Develop Bugs

XGear EXOSkin

This is the Brushed Steel Blue EXOSkin available
Made of 3M DI-NOC material
Made in America
Extremely easy installation
Provides better critical coverage than other skins
So here's the installation-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Align the camera hole, before pressing down make sure everything lines up to your liking
Press out any air bubbles with your fingers, smoothing out the surface
The speaker cover is next, align the speaker and make sure it is center. This piece should be about 1mm away from the battery door.
After you smooth that bottom part down, continue onto the sides using the same procedure. Align it about 1mm away from the battery door and press to stick it on.
Next do the sides that are closest to the screen. You'll want to align the skin with the volume rocker, then work your way onto the sides. This should be flush with the screen.
Now for the bottom piece, align the charging port hole. This piece should be about 1mm away from the front screen.
For the top, align the small notch to the little opening for the battery door. This piece should be flush with the front screen.
The last piece, the front, is optional. I would not recommend using it if you have a screen protector as there is a possibility of it lifting the screen protector up if you ever need to remove the skin. Align the camera hole and speaker.
Here's the finished product, turned out well and was done in less than 5 mins. Take your time and you can get it near perfect. Do note that we did not use a heat gun as it was not needed.

It looks ugly at the bottom corners. But thanks for the pics.
Sent from my Galaxy Nexus using xda premium

I like the blue color, but otherwise it's a bit too plain for me. Also, I don't like that you can still see the Verizon logo faintly through the skin.

Whoa way to rip of an existing brand name... I wonder if XO Skins knows about these guys?

ifse said:
I like the blue color, but otherwise it's a bit too plain for me. Also, I don't like that you can still see the Verizon logo faintly through the skin.
Click to expand...
Click to collapse
The brushed steel blue is a thinner material which is why you can see the logo.
troubleshot said:
Whoa way to rip of an existing brand name... I wonder if XO Skins knows about these guys?
Click to expand...
Click to collapse
Two completely different companies. XO sells screen protectors. Two completely different names too.

Like Chevrolet and Schevrolet are different.

troubleshot said:
Like Chevrolet and Schevrolet are different.
Click to expand...
Click to collapse
Not going to argue with you, either be useful or quit trolling.

ljwnow said:
It looks ugly at the bottom corners. But thanks for the pics.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
ifse said:
I like the blue color, but otherwise it's a bit too plain for me. Also, I don't like that you can still see the Verizon logo faintly through the skin.
Click to expand...
Click to collapse
Ask and you shall receive!

Any chance we could get some pictures of the brushed titanium and brushed aluminum, that sounds like EXACTLY what I would be looking for.
I am coming from a DX2, and while the phone sucked, it was nice feeling the metal, made me feel safe, lol
Thanks in advance!

AHpatriots37 said:
Any chance we could get some pictures of the brushed titanium and brushed aluminum, that sounds like EXACTLY what I would be looking for.
I am coming from a DX2, and while the phone sucked, it was nice feeling the metal, made me feel safe, lol
Thanks in advance!
Click to expand...
Click to collapse
I'll see what I can do, I do believe I have the Brushed Titanium somewhere but it's the old design.
Oh I know, I switched from an X

pmoradi2002 said:
Ask and you shall receive!
Click to expand...
Click to collapse
Oh so pretty! Is the burnt orange a solid color, or is it two-tone?
Now I have to go clean myself

ifse said:
Oh so pretty! Is the burnt orange a solid color, or is it two-tone?
Now I have to go clean myself
Click to expand...
Click to collapse
It's a solid color, glossy

is this only for the LTE version or will it fit the GSM version as well?

j0j036 said:
is this only for the LTE version or will it fit the GSM version as well?
Click to expand...
Click to collapse
CDMA only.

Any plans to make a GSM version? I'm really liking the look of the white with black portions of the phone showing!

j0j036 said:
Any plans to make a GSM version? I'm really liking the look of the white with black portions of the phone showing!
Click to expand...
Click to collapse
Quite honestly, most likely not. I'll look into it though.

