Related
Hello,
i have a problem with my zenfone 2.
Since i recover it from a hardbrick with xfstk, i can't access recovery anymore.
when i go into fastboot and then select recovery, the phone reboot and boot normaly.
I try to flash custom recovery from fastboot like twrp or cwm but it ended with the same result.:silly:
Otherwise the phone work perfectly.
What did i miss?
Am i the only one facing this problem?
Sincerly
kriegmaster said:
Hello,
i have a problem with my zenfone 2.
Since i recover it from a hardbrick with xfstk, i can't access recovery anymore.
when i go into fastboot and then select recovery, the phone reboot and boot normaly.
I try to flash custom recovery from fastboot like twrp or cwm but it ended with the same result.:silly:
Otherwise the phone work perfectly.
What did i miss?
Am i the only one facing this problem?
Sincerly
Click to expand...
Click to collapse
When you flashed raw , did you complete it with 0123456789abcdef as your serial number ?
if did this ,this should be rectified first for recovery to operate correctly .
i did a video just for this
http://forum.xda-developers.com/zenfone2/general/unbrick-vid-tutorial-restore-serial-t3411064
timbernot said:
When you flashed raw , did you complete it with 0123456789abcdef as your serial number ?
if did this ,this should be rectified first for recovery to operate correctly .
i did a video just for this
http://forum.xda-developers.com/zenfone2/general/unbrick-vid-tutorial-restore-serial-t3411064
Click to expand...
Click to collapse
thanks for the quick answer, i don't think i complete it with 0123456789abcdef as the serial number.
in fact after the xfstk phase, i have pushed system.img, recovery.img, boot.img,etc with fastboot line command, i didn't use asus tool.
that way i manage to keep all my data, without the need to wipe.
Can i add the serial number afterward?
Sincerly
kriegmaster said:
thanks for the quick answer, i don't think i complete it with 0123456789abcdef as the serial number.
in fact after the xfstk phase, i have pushed system.img, recovery.img, boot.img,etc with fastboot line command, i didn't use asus tool.
that way i manage to keep all my data, without the need to wipe.
Can i add the serial number afterward?
Sincerly
Click to expand...
Click to collapse
Not too sure about after, never tried myself
But -- is your serial correct in bootloader ?
timbernot said:
Not too sure about after, never tried myself
But -- is your serial correct in bootloader ?
Click to expand...
Click to collapse
i just verified what is my Serial Number in the bootloader and it is "0123456789ABCDEF" .
but i see that i have a blank for the HW_VERSION and a "?" fir the SIGNING and SECURE_BOOT.
also BOOTLOADER VERSION is unknown .
kriegmaster said:
i just verified what is my Serial Number in the bootloader and it is "0123456789ABCDEF" .
but i see that i have a blank for the HW_VERSION and a "?" fir the SIGNING and SECURE_BOOT.
also BOOTLOADER VERSION is unknown .
Click to expand...
Click to collapse
How you going on ?
timbernot said:
How you going on ?
Click to expand...
Click to collapse
i go in bootloader by turning my device off and maintaining volume up + power or with the adb command.
both work.
kriegmaster said:
i go in bootloader by turning my device off and maintaining volume up + power or with the adb command.
both work.
Click to expand...
Click to collapse
and recovery ? your initial problem which is serial related -- Hows that going ?
timbernot said:
and recovery ? your initial problem which is serial related -- Hows that going ?
Click to expand...
Click to collapse
if i try to go in recovery mode from the bootloader menu or with fastboot/adb command line it lead to same result, it normal boot instead.
after checking, i had no probleme with the serial number wich appear in the bootloader and is "0123456789ABCDEF" .
I really don't know why it don't want to boot into recovery.
Sincerly
to be able to gain access to recovery - you will have to correct serial number
http://forum.xda-developers.com/zenfone2/general/unbrick-vid-tutorial-restore-serial-t3411064
timbernot said:
to be able to gain access to recovery - you will have to correct serial number
http://forum.xda-developers.com/zenf...erial-t3411064
Click to expand...
