So here is the situation:
Samsung Galaxy S3 T999 with no external SD card (at the moment).
Locked to TMobile, but running on StraightTalk.
Rooted using ODIN and Root66.
Installed CWM (whatever the most recent version is) by way of ROM Manager.
Installed Cyanogenmod 10.0.0-d2tmo.
Dorked around for a while.
Attempted to encrypt phone.
Encryption failed, and I am now faced with the ubiquitous "Encryption unsuccessful" error.
I can still access CWM, and can still put the phone in Download Mode. I have attempted to delete/clear all partitions/caches through CWM, but, unsurprisingly, that did nothing. Internal SD card will not mount.
I have been doing some reading throughout the various forums here, and while I am fairly sure how to proceed, I want to make sure before diving in:
1. Is this recoverable through ODIN / Root66?
1. a. Will I need an external SD Card for ODIN?
2. Barring that, has anyone found a better work-around than using an external SD card to boot your phone, and apparently ignoring the onboard storage?
Thanks for whatever help you can provide... I know just enough to root and flash, but this went *way* over my head .
ODIN was the trick - plugged in the phone, flashed it back to a rooted stock, it rebooted, had the whole "Encryption Unsuccessful" screen when it came back up, I may have uttered a few choice words, pushed the "reset" button, the phone sat there for a good long while, and came back up in the rooted stock. Flashed CM on the phone, and we are back at work again.
Note to self - no more whole-phone encryption. Bummer.
Coming from an HTC Incredible, this whole "ODIN" thing is downright awesome.
Glad you figured it out.
The Encyption Bug is affecting the S3s now?!?! I though it was only prevalent on the first Galaxy S Devices. Is this a Cyanogenmod issue?
I cannot say if it is THE "encryption unsuccessful" bug, but I cannot think of any other reason this would have happened - the phone was chugging merrily along at encrypting itself (about 35% last I paid attention to it) until it was not, in a safe location, away from pets / small children / etc. It was plugged in, charged adequately, and had a PIN already set.
Annoying as hell, but at least it was recoverable!
I just experienced the same issue. Encrytion fail galaxy s3 while I was on custom rom. I tried everything. First you need to go to sammobile and download the firmware that matches your device. Download the newest version of odin. Download the newest samsung drivers. Go in to odin and attach the tar file in the pda section of odin. Flash it! Ta Da! Back to stock. Now all you have to do is root and install cwm.
So the other day my S3 gave up the ghost, and developed the hard-brick "QHSUSB_DLOAD" error. I have insurance so I was overnighted a new phone, and am sending the old one away. I believe this was related to a long-term power button issue I was having, perhaps a virus, or something. I had not changed anything to the ROM I was using since about October, and the issue just happened now in May.
At any rate, the new S3 I received is an MJB version, Android 4.3, Knox and all that other good stuff. After several failed attempts, I found a method to root this phone and disable Knox. The Warranty Bit is already tripped, so clearly I'm not sending this phone back until it hard bricks as well. I am trying to install the StockMOD ROM that is very popular, however I am being plagued by problem after problem.
I was able to flash a version of CWM Recovery onto my phone, but it was too old and couldn't mount any of the folders. Using ROM Manager, I was able to flash an update to my Recovery, and now it mounts and views all folders properly. However, when I go to install the StockMOD ROM, I continuously get a Status 7 error, something about "expects 5 args, got 3." I wiped the data, cache, and Dalvik, but kept getting this error. So, I had to recover my backup of stock, which didn't go well either. Once my backup was installed, all of my apps kept crashing. Gapps, ROM Manager, everything kept giving me constant FC errors. I had to wipe my data, cache, and Dalvik again and go back to factory default, and reinitialize the phone. Luckily I haven't installed anything of importance on here yet.
A quick search through here states that I need to use TWRP as my Recovery. I've flashed TWRP several times, first using the 2.6... version and then the most recent 2.7.0.0 version, and neither of these will mount any of my folders. It just gives me a litany of errors trying to mount the various locations. I've done Fix Permissions and everything else, TWRP will just NOT mount anything. Other folks say I need the latest PhilZ Recovery. I've downloaded the latest PhilZ Touch 6 and flashed it via Odin. It is giving me the same errors as regular CWM, Status 7, "expecting 5 args, got 3."
