Develop Bugs

[S-OFF][Flash recovery] Easy to flash recovery on computer

First of all , plz forgive my bad English ,I've tried my best~!
Thanks for emveefr and his quote :http://forum.xda-developers.com/showthread.php?t=1301388
If you can understand Chinese ,here is my post firstly on a Chinese forum ：http://bbs.hiapk.com/thread-2629638-1-1.html
This quote will let you flash your recovery easily through a computer,what you need to do is just a few steps below:
Above all ,make sure your wildfire s is S-OFF.
1. Download HTC Sync USB drivers through internet ,you can find it in the website of HTC.
2. Download "flash_recovery.zip" in the end of this quote, and extract it to you desktop (anywhere is OK),
3. make sure you user data space have more than 10 Mb available (to make sure,you may need uninstall some applications in you phone).
4. connect you phone to the computer with USB data cable,and chose HTC Sync mode.
In the end ,you just need to click "RunMe" in the folder that you extracted, then wait some times ,the application will work itself ,when you see "press any key to continue" ,all be done~!
After these steps, your phone will reboot into recovery mode ,which is showing the vision 5.0.2.6 and with a blue menu.
By the way, you can use your own recovery.img to instead of the recovery.img in the folder,but you must name it as "recovery.img" .
You should have succeed !

No replies ,,,,,

Or you could download clockworkmod, put on sd card and it installs itself.

Yeah just downloading and placing the clockwork recovery zip on the root of the SD card is a much faster process.
sent using tapatalk

Yeah,it a normal way to flash recovery,but in China, someone locked hboot to forbidden others flash it ,and planted some applications in the phone that not welcome by users. So, I found this method to solve this problem .

I see, so this is a good bit of knowledge to have in case someone does the same later.
sent using tapatalk

ren cai a ! haha....jushuo zhege banfa zhende neng gaoding cid 11111111
---------- Post added at 05:37 AM ---------- Previous post was at 05:22 AM ----------
mofei LZ shi 风行

zhuru123 said:
ren cai a ! haha....jushuo zhege banfa zhende neng gaoding cid 11111111
---------- Post added at 05:37 AM ---------- Previous post was at 05:22 AM ----------
mofei LZ shi 风行
Click to expand...
Click to collapse
Any CID is available. You should read the quote on bbs.hiapk.com

neng shuo putong hua bu ? ni shuo de sha yisi ?
---------- Post added at 08:06 AM ---------- Previous post was at 07:53 AM ----------
哎。。。据说现在有son的病毒机了。。楼主又要加油了。、。。。

zhuru123 said:
neng shuo putong hua bu ? ni shuo de sha yisi ?
---------- Post added at 08:06 AM ---------- Previous post was at 07:53 AM ----------
哎。。。据说现在有son的病毒机了。。楼主又要加油了。、。。。
Click to expand...
Click to collapse
Chines is not allowed here .... I know someone locked hboot on s-on devices ,if you want to know more information that be wrote by Chinese about this, bbs.hiapk.com may fit you more ......

ruguo ni zai WUHAN wo keyi gao dao zhezhong shouji ,keyi jie ni yanjiu....ENGLISH wo zhi neng yuedu ,bu neng biaoda chulai ...ni you QQ mei ...wo dandu gei ni shuo ~~

Stock ROMs, post'em if ya got'em!

Hi Everyone,
Now that the P930 rooting/CWM/Recovery scene is officially in swing, I thought I would reach out to you all and ask that if anyone had a spare few minutes, could you please post stock partition images from your MMCBLK0P1, MMCBLK0P8, MMCBLK0P13, MMCBLK0P14 and MMCBLK0P27 please to help out. A complete set of these are needed for each model/carrier too to be called a ROM. We are primarily trying to get the .KDZ files which are the best way to restore your unit.
In case you forget or need a refresher, here are the partitions and their associated image names for MOST models of the P930 (SU640 and Nitro HD confirmed have the same filesystem):
mmcblk0p1 -> firmware.img
mmcblk0p8 -> boot.img
mmcblk0p13 -> recovery.img
mmcblk0p14 -> baseband.img
mmcblk0p27 -> system.img
Currently, we have a Nitro HD ROM available but we are still looking for:
Bell Optimus 4G LTE
NTT DoCoMo
SKTel
We now have the following ROM images:
LG U+ LU6200: Download it from HERE <thx richard.w!!>
So please contribute, it would be most appreciated by all.
Thank you all in advance, and thank you to all currently helping out.

