Related
What's bugging me about my brand new Xperia X? The overall low volume.
These simple tweaks, this mod if you may, simply modifies a few lines from the stock audio config files which, after a reboot make your speakers louder and headphones, a bit too loud (but I didn't hear anyone complaining about Xperias for being too loud lol)!
It's for rooted users only and for me it sounds a lot better than using (possibly) unstable sound mods instead of simply adjusting the volume on some pretty decent stock drivers.
It's been tested against 34.0.A.2.301 - but it should be backwards compatible..
UPDATE:
Stereo in-call Voice-Speaker now working;
It should be compatible with N - test it with a backup at hand - I'm on MM because of Xposed;
Stereo for Ringtone-speaker is WIP - feel free to jump in and help ;
Features:
Louder Stereo Speaker sound system wide;
Louder Headphone sound;
Stereo Voice-Speaker for calls;
WIP for Stereo Ringtone-speaker - I'm open to suggestions!
Customizable as you see fit! Just stick to the already explored options.
Conflict-free tweaks - no additional files added, no nothing, just some modified lines - you can trust it .
Installation:
By flashing the .zip with FLASHFIRE [press the red "+" button > Flash ZIP or OTA > leave the options as they are and Click on the "done arrow thingy".
Manually copying the file to /etc - DO NOT forget to set the right permissions (RW R R). Please take a look over the Permissions.png screenshot in case you don't know how to set them - you long click on the file, then go to properties and you'll see the permissions button.
Do it yourself - there's a guide down bellow.
Bugs: -None-
If you have ideas for this, PM me!
In the download section you'll find:
>>Flashable! already modified "Xperia X Getting Loud.zip" with: SPEAKER values - 85 for both RX7/RX8 and HEADPHONE values - 85 for RX1/RX2.
>>Flashable! Stock Values - it's the stock file unmodified.
>>NON-Flashable! zips - there you have 1 zip for the modified file and the stock one so you can place it manually via ES file explorer or the explorer of your choosing.
**And some screenshots that are pretty self explanatory showing you what modifications need to be made if you want to do it yourself.
DIY Guide (using ES File Explorer):
You're probably acquainted with ES File Explorer so it should be pretty simple. The modifications I made were done with ES (it has an built-in editor).
1. Make sure the Root Explorer toggle is On - it's located in the Tools tab as you swipe the left side of the screen;
2. Go to the root of the files where you'll see folders such as "data; dev; firmware; storage; system; etc" go to "etc" folder and scroll down till you see the mixer_paths files;
3. Open "mixer_paths_wcd9335" and at the prompt, select ES Note Editor - it's a huge file so tap right above the navigation bar! A bar with percentage should show up - it will help you navigate through the file;
4.1 Speakers - Get to 42% of the file where you should see the path for "wsa-speaker", ctrl name RX7 and RX8 with their stock values - modify the values as you please but please don't go over 86 - sound will be too distorted;
4.2 Headphones - Go to 53% of the file - you'll see "headphones-regulation" path - ctrl name RX1 and RX2 - modify the values but anything more than 85 might be too much.
4.3 New! Stereo Voice-Speaker - find the path for Voice-speaker as seen in screenshot and simply add some volume there - default is 0 - I'd advise to go lower on that speaker since the mic used for speaker calls is located near the earpiece - so values around 80-82 should be ideal.
5. Save and reboot. If you choose to modify the files on a PC make sure to set the permissions when you put the file back. Otherwise bootloops might occur.
***Internal players such as Music, Video, ringing and notification will try to compensate the sound so it might not be as loud as expected. But try a youtube video and you'll notice the difference.
***Do not attempt to modify something else unless you know what you're doing - on that note, make a backup first. In my first attempts I lost sound device wide with FC for sound effects apk.
***Do not go over the values I imputed (85 for speaker and 85 for headphone) - apart from the distortions that will occur because of the louder volume the internal DAC might not be able to reproduce the sound at such intensity - in my tests one of the speakers was shutting down. Again, no harm can come to your device but don't push it.
***I saw a lot of sections for hi-res headphones, Noise cancelling, etc - I did not explore those options because I don't have the means to test it. Any input and contributions from you guys are most welcome.
These files control the volume output for digital / analog which means it's a non-intrusive way to change volumes with no harm for the device. If volume limit exceeds the capacity of the speakers it will sound bad but there is no chance for physical damage.