Any luck on finding pics of the titanium and aluminum?
Thanks in advance!
Sent from my Galaxy Nexus using Tapatalk

AHpatriots37 said:
Any luck on finding pics of the titanium and aluminum?
Thanks in advance!
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
heres the link on amazon with pictures for the brushed aluminum still havent found ones for titanium though. Just ordered my self a white carbon fiber one
http://www.amazon.com/XGear-EXOSkin...DMZU/ref=sr_1_1?ie=UTF8&qid=1327033618&sr=8-1

bethanensinger said:
heres the link on amazon with pictures for the brushed aluminum still havent found ones for titanium though. Just ordered my self a white carbon fiber one
http://www.amazon.com/XGear-EXOSkin...DMZU/ref=sr_1_1?ie=UTF8&qid=1327033618&sr=8-1
Click to expand...
Click to collapse
Yes that's the Brushed Aluminum however it is the old design. I have sent out a bunch of colors for review so I'll be sure to put that video on here once completed.

Any idea when any of these reviews are coming? I am really leaning towards the skinomi skin right now but have been hoping this product would win me over.
Is the titanium translucent like the blue? Does it feel plasticy or like real metal?
Answers appreciated! Thanks!
Sent from my Galaxy Nexus using Tapatalk

Yay! Got the 3M Estoc+ for my Galaxy Note!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yes, those of you who had one for your old Galaxy S2, it's now available for the Note. I consolidated a bunch of orders in my country and these will belong to a bunch of crazy cats who were willing to pay a hefty amount for this screen protector.
This protector is slightly thinner than the old 3M Estoc+ on the SGS2, but the surface is a lot slicker. Scotchtape could not even stick properly to it for me to lift it up to remove dust. The surface feels FANTASTIC! It's matte, yet it's glossy as seen in the photo. I know there are other protectors in the market, but this is still my favourite one.
No rainbow effect, glossy clarity, and matte feel, this is why this thing is the best protector IMO. You can find this protector in gmarket, go to the co.kr version and change to the English site.

http://english.gmarket.co.kr/challe...pos_class_kind=T&keyword_order=3m+estoc++note
That's the link for anyone that wants it, I certainly don't understand it too well.
I will keep my eyes for it, too. It looks really nice! Does it at all mess with the image clarity? I had those Matte screen protectors and felt great to the touch, but readability was HORRIBLE.

zkyevolved said:
http://english.gmarket.co.kr/challe...pos_class_kind=T&keyword_order=3m+estoc++note
That's the link for anyone that wants it, I certainly don't understand it too well.
I will keep my eyes for it, too. It looks really nice! Does it at all mess with the image clarity? I had those Matte screen protectors and felt great to the touch, but readability was HORRIBLE.
Click to expand...
Click to collapse
Most of the time the clarity is affected by the horrendous rainbow effect for the lesser matte screen protectors. The rainbow effect is nearly invisible, and I would say it's even negligible. I can't see it in a white screen, maybe some can. This is why I swear by this protector, because the screen is clear like a gloss screen protector, but has the matte feel. You can say it's like an improved and better SGIPEN Ultra Optics.

Vulpix, missed the order. Any extras?

thanks for highlighting this screen protector as the best out there
showing as 16.10 dollars for me so around £10..
anyone interested doing a mass order in the UK?

fast_asleep said:
thanks for highlighting this screen protector as the best out there
showing as 16.10 dollars for me so around £10..
anyone interested doing a mass order in the UK?
Click to expand...
Click to collapse
It's worth every cent! I still like how it's a gloss screen protector that feels like a matte one!

Bump, anyone else got this for their Note?

Simply the best SP out there. Period.

Glas.t ftw

Vulpix said:
Bump, anyone else got this for their Note?
Click to expand...
Click to collapse
Just got this from another HWZ member as I missed your mini-MO earlier on.
All I can add is that this ****e is da BOMB! IMHO of SPs out there, it really is the best! Swiping on the screen now is a bloody joy!
Didn't have another cam with me, so I can only show shots of the packaging...
Love it!
Sent from my GT-N7000 using Tapatalk 2

