So here is the situation:
Samsung Galaxy S3 T999 with no external SD card (at the moment).
Locked to TMobile, but running on StraightTalk.
Rooted using ODIN and Root66.
Installed CWM (whatever the most recent version is) by way of ROM Manager.
Installed Cyanogenmod 10.0.0-d2tmo.
Dorked around for a while.
Attempted to encrypt phone.
Encryption failed, and I am now faced with the ubiquitous "Encryption unsuccessful" error.
I can still access CWM, and can still put the phone in Download Mode. I have attempted to delete/clear all partitions/caches through CWM, but, unsurprisingly, that did nothing. Internal SD card will not mount.
I have been doing some reading throughout the various forums here, and while I am fairly sure how to proceed, I want to make sure before diving in:
1. Is this recoverable through ODIN / Root66?
1. a. Will I need an external SD Card for ODIN?
2. Barring that, has anyone found a better work-around than using an external SD card to boot your phone, and apparently ignoring the onboard storage?
Thanks for whatever help you can provide... I know just enough to root and flash, but this went *way* over my head .
ODIN was the trick - plugged in the phone, flashed it back to a rooted stock, it rebooted, had the whole "Encryption Unsuccessful" screen when it came back up, I may have uttered a few choice words, pushed the "reset" button, the phone sat there for a good long while, and came back up in the rooted stock. Flashed CM on the phone, and we are back at work again.
Note to self - no more whole-phone encryption. Bummer.
Coming from an HTC Incredible, this whole "ODIN" thing is downright awesome.
Glad you figured it out.
The Encyption Bug is affecting the S3s now?!?! I though it was only prevalent on the first Galaxy S Devices. Is this a Cyanogenmod issue?
I cannot say if it is THE "encryption unsuccessful" bug, but I cannot think of any other reason this would have happened - the phone was chugging merrily along at encrypting itself (about 35% last I paid attention to it) until it was not, in a safe location, away from pets / small children / etc. It was plugged in, charged adequately, and had a PIN already set.
Annoying as hell, but at least it was recoverable!
I just experienced the same issue. Encrytion fail galaxy s3 while I was on custom rom. I tried everything. First you need to go to sammobile and download the firmware that matches your device. Download the newest version of odin. Download the newest samsung drivers. Go in to odin and attach the tar file in the pda section of odin. Flash it! Ta Da! Back to stock. Now all you have to do is root and install cwm.
Related
I apologize in advance if any of this makes you roll your eyes at my stupidity.
Good Afternoon
I have an ATT samsung galaxy s3, Because of the glitches with 4.3 I was experiencing I decided to install custom software on my phone. So I looked up guides and got everything I needed. I did manage to get root access, and verified with super user. I also installed TWRP and CWM because each kept giving me errors when I tried to install CM 11 onto my phone. I tried CWM first, and when that didn't work I tried TWRP. It says there was no MD5 information found when I try to install any mod. how ever I have used the md5 file checker program and the MD5 matches up to what was listed in this one for example.
http://forum.xda-developers.com/show....php?t=2518998
Download:
CM 11.0 Unofficial Beta 7 for d2tmo and d2att
MD5: ef93957db1e6704f23f9015231a82826
So the MD5 matches, yet when I try to install it keeps giving me errors. I also tried other versions of CM that I found on here via links. Right now my phone has no OS as another guide I read some where also said to wipe system data (sorry if that was stupid, I was just following a guideline) And even more stupid, no I don't have a backup because in my naivety and stupidity I didn't think I'd need one as it seemed so simple from all the guides and videos I'd seen.
Yesterday a friend of mine knowledgeable with tech stuff took one of the original stock Image ROMs I'd downloaded and using linux and some program he managed to do some crazy stuff I can't even describe on here. All I saw was a lot of typing of command lines and it got my phone working again, how ever it wasn't exactly the stock image I guess because the phone would not make or receive calls/texts.
Since my phone was powering on again and the android OS was loading I figured I could connect it to my computer and use KIES to download the official latest update so my phone would be back on the legit software. But trying to do that...well broke my phone again. So I'm at a loss now of what to do. Right now I can still get to download mode on my phone, but when I try to get into recovery mode I get an error that "firmware upgrade encountered an issue. Please select recovery mode in KIES & try again." Which I've tried, and every time I try it gives me an error message.So I'm at a loss of what to do next.
So I'd like to get a working OS on my phone asap so I can get calls and texts.
Any help would be greatly appreciated. And being new I'm sorry if I broke any taboos or did not give some information that is typically given when describing a problem.
gvazquez82 said:
I apologize in advance if any of this makes you roll your eyes at my stupidity.
