Related
I wanted to install LineageOS.
I followed the tutorial here: https://wiki.lineageos.org/devices/bullhead/install
I completed the folowing steps
Code:
6.) Select Cache, System and Data partitions to be wiped and then Swipe to Wipe.
7.) Go back to return to main menu, then select Install.
8.) Navigate to /sdcard, and select the LineageOS .zip package.
But couln't complete the 8th step becaus I think I don't have the LinageOS zip on my phone, How can I move it there?
How can I send LineageOS install package to my phone so I can install it with TWRP ?
I am using Nexus 5x with Windows 10.
Not to worry
Easy. Just boot up your current ROM and USB, SD Card, Bluetooth, WHATEVER means you have available to move the file to your downloads folder or someplace like that. As long as you can navigate to it, TWRP will let you do that when the time comes. Recommend you put your GApps zip file (I prefer nano) and the appropriate L.O.S. su-addon zip in there as well. After all, what's the use of the ROM if it isn't rooted
Now, fire it up in TWRP and do at least one complete, everything you can include backup of the whole thing before you do ANYTHING else. TWO backups are better if you can move one of them completely off device, as in to a USB stick, etc... The more good backups you have, the less the evil Gods of screwing up installs will try to seek you out. Yes, that has been scientifically proven, even if it sounds like superstitious mumbo-jumbo.
Still good? Wipe dalvik, cache, whatver your build recommends, and flash L.O.S., the su-addon, and GApps all at once. Reboot, be just a little bit patient the first time around, and enjoy. Good Luck.
nezlek said:
Easy. Just boot up your current ROM and USB, SD Card, Bluetooth, WHATEVER means you have available to move the file to your downloads folder or someplace like that. As long as you can navigate to it, TWRP will let you do that when the time comes. Recommend you put your GApps zip file (I prefer nano) and the appropriate L.O.S. su-addon zip in there as well. After all, what's the use of the ROM if it isn't rooted
Now, fire it up in TWRP and do at least one complete, everything you can include backup of the whole thing before you do ANYTHING else. TWO backups are better if you can move one of them completely off device, as in to a USB stick, etc... The more good backups you have, the less the evil Gods of screwing up installs will try to seek you out. Yes, that has been scientifically proven, even if it sounds like superstitious mumbo-jumbo.
Still good? Wipe dalvik, cache, whatver your build recommends, and flash L.O.S., the su-addon, and GApps all at once. Reboot, be just a little bit patient the first time around, and enjoy. Good Luck.
Click to expand...
Click to collapse
Sorry I don't know what you mean exactly. Can you exlain a bit more?
My situation looks like this:
1) I don't need to backup anythig.
2) My problem is that I don't have the lineageOS zip on my phone so I can't install it with TWRP
3) because of step 5,6 on the tutorial I believe I don't have any current ROMS!
step 5,6:
Code:
5) Select Wipe and then Advanced Wipe.
6) Select Cache, System and Data partitions to be wiped and then Swipe to Wipe.
My assumption is that no ROM will load as the current ROM got deleted during step 5&6.
All I get when I start the phone is GOOGLE sign and the lock sign at the bottom.
4) When I go to Reboot inside TWRP and click System I get "No OS Installed! Are you sure you wish to reboot?"
Can you help?
flex567 said:
Sorry I don't know what you mean exactly. Can you exlain a bit more?
My situation looks like this:
1) I don't need to backup anythig.
2) My problem is that I don't have the lineageOS zip on my phone so I can't install it with TWRP
3) because of step 5,6 on the tutorial I believe I don't have any current ROMS!
step 5,6:
Code:
5) Select Wipe and then Advanced Wipe.
6) Select Cache, System and Data partitions to be wiped and then Swipe to Wipe.
My assumption is that no ROM will load as the current ROM got deleted during step 5&6.
All I get when I start the phone is GOOGLE sign and the lock sign at the bottom.
4) When I go to Reboot inside TWRP and click System I get "No OS Installed! Are you sure you wish to reboot?"
Can you help?
Click to expand...
Click to collapse
H'mmm.......... It does appear that you wiped the whole thing, and THAT may make it a bit more of a challenge, but let us try our best. HOPEFULLY your device will recognize the necessary files on a USB stick. You can tell TWRP to MOUNT the USB drive in order to do that if you must, and many devices have no problem and will recognize the device with no added effort, and you just have to navigate to it within TWRP. THAT will be the EASY way, and given what you've described, there isn't anything left on the device to be concerned about with respect to backups, etc... so cross your fingers, and if TWRP can mount and find a USB storage device you just have to flash the three zip files from USB storage as previously described. Otherwise, there is not much I could do personally without the device in hand, although the easiest path forward might be to re-flash a stock ROM and start over again. And please note you would not be the first person reading (or writing) this message to need to do that. Once you get the hang of this, it is not a brutal process, but the first time or two it can be a bit intimidating. Hang in there, the good news is that it is somewhat difficult to totally brick most of these things, so persistence should win out. As long as you can still boot it into TWRP you're fine. Now, one other very important thing. If somehow the bootloader was not unlocked, none of this is going to work at all. SO if that is the case, your only recourse is going to be to get that taken care of first, which requires one of: some finesse with ADB / fastboot, a ROM of some sort (i.e. re-install stock) installed on the device that lets you unlock it by flipping the switch in developer settings , or some other more geeky process that is best supervised by a person who genuinely knows what they are doing and with physical access to the device. There will be no shortage of content out here concerning how-to, but some of the folks writing it are not necessarily technical writers targeting a less experienced audience, even if they are in many cases quite brilliant programmers.
nezlek said:
H'mmm.......... It does appear that you wiped the whole thing, and THAT may make it a bit more of a challenge, but let us try our best. HOPEFULLY your device will recognize the necessary files on a USB stick. You can tell TWRP to MOUNT the USB drive in order to do that if you must, and many devices have no problem and will recognize the device with no added effort, and you just have to navigate to it within TWRP. THAT will be the EASY way, and given what you've described, there isn't anything left on the device to be concerned about with respect to backups, etc... so cross your fingers, and if TWRP can mount and find a USB storage device you just have to flash the three zip files from USB storage as previously described. Otherwise, there is not much I could do personally without the device in hand, although the easiest path forward might be to re-flash a stock ROM and start over again. And please note you would not be the first person reading (or writing) this message to need to do that. Once you get the hang of this, it is not a brutal process, but the first time or two it can be a bit intimidating. Hang in there, the good news is that it is somewhat difficult to totally brick most of these things, so persistence should win out. As long as you can still boot it into TWRP you're fine. Now, one other very important thing. If somehow the bootloader was not unlocked, none of this is going to work at all. SO if that is the case, your only recourse is going to be to get that taken care of first, which requires one of: some finesse with ADB / fastboot, a ROM of some sort (i.e. re-install stock) installed on the device that lets you unlock it by flipping the switch in developer settings , or some other more geeky process that is best supervised by a person who genuinely knows what they are doing and with physical access to the device. There will be no shortage of content out here concerning how-to, but some of the folks writing it are not necessarily technical writers targeting a less experienced audience, even if they are in many cases quite brilliant programmers.