Click to collapse
thank you,
can you pass the link again, it fail to open the link, it target nothing http://forum.xda-developers.com/zenf...erial-t3411064
kriegmaster said:
thank you,
can you pass the link again, it fail to open the link, it target http://forum.xda-developers.com/zenf...erial-t3411064
Click to expand...
Click to collapse
ooops yup
http://forum.xda-developers.com/zenfone2/general/unbrick-vid-tutorial-restore-serial-t3411064
timbernot said:
ooops yup
http://forum.xda-developers.com/zenfone2/general/unbrick-vid-tutorial-restore-serial-t3411064
Click to expand...
Click to collapse
Thank you for your help.
So i manage to clarify something.
I think my bootloader might not be up to date.
It don't show the same serial number as asus tool or as the one i can see in the phone parameter.
can i update only the bootloader?
Sincerly
kriegmaster said:
Thank you for your help.
So i manage to clarify something.
I think my bootloader might not be up to date.
It don't show the same serial number as asus tool or as the one i can see in the phone parameter.
can i update only the bootloader?
Sincerly
Click to expand...
Click to collapse
did u success in restore the recovery ? i have the same situation but mine only has os, no recovery.
Lenovo p2 a42
I am accidently change the band in to United States
Through the secret code *#*#4636#*#* phone information under three dot menu band setting
GSM/UMTS band mode
I changed it to United States
And lost the 2g/3g network in sim slot 1
Second sim working perfectly no problem
My first sim only support 4g network
I am reset the phone it will not help me
Any other solution pls help me
Phone not rooted/bootloader unlocked
You have GSM/UMTS mode in that secret settings?
I have LTE/UMTS auto (PRL) mode currently set.
Could you mention where are you from and what operator you using.
Btw i am from India using Airtel.
A similar post for reference :
https://forum.xda-developers.com/zuk-z1/help/changed-radio-band-t3477016
have you tried using this app : https://play.google.com/store/apps/details?id=www.extremedroid.com.a4gltetoolkit
(it launches a hidden menu)
salmanvts said:
Lenovo p2 a42
I am accidently change the band in to United States
Through the secret code *#*#4636#*#* phone information under three dot menu band setting
GSM/UMTS band mode
I changed it to United States
And lost the 2g/3g network in sim slot 1
Second sim working perfectly no problem
My first sim only support 4g network
I am reset the phone it will not help me
Any other solution pls help me
Phone not rooted/bootloader unlocked
Click to expand...
Click to collapse
I did the same thing on my previous phone Lenovo vibe P1
You messed up the broadband bands for the rest of the world,the US have there own bands
I fixed it with the qpst software from Qualcomm and a qcn backup from someone with the same phone
You just have to restore the back up
It's somewhat tricky if you don't have any experience
Something else that could work is a TWRP backup of the efs partition it think is called, just restore it and you're good to go.
dreigosh said:
I did the same thing on my previous phone Lenovo vibe P1
You messed up the broadband bands for the rest of the world,the US have there own bands
I fixed it with the qpst software from Qualcomm and a qcn backup from someone with the same phone
You just have to restore the back up
It's somewhat tricky if you don't have any experience
Something else that could work is a TWRP backup of the efs partition it think is called, just restore it and you're good to go.
Click to expand...
Click to collapse
My Problem is SOLVED with Update my Device through Download the Rom file and Flash (Without Root)
dont try if your device is unlocked boot loader
There is another way to solve this problem
[emoji732] some user reported this methode in unlocked boot loader device may be cause lost imei, make a twrp backup completely and proceed, other wise try the first methode [emoji732]
Resetting the modem information through fastboot
1. Enter Fastboot Mode
2. Type the Command
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
Dont worry , the erase command , it will reset the modem and reolve network issues (accedently change band issue)
:good:
salmanvts said:
There is another way to solve this problem
[emoji732] some user reported this methode in unlocked boot loader device may be cause lost imei, make a twrp backup completely and proceed, other wise try the first methode [emoji732]
Resetting the modem information through fastboot
1. Enter Fastboot Mode
2. Type the Command
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
Dont worry , the erase command , it will reset the modem and reolve network issues (accedently change band issue)
:good:
Click to expand...