Good Afternoon
I have an ATT samsung galaxy s3, Because of the glitches with 4.3 I was experiencing I decided to install custom software on my phone. So I looked up guides and got everything I needed. I did manage to get root access, and verified with super user. I also installed TWRP and CWM because each kept giving me errors when I tried to install CM 11 onto my phone. I tried CWM first, and when that didn't work I tried TWRP. It says there was no MD5 information found when I try to install any mod. how ever I have used the md5 file checker program and the MD5 matches up to what was listed in this one for example.
http://forum.xda-developers.com/show....php?t=2518998
Download:
CM 11.0 Unofficial Beta 7 for d2tmo and d2att
MD5: ef93957db1e6704f23f9015231a82826
So the MD5 matches, yet when I try to install it keeps giving me errors. I also tried other versions of CM that I found on here via links. Right now my phone has no OS as another guide I read some where also said to wipe system data (sorry if that was stupid, I was just following a guideline) And even more stupid, no I don't have a backup because in my naivety and stupidity I didn't think I'd need one as it seemed so simple from all the guides and videos I'd seen.
Yesterday a friend of mine knowledgeable with tech stuff took one of the original stock Image ROMs I'd downloaded and using linux and some program he managed to do some crazy stuff I can't even describe on here. All I saw was a lot of typing of command lines and it got my phone working again, how ever it wasn't exactly the stock image I guess because the phone would not make or receive calls/texts.
Since my phone was powering on again and the android OS was loading I figured I could connect it to my computer and use KIES to download the official latest update so my phone would be back on the legit software. But trying to do that...well broke my phone again. So I'm at a loss now of what to do. Right now I can still get to download mode on my phone, but when I try to get into recovery mode I get an error that "firmware upgrade encountered an issue. Please select recovery mode in KIES & try again." Which I've tried, and every time I try it gives me an error message.So I'm at a loss of what to do next.
So I'd like to get a working OS on my phone asap so I can get calls and texts.
Any help would be greatly appreciated. And being new I'm sorry if I broke any taboos or did not give some information that is typically given when describing a problem.
Click to expand...
Click to collapse
same error happened to me yesterday and spent the whole day figuring it out. get into download mode. boot up ODIN and reflash your preferred custom recovery. after that, i couldn't find anything else to restore my phone with so i installed 4.3 leaked from here. doesn't matter which one you select. http://forum.xda-developers.com/showthread.php?t=2498233. place it on your sd card and head into recovery mode, wipe data/factory reset and cache. head to install zip from sd card and select the 4.3 zip you downloaded. reboot system and it should work. the at&t boot screen takes a while so be patient
MrHaPpY66 said:
same error happened to me yesterday and spent the whole day figuring it out. get into download mode. boot up ODIN and reflash your preferred custom recovery. after that, i couldn't find anything else to restore my phone with so i installed 4.3 leaked from here. doesn't matter which one you select. http://forum.xda-developers.com/showthread.php?t=2498233. place it on your sd card and head into recovery mode, wipe data/factory reset and cache. head to install zip from sd card and select the 4.3 zip you downloaded. reboot system and it should work. the at&t boot screen takes a while so be patient
Click to expand...
Click to collapse
First of all thank you for trying to help me, I hope you are having a good Thanks Giving.
I used the thread you linked to, and downloaded the version with out knox. I followed the instructions
transferred ROM and flashed kernel file to SD card
used odin to flash TWRP,
used twrp to flash rom and kernel file.
and it takes the file thankfully, there's only one issue. My phone can't make or receive calls/texts. Is yours able to?
I messed up and was playing with things That I had no business playing with and decided that I should do a restore of a backup (TWRP) I made as soon as I rooted the 4.3 OTA. well it has soft bricked my phone. it was a TWRP 4.3 Nandroid and has me messed up a little.
so far I tried My nandroid (no dice now a soft brick) cleared cache and dalvik, It was booting as far as the white at&t spinning thing,
Factory reset same on booting,
Tried a format of the internal sd this is where it gets sketchy it now goes as far as the second samsung screen(the one that says Samsung GALAXY S III)
4.3 OTA .zip (no dice TWRP wont flash it) same on the booting 2nd samsung boot screen
Tried the files in the link above and got a Hard brick
Used the debricking .IMG file and got TWRP and download mode back
Any suggestions?
Looks like I might need a JTAG/RIFF BOX for this one. If nothing else I spent many Hours of darkness discovering the darkness of android 4.3
If I get recovered from this and with a different rom like 4.1.2 I will be happy. the 4.3 OTA was very stable but I did miss wifi tether and the whole hardbrick thing was kind of a bummer. it would be real nice to have an ODIN file to fix this (AHEM samsung) or atleast perhaps stopped the progression of it to a hard brick.
New update
I got my phone booting up again however there is a catch. That unbrick.img file on my 16GB sd card is still required to boot the phone and I have no cell service what so ever. Tried to check apn settings because at home I sometimes get poor service and I run net10 so I was going to fix my apn and it says insert sim??? the sim is properly inserted???