I don't know what else to do. My S3 that ran Android 4.0 was so much easier. I had that thing rooted and running a TW based ROM with Nova launcher in about 30 minutes. This phone has been a disaster since I turned it on. I'm just trying to get a 4.3 TW based ROM. I like the Samsung Camera, Calendar, Clock, Messaging, and Contacts apps far better than AOSP versions. But I also want much more customization to my notification drawer toggles. Stock TW doesn't have the toggles I use frequently like the data toggle as well as the torch toggle.
I don't know what I'm doing wrong, because unlike a lot of folks out there, once I find a ROM I like, I stick with it. I'm not constantly updating, changing, or searching for the newest version of Android. There's nothing wrong with that, it just isn't my cup of tea. So does anyone know what I need to do? At this point, I'm about to just give up and use Nova over top of rooted stock TW and call it a day.
Thanks!
Hey guys, i've been loving bringing new life to my s2, but i went to put the latest PA on today and it said "make sure you have the latest TWRP". So i hit up the twrp site and it listed a new 2.8.7.0 version. I did note that most threads showed the 2.8.6 rev but i figured since it was on the official site it would be safe. I booted into my current TWRP, i think it was ancient, like 2.7.x, and i loaded the img, no problem and it flashed fine. I rebooted into recovery and say the 2.7.8 at the top and thought "ok great". but when i went to install my new rom, i don't have the SD card accessible. It only shows me the main system, which is also odd because if i go to factory reset or wipe cache or anything, it tells me "no os installed". If i go to reboot it also tells me "no os installed", and i relaunched in a bunch of times and i can't get it to read my SD card to flash down or anything.
Any help / ideas would be greatly appreciated.
*i should note, it still boots into my old system, so it's still there, but sadly I can't get pas the sim card screen so i can't use the os to circumvent the above error..
no ideas eh? man i hope i'm not screwed. luckily it's a secondary device but still..
*edit. after going through a ton of things i figured out i might still be able to odin over a new recovery. So i'm messing with CWM mod now and going to see if i have better luck there. I can't belie i didn't think to just odin out after the last go, but admittedly i was pretty frustrated at the time.
update
ended up using the CM13 guide and flashing between the TWRP versions listed in the guide and getting the re-partition on the phone for larger systems. After that i was able to get all kinds of stuff going that was giving me hell before. currently (and happily) running cm13 after a brief flash to PA. Can't believe how well the community has a marshmellow based rom on this ol geezer.
I ran into the same problem too when I did my first recovery installation so basically we can't use the TWRP from the official site. The one we can use is from our forum. I used the one from Paranoid 5.1.1 or CM13. Thanks to the community, S2 is still alive.
So...
Last week, my wife's Tab S went into a bootloop. She runs complete stock, we haven't rooted, or anything. There had been a notification about an update, but she hadn't touched it. She'd updated to Lollipop at some point last year, but hadn't applied the absolute latest update. One day last week, she just turned it on, and it started bootlooping.
Because it was so stock, there were no backups, no nandroids, or anything like that. No Custom Recovery. I told her "well, we can just do a factory reset. You'll lose everything, but once we get you back up and running, it'll just re-download everything from the Goog." So we factory reset it. Looked good for a minute, booted into the first screen, enter in your Wi-Fi password, all that. As soon as we got the Wi-Fi password entered, however, it re-booted. And keep rebooting. Bootloop city. No problem. I walked her through (over the phone) using Odin to flash the latest Lollipop firmware. No dice. It appeared to flash successfully, but still bootlooped.
Over the weekend, I tried using Kies to flash the most official firmware I could find. Everything was successful -computer recognized the device, was able to download "direct from the source," as it were, but it got stuck at 69% twice before failing. I read somewhere that one had to run Kies in administrator mode to get it to successfully complete. So I did, and it got past 69%, successfully completing the flash. STILL NO LUCK. STILL WITH THE BOOTLOOPS.
Last night, I realized that I hadn't flashed in Odin using Administrator Mode. Tried it, using latest 5.0.2 (XAR-Cellular South). Flashed successfully, all appeared well. Still bootlooped.