Click to expand...
Click to collapse
The bootloader is unlocked becaues I unlocked it and I see the red sign:
Code:
DEVICE STATE - unlocked
When I click Mount I get the following options, System, Vendor Data, Cache, USB OTG, which one should I select ?
I was able to fix it and I installed it now the Lineage OS works
I had to go to
Code:
Mount > enable MTP
and after that I was able to use
Code:
ADB SHELL
and after that I was able to push the zip to the device. Once it was on the phone I was able to use TWARP to install it.
Code:
$ adb push lineage-15.1-20180430-nightly-bullhead-signed.zip sdcard
The only question I have is why I get this message every time I turn on the phone, how can I remove it? :
Code:
A vendor image mismatch has been detected. Typically this means your vendor images us out of date. Please enousre your vendor image matches OPM2. 171019.029
Since I decided not to install Play Store, how can I now install some programs without the playstore ?
flex567 said:
I was able to fix it and I installed it now the Lineage OS works
I had to go to
Code:
Mount > enable MTP
and after that I was able to use
Code:
ADB SHELL
and after that I was able to push the zip to the device. Once it was on the phone I was able to use TWARP to install it.
Code:
$ adb push lineage-15.1-20180430-nightly-bullhead-signed.zip sdcard
The only question I have is why I get this message every time I turn on the phone, how can I remove it? :
Code:
A vendor image mismatch has been detected. Typically this means your vendor images us out of date. Please enousre your vendor image matches OPM2. 171019.029
Click to expand...
Click to collapse
Wow, you took what I would have thought of as the long way, but so far, so good it would seem. I was thinking you could have simply mounted the USB as an OTG device and flashed directly from that via TWRP. I have ZERO clue about the "vendor image mismatch" message. But now that you have it more or less working, you COULD try putting the zip files into the regular downloads folder, do a dalvik and cache (factory reset) wipe, and re-flash them. You haven't loaded up a bunch of stuff to worry about replacing. Worst case you repeat initial setup. What have you got to lose?
---------- Post added at 08:36 PM ---------- Previous post was at 08:27 PM ----------
flex567 said:
I was able to fix it and I installed it now the Lineage OS works
I had to go to
Code:
Mount > enable MTP
and after that I was able to use
Code:
ADB SHELL
and after that I was able to push the zip to the device. Once it was on the phone I was able to use TWARP to install it.
Code:
$ adb push lineage-15.1-20180430-nightly-bullhead-signed.zip sdcard
The only question I have is why I get this message every time I turn on the phone, how can I remove it? :
Code:
A vendor image mismatch has been detected. Typically this means your vendor images us out of date. Please enousre your vendor image matches OPM2. 171019.029
Since I decided not to install Play Store, how can I now install some programs without the playstore ?
Click to expand...
Click to collapse
Missed that one, sorry. If you did not flash the GApps zip when you installed Lineage, you can hunt down the .APK files for apps you want on the web. That'd be the only way I can think of and a good reason to re-do it before it is too long into the process !!! If you pick the nano or even pico options you won't be dragging much if any Google bloat onto the phone. Personally, while I often find the Play Store to be a pain in the .... I can ignore it until I need something. On some devices it can certainly be most intrusive.
I don't think I will play around with it now for some time.
I was thinking you could have simply mounted the USB as an OTG device and flashed directly from that via TWRP
Click to expand...
Click to collapse
I tried to select the OTG thing but was unable to put the checkmark in.
I also found the fix for Vendor Image mismatch, didn't try if it works though:
https://gist.github.com/MacKentoch/48ad6b91613213ee9774c138267e2ed4#file-fix-lineageos-vendor-mismatch-error-nexus5x-md
I also think this needs to be updated:
https://wiki.lineageos.org/adb_fastboot_guide.html
https://wiki.lineageos.org/devices/bullhead/install
you COULD try putting the zip files into the regular downloads folder
Click to expand...
Click to collapse
I had problems pushing the LineageOS.zip file anywhere else, I coulnt create new folder.
flex567 said:
I was able to fix it and I installed it now the Lineage OS works
I had to go to
and after that I was able to use
and after that I was able to push the zip to the device. Once it was on the phone I was able to use TWARP to install it.
The only question I have is why I get this message every time I turn on the phone, how can I remove it? :
Since I decided not to install Play Store, how can I now install some programs without the playstore ?
Click to expand...
Click to collapse
Congratulations for not installing play store. I think you not installed play services as well. You simply did not install any GApps. That's the first step to get your setup slim and privacy friendly. Next steps are installing f-droid app. From f-droid you can install free software. If you really need apps from play store you can get them with yalp. If they don't run without Google play services you can try microG.
I found a page from which I can download apk files from play store so I will just use that for now.
Today, my phone got bricked after I installed Magisk, am i am looking for a way of sorting it out. The phone was running Android 9 DP3 when rooted, and I was following HighOnAndroids root guide on Youtube for reference,
I unlocked my bootloader and successfully installed TWRP. After this, I installed Magisk, which went throuygh perfectly fine. However, after rebooting the phone, I am stuck on the google splash screen, with a small progress bar that stays for the duration of the time on this screen. After about 2 minutes, the phone reboots into TWRP again.
Does anyone know how I could return to stock Android or at least escape this issue?
Many thanks
James
Jameswebb97 said:
Today, my phone got bricked after I installed Magisk, am i am looking for a way of sorting it out. The phone was running Android 9 DP3 when rooted, and I was following HighOnAndroids root guide on Youtube for reference,
I unlocked my bootloader and successfully installed TWRP. After this, I installed Magisk, which went throuygh perfectly fine. However, after rebooting the phone, I am stuck on the google splash screen, with a small progress bar that stays for the duration of the time on this screen. After about 2 minutes, the phone reboots into TWRP again.
Does anyone know how I could return to stock Android or at least escape this issue?
Many thanks
James
Click to expand...
Click to collapse
Use duces script to flash June google factory image.
jlokos said:
Use duces script to flash June google factory image.
Click to expand...
Click to collapse
I followed the guide on the DeucesScript XDA page but the command window keeps saying "'fastboot' is not recognized as an internal or external command, operable program or batch file."
Jameswebb97 said:
I followed the guide on the DeucesScript XDA page but the command window keeps saying "'fastboot' is not recognized as an internal or external command, operable program or batch file."
Click to expand...
Click to collapse
You need this information (the stuff I made bold + the hyperlink):
Code:
If you are having issues with this script:
Download the latest fastboot and adb Platform Tools UPDATED Dec. 22, 2017!!! This is the most common problem!!!