Next Update
the bootloader I flashed apparently flashed to the external sd card? I flashed another one and it is booting from the internal sd. I had to flash a different modem the one in the bootloader/modem file I flashed from the link above didnt take? I got most everything sorted out, but im getting tired, it has been an all night adventure. its 08:23 est now
sorry for the delay in updating this I had to get some rest.
theramsey3 said:
I messed up and was playing with things That I had no business playing with and decided that I should do a restore of a backup (TWRP) I made as soon as I rooted the 4.3 OTA. well it has soft bricked my phone. it was a TWRP 4.3 Nandroid and has me messed up a little.
so far I tried My nandroid (no dice now a soft brick) cleared cache and dalvik, It was booting as far as the white at&t spinning thing,
Factory reset same on booting,
Tried a format of the internal sd this is where it gets sketchy it now goes as far as the second samsung screen(the one that says Samsung GALAXY S III)
4.3 OTA .zip (no dice TWRP wont flash it) same on the booting 2nd samsung boot screen
Tried the files in the link above and got a Hard brick
Used the debricking .IMG file and got TWRP and download mode back
Any suggestions?
Looks like I might need a JTAG/RIFF BOX for this one. If nothing else I spent many Hours of darkness discovering the darkness of android 4.3
If I get recovered from this and with a different rom like 4.1.2 I will be happy. the 4.3 OTA was very stable but I did miss wifi tether and the whole hardbrick thing was kind of a bummer. it would be real nice to have an ODIN file to fix this (AHEM samsung) or atleast perhaps stopped the progression of it to a hard brick.
New update
I got my phone booting up again however there is a catch. That unbrick.img file on my 16GB sd card is still required to boot the phone and I have no cell service what so ever. Tried to check apn settings because at home I sometimes get poor service and I run net10 so I was going to fix my apn and it says insert sim??? the sim is properly inserted???
Click to expand...
Click to collapse
Go into Settings, About Phone, Status and check to see if your IMEI and Serial Number are present. If you only lost your IMEI there's a guide on how to inject it back (I'm not sure where the guide is). However if you've lost your serial number and don't have a Nandroid that can restore it I don't know what to do.
spongdangly said:
Go into Settings, About Phone, Status and check to see if your IMEI and Serial Number are present. If you only lost your IMEI there's a guide on how to inject it back (I'm not sure where the guide is). However if you've lost your serial number and don't have a Nandroid that can restore it I don't know what to do.
Click to expand...
Click to collapse
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
gvazquez82 said:
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
Click to expand...
Click to collapse
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
theramsey3 said:
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
Click to expand...
Click to collapse
I will give that a shot, but what's an APN, sorry. And how do I create one, and is it needed for me to do so?
gvazquez82 said:
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
Click to expand...
Click to collapse
It should be, I'm working right now so I don't have time to fine the guide on how to inject your IMEI. If I remember correctly it involves using QPST. If you have an old (or any) working Nandroid backup that should fix the problem.
FYI, make sure you don't use the guide for the international S3 as it has different hardware and folder structure/contents.
As for the APN, it should automatically fill itself in since it reads it off the SIM Card (I might be wrong).
theramsey3 said:
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
Click to expand...
Click to collapse
I tried it and it work!!!!!!!!!!!!!!!!!
67 texts just came in. Sir, I thank you oh so kindly. You have made this gloomy rainy day oh so joyous.
No problem. Glad I could help you.
The real credit should go to -Mr.X-, loserskater and anyone else(no disrespect there were alot of files) whose stuff I tried to flash lastnight thank you all in the dev community who contribute.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
So I guess the next question, do I try again to install kit kat on my phone.
I've already made bucks of my existing working phone haha....but I'd still like to have kitkat in place. I believe the issue of my phone not reading MD5 confirmations would still be in place, does anyone know how to remedy that situation?
At the same time I'm more than happy to leave my phone as is.
gvazquez82 said:
So I guess the next question, do I try again to install kit kat on my phone.
I've already made bucks of my existing working phone haha....but I'd still like to have kitkat in place. I believe the issue of my phone not reading MD5 confirmations would still be in place, does anyone know how to remedy that situation?
At the same time I'm more than happy to leave my phone as is.
Click to expand...
Click to collapse
Pretty sure you can turn off MD5 checks in TWRP. Probably in CWM too. Sorry if this has been mentioned. Didn't have time to read the whole thread. Just skimmed through.
2nd, there is a major difference between an IMEI that reads 0 and an IMEI that shows unknown. If it shows an unknown simply reflash your ROM and modem and you will be good to go. Sometimes a reboot is all you need. If your IMEI is showing a 0 on the other hand its gone and will require that it be injected back in which is a messy situation that usually results in tour phone being stuck on EDGE.
3rd, as someone mentioned on the previous page, restoring a working nandroid will NOT reinject your IMEI if it shows up as 0. No amount of flashing anything will get it to come back. Not even stock. It needs to be reinjected manually.
flexfulton said:
Pretty sure you can turn off MD5 checks in TWRP. Probably in CWM too. Sorry if this has been mentioned. Didn't have time to read the whole thread. Just skimmed through.
2nd, there is a major difference between an IMEI that reads 0 and an IMEI that shows unknown. If it shows an unknown simply reflash your ROM and modem and you will be good to go. Sometimes a reboot is all you need. If your IMEI is showing a 0 on the other hand its gone and will require that it be injected back in which is a messy situation that usually results in tour phone being stuck on EDGE.
3rd, as someone mentioned on the previous page, restoring a working nandroid will NOT reinject your IMEI if it shows up as 0. No amount of flashing anything will get it to come back. Not even stock. It needs to be reinjected manually.