So, I'm stuck. I can get into recovery, I can get into Download Mode, I can successfully flash. I just can't get the darn thing booted.
Thoughts, anyone? Should I try flashing a Custom ROM? How hard is that using Odin? Thanks in advance.
Ok this will take a few tries but here is my method of dealing with this situation
1) Flash stock using Odin
2) AS SOON AS the screen goes blank, start holding Power+Volume Up+Home
3) When recovery boots, release the buttons
4) Use the volume buttons to select "Wipe data/factory reset"
5) Press power to confirm
6) Reboot
If that doesn't work, you may either:
1) (more likely) Installing a ROM will fix the problem
2) (unlikely but possible) You might have worn NAND pages, which I doubt but could cause this behavior.
Nandr0idC0nsumer said:
Ok this will take a few tries but here is my method of dealing with this situation
1) Flash stock using Odin
2) AS SOON AS the screen goes blank, start holding Power+Volume Up+Home
3) When recovery boots, release the buttons
4) Use the volume buttons to select "Wipe data/factory reset"
5) Press power to confirm
6) Reboot
If that doesn't work, you may either:
1) (more likely) Installing a ROM will fix the problem
2) (unlikely but possible) You might have worn NAND pages, which I doubt but could cause this behavior.
Click to expand...
Click to collapse
Thanks, I'll try these steps tonight when I get home, and report back!
All right, here's something interesting. Before I tried your first step, I remembered that the other night, I left it stuck at the Samsung logo -it was just kind of stuck there, and since the behavior was a little different than I'd seen before (not continuous bootlooping), I thought I'd boot into recovery and wipe. I did, I wiped (factory reset), and rebooted. The tablet booted into the first screen, Accessibility/Wi-Fi, blahblah. This was where it usually rebooted. On a hunch, I bypassed entering in my WiFi key. I then bypassed almost everything else (Samsung account, Google account, etc.), expecting that the tablet would reboot at any moment. But I made it to the front apps page, where it shows you the side-launcher, the Magazine-Flipboard thingie, and whatnot. Wi-Fi still not connected, though. I opened up the app drawer, and scrolled around. Looked really good for a moment. I even took a picture with the camera, and viewed it in Gallery! Feeling brave, I thought, "well, maybe it just needed a couple of minutes before firing up the radio." So I went into settings, and inputted my WiFi key. It connected. And rebooted into its bootloop. (getting so tired of that boot-sound).
Went ahead and flashed the most original stock firmware I could find. As always, flashed successfully. As soon as it booted, I made my way to recovery, and wiped, per your instructions. No luck. Bootloop again.
It's something in the WiFi is what I've come to think as a result of the above. Which I don't entirely understand, as I thought the radio got re-flashed with the firmware.
I'm ready to try flashing a Custom Rom. Can I do that through Odin, or should I try and flash TWRP, and do it through there? Will TWRP flash without a working (bootable) OS?
All right. Thanks for your response!
Try this as a test.
First make a full backup of every partition with twrp including the EFS <<IMPORTANT!
Get it booting again without wifi then root the device and delete the EFS folder or delete it in recovery.
Reboot the device and try and enable wifi.
ashyx said:
Try this as a test.
First make a full backup of every partition with twrp including the EFS <<IMPORTANT!
Get it booting again without wifi then root the device and delete the EFS folder or delete it in recovery.
Reboot the device and try and enable wifi.
Click to expand...
Click to collapse
Got TWRP installed. Won't backup. Fails at 16% (system partition, I think). Just powers down to battery indicator in the middle of the backup. Looks like it backs up the EFS, though, since it's the first one. And when I go into TWRP's Restore option, there's a backup there (though I don't dare try and restore it).
Now I have to figure out a way to get the Custom ROM and GAPPS I downloaded onto the tablet without a reliable boot... It's gotten to the front screen a time or two tonight, but starts looping even when I bypass the WiFi setup.
Entered adb/TWRP interface. Tried to push two files, a Custom ROM file, and a GAPPS file. The ROM failed, with some sort of "Error 7," incompatible data, blahblah... Just out of curiosity, I tried to push the GAPPS file, and that failed after about 6%, and the tablet powered off.