dont we also have to have the mmcblk0p1 and mmcblk0p14?

Good point my friend, thanks for pointing that out!

I think I should hesitantly point out that those partitions might not be the same on all variants. They happened to be on the Nitro and SU640, though. Also, it'd be easier for people to flash the full .kdz if it's available for their phone.
Sent from my LG-P930 using xda premium

Yup, you are also right, but since the KDZ is not available for the Optimus 4G LTE from bell right now, this thread would serve it's purpose to build one, or for others as well to keep the .kdz's fresh and up to date in case of recovery. Wanted to have a central thread with the images listed for quick access as well.
God, i love input from everyone! makes me realize i have alot to learn still in my old age.

i will upload theone for lg u+...
Sent from my LG-LU6200 using XDA Premium App

Optimus LTE no system.img
Optimus LTE (Bell Canada)
Download link
baseband.img (32 MB) http://www.multiupload.com/1PRR7RMLCD
boot.img (10 MB) http://www.multiupload.com/D9LPIGDFEU
firmware.img (32 MB) http://www.multiupload.com/ZLDW3KXWPY
recovery.img (16 MB) http://www.multiupload.com/XYFUJAT0EW
system.img (512 MB) http://www.multiupload.com/MAEU3THA66
d13ceba232d46cb0834992acf7b59191 baseband.img
01096d087b841ce1179481260b411491 boot.img
3db96b28c71f91d0b8af49d459dc54e7 firmware.img
fd9110c54c139794882e932c44616745 recovery.img
0ad6159a85f1293944da2d7ba73edeb1 system.img

WARNING - OFF TOPIC!
Can I request upload to http://multiupload.com instead of megaupload? from that site we can use download managers and no wait without any premium accounts...

ALERT! ALERT!!! [email protected] HAS POSTED OFF TOPIC!!! ALERT!! ALERT!!
now back to our regularly scheduled [email protected] currently in progress........

lu6200 kdz file
stock rootable rom kdz file for lu6200
http://sui.filebox.ro/get_file.php?...1326138632&h=85ce1fcbc34eb7c64ebef39897769740

Any P930 images yet?

is multiupload down? i haven't been able to download from them for last 3 days.
can someone please reup somewhere it works?
thanks

http://db.tt/ntwJEuch

[email protected] said:
http://db.tt/ntwJEuch
Click to expand...
Click to collapse
Hey [email protected] thanks for uploading these files. I'm attempting to return my phone to stock so I can take it back to AT&T. I'm currently on kernelpanics rom. Could you or anyone else who knows how, please help me out and let me know which files to download and how to get back to stock? I'd really appreciate it.

[email protected] said:
http://db.tt/ntwJEuch
Click to expand...
Click to collapse
Hi Vano
Thanks for posting the DB link.
I tried those /.img files, I flashed boot and system via ADB and found out they are actually ATT instead of Bell.

[email protected] said:
http://db.tt/ntwJEuch
Click to expand...
Click to collapse
Hey [email protected], is the .kdz file in the DB link for AT&T nitro hd? If yes, how to flash it?

Need E973 (telus) ICS KDZ file !!

