
(Use All of the respective files BL, CP, CSC)
3.From Odin option - uncheck Auto Reboot option (I do this because I like rebooting when I'm ready)
4. Make sure all files are in the right place, Now Hit Start and wait till it's completely finish. When It shows PASS in Odin, disconnect device.
Okay Now the hard part is over, you can let the phone boot to system and Skip all Setup Steps because Next is TWRP.
Step 3. Odin: Flash Twrp and Boot with Magisk
Very Simple yet very Important:
1. Download the respective TWRP (Twrp<version_number>.TAR for you phone model (This is going to Odin flashed so you need .TAR file)
2. Reboot your phone into Download Mode, Hold Vol- and Power Button until it gets to DL Screen and press up for "Yes"
3. Put the Twrp<version_number>.TAR in the AP slot
4. Make sure the file is selected, (Unselect Auto-reboot in options tab in Odin) and in place and hit Start
5. Wait until it's finished, Now Hold Vol- and Power until you see black screen, release and then hold Vol+ and Power until you see TWRP recovery
Now Flash Multidisabler and Magisk
1. Flash multidisabler (Mega) (Google Drive) and reboot back to TWRP
2. Wipe data and storage
3. Flash Latest Magisk
*Enjoy
*** Remember: Make a backup of EFS through TWRP and save it to your desktop or Cloud service ie. MEGA, GDrive, Dropbox ****
Click to expand...
Click to collapse
it works on my N975U1 android 10 Q version 1st method so no need 2nd method

TWRP + Root Magisk OneUi 3.1 (Android 11)

Any process step by step about how to install TWRP and MAGISK in Galaxy A70 with android 11 (OneUi 3.1)?
I've tryed with the same files and method that i have done with the Android 10 (OneUi 2.5 version) and i can't start in twrp to flash Magisk
And with the metod of install via Odin without Magisk give's me a bootloop
Anyone knows about this process and can help me please?

alanz0r said:
Any process step by step about how to install TWRP and MAGISK in Galaxy A70 with android 11 (OneUi 3.1)?
I've tryed with the same files and method that i have done with the Android 10 (OneUi 2.5 version) and i can't start in twrp to flash Magisk
And with the metod of install via Odin without Magisk give's me a bootloop
Anyone knows about this process and can help me please?
Click to expand...
Click to collapse
This method from @MarvinMod works on Android 11 (i have Android 11 with root):
Root stock android 10 with TWRP and Magisk-
1- With the device off, hold vol up and power till the device turns on. in stock recovery, choose wipe and factory reset. Then reboot. setup using wifi or data and skip as much as possible. open developer options and make sure oem unlock is checked and power off the device.
2- Hold vol up and vol down while plugging device into PC. on the bootloader splash screen, hit vol up to enter download mode.
3- Open odin and uncheck auto reboot in the options tab. Click AP, then add Recovery.tar and click start. You should get a green pass in odin when complete. this next step is tricky so pay attention.
4- Remove the cable then Hold vol down and power till the device screen goes blank, as soon as it does immediately release all keys then press and hold vol up till the warning about unlocked bootloader appears. TWRP should boot.
5- Copy DFE to external sdcard. In Twrp click install, select storage, choose micro sd and then choose DFE then slide right to confirm and install. when complete, go back to the main screen in TWRP.
6- Click wipe, click format data, type yes and click the blue check box in lower right corner. back out and click reboot, click system, click do not install.
7-Setup device as you normally would and make sure to enable dev options. now turn off the device and boot into twrp. (vol up and power till bootloader warning.)
8- Copy Magisk to sdcard, In Twrp click install and choose Magisk, slide right to confirm, Magisk will now install.
9- Click reboot system and choose do not install. The device will reboot and you should now have Magisk in your apps, make sure to update it. If its not there, wait a few minutes and it should pop up.
Congrats, you should now have TWRP and Magisk on rooted stock rom android 10.

