Develop Bugs

[GUIDE][SS/DS]Deodexing Stock ROM Xperia M[12/17/2013]

Flashable zip and adb push tool for Deodexing Xperia M
ODEX vs DEODEXED ROM
Short version:
deodexing a ROM opens up full customization oppurtunities. (themers will understand)
Long Version:
check this thread --- > http://www.redmondpie.com/odexed-vs-deodexed-the-difference-between-the-two-android-roms-explained/
Tools i used:
Android Kitchen! a very user friendly tool.! i used it in ubuntu.
http://forum.xda-developers.com/showthread.php?t=633246
What I did:
For 4.1.2
deodex all apks in:
/system/app/ (41 apks)
deodex all jars in:
/system/framework/ (33 jars)
For 4.2
deodex all apks in:
/system/app/ (50 apks)
deodex all jars in:
/system/framework/ (39 jars)
Installation:
-- Make sure u have busybox installed.
-- Download and the flash the file in recovery.
-- Refer post #28 if u get any errors while flashing
post 28
OR
If you dont have unlocked bootloader use adb method
-- Make sure u have busybox installed.
-- Download the required firmware and tool zip and extract it
-- extract such that both system folder from firmware zip and tool folder from tool zip are present in the same directory ( check screenshot)
-- connect phone to pc and enable usb debugging
-- run push.bat in tool folder
reboot once.
this will replace all deodexed files with present ones and remove all .odex files
Tested on pure stock .
Note:
deodexing 4.1 works perfectly.!
however, 4.2 zips may cause bootloops, this is not a problem with the zips but with the improper rooting procedure of 4.2. so folow this guide to FULL root 4.2 ROM first. and then flash the deodex zip.
Refer Post
Download links:
for 4.1.2 (15.1.C.17)
Download
for 4.1.2 (15.1.C.2.8) (by @pavaczek)
Download
for 4.2 (15.2.A.1.12)
Download
for 4.2 (15.2.A.2.5)
Download
Mirrors

Another Method For All Bootloader
I want to share this work of Noel Macwan he made the ADB Push tool And he took deodex files from Ram Prasad (OP)
Click Here to know more !! And Download !

jereMarfil24 said:
I want to share this work of Noel Macwan he made the ADB Push tool And he took deodex files from Ram Prasad (OP)
Click Here to know more !! And Download !
Click to expand...
Click to collapse
the adb push tool does only the adb commands which I posted. in case u dint know that.. the tool is just for new ppl who don't understand adb commands.
Sent from my C1904 using xda app-developers app

post updated with 4.2 deodexed files..

post updated with. new 4.1.2 firmware(15.1.C.2.8) deodexed files.

deodex files for 15.1.C.2.8 are ok, i tested it and all ok

Not working for me, it says installation aborted in recovery
C1904 15.1.C.2.8

durveshthorve433 said:
Not working for me, it says installation aborted in recovery
C1904 15.1.C.2.8
Click to expand...
Click to collapse
works for me. :\ even i have c1904

Count me too..I have updated the last firmware and followed the instructions above and voila !
I hit Thanks button many times man thank you very much ramprasad5394

CuriousPhysicist said:
Count me too..I have updated the last firmware and followed the instructions above and voila !
I hit Thanks button many times man thank you very much ramprasad5394
Click to expand...
Click to collapse
i pass the files for dual sim and it give me bootloop

nasios said:
i pass the files for dual sim and it give me bootloop
Click to expand...
Click to collapse
which firmware are you running?
which zip did u flash?
did you deodex the ROM before flashing the zip?

ramprasad5394 said:
which firmware are you running?
which zip did u flash?
did you deodex the ROM before flashing the zip?
Click to expand...
Click to collapse
4.2 firmware 15.1.A.2.5
unlocked bootloader
busybox instaled
rooted ....flash it via recovery ,,,
bootloop......