Can someone link or upload a Telus E973 KDZ file please. (10e if i am not mistaken?)
It would be very appreciated !

found one !
I found one on a chineese site ...
Do you guys think its thrustable?
chineese site : http://kuai.xunlei.com/d/H-qOAAKWHABaEfZQ36d

F180k ics kdz
loucmachine said:
I found one on a chineese site ...
Do you guys think its thrustable?
chineese site : http://kuai.xunlei.com/d/H-qOAAKWHABaEfZQ36d
Click to expand...
Click to collapse
Do you also see any ICS kdz for F180K?? Thanks

no
I should have posted this in first place, its the place i found the link i put in the first place
http://bbs.gfan.com/forum.php?mod=viewthread&action=printable&tid=5665879
But there is only JB for F180K

I found another source. I found a post :
Have any of you tried using the following method?
htt p://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=IMEIHERE"
Replace IMEIHERE with the imei of your phone.
It will spit some url with the latest KDZ file. For example in my case, it's the H version. "htt p://csmgdl.lgmobile.com/swdata/WDLSW/LGE973/ABLMBK/E97320H_00/E97320H_00.kdz"
and I needed the F version. Playing with the url, I got it at "htt p://csmgdl.lgmobile.com/swdata/WDLSW/LGE973/ABLMBK/E97310F_00/E97310F_00.kdz"
---------- Post added at 05:11 PM ---------- Previous post was at 05:05 PM ----------
I just saw the one for your phone from the website posted above by Elisha. The url is "htt p://csmgdl.lgmobile.com/swdata/WDLSW/LGE973/ATLSBK/E97310G_00/E97310G_00.kdz" -> by replacing the G to E I was able to get a file: "ht tp://csmgdl.lgmobile.com/swdata/WDLSW/LGE973/ATLSBK/E97310E_00/E97310E_00.kdz"
notice the TLS (Telus?) replacing the BLM (Im from bell mobility?) compared to my url posted before.
The link he posted works for Telus
Maybe you can try something similar playing with urls ? :/

loucmachine said:
I found another source. I found a post :
Have any of you tried using the following method?
htt p://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=IMEIHERE"
Replace IMEIHERE with the imei of your phone.
It will spit some url with the latest KDZ file. For example in my case, it's the H version. "htt p://csmgdl.lgmobile.com/swdata/WDLSW/LGE973/ABLMBK/E97320H_00/E97320H_00.kdz"
and I needed the F version. Playing with the url, I got it at "htt p://csmgdl.lgmobile.com/swdata/WDLSW/LGE973/ABLMBK/E97310F_00/E97310F_00.kdz"
---------- Post added at 05:11 PM ---------- Previous post was at 05:05 PM ----------
I just saw the one for your phone from the website posted above by Elisha. The url is "htt p://csmgdl.lgmobile.com/swdata/WDLSW/LGE973/ATLSBK/E97310G_00/E97310G_00.kdz" -> by replacing the G to E I was able to get a file: "ht tp://csmgdl.lgmobile.com/swdata/WDLSW/LGE973/ATLSBK/E97310E_00/E97310E_00.kdz"
notice the TLS (Telus?) replacing the BLM (Im from bell mobility?) compared to my url posted before.
The link he posted works for Telus
Maybe you can try something similar playing with urls ? :/
Click to expand...
Click to collapse
Yeah tried that but LG probably deleted already all the ICS kdz. Luckily, I found a download link for korean firmwares. Thanks anyway bro!

X800 doesn´t start after flashing twrp and SuperSU

Hey guys i have a problem,
today i installed twrp on my x800. It worked without problems, then i installed SuperSU with twrp and now the phone does nothing. i tried every combination of holding the buttons but nothing happens. I cant get into the bootloader or anything. When i plug the phone in my pc it gets shown as unknown USB device. What can i do to get my phone back?

Marvinmaster said:
Hey guys i have a problem,
today i installed twrp on my x800. It worked without problems, then i installed SuperSU with twrp and now the phone does nothing. i tried every combination of holding the buttons but nothing happens. I cant get into the bootloader or anything. When i plug the phone in my pc it gets shown as unknown USB device. What can i do to get my phone back?
Click to expand...
Click to collapse
Hi,
maybe this process will revieve you X800:
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/ or
https://boycracked.com/2016/01/22/h...r-all-android-device-based-on-qualcomm-chips/

Ok thanks it seems that my phone is hardbricked. I wanted to flash it wit Qfil but i dont know where to get the right files the normal rom doesnt has the files i need.

