I was trying to install stock rom on lenovo vibe k5 plus [a6020a46]by twrp bu i ended up deleting the os. Now the phone gets stuck at lenovo logo. I guess its bootloop. I can't access recovery mode either. But my pc can detect{not connect} my phone. I don't care about my data but i want to fix my phone. I know i can flash rom but all tutorials i have seen tells to use recovery mode. Plz help to fix.
Har**** Dhimar said:
I was trying to install stock rom on lenovo vibe k5 plus [a6020a46]by twrp bu i ended up deleting the os. Now the phone gets stuck at lenovo logo. I guess its bootloop. I can't access recovery mode either. But my pc can detect{not connect} my phone. I don't care about my data but i want to fix my phone. I know i can flash rom but all tutorials i have seen tells to use recovery mode. Plz help to fix.
Click to expand...
Click to collapse
You should try to restore stock room by following the appropriate threads.
The other solution is to go into fastboot mode (power and Vol- buttons), plug your phone to the computer, and flash manually TWRP recovery :
Code:
fastboot flash recovery <recovery.img>
fastboot boot recovery <recovery.img>
Sent from my Lenovo Vibe K5 Plus using XDA Labs
Related
I had some issue with twrp and it got stuck on The teamwin screen. So I restore lg os using the lg flash tool. After I update it to lollipo and install autorec d852 lollipop so I can install twrp. It install succesfully. I went on twrp and the problem started. It was stuck on it. I decided to get into fastboot mode by removing download mode ( I have a back up of it) and I did these following commends
Fastboot erase recovery
Fastboot flash recovery cyanogenmod 12.1 recovery for d852..
I flash the cyanogenmod recovery so I could install a aosp. I install cm13 and it damage my micro SD card. I finally fix it . After I flash blisspop because it was limited the customization of cm13 compare to other aosp roms. Once finish setting up everything on my internal storage, I tried flashing again twrp by auto rec ... It didn't work , so I tried flashify but it also got stuck on teamwin screen and I could access anything option. I started looking online if someone had experience something similar but no one had this type of problem that after doing a full reset and reinstalling it, it wouldn't work. So I went on fastboot mdoe ( I don't know how to get download mode back so I stuck in fastboot mode instead of download mode ) and did the previous comments that I did to flash cyanogenmod and I flash the cyanogenmod recovery because I need a working recovery. Since then I have been trying to fix the teamwin screen problem.
I NEED HELP WITH MY 2 PROBLEMS.
-I can't find a way to enter download mode again
- Can't get twrp to work
Someone help me please
Help me guys, i am not able to change recovery in my lenovo k5 a40 2gb, i am using latest twrp by shreps and whatever i do only shreps latest recovery boot other recoveries stuck on lenovo screen. And only 7.x roms boot, 6.0 roms doesn't boot. Help me guys wanted to change recovery to russian or scritch ver and to flash pac rom. All are stuck at lenovo boot screen. And when i flash pac rom only pico gapps successfully flashed other gives error 70.
Remove battery and turn it on with power and vol-
If you reach fastboot, flash Russian recovery via CMD. Remove battery, boot in recovery (power and both volume pressed) and clean all partitions with new recovery, also format data and cache to EXT4 because Russian recovery doesn't support F2FS. Then try installing ROM (I recommend AQSD Lineage)
KiiKeEp said:
Remove battery and turn it on with power and vol-
If you reach fastboot, flash Russian recovery via CMD. Remove battery, boot in recovery (power and both volume pressed) and clean all partitions with new recovery, also format data and cache to EXT4 because Russian recovery doesn't support F2FS. Then try installing ROM (I recommend AQSD Lineage)
Click to expand...
Click to collapse
Sorry bro no luck. Not able to reach fastboot mode after removing battery and connecting with pc. But reach fastboot mode with battery and connect to pc and then remove the battery still in fastboot then flashed scritch r4 recovery but no luck only get lenovo boot screen.
Anyon, guys i cant use this phone without a custom good working rom( prefer mm because of xposed)
Guys please help me i cant wait to tweak with my phone, whatever i do to change recovery or flash pac mm rom it return to lenovo screen, what the heck?
mr.badman said:
Guys please help me i cant wait to tweak with my phone, whatever i do to change recovery or flash pac mm rom it return to lenovo screen, what the heck?
Click to expand...
Click to collapse
Flash Stock Rom first of all with the help of QPST Tool and then flash latest twrp recovery. After that flash pac-rom.
That's it, i am posting as it worked for me.
Stock Rom - http://moto.shreps.fr/?dir=Lenovo Vibe K5 (A6020)/ROM/StockFirmwares
Hope it work for you.
