Develop Bugs

Motorola Pro + (Plus) original that no longer boot ...

Hello to all.
I have a Motorola Pro + (Plus) ITALY WARRANTY purchased on 25/09/2012.
The phone began to crash and was able to restart removing and replacing the battery.
Now starts but hangs at the Motorola logo.
I tried to start it and hold in the physical keyboard R + M + the power button but it remains on the Motorola logo.
I tried to start it by pressing and holding Volume Down button + Power button and exit the menu Erase USERDATA - Fastboot - Enter Qualcomm Flash Mode - Power Off - Exit (boot Android).
I did Erase USERDATA and then I tried to restarted, nothing, always hangs at the Motorola logo.
I did fastboot and out of the word "Mode" (I can do?).
I did Enter Qualcomm Flash Mode and then I tried to restarted, nothing, always hangs at the Motorola logo.
I did Exit (boot Android) and does nothing, not even go out exit the menu.
What can I do, any ideas?
Thank you all!
Ciao...

undertherain said:
Hello to all.
I have a Motorola Pro + (Plus) ITALY WARRANTY purchased on 25/09/2012.
The phone began to crash and was able to restart removing and replacing the battery.
Now starts but hangs at the Motorola logo.
I tried to start it and hold in the physical keyboard R + M + the power button but it remains on the Motorola logo.
I tried to start it by pressing and holding Volume Down button + Power button and exit the menu Erase USERDATA - Fastboot - Enter Qualcomm Flash Mode - Power Off - Exit (boot Android).
I did Erase USERDATA and then I tried to restarted, nothing, always hangs at the Motorola logo.
I did fastboot and out of the word "Mode" (I can do?).
I did Enter Qualcomm Flash Mode and then I tried to restarted, nothing, always hangs at the Motorola logo.
I did Exit (boot Android) and does nothing, not even go out exit the menu.
What can I do, any ideas?
Thank you all!
Ciao...
Click to expand...
Click to collapse
You must look for the sbf file firmware of you phone and get into this http://pc.cd/yXz for getting RSD lite for flashing it and you will unbrick your phone :fingers-crossed:

migui0401 said:
You must look for the sbf file firmware of you phone and get into this http://pc.cd/yXz for getting RSD lite for flashing it and you will unbrick your phone :fingers-crossed:
Click to expand...
Click to collapse
Ok.
Where I look for the sbf file firmware of my phone?
There is a LINK?
Thanks.
Ciao...

undertherain said:
Ok.
Where I look for the sbf file firmware of my phone?
There is a LINK?
Thanks.
Ciao...
Click to expand...
Click to collapse
Here's your sbf file firmware http://fwteam.grupoandroid.com/PRO+%20MB632/5.5.1Q-110_ELW-TA-29-57-release-keys-signed.Retail-en-IT.tar.gz
Click THANKS button if i helped you :good:

Hi.
I flashed, but it does not reboot, it always stops at the motorola logo.
Any other ideas?
Thanks!
Ciao...

undertherain said:
Hi.
I flashed, but it does not reboot, it always stops at the motorola logo.
Any other ideas?
Thanks!
Ciao...
Click to expand...
Click to collapse
How time did you wait?

migui0401 said:
How time did you wait?
Click to expand...
Click to collapse
A few minutes.
However, after the motorola logo turns off and if I press the power button all the buttons light up but does not turn on, exactly as it did before the flash.

undertherain said:
A few minutes.
However, after the motorola logo turns off and if I press the power button all the buttons light up but does not turn on, exactly as it did before the flash.
Click to expand...
Click to collapse
Flash it with the lastest version of RSD lite with 6.1.6

migui0401 said:
Flash it with the lastest version of RSD lite with 6.1.6
Click to expand...
Click to collapse
I used RSD Lite v6.1.6 Multi-Flash / Multi-Flex Tool and I have flashed 5.5.1Q-110_ELW-TA-29-57-release-keys-signed.Retail-en-IT.tar.gz.
Nothing.

undertherain said:
I used RSD Lite v6.1.6 Multi-Flash / Multi-Flex Tool and I have flashed 5.5.1Q-110_ELW-TA-29-57-release-keys-signed.Retail-en-IT.tar.gz.
Nothing.
Click to expand...
Click to collapse
Try again, but now with a older version of RSD lite.