zkyevolved said:
http://english.gmarket.co.kr/challe...pos_class_kind=T&keyword_order=3m+estoc++note
That's the link for anyone that wants it, I certainly don't understand it too well.
I will keep my eyes for it, too. It looks really nice! Does it at all mess with the image clarity? I had those Matte screen protectors and felt great to the touch, but readability was HORRIBLE.
Click to expand...
Click to collapse
do you know where I get that anywhere else? They are out of stock and i cant find another shop.
Need a delivery to Germany.
Thx
and btw, since the backside description doesnt say anything about adhesion, you only have one try to put the SP on?
Cuz I need many tries for my last SPs

k!DDa said:
do you know where I get that anywhere else? They are out of stock and i cant find another shop.
Need a delivery to Germany.
Thx
and btw, since the backside description doesnt say anything about adhesion, you only have one try to put the SP on?
Cuz I need many tries for my last SPs
Click to expand...
Click to collapse
It's not a hard glass SP or something, just your typical screen protector, so you can take it off and on a few times if need be.

You live in the states op.? You selling these?
Sent from my GT-N7000 using Tapatalk 2

how much? I would like to try..will it give you a goosebumps feel when you touch it?
also, how it compared to zenus luminous-A ?

Can anyone with this SP tell me if the following indicated areas are covered?

nitroblu said:
Can anyone with this SP tell me if the following indicated areas are covered?
Click to expand...
Click to collapse
"A" & "D" are covered, however "B" & "C" is a U-shaped cutout together.
Sent from my GT-N7000 using Tapatalk 2

coolfire said:
"A" & "D" are covered, however "B" & "C" is a U-shaped cutout together.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
thanks!

nitroblu said:
thanks!
Click to expand...
Click to collapse
My pleasure. It really is an awesome sp. Get it!
Sent from my GT-N7000 using Tapatalk 2

Hello, this sounds like a good SP. But can I know where can I get it in Singapore? Thanks.

TaikNaw said:
Hello, this sounds like a good SP. But can I know where can I get it in Singapore? Thanks.
Click to expand...
Click to collapse
I haven't seen one in singapore but you can order it from GMarket. Waiting for mine to arrive
Sent from my GT-N7000 using xda premium

MIME USA vs. Power Support Screens

I got the "shock absorbing" screen protector from Motorola by Power Support, while it was nice it was plastic. So it didn't feel the same, fit on the device nice...but it still had a "tacky" feel like ZAGG if you've ever tried those. I've used it a few weeks, held up nice, just didn't like the feeling.
Here are some images of it installed:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As soon as I found out MIME USA was getting one, I contacted them. I got it yesterday & installed it, instantly fell in love. Fits on device like a glove, no more "tacky" feeling screen on my device. There is 2 small "bubbles" on top/bottom right side on the device, hopefully with time they go away. Also, I think there's a small lint in the middle of the screen, hopefully it doesn't bother me too much.
Here are some images of it installed:
Overall both are awesome screen protectors, but the glass on the MIME USA will always win me over. If you have any questions about it let me know & I will do my best to answer them
Here's a small gallery of both screen protectors with/without cases http://imgur.com/a/9gBCx

I'm surprised there was no questions or anything, I saw a lot of posts on the other thread.
Sent from my XT1060 using Tapatalk

WinDroidGuy said:
I got the "shock absorbing" screen protector from Motorola by Power Support, while it was nice it was plastic. So it didn't feel the same, fit on the device nice...but it still had a "tacky" feel like ZAGG if you've ever tried those. I've used it a few weeks, held up nice, just didn't like the feeling.
Here are some images of it installed:
As soon as I found out MIME USA was getting one, I contacted them. I got it yesterday & installed it, instantly fell in love. Fits on device like a glove, no more "tacky" feeling screen on my device. There is 2 small "bubbles" on top/bottom right side on the device, hopefully with time they go away. Also, I think there's a small lint in the middle of the screen, hopefully it doesn't bother me too much.
Here are some images of it installed:
Overall both are awesome screen protectors, but the glass on the MIME USA will always win me over. If you have any questions about it let me know & I will do my best to answer them
Here's a small gallery of both screen protectors with/without cases http://imgur.com/a/9gBCx
Click to expand...
Click to collapse
Out of curiosity, what kind of case are you using?

ijeenyus said:
Out of curiosity, what kind of case are you using?
Click to expand...
Click to collapse
The Air Jacket from Power Support
Sent from my XT1060 using Tapatalk

Thanks for the pictures! I'm waiting for mine to come in the mail still. Glad o see that it is nice.

