Hello,
I tried to flash Oreo but Odin showed PASS after 4 seconds and when my A5 2017 (German model) rebooted, the IMEI, IMEISV, Bluetooth address etc. became unknown.
I've already flashed Nougat Russian rom and then Nougat German rom without any problems. No root.
Does anyone know a way to fix the IMEI?
Btw: I still have the sticker with the IMEI.
Did you flash BL, AP, CP and CSC or just AP?
I flashed all four.
wipe data from recovery and then flash the original firmware that came with your device but choose the bootloader that u are using now , if your carrent firmware is U2 flash the U2 bootloader but everything else from the firmware that came with your device ... then try again
Try with SmartSwitch should fix problem.
Thanks for your answers, but I already fixed it by wiping data, flashing the original German firmware and doing the same with the Oreo one afterwards!
Hello
The problem is simple
The problem is in Odin
Download the latest version Odin3_v3.13.1
That is available on the SS_DL.dll file:fingers-crossed:
rouji said:
Hello
The problem is simple
The problem is in Odin
Download the latest version Odin3_v3.13.1
That is available on the SS_DL.dll file:fingers-crossed:
Click to expand...
Click to collapse
Yes, had that problem too, took me a little bit to get it ?
Installing the newest Odin 3.13.1 works perfect .
rouji said:
Hello
The problem is simple
The problem is in Odin
Download the latest version Odin3_v3.13.1
That is available on the SS_DL.dll file:fingers-crossed:
Click to expand...
Click to collapse
Thanks Rouji... same problem here in Brazil! :crying:
But, I restart the process with this version of Odin anda all works fine!!
:good::good:
Hey, quick question, does flashing the russian fw trip knox?
doenen said:
Hey, quick question, does flashing the russian fw trip knox?
Click to expand...
Click to collapse
On my German device no, but I don't know if tripping knox depends on the firmware country.
doenen said:
Hey, quick question, does flashing the russian fw trip knox?
Click to expand...
Click to collapse
No.
doenen said:
Hey, quick question, does flashing the russian fw trip knox?
Click to expand...
Click to collapse
No, Knox is only tripped when you modify the bootloader.
Thank you very much! I was really confused already!
Can someone give me an backup of the efs partiton with twrp of a520f please?
Related
Hi
Is it possible to flash the new I9195XXUBMJ7 Firmware without the Knox bootloader? How do i remove the bootloader from stock firmware or how to flash stock I9195XXUBMJ7 rom without the bootloader. Has anyone tried it?
Kind Regards
Tom
is possible, you can try with [TOOL] TAR.MD5 PACKAGER from this link
http://forum.xda-developers.com/showpost.php?p=42393470&postcount=2
modem image
I have CM10.2 installed and I want to keep it. But I want to update the modem while keeping the bootloader.
Is this possible with this phone?
I am not skilled enough to extract the related files and create a new CWM flashable ZIP.
Could somebody please do this for me (and possibly others)?
equatorius said:
I have CM10.2 installed and I want to keep it. But I want to update the modem while keeping the bootloader.
Is this possible with this phone?
I am not skilled enough to extract the related files and create a new CWM flashable ZIP.
Could somebody please do this for me (and possibly others)?
Click to expand...
Click to collapse
You need to extract from latest Firmware.TAR.MD5 only the NON-HLOS.bin file, repack it and flash as CP/PHONE via Odin.
Needed commands for repack (in Linux or Cygwin):
Code:
tar -H ustar -c NON-HLOS.bin > modem.tar
md5sum -t modem.tar >> modem.tar
mv modem.tar modem.tar.md5
Finally you take the modem.tar.md5 and flash it.
ladislav.heller said:
You need to extract from latest Firmware...
Click to expand...
Click to collapse
Thank you.
I successfully flashed the tar file with ODIN. The phone rebooted and runs without noticeable problems.
But my baseband version status line still shows UAMG8. Shouldn't it read UBMJ7?
equatorius said:
Thank you.
I successfully flashed the tar file with ODIN. The phone rebooted and runs without noticeable problems.
But my baseband version status line still shows UAMG8. Shouldn't it read UBMJ7?
Click to expand...
Click to collapse
For me it is exactly the same...after flashing baseband version in system settings is still the same...no change
equatorius said:
Thank you.