Download/Update Google USB Drivers
Video: Force-Installing the Android USB Drivers Fastboot & ADB
[B]Verify you have the [URL="https://wiki.lineageos.org/adb_fastboot_guide.html"]environment variable (path)[/URL] set for adb and fastboot[/B]
Try a different USB port
Try a different cable
Format Userdata in Stock Recovery
Try to boot stock before doing mods like Locking Bootloader / Kernel / TWRP / Magisk
Jameswebb97 said:
I followed the guide on the DeucesScript XDA page but the command window keeps saying "'fastboot' is not recognized as an internal or external command, operable program or batch file."
Click to expand...
Click to collapse
umph....hate to tell you, but you have a long way to go...
so before going on this "journey", I would suggest you booting into TWRP again, and try installing (not adb sideloading, just in case you're doing that) Magisk again. Also, be sure you are using the latest (might be considered "beta") 16.4 for taimen... I'm thinking your boot.img or dtbo.img simply may have gotten glitchy and repatching (by installing Magisk again) might fix it...
Also, if you want to go a step further, you might want to consider using the official Magisk uninstaller. Since Magisk makes a copy of your stock boot and dtbo image, it may put that back so you can get it in working order to get into the system (although without root), and then figure things out and/or reinstall Magisk (through TWRP is best) while all things Magisk was removed...
Good luck and hope this helps....
Make sure you are trying to open from the correct location, and put .\fastboot
EvilDobe said:
You need this information (the stuff I made bold + the hyperlink):
Code:
If you are having issues with this script:
Download the latest fastboot and adb Platform Tools UPDATED Dec. 22, 2017!!! This is the most common problem!!!
Download/Update Google USB Drivers
Video: Force-Installing the Android USB Drivers Fastboot & ADB
[B]Verify you have the [URL="https://wiki.lineageos.org/adb_fastboot_guide.html"]environment variable (path)[/URL] set for adb and fastboot[/B]
Try a different USB port
Try a different cable
Format Userdata in Stock Recovery
Try to boot stock before doing mods like Locking Bootloader / Kernel / TWRP / Magisk
Click to expand...
Click to collapse
Ive tried all of this now, i got the script working, but now the phne says it is corrupt and i cannot get into recovery. Is this game over do you think?
simplepinoi177 said:
umph....hate to tell you, but you have a long way to go...
so before going on this "journey", I would suggest you booting into TWRP again, and try installing (not adb sideloading, just in case you're doing that) Magisk again. Also, be sure you are using the latest (might be considered "beta") 16.4 for taimen... I'm thinking your boot.img or dtbo.img simply may have gotten glitchy and repatching (by installing Magisk again) might fix it...
Also, if you want to go a step further, you might want to consider using the official Magisk uninstaller. Since Magisk makes a copy of your stock boot and dtbo image, it may put that back so you can get it in working order to get into the system (although without root), and then figure things out and/or reinstall Magisk (through TWRP is best) while all things Magisk was removed...
Good luck and hope this helps....
Click to expand...
Click to collapse
This is good advice, thanks. i have a new problem (ugh), where i got the script working through changing the paths, but now the phone says that it is corrupt and i cannot access TWRP. Game over?
Jameswebb97 said:
Ive tried all of this now, i got the script working, but now the phne says it is corrupt and i cannot get into recovery. Is this game over do you think?
Click to expand...
Click to collapse
With the unlocked bootloader it'll always say the device is corrupt. Manually put the device into the bootloader & flash the DeucesScript. You're basically starting over at this point but it is possible to get up & going again.
Jameswebb97 said:
This is good advice, thanks. i have a new problem (ugh), where i got the script working through changing the paths, but now the phone says that it is corrupt and i cannot access TWRP. Game over?
Click to expand...
Click to collapse
EvilDobe said:
With the unlocked bootloader it'll always say the device is corrupt. Manually put the device into the bootloader & flash the DeucesScript. You're basically starting over at this point but it is possible to get up & going again.
Click to expand...
Click to collapse
EvilDobe might be right...but I have a bit to offer before maybe starting all over...
I doubt you needed to edit the script and "change the paths." Most likely you merely did not have the images (you extracted from the .zip of the Full Factory image you got from the Google Developers site) inside the "platform-tools" folder with the adb & fastboot .exe and all the other files and folders.
In any case, I suggest you get the TWRP image file [.img] (NOT the installer .zip necessarily), put the .img file "... inside the "platform-tools" folder with the adb & fastboot .exe and all the other files and folders." (I've seen some users simply cut and paste those 2 .exe files only to the extracted folder -- this is why I state it this way) Then, power down your device. After it's off, hold down the Volume Down button and press & hold the Power button (this is the manual way to get into the Bootloader Mode). Once there, plug your phone into your computer (USB-A to USB-C would be best) and open a command prompt/powershell ("run as administrator" or with administrative priveleges) and direct it to the platform-tools folder (i.e. if I put it on my desktop, it would be "C:\Users\MyName\Desktop\platform-tools"), you can temporarily boot into TWRP via command
Code:
fastboot boot twrp-3.2.1-2-taimen.img
When in TWRP (hopefully), I suggest trying to do what I advised before -- try either Magisk installer to repatch the boot and dtbo image, or Magisk Uninstaller to attempt to replace your boot and dtbo to stock.
*NOTE: Of course, this is assuming you are running Microsoft Windows (if not, you will need to input .\ as @naiku suggested) and also the whole "device is corrupt" is due to "funky" boot image issues. If not, I/we can guide you to flashing the Full Factory back onto the phone (hopefully without losing data and settings)...
Good luck and hope this helps...
simplepinoi177 said:
EvilDobe might be right...but I have a bit to offer before maybe starting all over...
I doubt you needed to edit the script and "change the paths." Most likely you merely did not have the images (you extracted from the .zip of the Full Factory image you got from the Google Developers site) inside the "platform-tools" folder with the adb & fastboot .exe and all the other files and folders.
In any case, I suggest you get the TWRP image file [.img] (NOT the installer .zip necessarily), put the .img file "... inside the "platform-tools" folder with the adb & fastboot .exe and all the other files and folders." (I've seen some users simply cut and paste those 2 .exe files only to the extracted folder -- this is why I state it this way) Then, power down your device. After it's off, hold down the Volume Down button and press & hold the Power button (this is the manual way to get into the Bootloader Mode). Once there, plug your phone into your computer (USB-A to USB-C would be best) and open a command prompt/powershell ("run as administrator" or with administrative priveleges) and direct it to the platform-tools folder (i.e. if I put it on my desktop, it would be "C:\Users\MyName\Desktop\platform-tools"), you can temporarily boot into TWRP via command
Code:
fastboot boot twrp-3.2.1-2-taimen.img
When in TWRP (hopefully), I suggest trying to do what I advised before -- try either Magisk installer to repatch the boot and dtbo image, or Magisk Uninstaller to attempt to replace your boot and dtbo to stock.
