Hi
I have asus me371mg
when turn on device USB logo with load come and tablet brick !!!
i cant access recovery mode and dont work ( V-UP + POWER )
please help !!
how can i flash tablet
thx
no body help me ?
Same problem. any solution to fix this?
Some tool cause i try Power Button + Volume UP (appear USB logo)
Then Volume DOWN 1 times and Volume UP long press (still on USB logo)
Related
hi,
any help is hugely appreciated.
I wiped my phone in recovery with the option to wipe for new custom rom, this worked fine. when i went to install custom rom it failed and then turned itself off. now the phone just gets stuck at the Sony logo. the only way i can turn it off is via the red button in the sim slot.
I am unable to connect to the computer at all, no fastboot. I'm also unable to boot into recovery to restore.
Please help. Hope i haven't ****ed it up beyond fixing
Thanks
Flash a stock ftf with flashtool (in flashmode). You should definitely get into flashmode and fastboot, otherwise there is a problem with your computer.
Funny, I didn't even know there was a red button Holding Volume Up + Power for a few seconds always worked for me, no matter in which state the phone was.
Hi all,
I've exactely the same problem !!!
My phone stuck to Sony logo, and not reconyze on my 3 PC.... before that, usb connexion work fine on all PC, but now.... nothing
I've just POWER + and VOL+ (its power off the phone), i've no led color light
I've try flashboot, but not detect my phone
i've try to install :
flashtool-0.9.16.1-windows (not detected)
Flashtool-drivers-1.5-20140318 (my computer doesnt not see my phone)
Xperia_Z1_Compact_driver (my computer doesnt not see my phone too)
I can't go into Flashmode...
When i power off my Z1c, and i plug usb + (vol+) nothing appear...stuck Sony logo...
I'm lost... I need your help XDA members ! just U can help me
PS : the red button is in the SIM slot, but i think is same POWER + (VOL+).... its power off the phone
Because you're doing it wrong. Vol+ enters fastboot mode, you have to press Vol- to enter flashmode. Then use Flashtool to restore the firmware.
Iruwen said:
Because you're doing it wrong. Vol+ enters fastboot mode, you have to press Vol- to enter flashmode. Then use Flashtool to restore the firmware.
Click to expand...
Click to collapse
THX for your response !
Sorry it's a mistake....
I've try both (vol+ and USB) and (vol- and USB).... but no sound (device not detected), in device manager nothing appear too.
I've make a fresh install of windows 7 x64 on another PC.
I finaly working to boot (2-3 times) with Vol- + USB cable, but stay in sony logo and Flashtool whait for device...
Please i need u're help beacause i'm really lost (usualy i flash many phone S4, Mediatek, phones, etc...) but now i dont find solution
My problem come from the original cable
All this because of the USB cable does not work ... CRAZY !
This USB cable is new and original sony... just 2 Weeks
I solved my problem with new one
That's unfortunate, good you found the issue.
Hello ! I had a problem on my FE375CG. It was rooted, and after an ASUS update, my device stuck with only a USB logo on the screen ! No Boot Droid nothing. There was a lot of error and I was unable to flash my device with Fastboot...
But I prepared a kit with a lot a tools to unbrick the devices ! I don't really know who are the authors of this tools, but here is the pack !
First Download the package : "Unbrick_Fonepad_7.zip" : https://mega.nz/#F!qM0EECyA
Second, unzip the package. Install the ADB drivers and the Intel DnX USB Drivers.
Then, Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Connect the tablet to your computer : It should be recognize, screen remaining off.
Then you have to run the "Predowngrade.cmd" in the "3 - PreDebrick" directory.
At the end, you will see an Intel Logo (hourra). Disconnect you device, power off.
Then you have to run the "Downgrade.cmd" in the "3 - Full Debrick" directory.
The processus will stop, and the intel logo appears again.
Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Disconnect you device, power off.
Then, Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Reconnect your device
And hit enter on your computer.
And... Tadaaaaaaaaaaaaaaaaa ! It should work again ^^ ! You have just to flash the last firmware with Bootdroid ! Last firmware can be found here : https://www.asus.com/support/Download/28/7/0/10/Ss6JyhD8bOcmeH6f/32/
Sorry for my english, I'm french ^^ ! Hope it will help some peoples.
Will this work for k004?
Hello,
my FE375CG is bricked: when I turned it on, it's stuck on INTEL logo.
I tried your method, but, after third passage, I can't turned it off. So I waited battery discharge, but when I plug to recharge, the tablet turned on and stuck on INTEL screen, I' can't proceed to the fourth step (I' can't maintain + and - and power on your device for 4 seconds, it turns itself on, remains on INTEL bootscreen and I can't do anything)
Have you some suggestions?
This tutorial work for K01N/FE171CG??
Alviyansyah said:
This tutorial work for K01N/FE171CG??
Click to expand...
Click to collapse
I'd like to know as well.
Sent from my ASUS_Z00LD using Tapatalk 2
Successfully unbrick my ASUS FONEPAD 7 (FE375CG)
after trying more than 10 times i am succeeded. 2nd step of fulldebrick is quite difficult but it works.... volume + and - and power button pressing just 4 second and at 3rd second the screen will flash lightly which can be observed in dark environment.
help me please......... i have an FONEPAD 7 , but its ME175CG... probably i've bricked the device... i cant load recovery mode, the device is blocked in logo android green, and my pc doesn't read nothing!!! PLEAZ HELP ME!!!!