I successfully flashed the tar file with ODIN. The phone rebooted and runs without noticeable problems.
But my baseband version status line still shows UAMG8. Shouldn't it read UBMJ7?
Click to expand...
Click to collapse
ZockyMcZock said:
For me it is exactly the same...after flashing baseband version in system settings is still the same...no change
Click to expand...
Click to collapse
Guys, from which firmware you extracted the NON-HLOS.bin file?
I9195xxubmj7_i9195oxabmj7_dbt
ZockyMcZock said:
I9195xxubmj7_i9195oxabmj7_dbt
Click to expand...
Click to collapse
OK, let's try again Odin, but this time flash it via PDA/AP button.
ladislav.heller said:
OK, let's try again Odin, but this time flash it via PDA/AP button.
Click to expand...
Click to collapse
Tried it...but i am still on baseband version XXUAMG8 and not XXUBMJ7....more suggestions?
ZockyMcZock said:
Tried it...but i am still on baseband version XXUAMG8 and not XXUBMJ7....more suggestions?
Click to expand...
Click to collapse
Where/how did you check the baseband version?
Try the following code in dialer: *#1234#
Still MG8 ?
hm...something must be wrong with my phone...when i enter your ussd code in the dialer app i get an error "connection problem or invalid mmi-code"
ZockyMcZock said:
hm...something must be wrong with my phone...when i enter your ussd code in the dialer app i get an error "connection problem or invalid mmi-code"
Click to expand...
Click to collapse
Power off the device. Remove battery. Wait a while. Insert battery. Power on. Check again. Optionally reflash again the modem in Odin.
ladislav.heller said:
Where/how did you check the baseband version?
Try the following code in dialer: *#1234#
Still MG8 ?
Click to expand...
Click to collapse
Do you come from Not Official Samsung Firmware Status Coustom ??!!! You must flash first AMG8 or AMH3 Official Firmware.....otherwise the modem will still.
1. Factory Reset
2. AMG8 Firmware Flash by Odin
3. Boot + OTA Update to XXUBMJ7
or
Flash with Odin.
Thats my way with the same Problem.
Sorry for my bad english.
I`m on CM 10.2, so no OTA possible. Moreover i don`t want KNOX on my phone.
---------- Post added at 05:10 PM ---------- Previous post was at 05:02 PM ----------
ladislav.heller said:
Power off the device. Remove battery. Wait a while. Insert battery. Power on. Check again. Optionally reflash again the modem in Odin.
Click to expand...
Click to collapse
i did as you've said, but ussd code is still not working. I really don't know whats wrong.
ZockyMcZock said:
I`m on CM 10.2, so no OTA possible. Moreover i don`t want KNOX on my phone.
Click to expand...
Click to collapse
XXUBMJ7 Modem = KNOX
XXUBMJ7 Firmware without XXUBMJ7 Modem = No Knox = No wifi
XXUBMJ7 Firmware with XXUBMJ7 Modem = Knox = Wifi
this is my observation......
cheech01 said:
XXUBMJ7 Modem = KNOX
XXUBMJ7 Firmware without XXUBMJ7 Modem = No Knox = No wifi
XXUBMJ7 Firmware with XXUBMJ7 Modem = Knox = Wifi
this is my observation......
Click to expand...
Click to collapse
Before i knew that with XXUBMJ7 also KNOX comes along i've already flashed the whole firmware package. Everthing worked fine, but baseband didn't changed. I also don't have KNOX on my phone, so i think your observation is right. Nevertheless i want to reflash modem to a newer version (it don't hast to be XXUBMJ7) because i have strange reception and wifi connections errors since i change to cm 10.2 (from stock),
I've tried it again with I9195XXUAMH1_I9195OXXAMH3_BTU modem...but baseband is still the same
cheech01 said:
XXUBMJ7 Modem = KNOX
XXUBMJ7 Firmware without XXUBMJ7 Modem = No Knox = No wifi
XXUBMJ7 Firmware with XXUBMJ7 Modem = Knox = Wifi
this is my observation......
Click to expand...
Click to collapse
Are you sure?
I think XXUBMJ7 firmware has the Knox part in BOOTLOADER, not in MODEM.
So XXUBMJ7 + MODEM - bootloader = no Knox
Of course I can not confirm, because I am now on XXUBMJ7 and return to older FW is not possible.
ladislav.heller said:
Are you sure?