I am using custom ROM Resurrection remix (unofficial)5.8.4 for my device vibe p1. Few days back I tried to go back stock ROM marshmallow using QFIL tool. But my device is not booting into EDL mode. So i was unable to install stock ROM in my device.
Is there any flashable stock ROM is available with Teamwinrecovery(TWRP)? or else How to boot my phone into EDL mode to install Stock version ROM which is came with phone when i bought it.
sampath.mende said:
I am using custom ROM Resurrection remix (unofficial)5.8.4 for my device vibe p1. Few days back I tried to go back stock ROM marshmallow using QFIL tool. But my device is not booting into EDL mode. So i was unable to install stock ROM in my device.
Is there any flashable stock ROM is available with Teamwinrecovery(TWRP)? or else How to boot my phone into EDL mode to install Stock version ROM which is came with phone when i bought it.
Click to expand...
Click to collapse
Adb reboot edl command
where to use this and when to use it? First thing is device is not switching off and it always restarts when click on power button. If i press power button and volume +/- it boots to recovery mode. So when i use this command?
i dont think led notification fix available in any custom rom in near future.
In call mic low volume fix also.
Thread moved to proper forum.
https://drive.google.com/file/d/0B7ddXYAPBvIIdTVLTTBIZVRqM0U/view
I found that in Facebook group of Vibe P1 users in Vietnam .
did u solve this problem plz
i have same problem i cant go back to stock rom with qfil app no port appear for me to flash the stock
At first I flashed Nougat chines rom from stock marshmallow rom which is also chines rom.
But i did this after unlocking the bootloader and TWRP flashing.
Then my phone was start and i gave factory reset from settings menu
After that phone is not open
The led notification is come and also the ZUK logo come but disappear immediately
What is the solution ?
csemasud said:
At first I flashed Nougat chines rom from stock marshmallow rom which is also chines rom.
But i did this after unlocking the bootloader and TWRP flashing.
Then my phone was start and i gave factory reset from settings menu
After that phone is not open
The led notification is come and also the ZUK logo come but disappear immediately
What is the solution ?
Click to expand...
Click to collapse
Press the power button until it vibrates and reboots. Reboot into recovery. This ll take you to TWRP.
Now Wipe -> Advanced Wipe -> Wipe Cache, Dalvick Cache, System, Data.
Download any stable nougat rom like AEX 4.6, DOT OS Latest, Viper 3.1.1 and transfer it to OTG pen drive and connect the OTG drive to the phone and install the ROM of your choice by selecting the storage as OTG and reboot to system after flashing.
Your phone should boot normally now.
Try this and update if it worked.
I can't enter into recovery mode
either stock recovery or TWRP
csemasud said:
I can't enter into recovery mode
either stock recovery or TWRP
Click to expand...
Click to collapse
Flashing Stock Nougat may have relocked the bootloader.
Unlock the bootloader again and flash the latest TWRP 3.2.1 in fastboot mode.
when i connected through PC by Adb sideload it's show no device found in command promt
try 9008
csemasud said:
when i connected through PC by Adb sideload it's show no device found in command promt
Click to expand...
Click to collapse
Try mi flash method, the i dont know much about this but you can search on xda
This one works 100%
https://forum.xda-developers.com/le...-to-recover-hard-bricked-zuk-z2-plus-t3576007
had exactly the same problem and my phone works now with this
I have unbeicked my device yesterday with MI flash, ask me if you run into problems
I have a spare Le1s with me so wanted to play around with it for my tiny project, using Le1s as universal remote with Alexa/Echo (using Anymote Skills).
I flashed LineageOS ROM and GAPPS, it booted fine.
Then i tried to flash TWRP using adb. Since then it is on continuous Recovery Boot Loop. It switches On to Stock recovery screen and switches off within seconds and then switches back on.
So I am not able to ADB or use SP Flash tool to flash again.
Tried hard reset also, nothing is working. Vol+ Vol- Power also not working.
So it is lying on my side table going ON and OFF in recovery screen
Any advise, please share.
Thanks.
Flash stock firmware through sp flash tool...search in xda
Device needs to be detected to use SP flash tool. As i mentioned it is in loop automatically switching On and Off in recovery.
Kaps said:
Device needs to be detected to use SP flash tool. As i mentioned it is in loop automatically switching On and Off in recovery.
Click to expand...
Click to collapse
Open device in recovery mode when it switched off ... And then format data in wipe by typing yes .... Then flash rom u want ... ?
Well the question is how ?
Device is not switching off and not staying in recovery its goes On and Off in a loop.
Try to open other modes .... Fastboot ...if it stays flash new twrp ..... And if it boots again into recovery then may be it's a hardware issue your power button may be stuck