nasios said:
4.2 firmware 15.1.A.2.5
unlocked bootloader
busybox instaled
rooted ....flash it via recovery ,,,
bootloop......
Click to expand...
Click to collapse
deodexed?

ramprasad5394 said:
deodexed?
Click to expand...
Click to collapse
isnt that supossed to be done with this file ?if not i m sorry

nasios said:
isnt that supossed to be done with this file ?if not i m sorry
Click to expand...
Click to collapse
replied to the wrong thread man! sorry!
i tested it on my device and only then uploaded. dont know whats wrong.

ramprasad5394 said:
replied to the wrong thread man! sorry!
i tested it on my device and only then uploaded. dont know whats wrong.
Click to expand...
Click to collapse
The link is not working.can u please upload to a different website.
Sent from my C2004 using Tapatalk 2

Just downloaded it and thanks...
Sent from my Xperia M Dual C2004 using Tapatalk 4 Premium

Hi
I get bootloop after installing 4.2.2 package with tool!
C2005
BUILD 2.5
NONE DEODEXED

hamid-sp3 said:
Hi
I get bootloop after installing 4.2.2 package with tool!
Click to expand...
Click to collapse
what error did u get in the tool?
EDIT: try removing the line 'adb shell su -c stop' from the push.bat file and then run the tool.
tell me if u get any single error.. with a screenshot if possible

okay guys. clarify something for me.
are 15.1.A.2.5 and 15.2.A.2.5 two different versions of dual firmware? or is it just a typo ?

[APP][ROOT][Camera APK][XZ Series] Ultimate Unlocked Camera with Full Manual Controls

....:::: Finally Its Here ::::....
First Time Ever for XZ series users
Introducing
Manual Focus
&
Manual Shutter Speed
Modified SEMCCameraUI.APK from XZ Stock Firmware [vF8332_39.0.A.1.250]
With Unlocked All Options, Intelligent Active Everywhere,
Scenes, ISOs and So on...​
Download Links :
Go to this thread , download the attached APK
Important Notice:
Use the APK as-is , copy it to the exact location of the existing camera apk and delete the old one. Set permission to 644. So you need root access for sure.
Please do not steal my work, Always ask for permission via PM and give credits accordingly ​
Credits:
I am forever grateful to the creators of the APKTOOL & Advance APKTOOL

Error camera is in use
Thanks for the mod. Installed it on my xz. Unfortunately I get the error message "camera is in use by another application try again later" .Set the permissions, deleted cache and data from the camera app ..still the same any idea?
Best

ojessie said:
Thanks for the mod. Installed it on my xz. Unfortunately I get the error message "camera is in use by another application try again later" .Set the permissions, deleted cache and data from the camera app ..still the same any idea?
Best
Click to expand...
Click to collapse
You need patched services.jar (superuser mod) and root of course

All seems to be working here ?
Running RomAur 1.1 just installed latest apk directly.
Sent from my F8331 using Tapatalk

Thanx a lot for that mod. It works perfectly?
For people using RomAur Rom: just install the app. No replacing needed with the SemcCamera apk with root browser.

Will this camera work too under these conditions: unlocked bootloader, twrp and androplus-kernel-v04 flashed. No custom ROM installed till now.
Is a parallel install, existing old camera and the new camera from here possible?

​
paulle said:
Will this camera work too under these conditions: unlocked bootloader, twrp and androplus-kernel-v04 flashed. No custom ROM installed till now.
Is a parallel install, existing old camera and the new camera from here possible?
Click to expand...
Click to collapse
Yes it worked for me f8332

karrouma said:
​
Yes it worked for me f8332
Click to expand...
Click to collapse
Did you have to delete the original camera or have the original camera and this one here working side by side?

paulle said:
Did you have to delete the original camera or have the original camera and this one here working side by side?
Click to expand...
Click to collapse
Replace it by any file manager, and give it thr right permission.
Do a backup for original camera app

karrouma said:
Replace it by any file manager, and give it thr right permission.
Do a backup for original camera app
Click to expand...
Click to collapse
first try wasn't successful, but weekend I will be at home (and having a little bit more time) will try it again. Thanks for your advices.