I think XXUBMJ7 firmware has the Knox part in BOOTLOADER, not in MODEM.
So XXUBMJ7 + MODEM - bootloader = no Knox
Of course I can not confirm, because I am now on XXUBMJ7 and return to older FW is not possible.
Click to expand...
Click to collapse
No sure but my observation......
I come from AMH3 Prerootet Rom and i have Modded my SystemUI.apk so if are not samsung offical (see in Download Mode) Flashed XXUBMJ7 DBT from Sammobile with Odin. Boot the Phone and the Modem Still on AMH3 and i have no Knox and WiFi with this.
Flashed Offical AMG8 from Sammobile with odin and Update my Phone with OTA..... Now Modem XXUBMJ7 with Knox and working wifi.
so it was with me ....
Is already possible to root the Galaxy a3 (2017) on Nougat and so yes can sombody give a link?
Sure, search in the forum there is a thread but remember to use supersu 2.82
I also have root, I have installed Magisk.
notthesun said:
Sure, search in the forum there is a thread but remember to use supersu 2.82
Click to expand...
Click to collapse
you mean this threat?
tonime said:
I also have root, I have installed Magisk.
Click to expand...
Click to collapse
you did it from this threat?
khanvict90 said:
you did it from this threat?
Click to expand...
Click to collapse
Yes, Root here:
https://forum.xda-developers.com/sa...root-sm-a320f-fl-y-samsung-galaxy-a3-t3556026
Magisk here:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
tonime said:
Yes, Root here:
https://forum.xda-developers.com/sa...root-sm-a320f-fl-y-samsung-galaxy-a3-t3556026
Magisk here:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Click to expand...
Click to collapse
How to install Magisk ???
If one of it's installation steps is to be fully unrooted first and the boot image should be stock.
I already rooted and modified the boot image as for this device we need to flash a file to the boot.img to stop the device from encrypting the internal storage to be able to mount it.
Please Help ...
tonime said:
Yes, Root here:
https://forum.xda-developers.com/sa...root-sm-a320f-fl-y-samsung-galaxy-a3-t3556026
Magisk here:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Click to expand...
Click to collapse
Thanks mate! But little quistion this is root for nougat right and do i need to unlock my boot loader or can i start right away because i did buy it yesterday so its fully stock and it is A320 FL im from the netherlands
khanvict90 said:
Thanks mate! But little quistion this is root for nougat right and do i need to unlock my boot loader or can i start right away because i did buy it yesterday so its fully stock and it is A320 FL im from the netherlands
Click to expand...
Click to collapse
By Odin flash TWRP, copy the Magisk file to the memory of the phone or to the SD card and Magisk flash by TPWR recovery.
When you restart, install the Magisk manager apk and that's it.
tonime said:
By Odin flash TWRP, copy the Magisk file to the memory of the phone or to the SD card and Magisk flash by TPWR recovery.
When you restart, install the Magisk manager apk and that's it.
Click to expand...
Click to collapse
Wow thats easy man thanks hehe and btw when i did install nougat on my phone i only flashed the ap is that a problem or should i flash al the other files like bl cp and csc togther? I was scared because i have a320FL and not a320F
tonime said:
By Odin flash TWRP, copy the Magisk file to the memory of the phone or to the SD card and Magisk flash by TPWR recovery.
When you restart, install the Magisk manager apk and that's it.
Click to expand...
Click to collapse
Edited: i found it i put it in sd card now its working i have root!!
Root 100% Working!
Root is working 100% for A3 (2017) Android 6.0.1 and even for 7.0!
Links are given in the Galaxy A series 2017 forum
After Flashing Twrp On Nougat
Some balck Screen Shows To Reset My Phone
Sorry Not Good In English
hi after flashing nougat on the a3 2017 i got in the settings menu two battery tabs other than the device maintenance, it's a bug or i flashed it in wrong way ?
edwardola said:
hi after flashing nougat on the a3 2017 i got in the settings menu two battery tabs other than the device maintenance, it's a bug or i flashed it in wrong way ?
Click to expand...
Click to collapse
This is normal and it happened because you flashed the AP file only
If you want to get rid of these Russian providers menus and have stock settings menu you need to flash the full rom files (BL+AP+CP+CSC) via Odin.