I'm coming from a highly modded Xperia Z (that phone saw some torture) which made use of the earpiece speaker for stereo, and even if the speakers aren't designed for that output they are louder than the X which packs pretty decent speakers. This is the mod that gave me the idea: http://forum.xda-developers.com/xperia-z/themes-apps/mod-stereomod-xz-v1-1-t2835995 @monivan
Click to expand...
Click to collapse
Don't forget to hit Thanks!
Cheers and happy new year!
Files also available in this Box.com folder: https://app.box.com/s/0oibhyojbwhrwxyyglpzd63sihsigeu5
Thank you so much for this great mod.
Oel said:
Thank you so much for this great mod.
Click to expand...
Click to collapse
You're welcome but I just updated the files..... Speaker was just a bit too loud. I decreased the values a bit because a notification was distorting the speakers. Use the update if you feel like it's too much.
Good work!
UPDATE 1.2
Stereo Voice-Speaker for calls;
WIP for Stereo Ringtone-speaker - I'm open to suggestions!
File: 'Xperia X Loud + Stereo voice-spkr.zip' - flash it, explore it, enjoy!
Sebi673 said:
Stereo Voice-Speaker for calls;
WIP for Stereo Ringtone-speaker - I'm open to suggestions!
File: 'Xperia X Loud + Stereo voice-spkr.zip' - flash it, explore it, enjoy!
Click to expand...
Click to collapse
<path name="voice-speaker">
<path name="speaker" />
<ctl name="RX7 Digital Volume" value="82" />
</path>
I don't see a line here that you can add a value greater than 0 to in order to get both speakers working.
agentsmith988 said:
<path name="voice-speaker">
<path name="speaker" />
<ctl name="RX7 Digital Volume" value="82" />
</path>
I don't see a line here that you can add a value greater than 0 to in order to get both speakers working.
Click to expand...
Click to collapse
I PMd you to debunk this whole thing. As for the rest of you, watch out for bootloops if you try something new...
f5122 can use it?
FuLiterary said:
f5122 can use it?
Click to expand...
Click to collapse
I don't have one. Backup the file and look if it uses the same one. It should though. Look through the guide, you'll know what to look for.
can it be used on xperia x compact? thank you very much
Does this work with the X COMPACT as well?
stevuna said:
can it be used on xperia x compact? thank you very much
Click to expand...
Click to collapse
CPH_game_master said:
Does this work with the X COMPACT as well?
Click to expand...
Click to collapse
Files should be different on your device. I no longer have the X, nor the X Compact, so this mod could not work.
Use the guide instead, it's pretty easy to make the modifications on your own. All you need is ES file explorer or something similar. Always keep a backup ready to flash.
Hello! Is it possible to enable stereo voise without increasing volume?
Kernels don't support it, at least Franco and E-X don't, so any way to Increase the volume dB of the loudspeaker? The output of it is really clean but more loudness (without any crackling though) will certainly do. Anyone using any mod or something like that? Not really looking for something complicated like editing some text values or anything.
ithehappy said:
Kernels don't support it, at least Franco and E-X don't, so any way to Increase the volume dB of the loudspeaker? The output of it is really clean but more loudness (without any crackling though) will certainly do. Anyone using any mod or something like that? Not really looking for something complicated like editing some text values or anything.
Click to expand...
Click to collapse
I would like to know this, too. Rings and notification sounds are not loud enough to hear well, even @Max Volume. I don't mind editing a file if I knew what file & what part to edit.
Install the Viper Driver. It resolved that issue for me.
https://forum.xda-developers.com/pixel-xl/themes/mod-weta-ui-mods-t3491181
Shawn haz root said:
Install the Viper Driver. It resolved that issue for me.
https://forum.xda-developers.com/pixel-xl/themes/mod-weta-ui-mods-t3491181
Click to expand...
Click to collapse
Can I install Viper from their topic itself? I don't all the other stuffs in this mod.
ithehappy said:
Can I install Viper from their topic itself? I don't all the other stuffs in this mod.
Click to expand...
Click to collapse
Yes, boot into TWRP and flash this zip. When you do an installer starts up and you can pick and choose the mods to flash. I would also flash the battery icon mod so you can change the battery icons to something with a more visible percentage.
Last time I tried Viper, it made the loudspeaker get loud sooner. Such as volume level 50% was louder after the mod.
But overall volume was the same at 100%. I used an SPL meter and test tones to verify.
CZ Eddie said:
Last time I tried Viper, it made the loudspeaker get loud sooner. Such as volume level 50% was louder after the mod.
But overall volume was the same at 100%. I used an SPL meter and test tones to verify.
Click to expand...
Click to collapse
.