Could someone include some pictures ? (For Comparison)

What is the path where you have to copy the apk from the camera?

It gives an error "another app is using it try again later"

Mangtas_666 said:
It gives an error "another app is using it try again later"
Click to expand...
Click to collapse
Because you'll need xposed and superuser mode installed.

Mangtas_666 said:
It gives an error "another app is using it try again later"
Click to expand...
Click to collapse
I am rooted and xposed installed.. What module should i install to get it working? And i havent read it in the op thats telling xposed is needed.
---------- Post added at 01:42 AM ---------- Previous post was at 01:41 AM ----------
nolihowell said:
Because you'll need xposed and superuser mode installed.
Click to expand...
Click to collapse
What module should i install?

Mangtas_666 said:
I am rooted and xposed installed.. What module should i install to get it working? And i havent read it in the op thats telling xposed is needed.
---------- Post added at 01:42 AM ---------- Previous post was at 01:41 AM ----------
What module should i install?
Click to expand...
Click to collapse
The module is called superuser mode

nolihowell said:
Because you'll need xposed and superuser mode installed.
Click to expand...
Click to collapse
Is xposed framework required on this mod?

nolihowell said:
The module is called superuser mode
Click to expand...
Click to collapse
I don't see any superuser mode module in xposed. Can you post the link please. All i know is superuser for aquiring root.

Mangtas_666 said:
I don't see any superuser mode module in xposed. Can you post the link please. All i know is superuser for aquiring root.
Click to expand...
Click to collapse
http://forum.xda-developers.com/crossdevice-dev/sony/xposed-super-user-mode-x-v1-0-0-t3383183/page6

nolihowell said:
http://forum.xda-developers.com/crossdevice-dev/sony/xposed-super-user-mode-x-v1-0-0-t3383183/page6
Click to expand...
Click to collapse
So activate the super usee mode before installing this camera mod?

Working Dolby atmos on OOS 5.1.1

Have anyone succeeded in installing Dolby Atmos on OOS 5.1.1?? I tried but in vain...is there any successful workaround for that?? I'm on OOS5.1.1 with magisk.Please help

Flash through recovery.And on 5.1.1 stable and beta 7 works great.

altai1963 said:
Flash through recovery.And on 5.1.1 stable and beta 7 works great.
Click to expand...
Click to collapse
Thank you ?? This is working.But the interface is looking old? Ofcourse im fine with it though.... Thanks once again ?

murali0007 said:
Thank you This is working.But the interface is looking old? Ofcourse im fine with it though.... Thanks once again
Click to expand...
Click to collapse
Good, happiness and love!!!
---------- Post added at 07:51 PM ---------- Previous post was at 06:57 PM ----------
murali0007 said:
Thank you This is working.But the interface is looking old? Ofcourse im fine with it though.... Thanks once again
Click to expand...
Click to collapse
Here's a new version and a new interface! Remove the old one through magisk! https://mega.nz/#!uRYxVZoK!Rgj7I0qkFf6LkLgzoHIieF1jdn9EVOIoTpg434Z2DJQ

altai1963 said:
Good, happiness and love!!!
---------- Post added at 07:51 PM ---------- Previous post was at 06:57 PM ----------
Here's a new version and a new interface! Remove the old one through magisk! https://mega.nz/#!uRYxVZoK
Click to expand...
Click to collapse
Its asking for a decryption key. what is it? and also, this is a magisk module right? so if something goes wrong we just have to delete the module from magisk?

murali0007 said:
Thank you This is working.But the interface is looking old? Ofcourse im fine with it though.... Thanks once again
Click to expand...
Click to collapse
akhilarora666 said:
Its asking for a decryption key. what is it? and also, this is a magisk module right? so if something goes wrong we just have to delete the module from magisk?
Click to expand...
Click to collapse
Removed the encryption key. Just remove magisk in the old version. And sew a new one. There is nothing terrible!!!