AK2H said:
This is normal and it happened because you flashed the AP file only
If you want to get rid of these Russian providers menus and have stock settings menu you need to flash the full rom files (BL+AP+CP+CSC) via Odin.
Click to expand...
Click to collapse
if i flash everything i get a fail but if i only flash ap it passes?
khanvict90 said:
if i flash everything i get a fail but if i only flash ap it passes?
Click to expand...
Click to collapse
No you shouldn't get a fail.
If you're encountering any issues in flashing via Odin make sure to use the latest version 3.12.3
AK2H said:
No you shouldn't get a fail.
If you're encountering any issues in flashing via Odin make sure to use the latest version 3.12.3
Click to expand...
Click to collapse
im using 3.12.7 and i am already on nougat but i want to flash all the files instead of only AP
is it possbile that it fails because the model number i have a 320FL not the F but i flashed the AP of F on FL it worked but if i want to flash all files it gives fail?
khanvict90 said:
im using 3.12.7 and i am already on nougat but i want to flash all the files instead of only AP
is it possbile that it fails because the model number i have a 320FL not the F but i flashed the AP of F on FL it worked but if i want to flash all files it gives fail?
Click to expand...
Click to collapse
Many people reported that the Russian firmware is working flawlessly on A320FL Model and no one mentioned any issues during the flash process.
For me, first time i flashed the rom the flash progress stopped near the end because i was using the 3.10.7 (not 3.12.7 as you mentioned) version just like you.
After using the 3.12.3 version it worked perfectly.
So you nead to use the latest version of Odin (3.12.3)
Whether this method can be applied in galaxy a7 2017 running in nougat?
Is there someone who test it already...I like to flash it but odin asking pit file. Odin fail pit security. What I need to do?
flash with odin 3.13.1.... everything works well besides the nfc also flash ap cd csc/home csc from android 8 but choose a bootloader from android 7 some u dont get the lock
nekos95 said:
flash with odin 3.13.1.... everything works well besides the nfc also flash ap cd csc/home csc from android 8 but choose a bootloader from android 7 some u dont get the lock
Click to expand...
Click to collapse
Fail still re-partition. Ask to set pit...
nekos95 said:
flash with odin 3.13.1.... everything works well besides the nfc also flash ap cd csc/home csc from android 8 but choose a bootloader from android 7 some u dont get the lock
Click to expand...
Click to collapse
Can u link files u downloaded? re-partition fail
Or do I need pit file to flash
Is wifi working too ?
Can we root Oreo?
And have TWRP also?
And revert back to Nougat if we want?
Excuse me if the questions are asked before..
broky said:
Can we root Oreo?
And have TWRP also?
And revert back to Nougat if we want?
Excuse me if the questions are asked before..
Click to expand...
Click to collapse
Not sure
Yes
Yes
if you want a clean install first install Nougat BL AP CP CSC of your device. After first boot on the settings screen, shutdown the device and go into bootloader mode, select AP from OREO, no other one, only AP. Press start and you A320FL will be upgrade to OREO. I installed Russia Oreo on A320Y
Sorry for my bad english
---------- Post added at 04:07 AM ---------- Previous post was at 04:02 AM ----------
I used Odin 3.13.1
Riicardogmz said:
if you want a clean install first install Nougat BL AP CP CSC of your device. After first boot on the settings screen, shutdown the device and go into bootloader mode, select AP from OREO, no other one, only AP. Press start and you A320FL will be upgrade to OREO. I installed Russia Oreo on A320Y
Sorry for my bad english
---------- Post added at 04:07 AM ---------- Previous post was at 04:02 AM ----------
I used Odin 3.13.1
Click to expand...
Click to collapse
Hey thanks that works now oreo on my 320fl.
Does it factory reset the phone ? I mean we don't have to put an oreo CSC ?
Just clean flashed nougat...
WiwiPouPou said:
Does it factory reset the phone ? I mean we don't have to put an oreo CSC ?
Just clean flashed nougat...
Click to expand...
Click to collapse
First flash clean nougat and use nougat fles only. When it boot first time where you start putting settings language etc. Shut down and flash only oreo AP file-> done
Its reset your phone...
