voLTE disable for change rom? - Samsung Galaxy S9 Questions & Answers

Hello
I got a SM-G9600; I debranded using a TTT rom, however the Toggle for enable or disable voLTE is gone. I not sure if it is the rom. I tried to roll back to branded rom but odin doesn't let me do it.
Questions:
Change the rom could be the reason why the voLTE toggle is gone?
How I can roll back to my branded rom if show me like a downgrade being both rom oreo?
In advance, thank you for help
EDIT:
Add log:
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf.lz4
<ID:0/003> Complete(Write) operation failed.
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Related

boot loop odin Nand Write Start!!

So I've tried a lot of things, was running CMW and having some issues with cm11, so I wanted to go back to stock.
Found this thread:
http://forum.xda-developers.com/showthread.php?t=2582290
Tried to go through the same process because it seems like we had the same problem, Download mode works but Recovery doesn't.
I keep trying to flash:
philz_touch_6.07.9-i605.tar.md5
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I get the Nand Write Start!!
----------------------------------------------------------------------------------
So I tried check "Nand Erase All" and "T Flash"
End up with
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Erase...
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
It fails but doesn't tell me why. I've tried different USB ports, Different Computers, different cables,
------------------------------------------------------------------------
When I try Odin 1.3 I get
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Check MD5.. Do not unplug the cable..
<ID:0/003> Please wait..
<ID:0/003> Checking MD5 finished Sucessfully..
<ID:0/003> Leave CS..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Again doesn't show me what's failing.
So I'm at a total loss right now, I'm trying to avoid doing a PIT because everyone is talking about how it never works and just breaks phones. I'm not sure what other options I have because I can't get a boot loader on here that works.
Tried flashing:
I605_VRAMC3_RESTORE.tar.md5
and still end up with the same kinda results.
So any idea on what I should try next, still trying to avoid PIT because everyone has made it sound really scary.

[Q] Note 2 Odin Problem

Hello Xda Devs and members. I am stuck in a serious problem for me. I've recently flashed the lastest mj5 bootloader and today i wanted to flash philz or twrp(i have both on pc). The problem is that odin doesn't want to flash them. <ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am on 4.1.2 and I want to upgrade to 4.4.2. Help pls. Thank you!
So, can anyone help me pls!
So, can anyone help me pls!

Help pls.. I'm new to this AT&T root thing and I bricked my phone..

I was trying to downgrade through Odin 3.10 to 4.4.4.. now i'm stuck with a error
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Some one please help me if there is any way to fix this problem..
flash the orginaal stock firmware wait for the root. dont attempt to downgrade to 4.4.4 its not gonna work

Odin Firmware error

Hello, I am trying to install stock firmware on my note 4. I think I downloaded the correct firmware, but I am not technologically savvy and when I try to use Odin, I receive this error:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can someone please help me??
glopez12323 said:
Hello, I am trying to install stock firmware on my note 4. I think I downloaded the correct firmware, but I am not technologically savvy and when I try to use Odin, I receive this error:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can someone please help me??
Click to expand...
Click to collapse
On what firmware are you and what firmware did you download? Did you tried different version of ODIN?
Clicking from the Edge of Galaxy
norbarb said:
On what firmware are you and what firmware did you download? Did you tried different version of ODIN?
Clicking from the Edge of Galaxy
Click to expand...
Click to collapse
My phone was on 6.0.1 but I could not find the right firmware online so I tried to downgrade. Is that possible? And yes, I tried different versions of Odin :/
glopez12323 said:
My phone was on 6.0.1 but I could not find the right firmware online so I tried to downgrade. Is that possible? And yes, I tried different versions of Odin :/
Click to expand...
Click to collapse
When you go to settings ->about device what is your baseband version?
Clicking from the Edge of Galaxy
Unfortunately I do not have access to my phone anymore menus anymore. I can only access download mode and emergency recovery screen.
glopez12323 said:
Unfortunately I do not have access to my phone anymore menus anymore. I can only access download mode and emergency recovery screen.
Click to expand...
Click to collapse
In THIS THREAD is firmware EPH5 and ODIN witch worked on so many phones. Try this.

just another I9190 bootloop problem

Hello,
My s4 mini suddenly stopped working. I almost read the whole forum. Tried to update the pit file with odin etc.... But no chance? Can someone point me somewhere usefull because I am kinsda lost at the moment.
This is what happens when I try to wipe the data:
imgur.com/a/IOuZe
Odin log when I try to update the pit file:
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Thank you!

Categories

Resources