I'm running out of ideas.
copied a custom rom to a USB/OTG stick (thumbdrive), and plugged it in. Fired up TWRP, tried to install. Wouldn't. Wouldn't install GAPPS, either. Looks like the only way it wants to flash anything is through ODIN or KIES.
The Latest...
All right...
I remembered that sometimes the TWRP version mattered. When I installed TRWP last night, I installed the latest and greatest, 3.0.2. Last night after I gave up, I remembered that sometimes, the latest and greatest TWRP doesn't install things perfectly. So, this morning, I downloaded TWRP 2.8.6-ish onto the USB/OTG device, and re-flashed the recovery partition. To be honest, I was surprised that TWRP was even able to flash that (but the TWRP image is only like 9.8 MB, so...)...
Got TWRP 2.8.6.0 flashed, and rebooted into TWRP. Immediately decided to try and re-flash the custom ROM that I'd tried unsuccessfully to flash last night, since the thumbdrive was still plugged in. Resurrection Remix Lollipop. Lined up GAPPS in the queue, as well. The ROM *appeared* to flash better than it had in TWRP 3.0.2, but it was sort of hard to see... GAPPS failed, and I was prepared to watch another round of bootloops. It did bootloop, sort of. The RR splash screen appeared, said that it was installing (or preparing) xx out of XX apps. Then, it rebooted. I figured it was doing its bootloop thing. However, it got to the same screen, "installing xx out of XX apps. Except that XX number had gone down, and the xx number had gone up. It repeated this action about 4 times --the last time I saw it reboot, it was "installing 1 out of 2 apps." And then...?
It booted into the RR lockscreen.
Of course, there were no GAPPS. In fact, there are something like only 20 apps total on the tablet. But it appears somewhat stable at the moment. (See picture).
Afraid to try and connect WiFi, afraid that it'll just bootloop.
Speaking of bootloop. At one point, once we got it booted, my wife hit an option in the Settings. LCD Density, I believe. As soon as she hit it (she literally just placed her finger over the 320 default option), the tablet rebooted. No loop, though. Rebooted straight back to the RR lockscreen.
So I appear to have a somewhat stable OS flashed onto the tablet at the moment. No GAPPS, though. No WiFi.
Anybody have a suggestion on where to go from here? I have my doubts as to whether or not I can even back up this configuration.
Sorry about all the updates. I kind of figured that if *anyone* else ever goes through what I'm going through, they'll have some sense of all the different things that can be tried in resurrecting a bricked/bootlooping device. I appreciate everyone's efforts to date -thank you so much, @Lightn1ng and @ashyx.
All right, because I can't leave well enough alone....
I got WiFi up and working. Tablet still stable and working. Wheeeee.... No GAPPS, though.
Downloaded GAPPS, second-smallest package from opengapps- only 128M (5.1 ARM package). Downloaded it in Android, from the tablet! Tried to flash it in TWRP. Failed, tablet rebooted halfway (not even) through. Now it's bootlooping again...
I should've left well enough alone, and waited for someone. Have tried re-installing Resurrection Remix, but tablet keeps failing to flash. Might have to try and flash a different TWRP. I don't know...
Have you tried another Gapps? Also, is this the WiFi only model or the LTE model we're talking about?
Lightn1ng said:
Have you tried another Gapps? Also, is this the WiFi only model or the LTE model we're talking about?
Click to expand...
Click to collapse
It's the WiFi-only model - SM-T800.
It's kind of weird. I thought it might be some sort of internal memory problem (like the worn Nand pages you mentioned), since almost anything I try to do in TWRP fails (although I was able to flash an entire Custom ROM the one time AND get it booted) -but backing up isn't working, whether it's to internal/external SD. And the fact that I can flash perfectly (subjective term there) well using Odin or Kies tells me that whatever problems the tablet is having, something's getting through.
I'll try a different GAPPS package. Right now, though, TWRP isn't letting me flash hardly anything, and moving files back and forth on this thing is just awful.
AGH - I was so close!
daina said:
It's the WiFi-only model - SM-T800.