CSC Oreo will get error of pit file wrong. BL Oreo will get error of Bootloader wrong. CP Oreo will get error of modem wrong. AP Oreo only contain upgrade files, this file is the correct to upgrade. Now, if you want a clean install, first flash Nougat and then flash only AP file from Russia Oreo, other ones files (BL, CP, CSC) are get error because not corresponding to device
Riicardogmz said:
CSC Oreo will get error of pit file wrong. BL Oreo will get error of Bootloader wrong. CP Oreo will get error of modem wrong. AP Oreo only contain upgrade files, this file is the correct to upgrade. Now, if you want a clean install, first flash Nougat and then flash only AP file from Russia Oreo, other ones files (BL, CP, CSC) are get error because not corresponding to device
Click to expand...
Click to collapse
Any possibility to keep data or restore from a TWRP backup?
Or can i directly flash AP file on nougat without loosing data?
EDIT:I was in nougat and i just flashed AP from Oreo directly,worked fine but did not keep my data,resetted the phone.
tried to flash recovery and failed.
EDIT2:suceeded with this https://forum.xda-developers.com/samsung-a-series-2017/development/recovery-a3-2017-t3758969
got root also flashing latest superuser zip:good:
So pop-up Window not working ?
Sorry guys for i am new to all this Samsung Knox Stuff - will this procedure (flash clean nougat first and then oreo AP only) trip the KNOX counter?
Thanks!
Doenen
doenen said:
Sorry guys for i am new to all this Samsung Knox Stuff - will this procedure (flash clean nougat first and then oreo AP only) trip the KNOX counter?
Thanks!
Doenen
Click to expand...
Click to collapse
Yes it's trip your Knox...I think. I flashed Russia version, but I was rooted already.
doenen said:
Sorry guys for i am new to all this Samsung Knox Stuff - will this procedure (flash clean nougat first and then oreo AP only) trip the KNOX counter?
Thanks!
Doenen
Click to expand...
Click to collapse
Flashing an official stock ROM (with Odin) should never trip Knox. At least it never happened to me with other Samsung phones (Galaxy Ace, Galaxy S3 Mini, Galaxy Alpha). I haven't tried with this one, but I bet it will be safe.
Hey Community,
Im new here and got a big problem with my s9.
I rooted it today with magisk, just recovered my backup.
Then i noticed that always when the phone is looking to locked screen it just crash and i cant start it (only with Volume up + Bixby + Power Button and then there choose the reboot function)
Would be great if someone know the reason why this happens.
Regards
bump
Probably something to do with restoring your backup
No talk about lucky patcher on XDA as it is classed as Warez
*Detection* said:
Probably something to do with restoring your backup
No talk about lucky patcher on XDA as it is classed as Warez
Click to expand...
Click to collapse
If i Factory Reset with my rooted phone now, will there be issues ?
Regards
EaZy21 said:
If i Factory Reset with my rooted phone now, will there be issues ?
Regards
Click to expand...
Click to collapse
No, it should just return to stock
I Factory reseted now, root is gone but the problem is still there ...
it definitly came after i root the phone, someone have ideas ?
Regards
EaZy21 said:
I Factory reseted now, root is gone but the problem is still there ...
it definitly came after i root the phone, someone have ideas ?
Regards
Click to expand...
Click to collapse
Try flashing stock 100% with CSC instead, do not restore any backup
*Detection* said:
Try flashing stock 100% with CSC instead, do not restore any backup
Click to expand...
Click to collapse
You mean flashing stock firmware?
what you mean with CSC ?
Im now download firmware from sammobile and then i flash with odin ?
Regards
EaZy21 said:
You mean flashing stock firmware?
what you mean with CSC ?
Im now download firmware from sammobile and then i flash with odin ?
Regards
Click to expand...
Click to collapse
You rooted your phone without knowing how to flash stock back?
Download the stock firmware, extract it, add all 4 sections to ODIN 3.13.1, do not use HOME_CSC, use CSC instead, put phone in download mode, flash
*Detection* said:
You rooted your phone without knowing how to flash stock back?
Download the stock firmware, extract it, add all 4 sections to ODIN 3.13.1, do not use HOME_CSC, use CSC instead, put phone in download mode, flash
Click to expand...
Click to collapse
Thank you.
