Hi
I have asus me371mg
when turn on device USB logo with load come and tablet brick !!!
i cant access recovery mode and dont work ( V-UP + POWER )
please help !!
how can i flash tablet
thx
no body help me ?
Same problem. any solution to fix this?
Some tool cause i try Power Button + Volume UP (appear USB logo)
Then Volume DOWN 1 times and Volume UP long press (still on USB logo)
Hey all.
I'm new here.
1 week ago I bought an LG g2.
That is basically sprint phone(ls980) but seller did something with software to make it like D802.
I dialed 3845#*802# and a menu opened from there I reset hard and now I have problem with my lg g2.
When I Turn it on it shows LG logo for 5 seconds and restart and then again shows LG logo and restart and so on.
When I put usb cable or charger it shows LG and restart.It is not showing charging or anything.
I try to enter in download mode but when I hold volume up and connect usb cable it shows android logo and a text "erasing" and then shows another text"update system" and restart again.
I also try to enter in recovery mode but it showing Recovery Mode(loading) and after 3-5 seconds it restart again.
My pc/laptop is not detecting my phone.
Only one Mode is which is hardware control mode.
I'm very worried.
Please help me.
:crying::crying::crying::crying::crying::crying:
Please try to go to fastboot mode.
Hello ! I had a problem on my FE375CG. It was rooted, and after an ASUS update, my device stuck with only a USB logo on the screen ! No Boot Droid nothing. There was a lot of error and I was unable to flash my device with Fastboot...
But I prepared a kit with a lot a tools to unbrick the devices ! I don't really know who are the authors of this tools, but here is the pack !
First Download the package : "Unbrick_Fonepad_7.zip" : https://mega.nz/#F!qM0EECyA
Second, unzip the package. Install the ADB drivers and the Intel DnX USB Drivers.
Then, Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Connect the tablet to your computer : It should be recognize, screen remaining off.
Then you have to run the "Predowngrade.cmd" in the "3 - PreDebrick" directory.
At the end, you will see an Intel Logo (hourra). Disconnect you device, power off.
Then you have to run the "Downgrade.cmd" in the "3 - Full Debrick" directory.
The processus will stop, and the intel logo appears again.
Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Disconnect you device, power off.
Then, Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Reconnect your device
And hit enter on your computer.
And... Tadaaaaaaaaaaaaaaaaa ! It should work again ^^ ! You have just to flash the last firmware with Bootdroid ! Last firmware can be found here : https://www.asus.com/support/Download/28/7/0/10/Ss6JyhD8bOcmeH6f/32/
Sorry for my english, I'm french ^^ ! Hope it will help some peoples.
Will this work for k004?
Hello,
my FE375CG is bricked: when I turned it on, it's stuck on INTEL logo.
I tried your method, but, after third passage, I can't turned it off. So I waited battery discharge, but when I plug to recharge, the tablet turned on and stuck on INTEL screen, I' can't proceed to the fourth step (I' can't maintain + and - and power on your device for 4 seconds, it turns itself on, remains on INTEL bootscreen and I can't do anything)
Have you some suggestions?
This tutorial work for K01N/FE171CG??
Alviyansyah said:
This tutorial work for K01N/FE171CG??
Click to expand...
Click to collapse
I'd like to know as well.
Sent from my ASUS_Z00LD using Tapatalk 2
Successfully unbrick my ASUS FONEPAD 7 (FE375CG)
after trying more than 10 times i am succeeded. 2nd step of fulldebrick is quite difficult but it works.... volume + and - and power button pressing just 4 second and at 3rd second the screen will flash lightly which can be observed in dark environment.
help me please......... i have an FONEPAD 7 , but its ME175CG... probably i've bricked the device... i cant load recovery mode, the device is blocked in logo android green, and my pc doesn't read nothing!!! PLEAZ HELP ME!!!!
Fonepad k004 me371mg
Hello. I need a help tô my fonepad k004 me371mg. Its bricked. No droidboot. .. no system... nothing. .. only asus logo or usb cable logo. .. the imagem o found only raw formar. ... Tks
Is work in K00E? i need help
suzukube said:
Hello ! I had a problem on my FE375CG. It was rooted, and after an ASUS update, my device stuck with only a USB logo on the screen ! No Boot Droid nothing. There was a lot of error and I was unable to flash my device with Fastboot...
But I prepared a kit with a lot a tools to unbrick the devices ! I don't really know who are the authors of this tools, but here is the pack !
First Download the package : "Unbrick_Fonepad_7.zip" : https://mega.nz/#F!qM0EECyA
Second, unzip the package. Install the ADB drivers and the Intel DnX USB Drivers.
Then, Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Connect the tablet to your computer : It should be recognize, screen remaining off.
Then you have to run the "Predowngrade.cmd" in the "3 - PreDebrick" directory.
At the end, you will see an Intel Logo (hourra). Disconnect you device, power off.
Then you have to run the "Downgrade.cmd" in the "3 - Full Debrick" directory.
The processus will stop, and the intel logo appears again.
Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Disconnect you device, power off.
Then, Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Reconnect your device
And hit enter on your computer.
And... Tadaaaaaaaaaaaaaaaaa ! It should work again ^^ ! You have just to flash the last firmware with Bootdroid ! Last firmware can be found here : https://www.asus.com/support/Download/28/7/0/10/Ss6JyhD8bOcmeH6f/32/
Sorry for my english, I'm french ^^ ! Hope it will help some peoples.
Click to expand...
Click to collapse
Your tutorial is not working for ASUS K004 and file xfstk-dldr-solo can not be run..
My device is not recognized by the pc. It shows the usb logo everytime. I opened the back cover and disconnected the battery. As soon as i connect the battery it turns on by itself, vibrates twice and shows the usb logo. it only turns off if i disconnect the battery. Without the battery it has the same behaviour if i connect the usb cable. None of the keys works except the VOL- or VOL+ and VOL - or PWR and VOL-. If i press vol- or any combination that has VOL- and connect the battery or the cable the device wont turn on and is not detected by the pc. If i do it with vol + or power or a combination of both it starts like i said earlier with two vibrations and the usb logo but not being detected. I'm lost because it being detected by the pc is a requirement. I installed drivers from folder 1 - ASUS_Android_USB_drivers_for_Windows and folder 2 - IntelDnXUSBDriverSetup.
The device is a FE375CG (K019) Asus Fonepad 7
Tried with windows 10 x64 on 2 different computers.
PS: I have disabled driver signature enforcement.
Hi
How can I obtain .img files for K00E (me372cg) ?
if Predownload Cmd worked just proceed to full debrick Download-3cmd then install updated firmware BESURE TO RENAME OFFICIAL FIRMWARE TO MOFD_SDUPDATE.zip it will auto install in recovery mode.
i had assus zenfone 2 Asus_Z00AD . and after trying to upgrade firmware to marshmallow . it stucks now on the first white splash screen (( ASUS In search of incredible ))& Pwered by android >> and stay stucking foe about 1 minute then restart on the same screen . and the big problem that it dosent respond to the combination with Power Button + Vol Up >> or any othere buttons and still loop and loop ... so i cant enter to fastboot or recovery or any thing >>>>
so please me > is there any solution or it became dead for ever ?? please hellllllp
after connect to pc
thats what i get in device manager after i try to connect via usb
67 viwes without any reply ?? what that mean ?????
hye can anyone help me with my asus z00d stuct at asus logo and cannot enter the recovery mode.
when pressing power and volume + still stuck at asus logo, same with when i press power and volume -.
when i connect to usb and press power button it only display battery.
thanks a lot, and sorry for my bad english.