kac222 said:
This method from @MarvinMod works on Android 11 (i have Android 11 with root):
Root stock android 10 with TWRP and Magisk-
1- With the device off, hold vol up and power till the device turns on. in stock recovery, choose wipe and factory reset. Then reboot. setup using wifi or data and skip as much as possible. open developer options and make sure oem unlock is checked and power off the device.
2- Hold vol up and vol down while plugging device into PC. on the bootloader splash screen, hit vol up to enter download mode.
3- Open odin and uncheck auto reboot in the options tab. Click AP, then add Recovery.tar and click start. You should get a green pass in odin when complete. this next step is tricky so pay attention.
4- Remove the cable then Hold vol down and power till the device screen goes blank, as soon as it does immediately release all keys then press and hold vol up till the warning about unlocked bootloader appears. TWRP should boot.
5- Copy DFE to external sdcard. In Twrp click install, select storage, choose micro sd and then choose DFE then slide right to confirm and install. when complete, go back to the main screen in TWRP.
6- Click wipe, click format data, type yes and click the blue check box in lower right corner. back out and click reboot, click system, click do not install.
7-Setup device as you normally would and make sure to enable dev options. now turn off the device and boot into twrp. (vol up and power till bootloader warning.)
8- Copy Magisk to sdcard, In Twrp click install and choose Magisk, slide right to confirm, Magisk will now install.
9- Click reboot system and choose do not install. The device will reboot and you should now have Magisk in your apps, make sure to update it. If its not there, wait a few minutes and it should pop up.
Congrats, you should now have TWRP and Magisk on rooted stock rom android 10.
Click to expand...
Click to collapse
alanz0r said:
Any process step by step about how to install TWRP and MAGISK in Galaxy A70 with android 11 (OneUi 3.1)?
I've tryed with the same files and method that i have done with the Android 10 (OneUi 2.5 version) and i can't start in twrp to flash Magisk
And with the metod of install via Odin without Magisk give's me a bootloop
Anyone knows about this process and can help me please?
Click to expand...
Click to collapse
Dont forget to format data

alanz0r said:
Any process step by step about how to install TWRP and MAGISK in Galaxy A70 with android 11 (OneUi 3.1)?
I've tryed with the same files and method that i have done with the Android 10 (OneUi 2.5 version) and i can't start in twrp to flash Magisk
And with the metod of install via Odin without Magisk give's me a bootloop
Anyone knows about this process and can help me please?
Click to expand...
Click to collapse
Here is your fix. Click link and follow instructions to access twrp on Android 11.
Post in thread 'MarvinMods Galaxy A70 Guide. Root, Los 17.1/18.1, Magisk, Stock O.S. Android 10.' https://forum.xda-developers.com/t/...sk-stock-o-s-android-10.4100655/post-84754781

alanz0r said:
Any process step by step about how to install TWRP and MAGISK in Galaxy A70 with android 11 (OneUi 3.1)?
I've tryed with the same files and method that i have done with the Android 10 (OneUi 2.5 version) and i can't start in twrp to flash Magisk
And with the metod of install via Odin without Magisk give's me a bootloop
Anyone knows about this process and can help me please?
Click to expand...
Click to collapse
I have successfully rooted OneUI 3.1 and flashed it on CTK5 firmware (it was suppose for Android 10)
No more crap recovery boot combination
Real great

JakunTech1010 said:
I have successfully rooted OneUI 3.1 and flashed it on CTK5 firmware (it was suppose for Android 10)
No more crap recovery boot combination
Real great
Click to expand...
Click to collapse
So now you don't need to put the USB cable to start twrp?