It's kind of weird. I thought it might be some sort of internal memory problem (like the worn Nand pages you mentioned), since almost anything I try to do in TWRP fails (although I was able to flash an entire Custom ROM the one time AND get it booted) -but backing up isn't working, whether it's to internal/external SD. And the fact that I can flash perfectly (subjective term there) well using Odin or Kies tells me that whatever problems the tablet is having, something's getting through.
I'll try a different GAPPS package. Right now, though, TWRP isn't letting me flash hardly anything, and moving files back and forth on this thing is just awful.
AGH - I was so close!
Click to expand...
Click to collapse
I'm running out of ideas!
Maybe somebody else with a T800 could backup their entire EMMC using
Code:
dd if=/dev/mmcblk0 of=/sdcard/full_nand_dump.bin
And you take the file on your tablet and do
Code:
dd if=/sdcard/full_nand_dump.bin of=/dev/mmcblk0
And restore YOUR efs folder using TWRP.
THIS IS A DANGEROUS OPERATION AND I AM NOT RESPONSIBLE FOR ANYTHING THAT GOES WRONG!
---------- Post added at 08:01 PM ---------- Previous post was at 07:57 PM ----------
@ashyx Any more ideas before I go ahead with my evil world domination plan to recover this device?
I wouldnt carry out any risky operations until a full backup can be made with twrp or you may end up with an unrecoverable device.
If twrp cannot backup the system partition then there is an issue with the partition.
Try backup again and post the recovery log, it may contain some relative information.
I have the same issues and have tried eveything. I was rooted and running the latest Pheonix rom on my sm-t800. Last Wednesday (8-10) I starting getting boot loops out of nowhere, no new apps nothing just a daily driver. I've been through everything on here and have gone back to bone stock but to no avail, the boot loops just keep coming. I can connect to wifi and get things set up but if I try to use anything more than 'light usage' the tab starts its boot loops again and rows fits for about 10 minutes and always different timing on the boot. Sometimes it will make it to the Samsung logo, sometime only to Tab S and sometimes about 10 seconds of usage.. I know this isn't helping much but wanted to let you know there are more of us with the same problem. Will be blab to try anything to help said issue.
Exactly the same issue on my LTE version.
Samsung support just asked me 230€ for a new motherboard.
I refused to repair. I think it is related to nand memory..
Hello I have both the 8.4" and 10.5" I updated the 8.4" to Android 5.02 nothing but boot loops my other is still on 442 and I wont be updating it as its working fine. I have been reading a few posts and the problem was right in front of me all the time I have 2 internet connections 2.4 GHZ and 5.0 GHZ if I connect to the 5.0 GHZ I get boot loops but if I stay on 2.4 GHZ no problems what so ever so I may just install a custom rom and my 10.5 tab and stay clear of the faster internet.
srfairhurst said:
Hello I have both the 8.4" and 10.5" I updated the 8.4" to Android 5.02 nothing but boot loops my other is still on 442 and I wont be updating it as its working fine. I have been reading a few posts and the problem was right in front of me all the time I have 2 internet connections 2.4 GHZ and 5.0 GHZ if I connect to the 5.0 GHZ I get boot loops but if I stay on 2.4 GHZ no problems what so ever so I may just install a custom rom and my 10.5 tab and stay clear of the faster internet.
Click to expand...
Click to collapse
Why not just update to Marshmallow? Absolutely no issues for me.
ashyx said:
Why not just update to Marshmallow? Absolutely no issues for me.
Click to expand...
Click to collapse
Now i figured out its the wifi thats causing the problem i will update to android 6.01 or if i can find a good custom rom il risk that.
daina said:
It's the WiFi-only model - SM-T800.
It's kind of weird. I thought it might be some sort of internal memory problem (like the worn Nand pages you mentioned), since almost anything I try to do in TWRP fails (although I was able to flash an entire Custom ROM the one time AND get it booted) -but backing up isn't working, whether it's to internal/external SD. And the fact that I can flash perfectly (subjective term there) well using Odin or Kies tells me that whatever problems the tablet is having, something's getting through.
I'll try a different GAPPS package. Right now, though, TWRP isn't letting me flash hardly anything, and moving files back and forth on this thing is just awful.
AGH - I was so close!
Click to expand...