Ah, bummer . . . I'm one of those joe schmoes who has crappy ears.
On that link to the mod package . . . ( thank you very much @Mentalmuso ! ! ! )
It lists :
mods...
V4A 2.5.0.5 or 2.3.4.0
Dolby Atmos
Sony Xperia™ Z5 Premium audio system
Beats™ libraries and effects
WETA Reboot app
3Minit Battery
Center Clock
NavBar height
Disabled high volume warning
Allow All rotations
Screen on when unplugged disabled
.
Um, it lists two V4A mods . . . Do you remember which one you tested ?
CZ Eddie said:
Last time I tried Viper, it made the loudspeaker get loud sooner. Such as volume level 50% was louder after the mod.
But overall volume was the same at 100%. I used an SPL meter and test tones to verify.
Click to expand...
Click to collapse
Hmm OK. So basically no way then!
I was just sharing my experience from a while back. Have not tested recently. I don't remember which Mentalmuso package, sorry.
Edit, I'm fairly sure it was the higher numbered version.
Coming from a 6p where I was able to edit a couple values in mixer_paths.xml to increase output volume. Once I got the PXL rooted I was unable to get the same results modifying values in the system files, but the directory seems to be set up differently and I found multiple locations with a mixer paths file and didn't want to go through all of them in a trial and error.
Is there a mixer paths file that I can edit and increase the volume? If not, is there another method to increase volume? I looked into some audio mods(Viper4Android) but couldn't get them to work, seemingly because in on 8.0.
EDIT: I'm looking to increase volume in Play Music, I heard another file(maybe audio effects) may effect it's volume independently of mixer paths.
Did you ever find a solution? I'm running a nougat ROM, and changes to the mixer_paths file in /system/etc have no effect. I even made some drastic changes to test and no effect. I've successfully modified mixer_paths before on other phones, so I have some idea what I'm doing, but this thing has me scratching my head.
It's like the phone doesn't use that file. There has to be one somewhere...
Follow this guide worked flawlessly for me when I was on 8.0 to have Viper4Android. (on 8.1 preview right now so can't have it) https://forum.xda-developers.com/pixel-xl/how-to/guide-how-to-install-arise-pixel-xl-t3677238
loeffler23 said:
Follow this guide worked flawlessly for me when I was on 8.0 to have Viper4Android. (on 8.1 preview right now so can't have it) https://forum.xda-developers.com/pixel-xl/how-to/guide-how-to-install-arise-pixel-xl-t3677238
Click to expand...
Click to collapse
Man I wish you'd posted this sooner. I just updated my phone to 8.1 yesterday. Are you sure the process isn't the same getting it to work or is an update necessary from Viper before it can be loaded?
TBacker said:
Did you ever find a solution? I'm running a nougat ROM, and changes to the mixer_paths file in /system/etc have no effect. I even made some drastic changes to test and no effect. I've successfully modified mixer_paths before on other phones, so I have some idea what I'm doing, but this thing has me scratching my head.
It's like the phone doesn't use that file. There has to be one somewhere...
Click to expand...
Click to collapse
I never found anything that worked for me. Another poster replied right after you posted with a method to get Viper4Android on 8.0. I've already upgraded to 8.1, but maybe that will work for you.
mbp1865 said:
I never found anything that worked for me. Another poster replied right after you posted with a method to get Viper4Android on 8.0. I've already upgraded to 8.1, but maybe that will work for you.
Click to expand...
Click to collapse
I mean tbh you can always try it,the worst that happens is it doesn't work you reflash the thing and just click unistall on the ones you installed, Lemme know if it works for you.
I'm aware of viper. I like to use it lightly for multimedia, but I don't like having to leave Selinux permissive.
Using Viper to boost levels works by doing some heavy compression & limiting which I'm personally not a fan of. I prefer the final gain be higher on the speaker / earpiece amps, but the audio system on PXL roms seems to have limited gain adjustment options that work (mixer_paths).
My biggest issue was earpiece / handset gain (I work in noisy environments). I'm using the ElementalX kernel now which has a gain adjustment that works.
Roddy 84:lo encontre en system/vendor/etc/mixer-paths esto es en android 8.1.0 oreo
Hi.
Is there a way to increase bluetooth headphones volume? To listen to music louder. Android 8.1
Hello Everyone,
I hope you all are great...
It is sad that the thread got 1 Star rating before even getting the chance of doing something good, well I'll fight my way up...
Snapdragon doesn't have Root, but hopefully in the future it will...