altai1963 said:
Removed the encryption key. Just remove magisk in the old version. And sew a new one. There is nothing terrible!!!
Click to expand...
Click to collapse
i tried the older version. its not working on stock 5.1.1
and now im stuck how do i remove the old version? should i just install the new version over it?

altai1963 said:
Removed the encryption key. Just remove magisk in the old version. And sew a new one. There is nothing terrible!!!
Click to expand...
Click to collapse
Can you remove the decryption key for me too?

Working!!! ??
altai1963 said:
Good, happiness and love!!!
---------- Post added at 07:51 PM ---------- Previous post was at 06:57 PM ----------
Here's a new version and a new interface! Remove the old one through magisk! https://mega.nz/#!uRYxVZoK!Rgj7I0qkFf6LkLgzoHIieF1jdn9EVOIoTpg434Z2DJQ
Click to expand...
Click to collapse
Thanx again man! ? But it used to force stop until I removed the old prop file and reflash again. I think jus removing older version won't do the job.. Prop file in root folder must be deleted manually and then this version be installed.

murali0007 said:
Thanx again man! But it used to force stop until I removed the old prop file and reflash again. I think jus removing older version won't do the job.. Prop file in root folder must be deleted manually and then this version be installed.
Click to expand...
Click to collapse
It's possible in more detail please what you specifically did? Thanks in advance

artem342 said:
It's possible in more detail please what you specifically did? Thanks in advance
Click to expand...
Click to collapse
I first installed the older version.When you again gave me a new version, I downloaded it and installed as you instructed(remove the old dolby through magisk and install new one in it's place) but dolby crashed everytime I tried opening it.Then I removed the arise.prop file present in the root folder,removed dolby and reflashed it again... Then everything z working fine.
I think .prop file too needs to be deleted if we are installing on a previous version.

deleted

ANyone tried divine beats on oos5.1.1?

altai1963 said:
Good, happiness and love!!!
---------- Post added at 07:51 PM ---------- Previous post was at 06:57 PM ----------
Here's a new version and a new interface! Remove the old one through magisk! https://mega.nz/#!uRYxVZoK!Rgj7I0qkFf6LkLgzoHIieF1jdn9EVOIoTpg434Z2DJQ
Click to expand...
Click to collapse
Tried to add this in magisk but didn't work how do i install this please help

Clear instructions for installation
Dragonlord07 said:
Tried to add this in magisk but didn't work how do i install this please help
Click to expand...
Click to collapse
IF U HAVE DOLBY INSTALLED:
1)First delete the "ARISE. PROP" file present in the root folder.
2)Flash this zip in recovery(it's magisk recovery module that mounts magisk folder and helps you delete dolby from recovery)
View attachment Magisk+SuperSU_RecoveryManagement.zip
3)Head to advanced section of twrp,go to File manager and open magisk folder.you will find a dolby folder there.DELETE the folder.
4)Reboot to system once and again to recovery later.
5)Then flash the zip(dolby atmos for oreo) downloaded from below link.
https://mega.nz/#!uRYxVZoK!Rgj7I0qkFf6LkLgzoHIieF1jdn9EVOIoTpg434Z2DJQ
6)Clear cache and reboot.Voila!
You will have a working latest dolby atmos module.
IF THERE'S NO DOLBY INSTALLED
1)Just reboot to recovery and flash the zip file
2)Clear cache and reboot
That's it.Done!Just make sure that you dont have any .prop file in the root folder before installation.Hope this helps you.Have a good day!