Mi max with bootloader unlock but i can not activate the oem unlock.

I have a mi max 3, bootloader unlock and with the global version 9.6.4.0 . I am trying to install the eu version 8.8.9, but when i am installing the nitrogen recovery the phone turn the screen black and said press some button to shut down, so i cannot do anything. I would like to ask if the problem is that i cannot turn on the oem option or if there is other problem.
Thanks.

yuoi said:
I have a mi max 3, bootloader unlock and with the global version 9.6.4.0 . I am trying to install the eu version 8.8.9, but when i am installing the nitrogen recovery the phone turn the screen black and said press some button to shut down, so i cannot do anything. I would like to ask if the problem is that i cannot turn on the oem option or if there is other problem.
Thanks.
Click to expand...
Click to collapse
You need to use fastboot and flash twrp recovery. Follow my guide.

I tried to do
opasha said:
You need to use fastboot and flash twrp recovery. Follow my guide.
Click to expand...
Click to collapse
i tried to do the guide but when i press refresh in the miflash tool the phone turn black and say press any button to shut down.

stuck on EDL mode after trying to rollback from pie (beta) to oreo

Hello dear community,
I did try to flash rollback my A2 lite, from pie (beta) to stock 9.6.4.0 rom (Android one). After flashing my telephone wouldn't boot normally, next step I put the telephone on EDL mode and tried again flashing with mi flash utility, the process run successful but when it finished flashing, the phone did not reboot, with black screen. I've been trying different roms(stock official) with no success,I can't get the phone to exit EDL mode, BTW I can't reboot in fastboot mode neither boot to rom normally to run adb commands.
P.S. I did the vpn Indonesia to get ota pie beta
Any suggestions would be appreciated..
Thanks in advanced

Hmmm... But you know, that after flashing successfully in edl, the phone doesn´t reboot automatically. So did you try to hold pwr for more than 10 sec?
And do you hear some vibration sound or any other response?

Voodoojonny said:
Hmmm... But you know, that after flashing successfully in edl, the phone doesn´t reboot automatically. So did you try to hold pwr for more than 10 sec?
And do you hear some vibration sound or any other response?
Click to expand...
Click to collapse
Thanks Voodoojonny,
Affirmative, I tried trying to turn on the phone and nothing happened ,also no sound or vibration.

lumpen_er1 said:
Thanks Voodoojonny,
Affirmative, I tried trying to turn on the phone and nothing happened ,also no sound or vibration.
Click to expand...
Click to collapse
Connect your phone to your pc and look int your device manager. Perhaps its still shown as com device. If so, disconnect it and hold pwr for a long long time...

lumpen_er1 said:
Hello dear community,
I did try to flash rollback my A2 lite, from pie (beta) to stock 9.6.4.0 rom (Android one). After flashing my telephone wouldn't boot normally, next step I put the telephone on EDL mode and tried again flashing with mi flash utility, the process run successful but when it finished flashing, the phone did not reboot, with black screen. I've been trying different roms(stock official) with no success,I can't get the phone to exit EDL mode, BTW I can't reboot in fastboot mode neither boot to rom normally to run adb commands.
P.S. I did the vpn Indonesia to get ota pie beta
Any suggestions would be appreciated..
Thanks in advanced
Click to expand...
Click to collapse
press on, volume up and down

Bootloop when update to MIUI Global 10.4.1 eu

any fix for this? I was on 10.3 xiaomi.eu global stable and bootloop after updating to 10.4 xiaomi.eu, any hints will be appreciated

Are you able to enter recovery?

Same problem here...it stucked when I used a dark theme...bootloop with 3 choices 1)reboot, 2) wipe datra and 3) connect with mi assistant. First choice always goes to the 3 options, second choice never selected because of the consequences andd third choice I connect the phone but mi pc suite doesn't connect with it, only the Pc connects. Any help out there?