Marvinmaster said:
Ok thanks it seems that my phone is hardbricked. I wanted to flash it wit Qfil but i dont know where to get the right files the normal rom doesnt has the files i need.
Click to expand...
Click to collapse
Hi,
not tested but I downloaded those files for unbricking from various places:
https://onedrive.live.com/redir?res...9904&authkey=!AA21BJTjQZOwDb8&ithint=file,zip

thanks for your answer. I made this but i got this error:
!!!!!!!! WARNING: Flash programmer failed to load trying to continue !!!!!!!!!
Programming EMMC device using SECTOR_SIZE=512
<?xml version = "1.0" ?><data><configure MemoryName="emmc" ZLPAwareHost="1" SkipStorageInit="0" SkipWrite="0" MaxPayloadSizeToTargetInBytes="16384"/></data>

ERROR: No response to configure packet
Status: 21 (null)

Marvinmaster said:
thanks for your answer. I made this but i got this error:
!!!!!!!! WARNING: Flash programmer failed to load trying to continue !!!!!!!!!
Programming EMMC device using SECTOR_SIZE=512
<?xml version = "1.0" ?><data><configure MemoryName="emmc" ZLPAwareHost="1" SkipStorageInit="0" SkipWrite="0" MaxPayloadSizeToTargetInBytes="16384"/></data>
ERROR: No response to configure packet
Status: 21 (null)
Click to expand...
Click to collapse
Hi,
maybe you can try to use this QPST 2.7.422 (QFIL) software version:
https://onedrive.live.com/redir?res...1875&authkey=!ALtL24jxYBSXh0M&ithint=file,zip
and follow this instructions: https://boycracked.com/2016/01/22/h...r-all-android-device-based-on-qualcomm-chips/
QPST Screenshot...
https://onedrive.live.com/redir?res...authkey=!ACn7TnC4AC7FaAI&v=3&ithint=photo,png
I hope you will be able to fix your phone....

BetaHydri said:
Hi,
maybe you can try to use this QPST 2.7.422 (QFIL) software version:
https://onedrive.live.com/redir?res...1875&authkey=!ALtL24jxYBSXh0M&ithint=file,zip
and follow this instructions: https://boycracked.com/2016/01/22/h...r-all-android-device-based-on-qualcomm-chips/
QPST Screenshot...
https://onedrive.live.com/redir?res...authkey=!ACn7TnC4AC7FaAI&v=3&ithint=photo,png
I hope you will be able to fix your phone....
Click to expand...
Click to collapse
Shouldn't you use the prog_emmc_firehose_8994_lite.mbn file? And please note you have to reset the device (press power for like 30 seconds) every time you attempt a QFIL flash, COM port shuts down itself after every flash attempt.
http://forum.le.com/us/index.php?threads/please-provide-technical-stuff-about-how-to-bring-back-to-life-a-hard-bricked-dead-x800-pro.264/

I made it like you said but then i got this error after a long time nothing happend:
Sending NOP
NOP: Fail Code: 10
Unable to send FireHose NOP, Device is not in Firehose mode !
Download Fail:System.Exception: Failed to send Firehose NOP to the phone.
bei QC.QMSLPhone.Phone.QPHONEMS_FireHoseNOP()
bei QC.SwDownloadDLL.SwDownload.FireHoseDownloadImage(Boolean bResetPhone, List`1 rawprogramFilesList, List`1 patchFilesList, Single& fImageSizeInMB, Single& fThroughput)
Download Fail:FireHose Fail FireHose Fail
Finish Download