GBpfan95 said:
Thanks for the pictures! I'm waiting for mine to come in the mail still. Glad o see that it is nice.
Click to expand...
Click to collapse
It's an awesome screen protector for sure
Sent from my Nexus 7 using Tapatalk

Nice pictures and comparison. That is disappointing to hear about the PS shock absorbing version that you used. My PowerSupport Brilliant is definitely not what I would describe as tacky.

8_8 said:
Nice pictures and comparison. That is disappointing to hear about the PS shock absorbing version that you used. My PowerSupport Brilliant is definitely not what I would describe as tacky.
Click to expand...
Click to collapse
My finger wouldn't slide as easily as it does now, otherwise it was an awesome screen protector. It would also miss some taps, so that was a bummer
Sent from my XT1060 using Tapatalk

WinDroidGuy said:
The Air Jacket from Power Support
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
That's an Air Jacket Grip. The Air Jacket is completely clear, and doesn't cover the top/bottom or the buttons.

Can you get us a picture from the side of the phone without a case on so we can see how far the protector protrudes from the glass surround?

nhizzat said:
Can you get us a picture from the side of the phone without a case on so we can see how far the protector protrudes from the glass surround?
Click to expand...
Click to collapse
If you look in the album there's a few there

WinDroidGuy said:
If you look in the album there's a few there
Click to expand...
Click to collapse
Thanks! Seems to protrude no more than the protectors from Moto's site.
In the MIME specific thread, several members are complaining about poor fitment. Looking at the pics in your album, fitment seems to be spot on.

nhizzat said:
Thanks! Seems to protrude no more than the protectors from Moto's site.
In the MIME specific thread, several members are complaining about poor fitment. Looking at the pics in your album, fitment seems to be spot on.
Click to expand...
Click to collapse
You really can't see it from the pictures. I'm not saying "Don't get one", but unless you have a bulker case, in my situation--a Supcase--then it won't work that well.

Nillkin glass screenprotectors for OnePlus X

I'm happy with it. The glass feels better then the plastic stock one.
This is the normal version, not the 2.5D version. That one is even better.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the 2.5D 0.2mm version.
Use the 'hinge method' to apply the screenprotector.
Warning: Apparently not all OnePlus X screens are perfectly flat, so you could be dissapointed with the endresult.

Where to buy?

I got it from ebay.nl
Just go to your local ebay site and search for "OnePlus X Nillkin glass screenprotector" should cost about 8 dollar.

Today I've recieved the 2.5D 0.2mm Pro Nillkin glass screenprotector, it's a perfect fit. Tomorrow I'll post new images!

Yay! Can't wait to see it. Thanks.

This looks awesome considering every other one I heard about (including the eltd one I got) doesn't work well
Can anyone post pics of the 2.5d one ?

gol-D said:
This looks awesome considering every other one I heard about (including the eltd one I got) doesn't work well
Can anyone post pics of the 2.5d one ?
Click to expand...
Click to collapse
Pics of the 2.5D 0.2mm one are in the first post now :good:

Altough they are both installed perfectly, I cant really tell a difference in the pictures between the standard and the 2.5D one. Does the 2.5D one actually cover more of the screen, or whats difference in your opinion? Thx for sharing your experience and your pics!

guuus said:
Altough they are both installed perfectly, I cant really tell a difference in the pictures between the standard and the 2.5D one. Does the 2.5D one actually cover more of the screen, or whats difference in your opinion? Thx for sharing your experience and your pics!
Click to expand...
Click to collapse
The normal version had straight edges and is 0.3mm thick, I can feel the edge.
The 2.5D version had rounded edges and is 0.2mm thick, I almost can't feel the edge.

Got it. Thx!

Did you remove the screen protector that the phone came with before installing the nillkin one?
If so, was it easy to remove and did it leave any glue or residue?

galaxy89 said:
Did you remove the screen protector that the phone came with before installing the nillkin one?
If so, was it easy to remove and did it leave any glue or residue?
Click to expand...
Click to collapse
I've removed the original screen protector. It's one of those static ones, no residue at all, and it can be reused! Just don't kink it!