Click to expand...
Click to collapse
do you know of a good stable kit kat like ROM I could use for the s3? And any speculation as to why the ROMs werent taking for me?
Disclaimer: I am not responsible for any damage or liability arising out of these steps. I did not invent anything, I just tried something. Only move forward at your risk
If you don't agree ... stop reading and move on...
Background: Our phone has access to so much personal information that its scary if it fell into wrong hands. The only way to fix this is to encrypt phone. I did lot of research and here is a working solution that works for me - try at your risk.
Download Links:
a) Tested with ROM Stock 4.4.4 NH7 Galaxy S4 M919/Jfltetmo by @ShinySide
b) Tested with ROM |ROM|★KANGAKAT★|►KTU84P◄|4.4.4|Xposed|►8◄|6.26.14 by @iB4STiD
c) stock recovery AT&T S4 works with M919
d) Philz/CWM custom recovery
Encrypting with custom rom
1) Assume you are on custom recovery. - Backup everything first. Create a nandroid backup
2) Do a full wipe and install one of the two roms linked above (I have tested with few other roms ... none worked). Start the phone and set it up the way you want. Install all apps etc.
3) ODIN Stock recovery. See #c under download above. Its AT&T stock recovery but works for me. You need to know how to ODIN - find out. Doing this wrong will permanently damage your phone
4) Start your phone and turn on encryption. You will need to set lock type = password and will need to connect to charger and have 80% charge.
- Phone will do blank and stay blank for 20-30 minutes. Do not do anything. Encryption is happening behind the scenes.
- You might have to do this twice or thrice if it did not encrypt first time. For me the phone went blank first time and after 25 minutes it restarted but device was not encrypted. I redid the same steps and worked second time.
- If you interrupt the encryption process (battery pull or power up) you will see error message (encryption failed, reset device)
5) If all goes well you now have a password protected encrypted phone with custom rom!!! Check in Settings -> Security
6) You may install custom recovery ... but I don't see the point because you will need stock recovery to decrypt
To install another ROM
1) Reboot into stock recovery, then wipe data and cache (this removes encryption).
2) install your recovery of choice and install ROM using recovery. Philz/CWM
Credit goes to @Tronicus and his reply Flash a Rom on an Encrypted Android
Tronicus said:
How to Flash a rom on an encrypted Android phone (specifically this one, the I9505 SGH-I337).
The Problem: Once encrypted, you can't decrypt it easily. When encrypting the phone android will tell you you can only decrypt it using a factory reset. Naturally you assume it's talking about the "Factory Data Reset" option found in Settings --> Backup and Reset. But noooo, Android is lying through its ****ing teeth. Then you'll assume you have to wipe everything from your custom recovery mod (CWM, TWRP, or one of those). Wrong again! You'll get beautiful "can't mount /data" messages and more bull****. I read about a workaround that required installing the new rom using ADB, but I had ingeniously disabled USB debugging prior to wiping everything, so I only got so far with that option (plus it's tediously long if you haven't installed all the necessary software already and don't feel like bricking your phone because you made a typo in the command line). So, apparently the only other way to really format that partition free of its encryption is to use a stock recovery. So:
Short Version for Godlike users who know automatically how to do all this **** without any help (mimicking how most help posts are finely detailed on this site): Flash stock recovery, wipe everything, flash your custom recovery and install your new rom.
Long version for us mortals who don't know everything and haven't already downloaded already every single bit of software on earth:
Backup all the stuff you want to save. This process will truly wipe EVERYTHING. You can do it manually, or you can use an app like Titanium Backup Pro to help you (find it on Google Play Store). Here's a nice guide which recommends what to restore and what not to restore: http://forum.xda-developers.com/showthread.php?t=1480343
Flash the stock recovery using Odin. You can download a stock recovery from here: http://forum.xda-developers.com/showpost.php?p=49687791&postcount=3 It's the link called "I337MK2stockrecovery.tar.md5" In case you don't know how to flash it with Odin, this short guide will help: http://forum.xda-developers.com/showthread.php?t=1506697
In step 6 replace "recovery.tar.md5" with the stock recovery you downloaded.
Wipe everything from the Stock recovery console. This little ****er will **** up the encryption all those sissies couldn't touch. You're welcome. You boot into recovery mode from a turned off phone by pressing simultaneously the volume up key + the home key + the power key until you see blue text appearing in the top left corner of your screen.
Reinstall your custom recovery. In my case I had installed the rom BEFORE flashing in the stock recovery (apparently it works, you just can't boot because of the encryption), so I was able to boot into the new rom before I returned to my custom recovery. Weird. Anyways, I recommend CWM. You can pick it up from this link: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte
For some weird reason they call the I337 version the "jflte" version. It's bonkers. Click there, and download the latest version that ends with .tar.md5. This version is upgradable via Odin, which we already used. Use the same instructions used as when you upgraded the stock recovery rom.
Boot into your recovery mod and flash your rom like you usually do.