This slow download on sammobile sucks btw. ^^
Regards
So i rooted again, and the problem is there again ...
i dont know what could be the problem, in stock firmware the crash in locking screen isnt there.
Regards
EaZy21 said:
So i rooted again, and the problem is there again ...
i dont know what could be the problem, in stock firmware the crash in locking screen isnt there.
Regards
Click to expand...
Click to collapse
Have you found a Fix to this? What software did you use for rooting? Did you install a custom recovery?
For me this exact thing happens with TWRP and magisk. On the TWRP Thread jesec pointed out that rooting without flashing a custom kernel will most likely cause issues.
Was hoping you may have found a solution
I have a Samsung A7 2017 (SM-A720F) brought from UAE having latest Oreo update. While I tried to flash an INS version over this Odin detects the phone. But after hitting start it takes some time and gives error like failed. I also tried to root it with CF-AutoRoot file. Those also have the same error. Developer mode, USB debugging and OEM unlock are ON. Trying with windows 10 + Odin 3.13 (latest). Any solution ?
Combination file successfully flashed. But, still not able to flash another country File. Can I proceed with original country file (i.e XSG stock firmware) ?
Please help me
MajjuBhai said:
I have a Samsung A7 2017 (SM-A720F) brought from UAE having latest Oreo update. While I tried to flash an INS version over this Odin detects the phone. But after hitting start it takes some time and gives error like failed. I also tried to root it with CF-AutoRoot file. Those also have the same error. Developer mode, USB debugging and OEM unlock are ON. Trying with windows 10 + Odin 3.13 (latest). Any solution ?
Click to expand...
Click to collapse
Root with twrp and magisk, cfautoroot is OG in my opinion . Try flashing just CSC_home or whatever it is called in Odin.
SnowFuhrer said:
Root with twrp and magisk, cfautoroot is OG in my opinion . Try flashing just CSC_home or whatever it is called in Odin.
Click to expand...
Click to collapse
I'm able to flash Combination file, original country (XSG) file and also flashes TWRP. But, I can't get access to TWRP after flashing it. Always it replaced by Stock recovery. And apart these 3 files nothing flashes, including CSC file alone...
MajjuBhai said:
I'm able to flash Combination file, original country (XSG) file and also flashes TWRP. But, I can't get access to TWRP after flashing it. Always it replaced by Stock recovery. And apart these 3 files nothing flashes, including CSC file alone...
Click to expand...
Click to collapse
When you flash twrp, untick auto reboot in odin. Boot straight into twrp without booting system.
SnowFuhrer said:
When you flash twrp, untick auto reboot in odin. Boot straight into twrp without booting system.
Click to expand...
Click to collapse
Ok Boss. One last question. After rooting my phone Can I able to flash any country Firmware on my phone ?
If Yes, Any precuations to be taken ?
(Currently it is on RMM State : Prenormal, I will try flashing TWRP after a couple of days.)
MajjuBhai said:
Ok Boss. One last question. After rooting my phone Can I able to flash any country Firmware on my phone ?
If Yes, Any precuations to be taken ?
(Currently it is on RMM State : Prenormal, I will try flashing TWRP after a couple of days.)
Click to expand...
Click to collapse
It won't help change the csc. But hadesrom oneui has a huge selection of csc's you can select when flashing it.
SnowFuhrer said:
It won't help change the csc. But hadesrom oneui has a huge selection of csc's you can select when flashing it.
Click to expand...
Click to collapse
If I flashed HadesROM OneUI with 'INS' CSC can I able to downgrade it with INS Stock firmware in future ?
Is the binary thing really need to consider while flashing that ?
PS : I looked on HadesROM. It is temptating. But, the real problem is with VoLTE which affects the network badly here... The VoLTE only network is a large mess here... And thanks for your unconditional Help & Support :fingers-crossed:
MajjuBhai said:
If I flashed HadesROM OneUI with 'INS' CSC can I able to downgrade it with INS Stock firmware in future ?
Is the binary thing really need to consider while flashing that ?
PS : I looked on HadesROM. It is temptating. But, the real problem is with VoLTE which affects the network badly here... The VoLTE only network is a large mess here... And thanks for your unconditional Help & Support :fingers-crossed:
Click to expand...
Click to collapse
It should work to change csc with Hades and then flash stock. Just make sure you don't reflash csc then because it could change.