How long did it take for the screen protector to be shipped to your house?

cesararduino said:
How long did it take for the screen protector to be shipped to your house?
Click to expand...
Click to collapse
6 november -> 5 december, so it takes about a month with free schipping from China.

Thread is a bit old but I wish to give my input. I have tried three glass screen protectors and all three had the bubble issue. Now my first OPX which I returned due to it having a yellow tint, had the air bubbles all around the guard (official 1+), the replacement device also has the same issue, for this I used two nillkin guards, with both attempts in vain. It seems like only a few devices are fully 'compatible' with the screen protectors.
Note: both of my nillkin ones were the amazing h, this one. Feel like trying the H+ but am not sure, I used alignment stickers as well but still no good results!

ShinOrochiX said:
Thread is a bit old but I wish to give my input. I have tried three glass screen protectors and all three had the bubble issue. Now my first OPX which I returned due to it having a yellow tint, had the air bubbles all around the guard (official 1+), the replacement device also has the same issue, for this I used two nillkin guards, with both attempts in vain. It seems like only a few devices are fully 'compatible' with the screen protectors.
Note: both of my nillkin ones were the amazing h, this one. Feel like trying the H+ but am not sure, I used alignment stickers as well but still no good results!
Click to expand...
Click to collapse
Is there a difference between the H and H+? From glancing at the product description, I didn't see mention of any difference.

Adding another question, which is the one in the pictures?
Can we see pictures of boths? @Chris.nl

itzimeow said:
Is there a difference between the H and H+? From glancing at the product description, I didn't see mention of any difference.
Click to expand...
Click to collapse
I think the H+ has rounded edges or something.

FcoEnrique said:
Adding another question, which is the one in the pictures?
Can we see pictures of boths? @Chris.nl
Click to expand...
Click to collapse
I don't understand your question. There are pictures of both screenprotectors.

Chris.nl said:
I don't understand your question. There are pictures of both screenprotectors.
Click to expand...
Click to collapse
My bad, just noticed :silly:
Those are these:
http://www.amazon.com/gp/product/B0...rue&ref_=ox_sc_act_title_1&smid=ATVPDKIKX0DER
Or this one:
http://www.amazon.com/Protector-Nil...e=UTF8&qid=1454466112&sr=8-2&keywords=oneplus
They aren't tempered, right?

Case recommendatiom for Le Max 2

Hey guys,
I just ordered a `Black Sandstone Case` from Aliexpress and it just arrived today. Took about 6 weeks till I got it in Germany. Cost me around 6.33euro.
The delivery itself was very nervewracking, because neither the Tracking was really working for China nor for Germany.
Anyways, the case itself looks very good and feels like a high quality material to me. The grip is very good.
Fit tight too.
The only `negative` aspect I can tell is that the case doesnt really fit that well around the cameralense itself. There is nearly no space between lense and case on the upper side, but in comparison `very much` space on the lower side. As the left and right sides are still symmetric, it doesnt really bother me.
Here are some Pics made by an iPhone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I really recommend it for the look, feel and price! :good:

The case looks good. Some shops offered a gift option including earphone, flip case, two type of softcases and a tempered glass.
Choosing DHL delivery reduces your wait time to 9-11 days.

EverPing said:
The case looks good. Some shops offered a gift option including earphone, flip case, two type of softcases and a tempered glass.
Choosing DHL delivery reduces your wait time to 9-11 days.
Click to expand...
Click to collapse
DHL wasnt available for my product but i Got a glass protector with it
But my official leeco tempered glass came a week before, so i dont need it at all.
By the way: i Got a thin and a really thick one in the tempered glass box. Do i have to apply the thin first for better gluing of the thick one? Or just apply the thick one and have an extra one for spare?