A word about TWRP: it cost me many hours of work and I don't recommend it. Its website is outdated, and recommends using GooManager (which is no longer mantained) and doesn't work anymore for this. GooManager suggests using a new, different app, which doesn't have the option of installing TWRP. Then I tried using their TWRP Manager app from play store and the image file wouldn't download. Then I tried manually selecting the image file in TWRP manager that I downloaded from their site for use via the ADB method, and it bricked my phone... twice (using two different methods the app sugested). I tried so much because in theory TWRP has the ability to decrypt android's 4.4 encryption, but after looking at their github site I noticed it was filled with people's reports (including people with the S4) on how it wouldn't work decrypting squat. So I gave up, and installed CWM in 30 seconds.
Click to expand...
Click to collapse
Disclaimer: I am not responsible for any damage or liability arising out of these steps. I did not invent anything, I just tried something. Only move forward at your risk
cnewsgrp said:
One of the things I needed was the ability to encrypt my phone (device only not external SD) for security purpose. Our phones today gives access to lot of information that I would rather not fall in wrong hands. I did lot of research and here is a working solution.
Credit goes to @Tronicus and his reply Flash a Rom on an Encrypted Android
The quote looks long however it is really very simple. To install another ROM
- Install and reboot into stock recovery, then wipe data and cache (this removes encryption).
- Then install your recovery of choice and install ROM using recovery. Philz/CWM
This has been tested working on |ROM|★KANGAKAT★|►KTU84P◄|4.4.4|Xposed|►8◄|6.26.14 by @iB4STiD
This did NOT work on a Touchwiz ROM by same developer
I have not tested any other ROM
Click to expand...
Click to collapse
I don't know if it matters too much or not, but the stock recovery you linked to is for the AT&T S4. A good rule of thumb is to never use Odin to flash anything not specifically for your particular device... In this case the M919.
Sent from my SGH-M919 using XDA Premium 4 mobile app
lordcheeto03 said:
I don't know if it matters too much or not, but the stock recovery you linked to is for the AT&T S4. A good rule of thumb is to never use Odin to flash anything not specifically for your particular device... In this case the M919.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have tested stock recovery on M919 .. it works
Honestly im surprised its not talked about more since there is a big push for personal privacy when it comes to data. Encryption really is a pain in the ass to work with on android. Figuring out how to switch or update custom roms while encrypted will drive you insane. The easiest way is to just odin back to stock and start over, but that requires a computer anytime you need to flash anything.
I recently was trying out one of the 4.4.4 GPE roms and turned on encryption. It worked great until i started missing touchwiz and wanted to go back to HyperDrive TW. So the journey began...
First of all, i backed up everything to external storage since i knew everything on the internal storage would have to be wiped. I loaded the phone into recovery mode (using TWRP) and tried wiping, but all i got was a bunch of "Failed to mount" errors. Fine. Got the same error when trying to factory reset or wiping /system, /data, /cache, and anything else. Tried formatting to different file systems and then formatting back to the original but no luck. Fixing permissions didnt help. I just kept trying everything available multiple times.
Eventually it started wiping everything except the /data mount. Well... At least i could install new custom roms. Im not sure exactly what did it because i was just throwing everything at it. Anyways I got it to install, and booted into it. Nope.
Now it was saying I needed the password to decrypt the internal storage. It would detect wrong passwords fine, but as soon as i put the correct password in, it would allow me in, show the green android encryption picture, then blank screen. I thought it was just decrypting and setting up my rom but after a few hours my screen was still black and nothing was happening. Pulled battery and went back to TWRP.
I started wiping everything again and again and tried doing everything i could to wipe everything on the internal storage. Again, not sure what did it, but eventually got it all cleaned up and got a new rom installed and could boot into it.
The whole process probably took about 6-7 hours...
I dont even want to enable encryption on the new rom...
p-hil said:
Honestly im surprised its not talked about more since there is a big push for personal privacy when it comes to data. Encryption really is a pain in the ass to work with on android. Figuring out how to switch or update custom roms while encrypted will drive you insane. The easiest way is to just odin back to stock and start over, but that requires a computer anytime you need to flash anything.
I recently was trying out one of the 4.4.4 GPE roms and turned on encryption. It worked great until i started missing touchwiz and wanted to go back to HyperDrive TW. So the journey began...
First of all, i backed up everything to external storage since i knew everything on the internal storage would have to be wiped. I loaded the phone into recovery mode (using TWRP) and tried wiping, but all i got was a bunch of "Failed to mount" errors. Fine. Got the same error when trying to factory reset or wiping /system, /data, /cache, and anything else. Tried formatting to different file systems and then formatting back to the original but no luck. Fixing permissions didnt help. I just kept trying everything available multiple times.
Eventually it started wiping everything except the /data mount. Well... At least i could install new custom roms. Im not sure exactly what did it because i was just throwing everything at it. Anyways I got it to install, and booted into it. Nope.
Now it was saying I needed the password to decrypt the internal storage. It would detect wrong passwords fine, but as soon as i put the correct password in, it would allow me in, show the green android encryption picture, then blank screen. I thought it was just decrypting and setting up my rom but after a few hours my screen was still black and nothing was happening. Pulled battery and went back to TWRP.