Click to collapse
DrinkSlinger said:
I have the same issues and have tried eveything. I was rooted and running the latest Pheonix rom on my sm-t800. Last Wednesday (8-10) I starting getting boot loops out of nowhere, no new apps nothing just a daily driver. I've been through everything on here and have gone back to bone stock but to no avail, the boot loops just keep coming. I can connect to wifi and get things set up but if I try to use anything more than 'light usage' the tab starts its boot loops again and rows fits for about 10 minutes and always different timing on the boot. Sometimes it will make it to the Samsung logo, sometime only to Tab S and sometimes about 10 seconds of usage.. I know this isn't helping much but wanted to let you know there are more of us with the same problem. Will be blab to try anything to help said issue.
Click to expand...
Click to collapse
Hello,
and the rest of story??
i can flash TWRP in download mode, and i can intall zip by TWRP , the lineage rom,
but, cant odin flash official md5 file, it stucks on logo.
Hello,
It all began that i just wanted to restart my Oneplus3 unlocked with lineage 15.
But then back in Lineage15 i wasnt able to use my pin anymore + it restarted after few seconds...
Afterwards i ended up in a lineage bootloop.
Ok, then i thought then i do a fresh flash with new lineage 16.
I tried to flash but it said i need to install new modem firmware for Lineage16.
I downdloaded the new 9.0.5 modem + firmware and flashed it from here : https://forum.xda-developers.com/oneplus-3/how-to/op3-flashable-firmware-modem-zips-t3816066
Then i tried to flash LOS16 again but it failed due to some errors on unable to mount some partitions (cache , system, etc).
So i thought i need to wipe or reformat them, as some people suggested to switch from ext4 to fat and back to reinit the partition.
I did this for at least system and internal storage. ( i learned that it was a dumb idea )
Afterwards i was not able to push anything anymore through MTP in TWRP, but i was still able to sideload or push images via adb.
Afterwards i tried to flash LOS16 or LOS15 via TWRP again but it always ends up to a "unable to mount /system (invalid argument" error at some point of the installation.
I thought: Okey maybe i go back to stock as i messed up the internal file system somehow, and go back to LOS afterwards.
So i flashed the stock recovery for nougat which i got from here: https://www.****************/2017/0...th-latest-oxygen-os-firmware-complete-unroot/
Then i tried to flash various stock Oxygen roms with the stock recovery, by using wipe + system reset + adb sideload:
4.02, 4.51, 5.08, 9.0.5
4.02 and 9.0.5 didnt run until the end.
Flashing 5.08 works but ends up in a black screen when starting it.
Flashing 4.51 works but when i start it i run into a bootloop ( 2 Dots circuling forever )
I also tried to use the 4.51 version to flash LOS again but it did not work out
I just tried again to flash 4.51 but it also didnt work out anymore. :\
So, what do you think i could do to get a working OS on my system again?
Did i do something on the installation of LOS or Oxygen ?
Can i use a backup from a friends Oneplus3_T to get a working system partition / full OS again?
Should i unbrick the phone by using one of various guides to go back to fully stock? I am kind of afraid of this, as some people describe some final brick in the threads which may be caused by modem firmware problems (Sahara issue). https://forums.oneplus.com/threads/guide-oneplus-3-3t-unbrick.531047/ or https://forums.oneplus.com/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/
Thank you so much, i kind of getting mad about it
@julledd
Backup from 3T seems like a bad idea.
You may have a hardware issue.
Your best bet is to use one of the tools available in the various unbrick guides. If one doesn't work, try another.
Best of luck!
Hi thx for your help!
i tried different unbrick tools (9.0.5 / 3.1.2 / 4.0.5) and after several attempts i get it flashed to the phone. But in the end it still ends up in a bootloop, either at the android logo or the circuling dots. Via Sideload i am also not able to flash a new OS. It always breaks somewhen >50%.
In very rare cases i am then able to go to the OS, but when i go to "About Phone" to unlock it for TWRP, it freezes before showing anything. I guess there is internally something broken which forbids it to show the internal state of the phone. Every boot is different, and i cannot see any system in this failure of my phone.
Do you have any more hint?
I am already at a point where i want to exchange the main PCB.. Is this possible for the Oneplus3? Can i also exchange it with a Oneplus3T PCB?