Click to collapse
I too Accidentally changed radio band to United States, and now I'm not receiving any signal on sim 1. I'm on stock that is not rooted and unlocked bootloader....can anybody please tell me how to fix this without root and without unlocking bootloader... I'm from india and the carrier is Vodafone pls help me out here guys....thanks in advance!!!!
salmanvts said:
There is another way to solve this problem
[emoji732] some user reported this methode in unlocked boot loader device may be cause lost imei, make a twrp backup completely and proceed, other wise try the first methode [emoji732]
Resetting the modem information through fastboot
1. Enter Fastboot Mode
2. Type the Command
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
Dont worry , the erase command , it will reset the modem and reolve network issues (accedently change band issue)
:good:
Click to expand...
Click to collapse
Don't do this
I tried same thing when i was downgrade to mm
U will lost your both sim signal
Do to this command
If your device bootloader is unlocked dont try to erase command it will lost your imei and network
salmanvts said:
If your device bootloader is unlocked dont try to erase command it will lost your imei and network
Click to expand...
Click to collapse
Do you know any 100% working method.... thanks in advance.
Harish Topgi said:
Do you know any 100% working method.... thanks in advance.
Click to expand...
Click to collapse
Do you unlocked your boot loader
salmanvts said:
Do you unlocked your boot loader
Click to expand...
Click to collapse
No not yet..
Harish Topgi said:
No not yet..
Click to expand...
Click to collapse
One lenovo p2 user in whatsapp group successfully solved his problem by doing the erase command option
his boot loder was locked
I dont know this worked for you
I did:
fastboot erase modemst1
fastboot erase modemst2
fastboot erase cache
fastboot reboot
and it fixed the problem. Bootloader hasn't been unlocked.
georgeba said:
I did:
fastboot erase modemst1
fastboot erase modemst2
fastboot erase cache
fastboot reboot
and it fixed the problem. Bootloader hasn't been unlocked.
Click to expand...
Click to collapse
This command can reset my phone? I dont want to loose data, i m on stock rom and not unlocked bootloader
Akash.j said:
This command can reset my phone?
Click to expand...
Click to collapse
No.
salmanvts said:
Lenovo p2 a42
I am accidently change the band in to United States
Through the secret code *#*#4636#*#* phone information under three dot menu band setting
GSM/UMTS band mode
I changed it to United States
And lost the 2g/3g network in sim slot 1
Second sim working perfectly no problem
My first sim only support 4g network
I am reset the phone it will not help me
Any other solution pls help me
Phone not rooted/bootloader unlocked
Click to expand...
Click to collapse
Flash original stock ROM and your issue will be gone
---------- Post added at 04:55 AM ---------- Previous post was at 04:52 AM ----------
Akash.j said:
This command can reset my phone? I dont want to loose data, i m on stock rom and not unlocked bootloader
Click to expand...
Click to collapse
You need backup your data to pc then flash stock rom
Shuvamilu said:
You need backup your data to pc then flash stock rom
Click to expand...
Click to collapse
But sergsinger said no data loss ? , i confused now ?
Akash.j said:
But sergsinger said no data loss, i confused now
Click to expand...
Click to collapse
If you will use command to erase modem - there will be no data loss, but if you flash stock ROM data loss will be.
sergsinger said:
If you will use command to erase modem - there will be no data loss, but if you flash stock ROM data loss will be.
Click to expand...
Click to collapse
I will use command, it's pretty easy i hope :silly:
Accidently hit the "clean all and lock" bat, it did the job...now it's absolutely kicked me out. Loads fastboot only, can't do anything. Bootloader now locked yet again, error states "can't erase lock state" nothing I do will get this thing working....i'm in tears
poco f3 is my phone.
What rom did you have before
CraigUK87 said:
Accidently hit the "clean all and lock" bat, it did the job...now it's absolutely kicked me out. Loads fastboot only, can't do anything. Bootloader now locked yet again, error states "can't erase lock state" nothing I do will get this thing working....i'm in tears
poco f3 is my phone.
Click to expand...
Click to collapse
Read warranty policy:
https://www.mi.com/uk/service/warranty?v=1#warrant
Maybe you can have free repair.
zaki789 said:
What rom did you have before
Click to expand...