[GUIDE][A107M] BL Unlock, Twrp, ROMs and Magisk

I am not responsible for any damage to your device, when you root you lose the Warranty
This guide collects A107F development info, but with the files ported to the A107M.
Thanks to the Galaxy A10s Development team for the original files.
You need to be on Android 10, if you are on android 11, there are tutorials to downgrade.
[BootLoader Unlock]
- Backup all your media, this process will delete your internal media including music and photos
- Go to developer settings and enable [OEM Unlock]
- Reboot to download mode (Turn off, press VOL- & VOL+ and connect the USB)
- When prompted, press and hold VOL + to enter bootloader unlock mode
- Press VOL + to confirm you want to unlock bootloader, this will wipe your data
- If you think the bootloader is fully unlocked, it is actually not! Samsung introduced VaultKeeper, meaning the bootloader will still reject any unofficial partitions before VaultKeeper explicitly allows it.
- Go through the initial setup. Skip through all the steps since data will be wiped again later when we flash TWRP and magisk
- Enable developer options, and confirm that the OEM unlocking option exists and is grayed out. This means the VaultKeeper service has unleashed the bootloader. This step is MANDATORY
- Perfect! Your bootloader now accepts unofficial images in download mode.
[Twrp Install]
At this point, you will need to install Odin on your PC.
Bootloader unlocked is OBLIGATORY.
On your MicroSD, put the "A10s-encryption-disabler.zip" file.
Boot to download mode, load "VBMeta" file in AP and "TWRP Ported to A107M" file in BL
- Disable [Auto Reboot] in Odin
- Flash
- Force a reboot by pressing VOL+, VOL - and POWER buttons at the same time
- With the USB connected, and after the screen goes black, IMMEDIATELY let go of all buttons and IMMEDIATELY press and hold VOL+ and POWER button at the same time to boot to TWRP Recovery
NOTE: TWRP on this phone is not perfect, after booting to it, the screen will remain black after the Samsung logo disappears, simply wait 10 seconds and press the power button 2 times to have acces to it.
- After booting to TWRP successfully, go to WIPE in TWRP
- At the bottom, you should see an option to FORMAT DATA. After you select it, you will be asked to type "yes" in your keyboard. If you do not see this, you probably selected the wrong option.
- After formatting data, flash the "A10s-encryption-disabler.zip" with TWRP. This is done to avoid future bootloops.
- Optional, flash "Magisk.zip" if you want to keep on Stock ROM with root.
- After doing this, boot back to system and you are done
- Wait patiently for the device to boot for the first time
[Custom ROMs Install]
Bootloader unlocked and TWRP isntalled are OBLIGATORY.
Most of the GSI ROMs of this forum works fine on this device.
Only download a64 ROMs, do not confuse with ARM64.
On your MicroSD, put the ROM image.
- Boot to TWRP
- Go to Wipe > Advanced
- Wipe ONLY the System partition
- Go to Install
- At the bottom, select option "Install Image"
- Search for your GSI. It should be something that ends in .img. If it ends in .xz instead, you need to extract the image first
- Optional, if you want Root, flash the "Magisk.zip" file
- Go to recovery main menu
- Go to Reboot
- Reboot to Recovery
- After that, go to Wipe and perform a Factory Reset
- Reboot to System and enjoy!
[Downloads]
>Everything you will need<

I had a problem in Odin an "RQT-CLOSE" error occurred

Lukas203 said:
I had a problem in Odin an "RQT-CLOSE" error occurred
Click to expand...
Click to collapse
I GOT THE SAME THING WHATS HAPPENNING?

Worked perfectly on a107m with binary 6

Alexander_SlowD said:
Worked perfectly on a107m with binary 6
Click to expand...
Click to collapse
If it worked for you, what procedure did you follow? What rom did you use for bit 6? what tools did you use?

It worked for me at first time I see TWRP menu but I didnt followed the instructions correctly , I've tried to do it by myself after that , then I got a unnoficial bootloader error and RQT_CLOSE error when trying to do the Odin process again .
Any working solution are welcome and I will be thankfully , please !

Luciannus said:
It worked for me at first time I see TWRP menu but I didnt followed the instructions correctly , I've tried to do it by myself after that , then I got a unnoficial bootloader error and RQT_CLOSE error when trying to do the Odin process again .
Any working solution are welcome and I will be thankfully , please !
Click to expand...
Click to collapse
The TWRP is slready working for me , now I trying the Magisk part , I did this on Android 11 binary 6 trough A107MUBS6CWA3_ZTO firmware ...