*NOTE: Of course, this is assuming you are running Microsoft Windows (if not, you will need to input .\ as @naiku suggested) and also the whole "device is corrupt" is due to "funky" boot image issues. If not, I/we can guide you to flashing the Full Factory back onto the phone (hopefully without losing data and settings)...
Good luck and hope this helps...
Click to expand...
Click to collapse
Pleased to be editing this comment; managed to get it working following your step by step. Think i'm going to stay away from rooting something this expensive in the future! Thanks so much!
Jameswebb97 said:
Pleased to be editing this comment; managed to get it working following your step by step. Think i'm going to stay away from rooting something this expensive in the future! Thanks so much!
Click to expand...
Click to collapse
I wouldn't go that far with staying away. When I come across people IRL that want to start doing this stuff I always tell them to read the instructions, step through them, read the instructions again, ask questions (as you did here) BEFORE you get started, read the instructions again, and only when you're confident start messing with your device. This is a fun, and at times stressful, hobby. It's great when everything goes according to plan but it's an omg omg omg omg omg omg moment when you mess something up.
Start with baby steps. The straight upgrade to P is fairly simple provided your device is unlocked. Get that working & you'll be set. I have root on my DP3 & the only thing I've done so far is delete some apps from system that I know I don't want/need. If your main goal is to just enjoy your phone, test out Android P, and maybe go back... root isn't needed. Once everything is squared away & you're running for a day or so you can always fastboot to recovery, make a backup, and then try to add root. I hope you don't shy away & get deeper into the hobby. It truly starts to get fun when you begin to understand more of what is going on.
Jameswebb97 said:
Pleased to be editing this comment; managed to get it working following your step by step. Think i'm going to stay away from rooting something this expensive in the future! Thanks so much!
Click to expand...
Click to collapse
Hey I'm so glad you got it working! Leave me a "Thanks!" would make it up to me ... I'm always happy to help out and get things figured out...yet I don't get the satisfaction of knowing if it does end up helping a lot of the time because a good number don't come back with their experience...so thanks for that! Glad you got it going...
EvilDobe said:
I wouldn't go that far with staying away. When I come across people IRL that want to start doing this stuff I always tell them to read the instructions, step through them, read the instructions again, ask questions (as you did here) BEFORE you get started, read the instructions again, and only when you're confident start messing with your device. This is a fun, and at times stressful, hobby. It's great when everything goes according to plan but it's an omg omg omg omg omg omg moment when you mess something up.
Start with baby steps. The straight upgrade to P is fairly simple provided your device is unlocked. Get that working & you'll be set. I have root on my DP3 & the only thing I've done so far is delete some apps from system that I know I don't want/need. If your main goal is to just enjoy your phone, test out Android P, and maybe go back... root isn't needed. Once everything is squared away & you're running for a day or so you can always fastboot to recovery, make a backup, and then try to add root. I hope you don't shy away & get deeper into the hobby. It truly starts to get fun when you begin to understand more of what is going on.
Click to expand...
Click to collapse
And it's as @EvilDobe means.....
I remember back in the days of the Motorola Droids (OG Droid1, Droid 3, & Droid 4) where you could really mess things up and come out with a big ol' "brick" "paperweight" as there were many instances where you could not come back from (i.e. updating to a certain point, then attempting to downgrade when Google/Motorola/Verizon put blocks that breaks it). But this isn't the case these days. @Jameswebb97, at least with the Pixel 2's, Oreo and/or P(Android OS 9), it's actually more difficult than easy to get that too far gone. The only reason why I can help so many troubleshooting their issues is because I, myself, have wrecked my current device in some serious ways! So I can relate and have experience in helping in the same situations. I've gotten it to where it says "device is corrupt," (which isn't all that uncommon), BUT with the added desperate troubleshooting where I had to wipe/erase, changing partition types, format several partitions, even go about "resizing" the partition to match the "target extraction size" of the Full Factory flash, and even as far as learning to manually flash the various system partitions and that there are two (system_a & system_b) but, in Google's infinite wisdom(?), one flashes to system_a and the other to system_other!!! And I haven't even started on reading others' issues when going after the Slot A and Slot B complications -- I didn't even attempt to touch this in that troubleshooting story.
My point is: I think I've broken my device farther than most people and got it so close to the brink, and yet I was able to bring it back and am still using that same device today (most people would usually, at that point, go and get a RMA replacement). Honestly, as long as you have access to Bootloader Mode (which Google, in their infinite wisdom, seems to have placed it in the main board memory or separate memory rather than storage as to make it always accessible which makes it hard to "lose"), you have a really good (seemingly perfect) "safety net" in which you can always flash back to a working, stock state -- which is why it's the best policy to just make good backups before experimenting so, if anything, you get back to this state and restore all your data. I'm not trying to convince you to root or to try custom ROMs or anything -- even though there are many great reasons and capabilities of rooting -- I am simply appealingl to your sense of curiosity and reassure you so you aren't held back and you don't restrict and limit yourself if you don't want to, but are to fearful to experiment.
I hope you don't take this post as "lecturing" or anything, just some thoughts I hope you consider...
Glad it worked out in the end for you!
I set up my new phone yesterday - rooted with some great help from folks on this forum. Everything was going smoothly and working properly until I did something (I was checking out All-in-One Toolbox and a screen popped up about a four-step process to select some particular 'file'). As a result, there are problems with my ability to access local files, for example:
When I open the built-in Files app, it displays an hourglass symbol with the message "Can't load content at the moment". Also, on the slide out panel, the icon that previously read 'Pixel 3XL' is missing.
When I tried to get a screen grab of the above, a notification indicated "Cannot save screenshot due to limited storage space".
When I launch Titanium Backup, it cannot find its backup folder.
Custom ringtones are not be used.
Note that when I use X-Plore, I can navigate to the 'SD Card' folder and all files are there. It is as if a 'symbolic link' was deleted.
Please help me resolve this problem!
groston said:
I set up my new phone yesterday - rooted with some great help from folks on this forum. Everything was going smoothly and working properly until I did something (I was checking out All-in-One Toolbox and a screen popped up about a four-step process to select some particular 'file'). As a result, there are problems with my ability to access local files, for example:
When I open the built-in Files app, it displays an hourglass symbol with the message "Can't load content at the moment". Also, on the slide out panel, the icon that previously read 'Pixel 3XL' is missing.
When I tried to get a screen grab of the above, a notification indicated "Cannot save screenshot due to limited storage space".
When I launch Titanium Backup, it cannot find its backup folder.
Custom ringtones are not be used.
Note that when I use X-Plore, I can navigate to the 'SD Card' folder and all files are there. It is as if a 'symbolic link' was deleted.
Please help me resolve this problem!
Click to expand...