akhilarora666 said:
i tried the older version. its not working on stock 5.1.1
and now im stuck how do i remove the old version? should i just install the new version over it?
Click to expand...
Click to collapse
IF U HAVE DOLBY INSTALLED:
1)First delete the "ARISE. PROP" file present in the root folder.
2)Flash this zip in recovery(it's magisk recovery module that mounts magisk folder and helps you delete dolby from recovery)
View attachment Magisk+SuperSU_RecoveryManagement.zip
3)Head to advanced section of twrp,go to File manager and open magisk folder.you will find a dolby folder there.DELETE the folder.
4)Reboot to system once and again to recovery later.
5)Then flash the zip(dolby atmos for oreo) downloaded from below link.
https://mega.nz/#!uRYxVZoK!Rgj7I0qkF...OIoTpg434Z2DJQ
6)Clear cache and reboot.Voila!
You will have a working latest dolby atmos module.
IF THERE'S NO DOLBY INSTALLED
1)Just reboot to recovery and flash the zip file
2)Clear cache and reboot
That's it.Done!Just make sure that you dont have any .prop file in the root folder before installation.Hope this helps you.Have a good day!

murali0007 said:
IF U HAVE DOLBY INSTALLED:
1)First delete the "ARISE. PROP" file present in the root folder.
2)Flash this zip in recovery(it's magisk recovery module that mounts magisk folder and helps you delete dolby from recovery)
View attachment 4491865
3)Head to advanced section of twrp,go to File manager and open magisk folder.you will find a dolby folder there.DELETE the folder.
4)Reboot to system once and again to recovery later.
5)Then flash the zip(dolby atmos for oreo) downloaded from below link.
6)Clear cache and reboot.Voila!
You will have a working latest dolby atmos module.
IF THERE'S NO DOLBY INSTALLED
1)Just reboot to recovery and flash the zip file
2)Clear cache and reboot
That's it.Done!Just make sure that you dont have any .prop file in the root folder before installation.Hope this helps you.Have a good day!
Click to expand...
Click to collapse
How to install ViperFX together with Dolby Atmos? Write the instruction please)

artem342 said:
How to install ViperFX together with Dolby Atmos? Write the instruction please)
Click to expand...
Click to collapse
I think, currently viper is conflicting with any other sound mod installed.I tried many versions but nothing worked.I think we should settle with either of these if on stock OOS, atleast for now

You'll should try the versions available on magisk. It is completely systemless and can be removed if it does not work.

Bootloop on brand new (w/ full wipe) on Beta 7

FM Radio Magisk module

Test version (I don't own this device).
Flash in Magisk Manager.
This module sets selinux to permissive.
Only for stock ROM.
https://1drv.ms/u/s!AnNVEh3KeCSVj-IKOvQ_qpynrgRtwg

Any possibility to have FM radio app working without root? For example adb flashable zip..

Sorry, can u explaint more about it... thanks alot !!!

assal said:
Sorry, can u explaint more about it... thanks alot !!!
Click to expand...
Click to collapse
If you have Magisk installed flash it thru the Magisk app.

cheeze.keyk said:
If you have Magisk installed flash it thru the Magisk app.
Click to expand...
Click to collapse
Thanks but is it needed a radio app? or the module inclusive it?

assal said:
Thanks but is it needed a radio app? or the module inclusive it?
Click to expand...
Click to collapse
It's already included.

Thanks to @ture71 for providing files and testing.
Last ROM version:
https://1drv.ms/u/s!AnNVEh3KeCSVj-IMmFn70SaUDCEb8g

I installed this module.After installing this module, I have the video stretched to full screen.removed this module, everything became normal.what is the problem?sorry for english

install this apk https://drive.google.com/file/d/0B4sAcI5G6CpxNXFTZm9nSGhIdWM/view, you need root access and the headphones plugged in.

If using a treble gsi rom installing this module will lead in a bootloop! Tried with RR and Omni!

Voodoojonny said:
If using a treble gsi rom installing this module will lead in a bootloop! Tried with RR and Omni!
Click to expand...
Click to collapse
This module is only for stock ROM.

sipollo said:
This module is only for stock ROM.
Click to expand...
Click to collapse
Perhaps you can write it in op...