This thread isn't for how to TWRP/Magisk,Bootloader unlock or Root...
PLEASE GIVE ME YOUR FEEDBACKS IN ORDER TO IMPROVE THE MOD...
Don't Forget to say :good: THANKS :good:
EXYNOS: I have made SoundMod Magisk Module by Modifying mixers_path.xml & mixers_gain.xml provided by mkc1130 via his system dump...
SNAPDRAGON: Waiting for either system dump or someone with snapdragon device
XDA-Forum-Moderator @TheMadScientist have reopened the thread, thank you...
Download below:
Google Drive - Samsung Galaxy S9/S9+ - Volume Gain - SoundMod
!!! ALWAYS MAKE BACKUP OF YOUR FILES BEFORE REPLACING THEM !!!
If you didn't, no worries I have Attached Original Mixers as Backup (EXYNOS & SNAPDRAGON <-- snappy coming soon)...
first get ROOT :laugh: then proceed below
You can Use it with MAGISK
or
Flash it with TWRP, Snapdragon can use Flashfire (Snappy coming soon)
or
Just extract the MANUAL and place the mixers in your system/vendor/etc (since you chose Manual, make a backup, even though I put original mixers online) & set permissions to 644 (rw-r--r--) ...
reboot...
Let me know if you face any issues...
SNAPDRAGON MOD Status:
Not yet, not yet, maybe in a month or two ... or as soon I get the files, BOOM it will be here :victory:
EXYNOS Module Status: being tested
V1 - > Initial release, Tested & Stable...
VERY VERY VERY IMPORTANT NOTICE:
READ TO THE END...
This MOD shouldn't be used with any Equalizers, until it has been tested, even though I used MAX default values Available in the mixer, I don't want your brand new phone earpiece to be blown...
After installing the MOD, mute your phone, play a music, gradually increase the volume level till you reach the max, while doing that if you notice Any Noise/crackles/unclear sound from the earpiece, STOP increasing the volume, decrease it and report back please so I'd adjust the volume level...
Volume Adjust
(I AM NOT RESPONSIBLE FOR ANY DAMAGE):
SNAPDRAGON: to Adjust: (coming sooooooon :silly
EXYNOS: to Adjust in mixer_gains.xml:
Code:
<path name="gain-media-dual-speaker"> <!--Speaker, Stereo Dual-Channels-->
<ctl name="SPK Analog Left Gain" value="15dB" /><!--Speaker default for left channel-->
<ctl name="SPK Analog Right Gain" value="15dB" /><!--Speaker default for right channel, Earpiece-->
</path>
<path name="gain-media-headset"> <!--Headphones, Everything is default-->
<ctl name="HPOUT2L Impedance Volume" value="107" />
<ctl name="HPOUT2R Impedance Volume" value="107" />
<ctl name="HPOUT2L Input 1 Volume" value="32" />
<ctl name="HPOUT2R Input 1 Volume" value="32" />
</path>
Values for the speaker:
15dB is the default and from what it seems the earpiece should be as strong as the speaker to be able to have equal value, but I'd still say be cautious...
In many cases, the increase is safe up-to 6dB anything above that is Dangerous... 6 may look small but in terms of Sound, decibels are measured on a logarithmic scale..
say we have 10 dB and 18dB, the percentage from 18dB to 10dB would be about 83% sound decrease...
now back to the value, it looks so small, 15 dB is barely hearable, yes, but that's not the actual value but additional value...
in other words, 15dB+ to the current Volume...
Values for Headphones:
Gradually Change value="32" to whatever you desire upto 60, SAFEZONE is 45, if you hate yourself and ears, go above that :silly:...
as well value="107" upto 140, SAFEZONE is 120 as I said if you hate go up :silly:...
SAFEZONES are Approximated by me, So Gradually increase your volume to the max, make sure the sound is clean, don't set it to the max limit, some music are amplified by default, which playing them will damage the speakers, just be reasonable...
Don't Forget to say :good: THANKS :good:
Again I Say Please, your Feedbacks are important for futuristic updates to improve the MOD...
This module works in S8+ Oreo?
(23/03/2018)
--- initial release, sorry for the link delay...
(19/03/2018)
--- TWRP updated again, it won't overwrite the backup if you flash it more than once...
(05/03/2018)
--- TWRP has been updated, it will backup your current Mixers in the same path with file name as "mixername.xml.bak0", if you flash TWRP file twice you'll lose your Original...
(04/03/2018)
--- Thread Early created...
Current Complaints:
--- None...
Current Requests:
--- None...