Same error happens on mine too... I guess the QFIL zip file is wrong, probably a different revision. When and where did you buy yours?
Inviato dal mio HTC One utilizzando Tapatalk

teorouge said:
Same error happens on mine too... I guess the QFIL zip file is wrong, probably a different revision. When and where did you buy yours?
Inviato dal mio HTC One utilizzando Tapatalk
Click to expand...
Click to collapse
There seems to be variants of the LETV 1Pro out there.
http://www.androidiani.com/forum/mo...rsione-usa-ovvero-le1pro_us-marchiato-ce.html
The Qfil that I downloaded in the web and posted here seems to be from the chinese version. So maybe this is the problem !
The FCC Infos are also quite interessting, as they confirm that the phone can handle various frequencies...
https://fccid.io/2AFWMLE1PRO
---------- Post added at 07:18 PM ---------- Previous post was at 07:02 PM ----------
BetaHydri said:
Hi,
maybe you can try to use this QPST 2.7.422 (QFIL) software version:
https://onedrive.live.com/redir?res...1875&authkey=!ALtL24jxYBSXh0M&ithint=file,zip
and follow this instructions: https://boycracked.com/2016/01/22/h...r-all-android-device-based-on-qualcomm-chips/
QPST Screenshot...
https://onedrive.live.com/redir?res...authkey=!ACn7TnC4AC7FaAI&v=3&ithint=photo,png
I hope you will be able to fix your phone....
Click to expand...
Click to collapse
This seems to be the same error for another user with brickt LeTV LE1 Pro
http://www.letv.re/topic/177-bricked-phone-x800/

That would be me, I've posted in many places in the last days asking for help! XD

teorouge said:
That would be me, I've posted in many places in the last days asking for help! XD
Click to expand...
Click to collapse
Then hopefully someone will provide you/us with a compatible QFil for the US/CE version.
Or someone finds out which sources/files have to be changed/replaced inside the QFil chinese package ?
For example when you decompress an original ROM (in this case a chinese one) you find some of the files that are also located inside the QFil package. Question if this is sufficient for the whole Qfil flashing process. So I meen replacing the files from an original US ROM with those inside the chinese QFil sources ???
X:\X1_X800-CN-FN-BEXCNFN5501304131S-5.5.013S\firmware-update
------ 09.04.2015 12:11 443904 BTFM.bin
------ 09.04.2015 12:11 518820 emmc_appsboot.mbn
------ 09.04.2015 12:11 66560 hyp.mbn
------ 09.04.2015 12:11 76158464 NON-HLOS.bin
------ 09.04.2015 12:11 39080 pmic.mbn
------ 09.04.2015 12:11 195468 rpm.mbn
------ 09.04.2015 12:11 624976 sbl1.mbn
------ 09.04.2015 12:11 527744 tz.mbn
X:\X1_X800-CN-FN-BEXCNFN5501304131S-5.5.013S
------ 09.04.2015 12:11 27492646 boot.img
------ 09.04.2015 12:11 268435456 bootvideo.img
------ 09.04.2015 12:11 36909 file_contexts
------ 09.04.2015 12:11 169 ota_info.txt
------ 09.04.2015 12:11 62914560 splash.img
------ 09.04.2015 12:11 1968156672 system.new.dat
------ 09.04.2015 12:11 0 system.patch.dat
------ 09.04.2015 12:11 574 system.transfer.list

Yeah, I saw that too but I fear we have wrong rawprogram, patch or prog_emmc_firehose_8994 files... And those should be device and revision specific, so we must hope someone actually gives them away (LeTV USA tech support maybe? I begin to fear they don't even have one and fix phones only by exchanging motherboards...).
Inviato dal mio HTC One utilizzando Tapatalk

teorouge said:
Yeah, I saw that too but I fear we have wrong rawprogram, patch or prog_emmc_firehose_8994 files... And those should be device and revision specific, so we must hope someone actually gives them away (LeTV USA tech support maybe? I begin to fear they don't even have one and fix phones only by exchanging motherboards...).
Inviato dal mio HTC One utilizzando Tapatalk
Click to expand...
Click to collapse
Yes, you're probably right with this assumption. I bought last week another one at
Efox: http://www.efox-shop.com/letv-le1-p...-55-zoll-2k-bildschirm-android-50-4g-g-305444
I should get it the next days and regarding the picture it's also a CE Version.