Click to collapse
Just my 2 cents worth, but I've never been a fan of toolkits. They work great sometimes, but then again they don't at times. I think it's better to learn adb/fastboot on your own. I would recommend fastbooting the factory image again, without the -w, and see if that resolves your problem. Then leave well enough alone. And uninstall the toolkit app as well if that's what it is :good:
groston said:
I set up my new phone yesterday - rooted with some great help from folks on this forum. Everything was going smoothly and working properly until I did something (I was checking out All-in-One Toolbox and a screen popped up about a four-step process to select some particular 'file'). As a result, there are problems with my ability to access local files, for example:
When I open the built-in Files app, it displays an hourglass symbol with the message "Can't load content at the moment". Also, on the slide out panel, the icon that previously read 'Pixel 3XL' is missing.
When I tried to get a screen grab of the above, a notification indicated "Cannot save screenshot due to limited storage space".
When I launch Titanium Backup, it cannot find its backup folder.
Custom ringtones are not be used.
Note that when I use X-Plore, I can navigate to the 'SD Card' folder and all files are there. It is as if a 'symbolic link' was deleted.
Please help me resolve this problem!
Click to expand...
Click to collapse
What were you trying/wanting to do when "checking out" the toolkit? I agree with Badger about installing the factory image, but I would go one step further and leave the -w in place just running the flash-all as is. At some point when you have done some normal work on the phone, you can run it again without the -w so you can start to understand what is not deleted as well as how to re-root since you will need to do it every month. From your description, it sounds like you have deleted some stuff on the user side that would not be restored without the -w.
Gents,
I really did nothing with the toolkit other than a) look at the features it offered (was trying to discover which apps were running at boot time) and b) step through the one dialog that messed things up. As such, I would hate to have to reflash and start from ground zero again - especially when I get the sense that there is a simple fix that could resolve this specific issue. (Upon rereading Sliding_billy's response - it seems that reflashing does not impact user files - is this correct? After reflashing, I would have to boot to TWRP, reinstall Magisk, and everything would be good to go?)
FYI - the dialog in question is one that I had seen previously, when I updated my Note 4 from Android 4 to Android 5. It had something to do with selecting the DocumentsProvider location or some such (sorry that I am being so nebulous - I just did a quick search to try to find an example of the dialog, but did not).
groston said:
Gents,
I really did nothing with the toolkit other than a) look at the features it offered (was trying to discover which apps were running at boot time) and b) step through the one dialog that messed things up. As such, I would hate to have to reflash and start from ground zero again - especially when I get the sense that there is a simple fix that could resolve this specific issue. (Upon rereading Sliding_billy's response - it seems that reflashing does not impact user files - is this correct? After reflashing, I would have to boot to TWRP, reinstall Magisk, and everything would be good to go?)
FYI - the dialog in question is one that I had seen previously, when I updated my Note 4 from Android 4 to Android 5. It had something to do with selecting the DocumentsProvider location or some such (sorry that I am being so nebulous - I just did a quick search to try to find an example of the dialog, but did not).
Click to expand...
Click to collapse
Running the flash all with the -w in place will completely wipe your device. If you don't want that then remove the -w. But, without wiping the device there may be something left over that'll continue to cause you your current problem.
Sent from my [device_name] using XDA-Developers Legacy app
groston said:
Gents,
I really did nothing with the toolkit other than a) look at the features it offered (was trying to discover which apps were running at boot time) and b) step through the one dialog that messed things up. As such, I would hate to have to reflash and start from ground zero again - especially when I get the sense that there is a simple fix that could resolve this specific issue. (Upon rereading Sliding_billy's response - it seems that reflashing does not impact user files - is this correct? After reflashing, I would have to boot to TWRP, reinstall Magisk, and everything would be good to go?)
FYI - the dialog in question is one that I had seen previously, when I updated my Note 4 from Android 4 to Android 5. It had something to do with selecting the DocumentsProvider location or some such (sorry that I am being so nebulous - I just did a quick search to try to find an example of the dialog, but did not).
Click to expand...
Click to collapse
jd1639 said:
Running the flash all with the -w in place will completely wipe your device. If you don't want that then remove the -w. But, without wiping the device there may be something left over that'll continue to cause you your current problem.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Exactly what jd said. Running flash-all with no modifications will essentially do a factory restore of that build. Removing the -w (for wipe) from the batch file leaves the non-system files/settings, etc in place and you will then need to fastboot boot TWRP.img and install Magisk. As both of us mentioned, it may be best to get over the pain of a full image instead of seeing what issues remain without the -w in place in the batch. I think the real lesson here is that the folks who make these toolkits do a lot of hard work but it is still better/safer (especially on this device) to understand doing things manually.
I reflashed without the -w and everything seems to be fine. Thanks for the help!
OK so first of all, if this is the wrong place for this I'm sorry, it's quite late for me and I've been researching how to fix this for about two days and running up with nothing.
I recently upgraded to a Pixel 2XL, loving the device but unfortunately a couple of my apps save data into the data/data part of phone. The only way to then move that over and preserve the data is to use something like adb backup and restore. The backup seems to work fine, but so far every time I try to use restore on my pixel 2xl it 'ends' without actually adding the missing app data across.
I've tried using usb 2 and 3, no difference. I've made sure the usb debugging is on and that my phone is unlocked. I also made sure to try using the commands through both cmd and powershell and that both were in admin mode. I've also tried looking into other options like a friend suggested using es file explorer manager to change the download location, but I wasn't able to puzzle out a way to make something that was in data/data save elsewhere.
My phone isn't rooted, and I'd rather not go that far if I can help it. Any advice or ideas?
Aahhh,"...your phone isn't rooted..."that's probably it/key. I'm unsure whether any kind of "restore" works without root access -- backup of course works because that simply involves "copying" and "storing" files (essentially the basic process of backing up) and, as the system needs to be able to read and access the data, you pretty much have the "read access" to it. Restore on the otherhand, for those who are unaware, are essentially "copying" those stored files and "overwriting" the existing files -- which require "write access". The process of "rooting" is to acquire "root access" which allows both "read/write access" (therefore: "r/w access"). *again, for those who are unaware.
Sorry for just blabbering on about that, I guess I got carried away. In any case, basically (all in all, the reason why I blabbered on) I don't think you're going to go far without root access -- or "rooting" as you say -- but there is one thing I can suggest. When using adb, try running this command first before running any other adb command (i.e. restore):
Code:
adb root
It might just give you enough of that "root access" I was blathering about...
Also, among the all the things you made sure to do and include you made sure of, one thing you didn't mention is making sure you have the most up to date platform-tools (r28.0.1 *at least last I personally saw a few weeks ago).
Good luck to you, hope I made these things somewhat understandable, and hope this helped as well....