RamonXick said:
any fix for this? I was on 10.3 xiaomi.eu global stable and bootloop after updating to 10.4 xiaomi.eu, any hints will be appreciated
Click to expand...
Click to collapse
I had the same problem and i fixed this way:
1) extract the ROM fastboot you had before, downloaded from en.miui;
2) connect your device to PC in fastboot mode;
3) go to the extracted ROM and select only batch files;
4) double click on flash_all.bat, if you want to wipe all your device leaving bootloader unlocked, or flash_all_except_data.bat if you want wipe all exept data with boot loader unlocked, or flash_all_lock.bat if you want to wipe all with bootloader locked.

I tried everything...I wiped all data...but the problem that was putting my hpone always in recovery mode 3.0 was that the volume up button is always pressed....so power and volume up, always recovery mode 3.0
So after installing with mi assistant 3.0 chinese version(most of the times I didn't know what I pressed) I installed global stable 10.4.2.0 and after making the phone the rebooting I was pressing volume down so it flashed the rom and opoened the phone.
Now when I try to charge it I have to press the down volume cause otherwise it enters recovery mode 3.0 (because I suppose connecting the cable with mi 6 acts like power button)
I will try to open the phone and see if it is broken volume up or software problem.

in my case phone back to twrp after stay bootloop for like 15 minutes, stuck in V10.3.1.0 even today

RamonXick said:
in my case phone back to twrp after stay bootloop for like 15 minutes, stuck in V10.3.1.0 even today
Click to expand...
Click to collapse
Time for you to move to EU MIUI 11
It's already out

"HELP ME" Redmi 6 Pro stuck at MI logo, can't access Recovery mode

Hello Everyone,
I have a Redmi 6 Pro, with Chinese stable rom installed. My phone is stuck at MI logo at startup. I didn't do anything abnormal with it.
I can only access the Fastboot mode by pressing Vol down and power button. And nothing else. Pressing Vol up and power or pressing all buttons at once doesn't do anything, (Just goes to the logo screen and stays there.)
I am trying to reinstall the same rom using Fastboot method (Since it's the only way, I can't access recovery mode). but it's bootloader is locked. And I can't unlock it using the MI flash unlock tool. Because it requires modifying developer settings in phone, which I can't access.
I tried other unofficial method to unlock bootloader but it didn't work because that requires recovery mode. (Which I can't access.)
Please someone help me how do I unlock the bootloader, or just fix the phone any other way. I will be very glad if someone helps me get my phone running.
One more thing, I don't have any customer services center where I am right now, so that's out of the question.
EDIT: Sometimes (but rarely), the "Powered by Android" message also appears but then it stays there.
If you need any other information, Just ask me.
Thanks in Advance.

same issue here only fastboot option. tried edl/test mode but can't bypass edl authentication.

Rajeshsupernova said:
same issue here only fastboot option. tried edl/test mode but can't bypass edl authentication.
Click to expand...
Click to collapse
Seems like no one wants to reply.

My Mobile After Update Startup With After Mi Logo Automatic Show Recovery Mode

Lucius_47 said:
Hello Everyone,
I have a Redmi 6 Pro, with Chinese stable rom installed. My phone is stuck at MI logo at startup. I didn't do anything abnormal with it.
I can only access the Fastboot mode by pressing Vol down and power button. And nothing else. Pressing Vol up and power or pressing all buttons at once doesn't do anything, (Just goes to the logo screen and stays there.)
I am trying to reinstall the same rom using Fastboot method (Since it's the only way, I can't access recovery mode). but it's bootloader is locked. And I can't unlock it using the MI flash unlock tool. Because it requires modifying developer settings in phone, which I can't access.
I tried other unofficial method to unlock bootloader but it didn't work because that requires recovery mode. (Which I can't access.)
Please someone help me how do I unlock the bootloader, or just fix the phone any other way. I will be very glad if someone helps me get my phone running.
One more thing, I don't have any customer services center where I am right now, so that's out of the question.
EDIT: Sometimes (but rarely), the "Powered by Android" message also appears but then it stays there.
If you need any other information, Just ask me.
Thanks in Advance.
Click to expand...
Click to collapse
What happens when you try to unlock with official unlocker? u get error message or something? Also try to press power button and volume button continuously, let it reboot like that two three times, then leave power button as soon as u see the screen lighting on but keep pressing vol + till u see recovery. see if that takes u to the mi recovery, if it does then wipe data from recovery