Ok, tried on stock! It works, but not recommending. This one creates different problems:
1. Random reboots - mostly when using an app which needs full screen
2. Picture in fullscreen not centered on screen - on top some info missing...
Disabling module fixes the problems

Voodoojonny said:
Ok, tried on stock! It works, but not recommending. This one creates different problems:
1. Random reboots - mostly when using an app which needs full screen
2. Picture in fullscreen not centered on screen - on top some info missing...
Disabling module fixes the problems
Click to expand...
Click to collapse
I don't own this device. If you upload your services.jar (disable module first) I can try to make a more compatible version. Copy file from adb with /system mounted as read-only.

Voodoojonny said:
Ok, tried on stock! It works, but not recommending. This one creates different problems:
1. Random reboots - mostly when using an app which needs full screen
2. Picture in fullscreen not centered on screen - on top some info missing...
Disabling module fixes the problems
Click to expand...
Click to collapse
This module works sure with last firmware and September OTA update....check firmware and OTA.....

Mi A2 Lite (daisy).
Does anyone know which magisk module "Dolby Atmos Oreo" works on MI A2?
These files (links) does not work, cause infinite loop. And you will have to uninstall the magisk to resolve and then just install the magisk again.
https://forum.xda-developers.com/android/software/app-dolby-atmos-axon-7-oreo-port-t3740508
https://androidfilehost.com/?fid=673956719939820999
http://prntscr.com/l77tt8
https://zackptg5.com/android.php#aml
https://zackptg5.com/downloads/Audio-Modification-Library_v1.8.1.zip
https://zackptg5.com/downloads/Dolby-Atmos-Axon7-Oreo_09.20.2018.zip

sipollo said:
I don't own this device. If you upload your services.jar (disable module first) I can try to make a more compatible version. Copy file from adb with /system mounted as read-only.
Click to expand...
Click to collapse
Hey that sounds great. I uploaded the services.jar via gdrive
Really aprreciate your engagement! Thank you!
---------- Post added at 03:21 PM ---------- Previous post was at 03:20 PM ----------
ture71 said:
This module works sure with last firmware and September OTA update....check firmware and OTA.....
Click to expand...
Click to collapse
Yes it works, as I said... But creates problems... I´m on sept. ota...

Voodoojonny said:
Hey that sounds great. I uploaded the services.jar via gdrive
Click to expand...
Click to collapse
Try this and let me know if it works:
https://1drv.ms/u/s!AnNVEh3KeCSVj-IMmFn70SaUDCEb8g

sipollo said:
Try this and let me know if it works:
https://1drv.ms/u/s!AnNVEh3KeCSVj-IMmFn70SaUDCEb8g
Click to expand...
Click to collapse
Works and all problems solved! Thank you very much!

Missing RDS
sipollo said:
Try this and let me know if it works:
https://1drv.ms/u/s!AnNVEh3KeCSVj-IMmFn70SaUDCEb8g
Click to expand...
Click to collapse
Thank you, it seems to work well.
But it hasn't RDS support (to show station's names)
Is there a way to enable RDS?

Fixed Viper4Android for MI A2 Lite

Hey guys! I created a Viper4Android version that doesn't breaks WIFI and/or Camera.
Other V4A versions needs to be uninstalled.
Link: https://drive google.com/open?id=1NCSuF9LH4XkZKSeFdYDo1Xh05Rb05Jxm
Jusp put the dot on the "drive google"
Install the zip as a Magisk Module

Gustavo_Jadson said:
Hey guys! I created a Viper4Android version that doesn't breaks WIFI and/or Camera.
Other V4A versions needs to be uninstalled.
Link: https://drive google.com/open?id=1NCSuF9LH4XkZKSeFdYDo1Xh05Rb05Jxm
Jusp put the dot on the "drive google"
Click to expand...
Click to collapse
Thanks, unfortunately it's not possible to install it. It's stuck at "patching existing audio effects files" in TWRP.