Thank you for the suggestions, tried it but no dice sadly. I kinda am hairy on rooting it too as I just got the phone and it's been a long time since I've done android dev work. If you have any other ideas I'd be welcome to hearing them but again thanks for trying.
simplepinoi177 said:
Aahhh,"...your phone isn't rooted..."that's probably it/key. I'm unsure whether any kind of "restore" works without root access -- backup of course works because that simply involves "copying" and "storing" files (essentially the basic process of backing up) and, as the system needs to be able to read and access the data, you pretty much have the "read access" to it. Restore on the otherhand, for those who are unaware, are essentially "copying" those stored files and "overwriting" the existing files -- which require "write access". The process of "rooting" is to acquire "root access" which allows both "read/write access" (therefore: "r/w access"). *again, for those who are unaware.
Sorry for just blabbering on about that, I guess I got carried away. In any case, basically (all in all, the reason why I blabbered on) I don't think you're going to go far without root access -- or "rooting" as you say -- but there is one thing I can suggest. When using adb, try running this command first before running any other adb command (i.e. restore):
Code:
adb root
It might just give you enough of that "root access" I was blathering about...
Also, among the all the things you made sure to do and include you made sure of, one thing you didn't mention is making sure you have the most up to date platform-tools (r28.0.1 *at least last I personally saw a few weeks ago).
Good luck to you, hope I made these things somewhat understandable, and hope this helped as well....
Click to expand...
Click to collapse
Where your bootloader is apparently unlocked, download a TWRP recovery image to the directory fastboot is in and boot it using the fastboot command "fastboot boot twrp.img". From there, take a nandroid backup of your device. Restoring is done in the same fashion. AND, since TWRP is memory resident when booting it this way, the stock recovery remains untouched.
Strephon Alkhalikoi said:
Where your bootloader is apparently unlocked, download a TWRP recovery image to the directory fastboot is in and boot it using the fastboot command "fastboot boot twrp.img". From there, take a nandroid backup of your device. Restoring is done in the same fashion. AND, since TWRP is memory resident when booting it this way, the stock recovery remains untouched.
Click to expand...
Click to collapse
Great idea! And that's why veterans and those with experience are the best to go to...!
OK so first, thank you so much for all the advice. I've taken awhile to get back to you because this took some time to parse. I'm admittedly kind of a novice at this. So I've used the instructions here https://www.xda-developers.com/how-to-install-twrp/ to try and install twrp. I think I did it right, had the zip contents and img file in the same directory that adb is in, then ran the command...and this is what I got back.
N:\platform-tools>fastboot flash recovery twrp-3.2.3-1-taimen.img
Sending 'recovery' (40960 KB) OKAY [ 1.203s]
Writing 'recovery' FAILED (remote: 'Flashing is not allowed in Lock State')
Finished. Total time: 1.219s
as the 'fastboot reboot' command appeared to bring me right back to normal operating for the phone I'm guessing the failed stopped me with that 'flashing not allowed in lock state' there. Am I missing a step?
close, but not exactly right...
you got the downloading platform tools right, and putting the necessary files in that same folder that fastboot.exe resides in also right (you wouldn't believe how many novices actually make the mistake of not doing this)...
but you don't ever (underlined and emphasized not really for you AshtonHunter, but for any who are under the wrong impression; it's caused endless headaches and has even been complained by developers on Twitter...) "fastboot flash" TWRP with Pixels (any; and AFAIK any a/b slotted devices). You boot the twrp .img file. Also, for those who do not know and for future reference, there is no "recovery" for fastboot to "flash" to on Pixels (any), as there no longer is a separate partition for recovery; recovery resides in the boot partition. All in all, the command should be exactly this:
Code:
fastboot boot twrp-3.2.3-1-taimen.img
Immediately afterwards, you'll see your Pixel 2 XL restart and load up TWRP...
Good luck to you and hope this helps...
Hey everyone. So I tried this but it also didn't work. Same error 'cannot in locked state' when trying to run the command. I do notice there's a green 'locked' on my phone when it's in the screen after the 'adb reboot bootloader' command. Any ideas?
simplepinoi177 said:
close, but not exactly right...
you got the downloading platform tools right, and putting the necessary files in that same folder that fastboot.exe resides in also right (you wouldn't believe how many novices actually make the mistake of not doing this)...
but you don't ever (underlined and emphasized not really for you AshtonHunter, but for any who are under the wrong impression; it's caused endless headaches and has even been complained by developers on Twitter...) "fastboot flash" TWRP with Pixels (any; and AFAIK any a/b slotted devices). You boot the twrp .img file. Also, for those who do not know and for future reference, there is no "recovery" for fastboot to "flash" to on Pixels (any), as there no longer is a separate partition for recovery; recovery resides in the boot partition. All in all, the command should be exactly this:
Code:
fastboot boot twrp-3.2.3-1-taimen.img
Immediately afterwards, you'll see your Pixel 2 XL restart and load up TWRP...
Good luck to you and hope this helps...
Click to expand...
Click to collapse
AshtonHunter said:
OK so first of all,
if this is the wrong place for this I'm sorry, it's quite late for me and I've been researching how to fix this for about two days and running up with nothing.
I recently upgraded to a Pixel 2XL, loving the device but unfortunately a couple of my apps save data into the data/data part of phone. The only way to then move that over and preserve the data is to use something like adb backup and restore. The backup seems to work fine, but so far every time I try to use restore on my pixel 2xl it 'ends' without actually adding the missing app data across.
I've tried using usb 2 and 3, no difference.
I've made sure the usb debugging is on and that my phone is unlocked. I also made sure to try using the commands through both cmd and powershell and that both were in admin mode. I've also tried
looking into other options like a friend suggested using es file explorer manager to change the download location, but I wasn't able to puzzle out a way to make something that was in data/data save elsewhere.
My phone isn't rooted, and I'd rather not go that far if I can help it. Any advice or ideas?
Click to expand...
Click to collapse
AshtonHunter said:
Hey everyone. So I tried this but it also didn't work. Same error 'cannot in locked state' when trying to run the command. I do notice there's a green 'locked' on my phone when it's in the screen after the 'adb reboot bootloader' command. Any ideas?
Click to expand...
Click to collapse
You would only get this error if your device isn't "unlocked"... I/we were all under the impression that (which is why I quoted) your device is "unlocked"... So maybe some clarification is in order...
There are two types of "unlocking" that can be attributed to the device; 1) your device can be "locked" to a carrier or global region, and it can be "unlocked" so the device can be used on any network anywhere, and 2) all Pixel's (and all smartphones AFAIK) have their bootloader in a locked state, and in order to do any kind of "rooting" or data restore/recovery or modification down to the system level you have to "unlock" the bootloader or have it in an "unlocked" state.
*BEWARE! Before running these commands, please note that running critical will erase/wipe EVERYTHING -- I am pretty sure running both will actually cause this to happen.
Considering all of this, when you said your "...phone is unlocked", you are speaking in terms of #2 I listed above, correct? Basically, you have run the command -- while in Bootloader Mode -- "fastboot flashing unlock" & (just as important, imho) "fastboot flashing unlock_critical", right? Because, if you haven't done these, then your device was never "unlocked" (in the sense that most relates to us and what you are intending) as well as without having one these commands, you had no chance at restoring your /data folder or partition "data" (pun not intended).