Click to collapse
Elite OS. Was unlocked.
Does anyone have EDL access that would be willing to save me?
I gess u used MiFlash tool if u locked ur bootloader (clear all and lock), so I guess again that u flashed an stock rom (since MiFlash tool works with fastboot stock rom only). That means that ur not on Elit ROM anymore but in a stock ROM. If u can access fastboot as u claimed, try to unlock ur bootloader again....maybe a miracle is happen and it will work without bonding ur account to ur phone In this stage, u can not mess up ur phone more, so give it a try
Try to unlock bootloader again. It should be possible if you unlocked bootloader before.
It doens't work, it asks me to do the old adb, i can't get in the phone to enable unlock.
but yes, i did...rookie mistake, poxy thing shouldn't even be there and now Im more screwed than ever
What did you flashed with miflash?Stock rom?
When the phone starts at the POCO logo do you have the little lock at the top of the screen locked ?
hexisg said:
What did you flashed with miflash?Stock rom?
Click to expand...
Click to collapse
Yep, was going back to stock. I really don't know what to do. Some guy is offerign to fix for £25...but...just seems fishy and I have 0 in my bank
"couldn't unlock" please add your acc in MIUI settings > Dev Ops > Mi unlock.
This is the error I get.
CraigUK87 said:
Yep, was going back to stock. I really don't know what to do. Some guy is offerign to fix for £25...but...just seems fishy and I have 0 in my bank
Click to expand...
Click to collapse
You can try this guy https://xiaomi.eu/community/threads/bricked-mi-8-edl-flashing-problem.58984/#post-582694
Personally didn't contact him, so you have to risk it to verify, and high chance to charge you some repair fee.
If you think everyone who offers EDL but request payment is fishy, then your only choice is Xiaomi repair center.
In your state, chances for EDL access free of charge is extremely low, even non-exist.
If you want free of charge, then try Xiaomi repair center. There's chance for free repair, that is, if your device meet the warranty coverage policy.
CraigUK87 said:
"couldn't unlock" please add your acc in MIUI settings > Dev Ops > Mi unlock.
This is the error I get.
Click to expand...
Click to collapse
fixed? i have a fix use xiaomi adb fastboot tools for bl unlock its unoffical but still works im also like by mis i pressed clean all and lock whille insstalling redmi k40 rom in my mi 11x so my phone booted only to fastboot so i just clicked on unlock my phone got unlockdd before data getting erased it went to fastboot then i check fastboot oem device-info then it said bootloader unlock true then just flash your stock stock rom thats all
Have you ever heard of XiaoMiTool V2? I saw some posts that it is a tool for bricked devices but I dont know for sure.
Renatoskie said:
Have you ever heard of XiaoMiTool V2? I saw some posts that it is a tool for bricked devices but I dont know for sure.
Click to expand...
Click to collapse
idk
I had a similar issue with a Motorola. I tried this, so no promises...but generally I think it's "hot booting" the boot image. I ran the command:
fastboot -b flash boot boot.img
It returned some output like "downloading..." and something else. Of course, locate and put your matching boot.img file in your fastboot directory before flashing. Afterwards, my phone booted into the system like nothing was wrong. I suppose it didn't make it to flashing the system partition? which left it bootable?
Please, corrections, I'm uh, new <----.
notquitecurious said:
I had a similar issue with a Motorola. I tried this, so no promises...but generally I think it's "hot booting" the boot image. I ran the command:
fastboot -b flash boot boot.img
It returned some output like "downloading..." and something else. Of course, locate and put your matching boot.img file in your fastboot directory before flashing. Afterwards, my phone booted into the system like nothing was wrong. I suppose it didn't make it to flashing the system partition? which left it bootable?
Please, corrections, I'm uh, new <----.
Click to expand...
Click to collapse
You cant flash anything via adb if your bl is locked -_-
If you have an f3 and flashed a fastboot rom you shouldn’t get any issue!! There is a little tool to switch to edl from fastboot , but even having access to that you need a verified mi account to flash or pay someone , its around 25$ had the same issu 7 months ago i can provide you the contact of a legit guy who did for me
I think you have to first put your phone in edl mode by opening the case (melt the glue using a hair dryer) and shorting 2 pins. You should start worrying about edl credentials after you have done that.
bouyhy01 said:
You cant flash anything via adb if your bl is locked -_-
Click to expand...
