Develop Bugs

Making a signature

Hi,
Trying to make a signature, i've made it up but when i post it into my sig it's far too small, it's not small on paint, i think it's being resized by xda as it doesn't meet the requirements 500 x 100, so how is it people are having huge signatures? Are they all URL's?
If anyone can help me out that would be great.
thanks.

For starters y you need to crop your image. About 25% of the horizontal space is blank and almost half of the vertical is blank.

Yep, what gallon said. Also upload to tinypic or something.

I posted what i wanted onto phtobucket but when i copy the code it won't allow it, it says invalid file ??

dladz said:
I posted what i wanted onto phtobucket but when i copy the code it won't allow it, it says invalid file ??
Click to expand...
Click to collapse
Can you post the photobucket URL?
Also, bare in mind that photobucket has limited bandwidth. If you host an image there you may well end up with "exceeded your bandwidth" as your signature.

You don't add an attachment you write in in code adding the url to the image box that's bellow fonts selection
[URL*="http://forum.xda-developers.com/announcement.php?a=81"]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL]RL]
That's the banner in my sig with link to rules hosted from picasa.
* there so as you can see code.

If you upload thefile to mediafire or somewhere like and give me the link ill upload it to my image host and send you the link and where to paste it mate or pm me and ill talk you through it
edit: you can post it here as an attachment and i can save it from there mate
Sent from my GT-I9100 using Tapatalk

[TUTORIAL] Center Your Lockscreens [AOKP Example]

Note: Don't let the fact that you're opening up a command prompt or editing .xml files scare you. It's quite simple! In fact, if you follow what I do step-by-step: this will work for AOKP Build 5 without any changes.
Other ROMs will have different layouts. But they will always (that I've seen) be localized in four to six files that reference to a "keyguard."
The edits should be fairly obvious. Look at where the brackets start and end: along with what they're calling.
I encourage you all to post your .zips here since I'm no longer doing this.
Please rename them so users can easily find one for their build and device.
Example (doesn't change text color):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tutorial:
Youtube
Download:
APKTool & CenterLock.zip

Anyone successful yet?
Want to share your .zips with the community?

Jubakuba said:
Anyone successful yet?
Want to share your .zips with the community?
Click to expand...
Click to collapse
Is this also working on landscape lockscreen and could U please post screenshot for portrait and landscape mode.
I'm asking because i've still issues with landscape mode..looks really bad.

I had to mod the framework manually just recently. Didnt follow this tutorial but its good. Also commented on the video gave it thumbs up .

ÜBER™ said:
I had to mod the framework manually just recently. Didnt follow this tutorial but its good. Also commented on the video gave it thumbs up .
Click to expand...
Click to collapse
Thanks man =]

Center lockscreen for AOKP M1 (Maguro)
Build this from Juba's tutorial...all credits accrue to him.
FLASH AT YOUR OWN RISK.

[Guide] Linking images on XDA

Hello, XDA'ers,
There seem to be a lot of people on here that don't know how to make pictures "clickable", so I thought I might as well make a thread to help you guys out!
First, I'd like to notify you all that you are only permitted to have and edit a signature after you make 10 useful posts, so don't worry if your Control Panel doesn't have an "Edit Signature" tab.
To make a Signature Picture clickable:
First, you must upload a picture you would like to be displayed in your signature. Here's a screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then, you can use the [sigpic] tags with URL tags wrapped around them, like this:
Code:
[PLAIN][url=the.url.of.the.page.you.want.to.be.linked][sigpic][/sigpic][/url][/PLAIN]
Now, maybe you're thinking, "Hey, thanks for the tip, but I have more than one signature picture I want to link to a URL - how do I do that?" Well, here's how:
To make any picture clickable:
First, you must upload the image you want to be displayed to an image hosting site. I use imgur, for example.
Then, you must copy the URL of the image you uploaded. For Chrome, this would be [right click the image] > Copy image URL.
After copying the image URL, use this code to insert into any post or signature:
Code:
[PLAIN][url=the.url.of.the.page.you.want.to.be.linked][img]the.url.of.the.image.you.want.to.display[/img][/url][/PLAIN]
Done! You have successfully linked a picture to a website/webpage by making it clickable.
Hopefully this post helps you all out a bit!
Regards,
Nookie
XDA Senior Member

Reserved
Reserved for future use/expansion.

but you can only post it after 10 posts right ?

GaaraSabakuna said:
but you can only post it after 10 posts right ?
Click to expand...
Click to collapse
Yes, that's right.
Thanks for the tip - adding to the OP now.

Can I set height or width of the image?
Something like
HTML:
height="75px"
.

[EDIT #2][CHANGED] New Test Thread

Due to @rei20 thread in this forum, testing the reported bug and creating a new thread.
[SITE BUG] ?Duplicate Threads
To reproduce: 1. Create a new thread 2. Click edit on the content of the thread 3. Change the thread title Result: this will create a duplicate thread instead of amending the original one. (Edit to tryand recreate the ?bug?
forum.xda-developers.com
Changed edited first only the thread title - and no duplicated thread has been created.
In this edit #2, also the content of OP edited - and no duplicated thread has been created. Attached screenshots show the status quo ante:
Spoiler: Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

@rei20 I'm unable to reproduce the buy that you're reported.

I'm on the latest firefox beta for android.
It's possible in between one of those steps I pressed on a link by mistake and used the back button to return to the edit screen.

rei20 said:
I'm on the latest firefox beta for android.
It's possible in between one of those steps I pressed on a link by mistake and used the back button to return to the edit screen.
Click to expand...
Click to collapse
I'm using FF v91.0.2 with a lot of privacy related add-ons. It might certainly be that there was just whatever wrong user input. I think it doesn't matter; this happens to all of us. We're just humans, aren't we. You were the very first who reported this "bug".
Please advise if you want me to close your thread, and afterwards I also close this one - but not sooner than tomorrow as my usual logoff/bedtime is approaching or tonight more precisely football worldchampionship qualifiers and my team is going to play.
Have a good night! Regards
Oswald Boelcke

Themes / Apps / Mods S22 splash screen with no warning.

Removed the warnings, Knox and Android But added Magisk.
extra_stuff.zip has the extra stuff
no_warning.zip is just no warning
Spoiler: How to install and make your own.
Download your firmware file except SM-S901N. Open the BL file and you will see up_param.bin.lz4, open that to get up_param.bin. Then you can remove the jpgs from the .bin file, edit them and reinsert them but keep the name and image size the same. After that you can flash it in Odin AP.
Spoiler: Help me make an SM-S901N version.
SM-S901N does not have a up_param so this won't work with it. if anyone has the SM-S901N splash screen files. Send me it and I will make a version for that model.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You can also try sharing the instructions by which you achieved this so others can do the edits on their own.

{Mod edit: Quoted post has been deleted. Oswald Boelcke}
Could you go more in detail as to what the problem is?

Is you file compatible with SM-S901B?

Muarco said:
Is you file compatible with SM-S901B?
Click to expand...
Click to collapse
It should be but there is a way to check. Open the BL firmware file and see if there is up_param.bin.lz4 if there is that means its compatible

Awesome post! Thanks for sharing excellent information.Really helpful for me . https://papayafruits.info/

mr.herbert said:
It should be but there is a way to check. Open the BL firmware file and see if there is up_param.bin.lz4 if there is that means its compatible
Click to expand...
Click to collapse
How do you flash the file?