Veran125 said:
Thanks, unfortunately it's not possible to install it. It's stuck at "patching existing audio effects files" in TWRP.
Click to expand...
Click to collapse
This is a Magik Module, not a flashable zip.

Gustavo_Jadson said:
This is a Magik Module, not a flashable zip.
Click to expand...
Click to collapse
Magisk Manager shuts down every time I want to add a module. I can only add the ones that you can download in the app.

Veran125 said:
Magisk Manager shuts down every time I want to add a module. I can only add the ones that you can download in the app.
Click to expand...
Click to collapse
Is the Magisk updated? Try to reinstall it or download it from official thread.

Gustavo_Jadson said:
Is the Magisk updated? Try to reinstall it or download it from official thread.
Click to expand...
Click to collapse
I needed a file manager(apart from the google one), that was the reason, so it was my bad. But now it works, thanks a lot. Any particular reason why you haven't used the rewritten version of V4A(2.7.0.1)?

Don't need it, got hardware Snapdragon audio + working on mi a2 lite

Veran125 said:
Magisk Manager shuts down every time I want to add a module. I can only add the ones that you can download in the app.
Click to expand...
Click to collapse
Have you enabled storage for magisk? That would cause a force close if it don't have permission

boe323 said:
Don't need it, got hardware Snapdragon audio + working on mi a2 lite
Click to expand...
Click to collapse
Give me link guy

Gustavo_Jadson said:
Hey guys! I created a Viper4Android version that doesn't breaks WIFI and/or Camera.
Other V4A versions needs to be uninstalled.
Link: https://drive google.com/open?id=1NCSuF9LH4XkZKSeFdYDo1Xh05Rb05Jxm
Jusp put the dot on the "drive google"
Install the zip as a Magisk Module
Click to expand...
Click to collapse
Great work. Are you planning to make the same module with the latest version of V4A?

Does this works for custom roms? Cause i've got bootloop when install it. I'm using crDroid rom

Jebreto08 said:
Does this works for custom roms? Cause i've got bootloop when install it. I'm using crDroid rom
Click to expand...
Click to collapse
Yes, it works

Google play protect says viper4android tried to bypass android security system. Uninstalled because of this.

well, v4a installs different libraries and drivers for the phone, ofc. google security is complaining about.
i mean it's like you try to install non certified drivers on your windows 10 pc, it won't let you do it unless u deactivated the security feature for it.

Running on AOSIP with DragonHeart kernel. There was no need to install audio library or audio patch. WiFi, Cameringo and MGCcam work correctly. Thank you.

dt2w is not working anymore after flashing it with magisk.

Gustavo_Jadson said:
Hey guys! I created a Viper4Android version that doesn't breaks WIFI and/or Camera.
Other V4A versions needs to be uninstalled.
Link: https://drive google.com/open?id=1NCSuF9LH4XkZKSeFdYDo1Xh05Rb05Jxm
Jusp put the dot on the "drive google"
Install the zip as a Magisk Module
Click to expand...
Click to collapse
I've just installed this module from Magisk menu, it installed correctly but no app on menu after restart, module appears on Magisk modules but no GUI app.
---------- Post added at 07:38 PM ---------- Previous post was at 07:31 PM ----------
Gustavo_Jadson said:
Hey guys! I created a Viper4Android version that doesn't breaks WIFI and/or Camera.
Other V4A versions needs to be uninstalled.
Link: https://drive google.com/open?id=1NCSuF9LH4XkZKSeFdYDo1Xh05Rb05Jxm
Jusp put the dot on the "drive google"
Install the zip as a Magisk Module
Click to expand...
Click to collapse
I've just installed this module from Magisk menu, it installed correctly but no app on menu after restart, module appears on Magisk modules but no GUI app.

boe323 said:
Don't need it, got hardware Snapdragon audio + working on mi a2 lite
Click to expand...
Click to collapse
Bro, can you link me up?