Let's hope someone will shed some light in the meantime..
BTW this is an interesting reading: http://forum.xda-developers.com/win...te-rawprogram0-xml-ffu-file-extract-t3385201/

teorouge said:
Let's hope someone will shed some light in the meantime..
BTW this is an interesting reading: http://forum.xda-developers.com/win...te-rawprogram0-xml-ffu-file-extract-t3385201/
Click to expand...
Click to collapse
Yes I noticed also that the described tool emmcdl.exe is also available inside the chinese QFIL LETV resources.
---------- Post added at 11:42 PM ---------- Previous post was at 11:25 PM ----------
BetaHydri said:
Yes I noticed also that the described tool emmcdl.exe is also available inside the chinese QFIL LETV resources.
Click to expand...
Click to collapse
The emmcdl.exe tool is similar to the thor2.exe to flash Windows 8/10 Mobile SmartPhones with Snapdragon SOCs.
thor2.exe comes with the Windows Device Recovery Software.
Btw: THe emmcdl.exe in the chinese Qfil sources is Version 2.2. So i think newer than the one you can download for the DragonBaord Tool.

im in trouble i have tried many things and i cant make my computer recognizes de device as a qualcom, almost all the time is unknown device or if i fastboot its a android bootloader but never qualcomm 9008 can somebody help me, cuz im stuck with the penguin logo or either the screen completely off.

......

BetaHydri said:
There seems to be variants of the LETV 1Pro out there.
http://www.androidiani.com/forum/mo...rsione-usa-ovvero-le1pro_us-marchiato-ce.html
The Qfil that I downloaded in the web and posted here seems to be from the chinese version. So maybe this is the problem !
The FCC Infos are also quite interessting, as they confirm that the phone can handle various frequencies...
https://fccid.io/2AFWMLE1PRO
---------- Post added at 07:18 PM ---------- Previous post was at 07:02 PM ----------
This seems to be the same error for another user with brickt LeTV LE1 Pro
http://www.letv.re/topic/177-bricked-phone-x800/
Click to expand...
Click to collapse
Hi do you have a link for CN Version the files i need to flash?

Lg g4 - lastest version of lgup/dll file

FIX REFUBRISH/DOWNGRADE ETC STUCK AT 16% DOWNLOAD MODE UNABLE TO GET BACK TO STOCK
error 0x2000 invalid command response Has Been FixeD WITH THE LASTEST DLL FILE
FILE INCLUDE (DLL+PATCH_DLL+SETUP LGUP+DRIVER) package
Please Read The *READ ME FILE FOR THE RIGHT INSTALLATION WITHOUT GETTING ANY PROBLEM :
Link Easy To Download No Ads Bulllsh*t.................. :
https://drive.google.com/file/d/0B_yWw6RLoA-gdTMtZFczMUhQOHM/view?usp=sharing
Video To Patch *.dll file
https://www.youtube.com/watch?v=w4RSEholcuM

The video is deleted. Where can i Finf it

Abandoned War Place said:
FIX REFUBRISH/DOWNGRADE ETC STUCK AT 16% DOWNLOAD MODE UNABLE TO GET BACK TO STOCK
error 0x2000 invalid command response Has Been FixeD WITH THE LASTEST DLL FILE
FILE INCLUDE (DLL+PATCH_DLL+SETUP LGUP+DRIVER) package
Please Read The *READ ME FILE FOR THE RIGHT INSTALLATION WITHOUT GETTING ANY PROBLEM :
Link Easy To Download No Ads Bulllsh*t.................. :
https://drive.google.com/file/d/0B_yWw6RLoA-gdTMtZFczMUhQOHM/view?usp=sharing
Video To Patch *.dll file
https://www.youtube.com/watch?v=w4RSEholcuM
Click to expand...
Click to collapse
You Sir are the Hero of the night!
Thank you!!!!!