After clearing any misunderstanding and/or issues of these type, we might be able to better help after that point...but it is looking like you may need to root or at least do the same steps towards that end to accomplish what you are seeking...
So, get back to me/us on this, and hope this all helps...
Ok! So after confirming I could do it without any issue and having a day of time to work on it, my phone's bootloader is now unlocked and I've managed a backup using TWRP. Only thing now is I'm not entirely sure what I should be looking at and how in here. Advice is welcome but I'm going to be digging into it myself to see if I can puzzle it out with some friends of mine online. Also just again thank you all for all the assistance. I would have never gotten this far with it without you all!
AshtonHunter said:
Ok! So after confirming I could do it without any issue and having a day of time to work on it, my phone's bootloader is now unlocked and I've managed a backup using TWRP. Only thing now is I'm not entirely sure what I should be looking at and how in here. Advice is welcome but I'm going to be digging into it myself to see if I can puzzle it out with some friends of mine online. Also just again thank you all for all the assistance. I would have never gotten this far with it without you all!
Click to expand...
Click to collapse
What exactly are you wanting to do now that your bootloader is unlocked, and you have twrp? Can I assume you want to root it?
AshtonHunter said:
Ok! So after confirming I could do it without any issue and having a day of time to work on it, my phone's bootloader is now unlocked and I've managed a backup using TWRP. Only thing now is I'm not entirely sure what I should be looking at and how in here. Advice is welcome but I'm going to be digging into it myself to see if I can puzzle it out with some friends of mine online. Also just again thank you all for all the assistance. I would have never gotten this far with it without you all!
Click to expand...
Click to collapse
I'm glad you were successfully able to get it done! (clicking a "Thanks!" would be all I would welcome in return)
So, now, you might be able to successfully do what you originally did and restore through adb if you wish...I mean, if you simply have a /data folder that's been backed up, there might not be too many options available for you. Another thing you might try is running a custom recovery (TWRP I believe is the best or only) and restoring -- and/or backing up from your old device/phone, wiping everything, setting phone up, then use that TWRP backup to restore -- but you can only really run a restore if it was a TWRP backup to begin with... One other good way is running a Titanium Backup backup and restoring that way...
Good luck and hope this helps...
please help
simplepinoi177 said:
Aahhh,"...your phone isn't rooted..."that's probably it/key. I'm unsure whether any kind of "restore" works without root access -- backup of course works because that simply involves "copying" and "storing" files (essentially the basic process of backing up) and, as the system needs to be able to read and access the data, you pretty much have the "read access" to it. Restore on the otherhand, for those who are unaware, are essentially "copying" those stored files and "overwriting" the existing files -- which require "write access". The process of "rooting" is to acquire "root access" which allows both "read/write access" (therefore: "r/w access"). *again, for those who are unaware.
Sorry for just blabbering on about that, I guess I got carried away. In any case, basically (all in all, the reason why I blabbered on) I don't think you're going to go far without root access -- or "rooting" as you say -- but there is one thing I can suggest. When using adb, try running this command first before running any other adb command (i.e. restore):
Code:
adb root
It might just give you enough of that "root access" I was blathering about...
Also, among the all the things you made sure to do and include you made sure of, one thing you didn't mention is making sure you have the most up to date platform-tools (r28.0.1 *at least last I personally saw a few weeks ago).
Good luck to you, hope I made these things somewhat understandable, and hope this helped as well....
Click to expand...
Click to collapse
sorry in advance, I'm not very familiar with this webiste.
Im in a similar situation where it wont let me restore my adb backup, I am rooted and the bootloader is unlocked (though twrp is not installed). could you please help, i beg you.
I rebooted in to recovery (B partition) from custom ROM , ran Migrator Magisk module twice (as directions say-second run does FDR), booted into A partition of my Pixel XLto flash new ROM and for some reason EVERYTHING is encrpyted (do not have screen lock or pin applied) ..... I remember seeing something like this when I first got the device but cant recall how to deal with it.
Every attempt to adb sideload, adb push , etc not working ....
C.Hatfield said:
I rebooted in to recovery (B partition) from custom ROM , ran Migrator Magisk module twice (as directions say-second run does FDR), booted into A partition of my Pixel XLto flash new ROM and for some reason EVERYTHING is encrpyted (do not have screen lock or pin applied) ..... I remember seeing something like this when I first got the device but cant recall how to deal with it.
Every attempt to adb sideload, adb push , etc not working ....
Click to expand...
Click to collapse
So, I take it you were trying to 'migrate' to another ROM?
My suggestion is this, use this guide: https://forum.xda-developers.com/pixel-xl/how-to/guide-pixel-xl-android-9-0-pie-unlock-t3825866/
- Start fresh
- Do #4 'wipe data'
was just using the magisk migrator module - it backed up all my files on 1st run, then 2nd run it did FDR .... I would REALLY prefer not wiping my internal/sdcard ..... everything is still there but encrypted, unusable for the moment - hoping there is a workaround bc Ihave sooo much data that I havent backed up externally/cloud for a month or 3 .... got nothing I can boot from as well as no access to ALL the tons of stuff stored on my phone to flash .... was thinking to use Factory image but removing the [-w] from the bat file ..... would that work to keep my data integrity ?
Honestly, im wondering how things got encrypted when the process (xc for what im unsure the mod did extra besides FDR) is practically, if not identical, to the normal protocol for wiping>flashing for PIXEL XL
C.Hatfield said:
was just using the magisk migrator module - it backed up all my files on 1st run, then 2nd run it did FDR .... I would REALLY prefer not wiping my internal/sdcard ..... everything is still there but encrypted, unusable for the moment - hoping there is a workaround bc Ihave sooo much data that I havent backed up externally/cloud for a month or 3 .... got nothing I can boot from as well as no access to ALL the tons of stuff stored on my phone to flash .... was thinking to use Factory image but removing the [-w] from the bat file ..... would that work to keep my data integrity ?
Click to expand...
Click to collapse
...would that work to keep my data integrity ? Yes
will the modded flash-all.bat actually work with all the contents of the internal drive being encrypted?
I only ask bc of all the research Ive been doing for the last 4 hours, I had no idea that the current TWRP [3.2.3.1] made decryption on PIe possible .... I not ref to the PIN/lockscreen/Fingerprint decrypt either > more like decrypting the System partition like with Shamu/N6
**Also** found this during my harried research:
Encrypting does not completely delete the files, but the factory reset process gets rid of the encryption key. As a result, the device has no way it can decrypt the files and, therefore, makes data recovery extremely difficult.
C.Hatfield said:
will the modded flash-all.bat actually work with all the contents of the internal drive being encrypted?