Fonepad k004 me371mg
Hello. I need a help tô my fonepad k004 me371mg. Its bricked. No droidboot. .. no system... nothing. .. only asus logo or usb cable logo. .. the imagem o found only raw formar. ... Tks
Is work in K00E? i need help
suzukube said:
Hello ! I had a problem on my FE375CG. It was rooted, and after an ASUS update, my device stuck with only a USB logo on the screen ! No Boot Droid nothing. There was a lot of error and I was unable to flash my device with Fastboot...
But I prepared a kit with a lot a tools to unbrick the devices ! I don't really know who are the authors of this tools, but here is the pack !
First Download the package : "Unbrick_Fonepad_7.zip" : https://mega.nz/#F!qM0EECyA
Second, unzip the package. Install the ADB drivers and the Intel DnX USB Drivers.
Then, Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Connect the tablet to your computer : It should be recognize, screen remaining off.
Then you have to run the "Predowngrade.cmd" in the "3 - PreDebrick" directory.
At the end, you will see an Intel Logo (hourra). Disconnect you device, power off.
Then you have to run the "Downgrade.cmd" in the "3 - Full Debrick" directory.
The processus will stop, and the intel logo appears again.
Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Disconnect you device, power off.
Then, Maintain + and - and power on your device for 4 secondes. The screen should remain off.
Reconnect your device
And hit enter on your computer.
And... Tadaaaaaaaaaaaaaaaaa ! It should work again ^^ ! You have just to flash the last firmware with Bootdroid ! Last firmware can be found here : https://www.asus.com/support/Download/28/7/0/10/Ss6JyhD8bOcmeH6f/32/
Sorry for my english, I'm french ^^ ! Hope it will help some peoples.
Click to expand...
Click to collapse
Your tutorial is not working for ASUS K004 and file xfstk-dldr-solo can not be run..
My device is not recognized by the pc. It shows the usb logo everytime. I opened the back cover and disconnected the battery. As soon as i connect the battery it turns on by itself, vibrates twice and shows the usb logo. it only turns off if i disconnect the battery. Without the battery it has the same behaviour if i connect the usb cable. None of the keys works except the VOL- or VOL+ and VOL - or PWR and VOL-. If i press vol- or any combination that has VOL- and connect the battery or the cable the device wont turn on and is not detected by the pc. If i do it with vol + or power or a combination of both it starts like i said earlier with two vibrations and the usb logo but not being detected. I'm lost because it being detected by the pc is a requirement. I installed drivers from folder 1 - ASUS_Android_USB_drivers_for_Windows and folder 2 - IntelDnXUSBDriverSetup.
The device is a FE375CG (K019) Asus Fonepad 7
Tried with windows 10 x64 on 2 different computers.
PS: I have disabled driver signature enforcement.
Hi
How can I obtain .img files for K00E (me372cg) ?
if Predownload Cmd worked just proceed to full debrick Download-3cmd then install updated firmware BESURE TO RENAME OFFICIAL FIRMWARE TO MOFD_SDUPDATE.zip it will auto install in recovery mode.
hi everyone
i have an asus fe 170CG and stuck in asus logo
when hold up key and power key to go in fast boot mod or droidboot just show USB logo and say USB cable not connected ( not show any menu example wipe , reboot ....... and not happen when connect USB )and ofter second restart and back in asus logo
please help to solved it
tnx
hye can anyone help me with my asus z00d stuct at asus logo and cannot enter the recovery mode.
when pressing power and volume + still stuck at asus logo, same with when i press power and volume -.
when i connect to usb and press power button it only display battery.
thanks a lot, and sorry for my bad english.
Hello together,
i have a problem with my Note 10 plus.
I have android 11 installed with root (dr ketan rom). Today i wanted to flash official Android 13. So i download the original firmware. In odin it stucks and cant finished. The message --》An error has occurred while update the device software. So i unplug the cable. After that i have only a blackscreen. I dont see anything on the display I try to start with :
volume down + power
volume up + power
usb cable + volume down + power
usb cable + volume up + power
usb cable + volume up + volume down
nothing help. When i will charge the phone nothing happens. No boot animation or something else.
Can anyone help ?
anastasiszn said:
Hello together,
i have a problem with my Note 10 plus.
I have android 11 installed with root (dr ketan rom). Today i wanted to flash official Android 13. So i download the original firmware. In odin it stucks and cant finished. The message --》An error has occurred while update the device software. So i unplug the cable. After that i have only a blackscreen. I dont see anything on the display I try to start with :
volume down + power
volume up + power
usb cable + volume down + power
usb cable + volume up + power
usb cable + volume up + volume down
nothing help. When i will charge the phone nothing happens. No boot animation or something else.
Can anyone help ?
Click to expand...
Click to collapse
Your device is most likely bricked; fixing it requires software and tools that Samsung and other manufacturers have not made available.
Sorry to be the bearer of bad news. Did you check any of the options in Odin before you started?
Witch options do you mean ?
Auto reboot and f reset time ?
anastasiszn said:
Witch options do you mean ?
Auto reboot and f reset time ?
Click to expand...
Click to collapse
Yes, did you have any other options checked?
no i check nothing else.
Can i do anything else ?
A Programm or something ?