Currently Doing:
--- Waiting for Device release so users can test the MOD ...
Done:
--- Initial Release...
Confirmed & Conclusions:
--- None...
napolionnardo said:
This module works in S8+ Oreo?
Click to expand...
Click to collapse
No, but I have already made S8+ Oreo SoundMod, link in my signature...
UPDATE:
I forgot to reserve #2 & #3,
So i moved my reply on #3 to #5, reserved #3 & #4...
How to get root then? Can't find any information yet
I think you should actually say what kind of mod this is in the title, currently its just a bunch of buzz words.
peachpuff said:
I think you should actually say what kind of mod this is in the title, currently its just a bunch of buzz words.
Click to expand...
Click to collapse
Oh my God...
I fell on my knees laughing...
You see, I copied the title from my Note 8 thread, while changing it I deleted SoundMod DualSpeaker ???
I'll update it right away...
Oh my God...
UPDATE:
It is done...
It's a DualSpeaker MOD...
current complains: none
current users: none
Dante63 said:
It's a DualSpeaker MOD...
Click to expand...
Click to collapse
Doesn't the s9 already have dual speakers?
The s9 already has stereo speakers, this mod makes no sense
bilboa1 said:
current complains: none
current users: none
Click to expand...
Click to collapse
?
ZpanicZ said:
The s9 already has stereo speakers, this mod makes no sense
Click to expand...
Click to collapse
peachpuff said:
Doesn't the s9 already have dual speakers?
Click to expand...
Click to collapse
You're saying the earpiece is enabled...?
Dante63 said:
You're saying the earpiece is enabled...?
Click to expand...
Click to collapse
Stereo speakers
https://www.samsung.com/us/smartphones/galaxy-s9/performance/
peachpuff said:
Stereo speakers
https://www.samsung.com/us/smartphones/galaxy-s9/performance/
Click to expand...
Click to collapse
Doesn't say earpiece but now I know what DualSpeaker means in the mixers...
Speaker mono left... Speaker mono right...
I was confused why separate them...
Thanks for the link...
Dante63 said:
Doesn't say earpiece but now I know what DualSpeaker means in the mixers...
Speaker mono left... Speaker mono right...
I was confused why separate them...
Thanks for the link...
Click to expand...
Click to collapse
It uses the ear piece for one, and bottom for the other. This is kinda useless, to be honest.
mweinbach said:
It uses the ear piece for one, and bottom for the other. This is kinda useless, to be honest.
Click to expand...
Click to collapse
Only those who owned or seen the demo phone can tell if it's using the earpiece...
I believe there is a speaker at the top and another at the bottom...
if it turns out to be useless, then the MOD will change into something else, but that will be when the device is released...
At least appreciate my efforts, even if it was little instead of criticizing...
Dante63 said:
You're saying the earpiece is enabled...?
Click to expand...
Click to collapse
Yes man, just like in the iPhone 7 and up.
ZpanicZ said:
Yes man, just like in the iPhone 7 and up.
Click to expand...
Click to collapse
I have updated my thread, if the MOD turns out to be useless and my efforts are gone with the wind (unfortunately because I didn't read *sigh*)...
The MOD can be changed into adjusting Volume and other inputs/outputs of the phone... :fingers-crossed:
Dante63 said:
Doesn't say earpiece but now I know what DualSpeaker means in the mixers...
Speaker mono left... Speaker mono right...
I was confused why separate them...
Thanks for the link...
Click to expand...
Click to collapse
It does use the ear piece.
peachpuff said:
It does use the ear piece.
Click to expand...
Click to collapse
The earpiece is a speaker...
I kept reading...
I updated the thread anyway...
It will be used for other modifications...
Volume levels or enabling other inputs & outputs... Etc...
Disclaimer :
Code:
I am not responsible for any damage to your device!
Use this mod at your own risk!
Introduction to The New Dual Speaker Mod For Mi A1!
This mod is for ROMs with 4.9 kernel. Stock ROM will not work, and I will not develop one for stock! This mod enables the earpiece to played simultaneously with the speaker for a stereo effect.
This mod will be updated to get the max out of it. So PLEASE, no ETAs asked!