I started wiping everything again and again and tried doing everything i could to wipe everything on the internal storage. Again, not sure what did it, but eventually got it all cleaned up and got a new rom installed and could boot into it.
The whole process probably took about 6-7 hours...
I dont even want to enable encryption on the new rom...
Click to expand...
Click to collapse
Yeah Encryption does not seem to work on TWZ roms. I tried on G Eye without luck.
I have updated op. Please check
Encryption will slow down your phone quite a bit. More battery usage + more CPU usage + slower phone = not worth it unless you've got some very private stuff you don't want being shared. Otherwise, 3rd party apps that lock a lot of files, can encrypt certain files, and hide others will do the trick perfectly well.'
Not trying to bash fully encrypting your phone, but I've tried it before and although I am very pro privacy, I had to eventually take it off due to all the extra hassle it created.
Don't know about slowing down. I am not seeing it. I feel differently about security.
Like I'm sure this topic hasn't come up before, but I've searched for hours and I'm probably just making things worse. I also just accidentally deleted this post halfway through. It's too late and I'm too tired and I have no working phone.
Bought an SGH-I747 on E-Bay. Got a Straight Talk SIM card kit, activated it, so far so good.
Rooted it with CF-Auto-Root. Worked pretty well, took a lot of reboots, upgraded the SU from the Play Store and it got rid of Knox. So far so good. Got everything all set up the way I like it. Happy.
It was running 4.4.2. I'm assuming it was the release prior to the November 12th OTA release, but I can't say for sure.
Phone downloaded and installed an upgrade automatically. Now, it won't boot. I get the SAMSUNG logo, then the Samsung Galaxy S III logo then nothing.
I retried the CF-Auto-Root, no change.
I booted into recovery (volume up, home and power on), did factory reset, no change.
Started looking around for a way to return it to stock. Found an upgrade43.zip file somewhere (I'm sorry I can't find where I got that now). Put it on the sdcard card and tried installing it with the recovery and it fails part way through.
At this point, I think I probably need to completely overwrite everything with something stock. I just don't know how to do that. I see posts on such subjects but they all have warnings that make me think I'm going to totally brick the phone, so I'm hoping someone can point me the right way. I'm not all that Android savvy, as you can tell.
Help.
Since your phone was running 4.4.2, do not attempt to flash any ROMs using that attempt to downgrade your bootloader to anything prior to 4.4.2.
Try this to get your phone up and running:
download the latest CM11 for the d2lte and save it to an external SD card: https://download.cyanogenmod.org/?device=d2lte
dowload the latest tar.md5 version of Philz Touch for the d2lte from here: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
boot phone in download mode, open Odin 3.07, do not check anything except f.reset.time, flash Philz via PDA box, remove USB cable when you see the word Reset appear in the status window, remove battery, replace battery, boot into recovery, format system, Dalvik, data, and cache, flash cm11, and reboot.
Thank you for your reply. There are a few things in there I don't quite understand, but I think I can figure it out.
I was going to attempt this...
http://forum.xda-developers.com/showthread.php?t=2658486
In fact, I did attempt it with TWRP last night after I posted here and new I still wasn't going to sleep. I kept getting an error about a bad ZIP file.
Is that stock restore a bad idea?
Do not attempt to flash an older bootloader. The mjb bootloader is from 4.3 and attempting to flash it could hard brick your phone.
I suggest doing what I suggested so you can confirm the bootloader and modem installed on your phone.
OK. Thanks. Probably a good thing I couldn't get it to work then.
Thank you so much. I have a working phone again. Now I just have to get it all set back up the way I like it.
I have to say, and it's probably words straight from the devils mouth, that I kind of wish I could have restored the Samsung stock software. It's just what I'm used to. But I will take what I can get.
A few questions. I like having root. But root is what got me in trouble in the first place. Is this going to be rooted now, or will I have to do that or am I better off just leaving it alone.
Second, I'm probably going to have questions since this is so different than what I'm used to (like I already can't find the Play store). Where is the best place to ask?
If you want root, one of the easiest ways to get it is to flash supersu from your custom recovery. Most ROMs are pre-rooted.
Many custom ROMs do not include Gapps. Just download and install the Gapps version for your ROM.
If you like the TW look, flash a TW-based ROM. Check out the development threads for different ROMs.
here is a thread for Q's that has some pretty good/friendly helpers on it if you need.
http://forum.xda-developers.com/showthread.php?t=2257421
"all i can really do , is stay out of my own way and let the will of heaven be done"
How to save in to external SD card
How do you save the file into the external SD card? I am having the same brick issue with my GS3.
To save a file to an external SD card, just put the card into a card reader and save the ROM to the SD card.