I only ask bc of all the research Ive been doing for the last 4 hours, I had no idea that the current TWRP [3.2.3.1] made decryption on PIe possible .... I not ref to the PIN/lockscreen/Fingerprint decrypt either > more like decrypting the System partition like with Shamu/N6
**Also** found this during my harried research:
Encrypting does not completely delete the files, but the factory reset process gets rid of the encryption key. As a result, the device has no way it can decrypt the files and, therefore, makes data recovery extremely difficult.
Click to expand...
Click to collapse
Yes!
Yes, twrp-3.2.3-1 decrypts.
"**Also** found this during my harried research:
Encrypting does not completely delete the files, but the factory reset process gets rid of the encryption key. As a result, the device has no way it can decrypt the files and, therefore, makes data recovery extremely difficult."
Where did you find that? Link please.
Homeboy76 -
Very much appreciate the feedback !! This is the longest downtime I've experienced, likely-ever but I just couldn't make another move until I was certain it was the correct one.
Here is the link where I found the above info you asked about:
https://android.stackexchange.com/questions/149219/android-decrypt-sd-card-after-factory-reset?rq=1
C.Hatfield said:
Homeboy76 -
Very much appreciate the feedback !! This is the longest downtime I've experienced, likely-ever but I just couldn't make another move until I was certain it was the correct one.
Here is the link where I found the above info you asked about:
https://android.stackexchange.com/questions/149219/android-decrypt-sd-card-after-factory-reset?rq=1
Click to expand...
Click to collapse
Edit: Wrong link, it happens.
this is what it shows me:
It is in the default factory reset state ( like a new device ). You can't decrypt the device even if you wish to as the encryption password (generated from a combination of user lock screen PIN and encryption algorithm ) is lost
From Android's Factory Reset Does Not Wipe Your Data: Here's The Solution
Encrypting does not completely delete the files, but the factory reset process gets rid of the encryption key. As a result, the device has no way it can decrypt the files and, therefore, makes data recovery extremely difficult.
C.Hatfield said:
this is what it shows me:
It is in the default factory reset state ( like a new device ). You can't decrypt the device even if you wish to as the encryption password (generated from a combination of user lock screen PIN and encryption algorithm ) is lost
From Android's Factory Reset Does Not Wipe Your Data: Here's The Solution
Encrypting does not completely delete the files, but the factory reset process gets rid of the encryption key. As a result, the device has no way it can decrypt the files and, therefore, makes data recovery extremely difficult.
Click to expand...
Click to collapse
Yes, if you use this url: https://www.techtimes.com/amp/artic...oes-not-wipe-your-data-heres-the-solution.htm but that is not the url that was in your previous post. This is, https://android.stackexchange.com/questions/149219/android-decrypt-sd-card-after-factory-reset?rq=1
I think it is out dated: Android's Factory Reset Does Not Wipe Your Data: Here's The Solution By Anu Passary | May 27, 2015 11:07 PM EDT
hey homeboy76 tried the flash-all bat [-w removed] and the process went through w/o any issues but it immediately rebooted itself and within 30 seconds landed on the stock recovery & it said file may be corrrupt, TRY AGAIN or FDR ....
Do I have any other recourse to save my 100 GBs of data ??? or do I onlly have the unmoddded flash-all -w to do at this point ?
C.Hatfield said:
hey homeboy76 tried the flash-all bat [-w removed] and the process went through w/o any issues but it immediately rebooted itself and within 30 seconds landed on the stock recovery & it said file may be corrrupt, TRY AGAIN or FDR ....
Do I have any other recourse to save my 100 GBs of data ??? or do I onlly have the unmoddded flash-all -w to do at this point ?
Click to expand...
Click to collapse
Did you check the SHA256 of the March 2019 factory image?
I don't think it would hurt to try again. If it doesn't work you can try FDR or flash-all with [ -w] both will erase your internal storage.
Homeboy76 said:
Did you check the SHA256 of the March 2019 factory image?
I don't think it would hurt to try again. If it doesn't work you can try FDR or flash-all with [ -w] both will erase your internal storage.
Click to expand...
Click to collapse
Soooo, check this out .... I finally got a flash-all {no -w] to work and my phone booted - buuuuut it is STILL ENCRYPTED .... opening the root//file explorer I was horrified to see that everything is still encrypted .... it's soooo bizarre. apps from PS are restoring but I cannot get screenshots to save nor can I move any files from my laptop to my Pixel Xl. I wanted screeenshots so bad to show/post this bizarreness but -no- ....
I havent tried to boot into recovery yet or anything else .... so I dont even have root to look any deeper into the partitions. I was wondering if Titanium Backup would run and populate with proper app names, etc
Any more ideas from this unprecedented point bro >? BTW, the SHA256 was good/clean/proper.
BTW, when you flash a factory image, which facking partition (A or B) -should it- be flashed to or flashed "from" - I've let myself get quite confused >???? I have researched & read sooo much, my brain hurts (& is literally fried) .... I figured I would ask you so I could possibly get some firsthand clarification.
C.Hatfield said:
Soooo, check this out .... I finally got a flash-all {no -w] to work and my phone booted - buuuuut it is STILL ENCRYPTED .... opening the root//file explorer I was horrified to see that everything is still encrypted .... it's soooo bizarre. apps from PS are restoring but I cannot get screenshots to save nor can I move any files from my laptop to my Pixel Xl. I wanted screeenshots so bad to show/post this bizarreness but -no- ....
I havent tried to boot into recovery yet or anything else .... so I dont even have root to look any deeper into the partitions. I was wondering if Titanium Backup would run and populate with proper app names, etc
Any more ideas from this unprecedented point bro >? BTW, the SHA256 was good/clean/proper.
BTW, when you flash a factory image, which facking partition (A or B) -should it- be flashed to or flashed "from" - I've let myself get quite confused >???? I have researched & read sooo much, my brain hurts (& is literally fried) .... I figured I would ask you so I could possibly get some firsthand clarification.
Click to expand...
Click to collapse
I can't help you with the file encrypted problem. I've never read about anything like the problem you're having with encryption. TB might work. If your files are backed up on your computer, FDR.
https://forum.xda-developers.com/showpost.php?p=79273902&postcount=481
@C.Hatfield, continuing the discussion...
Topics
1) Forced encryption
2) Output of ls /data/misc/vold/*
3) Advanced approach
VR25-
First, I'll start with a sincere Thank You - I know you're busy with school & life, so I appreciate that you take the time to create such beneficial tools like Migrator. Having used Android OS since it's inception, I've learned a whole lot & seen a whole lot buuut not this craziness. I was unable to get any actionable help within the 2 weeks that I held out doing a full FDR ....
alas, I finally relented & did a full FDR with a full on flash-all.bat & ironically, it was only a couple hours before your response. I didn't read the response until now because I was afraid you'd posted an A, B, C unencryption method for me - in a small way, I'm glad it isn't that lol ....
As for the "did you..." questions you asked in Migrator thread, I followed my usual protocol & did not vary at all, except running the Migrator script 2x's before trying to install new ROM.