Compatible Mods :
- Viper4Android
Contributors :
@Jt380p
@mitux
@rexendz
@mparmpas122321
Download :
https://drive.google.com/file/d/1HwjZHX1i8C0VO81SukCmz7sK-oTsbSVh/view? (Flash with Magisk Manager)
Source :
https://www.youtube.com/watch?v=Su9Af-jrJWQ
https://forum.xda-developers.com/android/development/mod-dual-speaker-soundmod-devices-root-t3735280
Audio files provided by @rexendz with PE CAF
Thanks to :
@Dante63 for the tutorial
@topjohnwu for Magisk
@joeyhuab for adding device check
Created : 15/4/2019
Last updated : 4/5/2019
I thought it's not woking, Can you make the earpiece sound louder?
gabwielcastwo said:
I thought it's not woking, Can you make the earpiece sound louder?
Click to expand...
Click to collapse
I just copied the settings from the earpiece. So it's obviously not going to be loud. I have to wait for my phone to be repaired and flash a custom rom again. So I can do more testings. It was confirmed working by a friend of mine, I didn't conduct any testings in person, so I don't know how it sounds.
well, i can confirm it works fine on EvoX rom, sounds good
Thanks friend!
I'll be certainly flashing this ?
berezker said:
well, i can confirm it works fine on EvoX rom, sounds good
Click to expand...
Click to collapse
How was the loudness of earpiece?
gabwielcastwo said:
How was the loudness of earpiece?
Click to expand...
Click to collapse
Too loud because the rom's default earpiece volume is 91. I had to manually decrease it to 85 in mixer_paths
berezker said:
Too loud because the rom's default earpiece volume is 91. I had to manually decrease it to 85 in mixer_paths
Click to expand...
Click to collapse
What line is the volume for earpiece sir?
fhsd22 said:
What line is the volume for earpiece sir?
Click to expand...
Click to collapse
<ctl name="DEC1 Volume" value="XX"/>
In the rom I'm using(Evolution X), the xx value is 91 so it might be different from yours
I think 85 is the sweet spot
---------- Post added at 03:35 AM ---------- Previous post was at 03:33 AM ----------
fhsd22 said:
What line is the volume for earpiece sir?
Click to expand...
Click to collapse
<ctl name="DEC1 Volume" value="XX"/>
In the rom I'm using(Evolution X), the xx value is 91 so it might be different from yours
I think 85 is the sweet spot
dont spread wrong info please
dec1 volume is not related to earpiece volume,its related to mic reciever that how well it recieves audio from different distance
it is no way going to effect output audio
if u really want to increase earpiece volume
edit rx1 digital volume value upto 91(safe limit)
2)installing okk dosent mean its working
first check if the audio really coming from earpiece??
Thanks, works fine on latest Evo, good job :good:
rkview37 said:
dont spread wrong info please
dec1 volume is not related to earpiece volume,its related to mic reciever that how well it recieves audio from different distance
it is no way going to effect output audio
if u really want to increase earpiece volume
edit rx1 digital volume value upto 91(safe limit)
2)installing okk dosent mean its working
first check if the audio really coming from earpiece??
Click to expand...
Click to collapse
How is it wrong information? DEC1 is related to earpiece volume and like i said, this is on Evolution X rom so i don't know if it differs from other roms, even the developer himself that I work with in testing is confirming this. Do some research before accusing people
i m 100% sure about what i said
no more arguement,not going to waste my reply for winning in arguement
rkview37 said:
i m 100% sure about what i said
no more arguement,not going to waste my reply for winning in arguement
Click to expand...
Click to collapse
I think I'm going to have to clean the thread. Lmao
Unfortunately the earpiece volume is too low for the difference to be noticeable.
sainth4tred said:
Unfortunately the earpiece volume is too low for the difference to be noticeable.
Click to expand...
Click to collapse
Like I've said I didn't test it on my phone, so I don't want to blow anyone's earpiece. Now that I've installed PE CAF on mine, I could test it. However, I'm trying to get my module onto magisk-repo (aka the download page), but the moderators are so strict and rude. It'll take a while before I could update it. Thanks for understanding.
WhatzIt2Ya said:
Like I've said I didn't test it on my phone, so I don't want to blow anyone's earpiece. Now that I've installed PE CAF on mine, I could test it. However, I'm trying to get my module onto magisk-repo (aka the download page), but the moderators are so strict and rude. It'll take a while before I could update it. Thanks for understanding.
Click to expand...
Click to collapse
Of course, and thank you for your work. Wasn't trying to be rude or anything, I just reported what I noticed! Keep up the work!
Does this mod provide actual stereo or is it just dual speakers playing mono?
gougous3 said:
Does this mod provide actual stereo or is it just dual speakers playing mono?
Click to expand...
Click to collapse
Just added the earpeice to play simultaneously, but it does sound somewhat stereo.
Doesn't work if AML is enabled.