I had not used my phone for about 2 years. The last time I used it I had problems with it not being able to mount the E:\. I think the ROM I loaded onto it 3 years ago had me partition/format the internal sd card in an unusual way. Today, I was trying to fix it as I'm planning a trip and will need this phone. I came across 1 post that said to take my external SD card out of the T989D and format it on the computer. But this did not resolve the problem. Unfortunately, I thought I should upgrade it to Cyanogen 13. I followed the instructions to change the partition size of the internal SD by loading the pit file using Odin. This did not help my situation as now when the phone boots up, I get the jellybean X splash screen, it does looks like it progressing but then after a few minutes reboots and does the jellybean splash screen. again. If I follow the instructions on restoring back to stock, will it resolve my problem ? I'm worried that my internal SD card may have been formated/partitioned/encrypted which might make return to stock impossible ?
I was able to get life back into my T989D. I followed the steps in the link I posted above for restoring back to stock. However, the file provided by that poster didn't seem to have all the apps necessary. The phone booted up normally but when I went into settings, the UI would stop. I eventually downloaded T989DTLLG2_T989DKDOLG2_KDO directly from the sammobile site then applied the same procedure as the post in the above link. Now I'm on 4.0.4.
Can someone recommend a newer stable ROM that I can flash directly on top of 4.0.4 easily ? When I say easily, I mean not have to worry about parititioning or fiddling around with having to flash multiple versions of twrp and cwm ?
Hi, I'm completely inexperienced with rooting phones and upgrading firmware. But I think I've found the experts =)
I've got a Samsung S3 SGH-I747 which is running Android 4.4.2. I use it strictly with wifi and it has a AT&T SIM card that doesn't have a plan.
My goal is to upgrade the OS so that I can use the TD Bank ap. 2-3 months ago they stopped supporting Android 4.x. So I want to upgrade to Android 7 or 8. Which OS would you recommend? How can I do this?
I've got nothing on the device that I care about too much (just a couple aps that I'd need to reinstall). So wiping it would be fine.
I've also got a Windows PC and a SD memory card (from my camera) - which could be used.
Are you in Canada? If you are, isn't your phone an sgh-i747m?
audit13 said:
Are you in Canada? If you are, isn't your phone an sgh-i747m?
Click to expand...
Click to collapse
I'm not in Canada. TD Bank is in the US.
Gotcha. TD Bank (Toronto-Dominion) is headquartered in Canada which is why I thought you were in Canada.
Before flashing anything, be aware of the fact that there is always a risk to flashing a phone with the possibility of a hard brick. Be prepared to deal with such a situation.
I have used the following instructions with great success; however, you may not be so lucky. Proceed at your own risk.
In order to run a custom ROM, you need to flash TWRP: https://twrp.me/samsung/samsunggalaxys3att.html. Download the tar version.
I recommend flashing TWRP using Odin 3.07: https://forum.xda-developers.com/attachment.php?attachmentid=1168421
Open Odin, uncheck everything except f reset time, put the phone into download mode, flash TWRP in the PDA box. When you see the word reset in the status window, remove the USB cable from the phone, remove the battery, replace the battery, use the buttons to boot into recovery. Your phone should boot to the TWRP screen. Reboot the phone to ensure that the phone boots to the existing ROM. Reboot the phone and create a backup of the existing ROM and EFS folder to the SD card. Save both in a safe place.
Select the ROM you want to try and the appropriate version of GAPPs. Copy both to the micro SD card and place the card into the phone. Boot into TWRP, wipe data, system, cache, flash ROM, flash GAPPs, reboot.
I guess I'll order a micro SD card. My camera one is bigger.
Should I install Android 8? Can the phone handle it?
Thanks for the advice!
audit13 said:
Gotcha. TD Bank (Toronto-Dominion) is headquartered in Canada which is why I thought you were in Canada.
Before flashing anything, be aware of the fact that there is always a risk to flashing a phone with the possibility of a hard brick. Be prepared to deal with such a situation.
I have used the following instructions with great success; however, you may not be so lucky. Proceed at your own risk.
In order to run a custom ROM, you need to flash TWRP: https://twrp.me/samsung/samsunggalaxys3att.html. Download the tar version.
I recommend flashing TWRP using Odin 3.07: https://forum.xda-developers.com/attachment.php?attachmentid=1168421
Open Odin, uncheck everything except f reset time, put the phone into download mode, flash TWRP in the PDA box. When you see the word reset in the status window, remove the USB cable from the phone, remove the battery, replace the battery, use the buttons to boot into recovery. Your phone should boot to the TWRP screen. Reboot the phone to ensure that the phone boots to the existing ROM. Reboot the phone and create a backup of the existing ROM and EFS folder to the SD card. Save both in a safe place.
Select the ROM you want to try and the appropriate version of GAPPs. Copy both to the micro SD card and place the card into the phone. Boot into TWRP, wipe data, system, cache, flash ROM, flash GAPPs, reboot.
Click to expand...
Click to collapse
You can try different ROMs until you find one that suits your needs.
Android 8 may not work that well on your phone without bugs as 8.0 is quite new in comparison to the s3.
You can still flash a custom ROM without an SD card if you have TWRP installed. You can boot into TWRP, wipe cache, data, system, connect the phone to a computer, copy over the ROM and Gapps, and flash.
Only flash a custom recovery if you don't care about the Knox counter that voids the warranty. If you like touchwiz, you're out of luck because there are no Android 7 or 8 touchwiz ROMs, only AOSP/CM based ROMs for the S3.