How do you patch the dll? Video not working

inso420 said:
How do you patch the dll? Video not working
Click to expand...
Click to collapse
Navigate to LGUP install directory (default C:\Program Files (x86)\LG Electronics\LGUP) and simply replace the 8994.dll in model\8994 directory.

Here is the version 0.4.3 from the F500 variant of the device.
It was the only one that worked for me on the v29 firmware.
LGUP_8994.dll

i still got this error error 0x2000 invalid

shahid001 said:
i still got this error error 0x2000 invalid
Click to expand...
Click to collapse
cause you need flash the v20p KDZ first, then you can flash any other KDZ.

the_naxhoo said:
cause you need flash the v20p KDZ first, then you can flash any other KDZ.
Click to expand...
Click to collapse
can you give me link pleasse

shahid001 said:
can you give me link pleasse
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=73642302&postcount=4

I had wasted so much time and tried so many solutions before coming across your post!
This works perfectly.
Thank you so much !

the_naxhoo said:
https://forum.xda-developers.com/showpost.php?p=73642302&postcount=4
Click to expand...
Click to collapse
i have lg g4 f500l 30b will it work for it i want to downgrade to android 6 ?

thank you the naxhoo
the_naxhoo said:
https://forum.xda-developers.com/showpost.php?p=73642302&postcount=4
Click to expand...
Click to collapse
Thank you it worked for my G4 H815!! It was bricked since my upgrade to nougat and it was impossible to go back to stock ROM Marshmallow.. (error 0x2000 with LGUP) Do you know why it works with this kdz and not with others? It's the only M version allowed for downgrade?
You saved my week :good:

ur d best man. worked like a charm mate. Tnx

Acc request
Plz acc my request for the file because i really really need the file

need the file please accept request moular*** @gmail.com
---------- Post added at 11:48 AM ---------- Previous post was at 11:35 AM ----------
tulen_kobi said:
here is the version 0.4.3 from the f500 variant of the device.
It was the only one that worked for me on the v29 firmware.
lgup_8994.dll
Click to expand...
Click to collapse
thank you!!!! Fixed 0x2000 error on my nugot vs986 downgrading to mm !!!

thank you very much it works with VS986 2BA to 13B
tulen_kobi said:
Here is the version 0.4.3 from the F500 variant of the device.
It was the only one that worked for me on the v29 firmware.
LGUP_8994.dll"LGUP_8994.dll
Click to expand...
Click to collapse
Thank you very much it works with VS986 2BA to 13B.
LGUP always stops at 16% then gives me a "0x2000 error.invalid command response"
After replacing the DLL file that you provided. It works.

May it will work for H818p Nougat,,, because I'm searching it for many times
My Nougat H818p is in hanging condition when downgrading to MM , LL or flashing Nougat again at
PrimaryGPT 11% i think,,, so please experts solve my issues urgently

Thank you so much !!!
After a passage with the rom "H-ROM V30 PORT V2.2", I bricked my H815 under LG UP ... You save my phone !!!
Thank you so so much !!!

Abandoned War Place said:
FIX REFUBRISH/DOWNGRADE ETC STUCK AT 16% DOWNLOAD MODE UNABLE TO GET BACK TO STOCK
error 0x2000 invalid command response Has Been FixeD WITH THE LASTEST DLL FILE
FILE INCLUDE (DLL+PATCH_DLL+SETUP LGUP+DRIVER) package
Please Read The *READ ME FILE FOR THE RIGHT INSTALLATION WITHOUT GETTING ANY PROBLEM :
Link Easy To Download No Ads Bulllsh*t.................. :
https://drive.google.com/file/d/0B_yWw6RLoA-gdTMtZFczMUhQOHM/view?usp=sharing
Video To Patch *.dll file
Click to expand...
Click to collapse
All the link given is very death