I think you apply only one. I guess the thick one feels more sturdy, the thin one might provide better visibility but breaks easier.
katze94 said:
DHL wasnt available for my product but i Got a glass protector with it
But my official leeco tempered glass came a week before, so i dont need it at all.
By the way: i Got a thin and a really thick one in the tempered glass box. Do i have to apply the thin first for better gluing of the thick one? Or just apply the thick one and have an extra one for spare?
Click to expand...
Click to collapse

katze94 said:
Hey guys,
I just ordered a `Black Sandstone Case` from Aliexpress and it just arrived today. Took about 6 weeks till I got it in Germany. Cost me around 6.33euro.
The delivery itself was very nervewracking, because neither the Tracking was really working for China nor for Germany.
Anyways, the case itself looks very good and feels like a high quality material to me. The grip is very good.
Fit tight too.
The only `negative` aspect I can tell is that the case doesnt really fit that well around the cameralense itself. There is nearly no space between lense and case on the upper side, but in comparison `very much` space on the lower side. As the left and right sides are still symmetric, it doesnt really bother me.
Here are some Pics made by an iPhone
View attachment 3791730
View attachment 3791731
View attachment 3791732
I really recommend it for the look, feel and price! :good:
Click to expand...
Click to collapse
Is it smooth or frosted ? A link or buyer name would be great , Please

MadMicro said:
Is it smooth or frosted ? A link or buyer name would be great , Please
Click to expand...
Click to collapse
It is frosted. I am not able to Look for the sellers name atm

Is the case thicker than the camera housing? I want to get a case that is thicker so when I put down the phone the camera doesnt scratch

ZeMartelo said:
I want to get a case that is thicker so when I put down the phone the camera doesnt scratch
Click to expand...
Click to collapse
https://www.aliexpress.com/item/TPU...Max-2-X820-case-with-stand-5/32676359980.html
https://www.aliexpress.com/item/TPU...-Letv-Le-2-Max-X820-case-5-7/32669340508.html

Just want to share with you the view of my brand new skin and bumper by Luphie.

Qron said:
Just want to share with you the view of my brand new skin and bumper by Luphie.
Click to expand...
Click to collapse
Look very nice, link please.

Qron said:
Just want to share with you the view of my brand new skin and bumper by Luphie.
Click to expand...
Click to collapse
I have been trying to locate skins for max 2 but no luck
Please share the link

Skin: https://www.aliexpress.com/item/For...bon-Fiber-Front-Back-Sticker/32718744730.html
Bumper: https://www.aliexpress.com/item/LS0...inum-metal-frame-for-Letv-Le/32676725090.html
As for the skin. There is a peace for FP sensor, but no luck to make it operational when covered. On the other hand, it's made batter than shown on the link I gave you. There is even a sticker for the SIM tray.

Qron said:
Skin: https://www.aliexpress.com/item/For...bon-Fiber-Front-Back-Sticker/32718744730.html
Bumper: https://www.aliexpress.com/item/LS0...inum-metal-frame-for-Letv-Le/32676725090.html
As for the skin. There is a peace for FP sensor, but no luck to make it operational when covered. On the other hand, it's made batter than shown on the link I gave you. There is even a sticker for the SIM tray.
Click to expand...
Click to collapse
Thanks for the link
Is there a way to cover the capacitive buttons in the front
I use on screen navigation buttons so it will annoy me
Also does it come with a screen protector if it doesn't do we have to remove the screen protector already on the device
Thanks again

[email protected] said:
Thanks for the link
Is there a way to cover the capacitive buttons in the front
I use on screen navigation buttons so it will annoy me
Also does it come with a screen protector if it doesn't do we have to remove the screen protector already on the device
Thanks again
Click to expand...
Click to collapse
Since I have silver version of X820, parts for the front have no use for me. The manufacturer hasn't removed inner parts of cut-outs, so if you want to cover capacitive buttons, there is a way.
The set came with screen protector, but I have't tested it out either since I've already aplied one before.

Qron said:
Since I have silver version of X820, parts for the front have no use for me. The manufacturer hasn't removed inner parts of cut-outs, so if you want to cover capacitive buttons, there is a way.
The set came with screen protector, but I have't tested it out either since I've already aplied one before.
Click to expand...
Click to collapse
That is awesome
I am ordering them right now
Wish I had the silver color{not available in india}
Thanks for help
:good::good:

I bought them all
https://www.amazon.com/gp/product/B01GNZ1SHO/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B01LCO9ABW/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
http://www.geekbuying.com/item/Leat...eTV-LeEco-Le-Max-2-Pro-X820-Black-368915.html
http://www.geekbuying.com/item/Leat...ern-For-LeTV-LeEco-Le-Max-2-Black-368911.html