Thanks for the advice! I've made it all the way to installing a ROM. What ROM should I install? I tried installing a Lineage OS one (https://forum.xda-developers.com/android/development/rom-lineageos-14-1-t3680656) but got an error saying it was for the wrong device. My device is a d2att.
Do I need something like this?
https://forum.xda-developers.com/galaxy-s3-att/development/lineage-14-1-d2att-rom-t3774764
So next I tried installing: OCT-N-WEEKLY-20170811-1820-d2att.zip which gave me an error because another package was already partially installed. I used the "wipe the cache" option. It prompted me to install root (second time). It rebooted and had a message about updating approximately 100 aps. Ask for wifi. Said "Just a Sec". Failed to find software on my PC to sync (good - as I don't want it to sync). Booted back into reset mode. Wiped it. Tried installing OCT-N d2att for a second time. And it finally worked!
Then I had to go back to reset mode to install Google Apps.
All in all this took about 3 hours of work and research.
Sidenote: For reset mode it was necessary to remove the battery for 30 seconds to get into reset mode (and then hold the volume up, middle key and power button until the second Samsung screen appears - I found instructions that said wait for the Samsung screen - but there are three Samsung screens!). I was unable to get into reset mode when I didn't remove the battery.
s3hacker said:
Thanks for the advice! I've made it all the way to installing a ROM. What ROM should I install? I tried installing a Lineage OS one (https://forum.xda-developers.com/android/development/rom-lineageos-14-1-t3680656) but got an error saying it was for the wrong device. My device is a d2att.
Do I need something like this?
https://forum.xda-developers.com/galaxy-s3-att/development/lineage-14-1-d2att-rom-t3774764
Click to expand...
Click to collapse
You can install any ROM you want that's compatible with your phone on the NE4/NJ1/NJ2 bootloader. You just have to find one you like the best.
s3hacker said:
So next I tried installing: OCT-N-WEEKLY-20170811-1820-d2att.zip which gave me an error because another package was already partially installed. I used the "wipe the cache" option. It prompted me to install root (second time). It rebooted and had a message about updating approximately 100 aps. Ask for wifi. Said "Just a Sec". Failed to find software on my PC to sync (good - as I don't want it to sync). Booted back into reset mode. Wiped it. Tried installing OCT-N d2att for a second time. And it finally worked!
Then I had to go back to reset mode to install Google Apps.
All in all this took about 3 hours of work and research.
Sidenote: For reset mode it was necessary to remove the battery for 30 seconds to get into reset mode (and then hold the volume up, middle key and power button until the second Samsung screen appears - I found instructions that said wait for the Samsung screen - but there are three Samsung screens!). I was unable to get into reset mode when I didn't remove the battery.
Click to expand...
Click to collapse
That ROM you installed, OCT-N-WEEKLY-20170811-1820-d2att.zip is a weekly. Meaning it's probably not suitable for daily use and may have non working functions and bugs. Good that you got custom ROMs booting though.
s3hacker said:
Hi, I'm completely inexperienced with rooting phones and upgrading firmware. But I think I've found the experts =)
I've got a Samsung S3 SGH-I747 which is running Android 4.4.2. I use it strictly with wifi and it has a AT&T SIM card that doesn't have a plan.
My goal is to upgrade the OS so that I can use the TD Bank ap. 2-3 months ago they stopped supporting Android 4.x. So I want to upgrade to Android 7 or 8. Which OS would you recommend? How can I do this?
I've got nothing on the device that I care about too much (just a couple aps that I'd need to reinstall). So wiping it would be fine.
I've also got a Windows PC and a SD memory card (from my camera) - which could be used.
Click to expand...
Click to collapse
I'm not sure how many of us are out there, tinkering around with the 8+ year old Samsung Galaxy S3 i747 . While I am a newbie, I have enjoyed flashing Custom ROM's , from CyanogenMod, thru various versions of Lineage, and now CrDroid. The newest O/S that I flashed is CrDroid ( based on Android 8 ). Runs great. Stable. Long battery life.
I have always used ODIN to INSTALL a 'recovery' system such as TWRP ( which is a .Tar file )
After TWRP is installed ( using ODIN ) I unplug phone from my computer. Then boot into TWRP recovery ( holding down the three buttons ). I do a clean install (flash) of the newest O/S that I can find ( Android 4.4.2 is really old ). It is that .Zip file that I flash, then reboot the phone. Always works for me. Eventually I learned how to back up all my contacts, SMS, logs, photos, etc.
My banking app works just fine.
BTW I am totally free of Google; no Google Play Store, no Google Pay, no Google Framework, no Gapps, no Google spyware, no Google bloatware, no Google tracking etc. I download all my apps as APK's which are readily available on the Net ( Google them . . . just kidding! ).
My older Samsung S3 i747 was a 'd2att' originally locked to Rogers, in Ottawa, Ontario, Canada. Then switched over to MTS (Manitoba Telephone System). Now running on Bell Canada. My replacement is also a Samsung S3 i747, originally running T-Mobile in Arizona, now running on Bell Canada.
These are damn fine phones.