Click to collapse
Yes, apparently you can. My bootloader was locked when I input that command. The phone then booted into the normal system. You have to have a matching boot image though.
Hi everybody,
yesterday I tried flashing the stock pocof3 rom back onto my phone, but since it got stuck in a bootloop at the fastboot logo. Showing the poco logo for a milisecond and then straight to fastboot..
(before this I flashed twrp and the arrowOS recovery and images a few time trying, without succes, to install this rom)
Last thing I did was flash via the mi-flash tool and did't see the "clean and lock" selection so it's also in lock state again.
I cant get adb to find the phone although the mi-flashtool is finding it.
anyone any tips?
I tried the vol up power trick, but this didn't help, keeps loading into fastboot
Did Mi Flash give an error message after trying to flash?
dreamytom said:
Did Mi Flash give an error message after trying to flash?
Click to expand...
Click to collapse
I dont recall giving an error, so i dont think so
now it is though, when trying to flash the firmware. error erasing boot_ab (failed: erase not allowed in lock state)
Kaayman said:
I dont recall giving an error, so i dont think so
now it is though, when trying to flash the firmware. error erasing boot_ab (failed: erase not allowed in lock state)
Click to expand...
Click to collapse
I'm not sure, but you may still be able to flash official ROMs.
But in "Configuration" make sure Erase is disabled
Kaayman said:
I dont recall giving an error, so i dont think so
now it is though, when trying to flash the firmware. error erasing boot_ab (failed: erase not allowed in lock state)
Click to expand...
Click to collapse
BAD NEWS... your Poco is bricked. You cannot flash ANYTHING using a PC when your bootloader is locked.
(I did same thing on a Mi11 5g last week and ended up selling it on eBay for spare & repairs
I tried sideload flash, miflash, copying update.zip to internal storage via ADB, and many other options - all without success).
- if your POCO is under warranty in your country (i.e. not a chinese import)... contact Xiaomi Support they can re-flash correct ROM
- Ask your local phone repair store... they *might* be able to flash original ROM back by using "Chimera" engineering software.
dreamytom said:
I'm not sure, but you may still be able to flash official ROMs.
But in "Configuration" make sure Erase is disabled
Click to expand...
Click to collapse
this doesn't seem to be an option. there is a checkbox with "erase all" but all are already unchecked
dezborders said:
BAD NEWS... your Poco is bricked. You cannot flash ANYTHING using a PC when your bootloader is locked.
(I did same thing on a Mi11 5g last week and ended up selling it on eBay for spare & repairs
I tried sideload flash, miflash, copying update.zip to internal storage via ADB, and many other options - all without success).
- if your POCO is under warranty in your country (i.e. not a chinese import)... contact Xiaomi Support they can re-flash correct ROM
- Ask your local phone repair store... they *might* be able to flash original ROM back by using "Chimera" engineering software.
Click to expand...
Click to collapse
This is what I feared already..
Kaayman said:
This is what I feared already..
Click to expand...
Click to collapse
- Bootloader was re-locked whilst a custom ROM was in the phone.
(MIUI with Locked bootloader will not boot up where ROM is not stock or does not match the region/product code).
You cannot apply for bootoader unlock because you cannot boot up into Android and request the unlock via Developer mode.
You cannot remotely (via PC cable) flash any ROM into a Xiaomi / POCO phone whilst botloader is locked.
You are in a chicken and egg situation.,,, but if you find a way to repair your phone, please let us know how you achieved it.
Good luck!
If the system hasn't booted up yet there is a chance that you will be able to unlock bootloader again. Try it.
mar.ur said:
If the system hasn't booted up yet there is a chance that you will be able to unlock bootloader again. Try it.
Click to expand...
Click to collapse
That's what I'm thinking too ...
Connect the phone to pc and do the bootloader unlock again via the mi unlock app - you don't need to apply again and stuff as long as you're able to recognise the phone inside app correctly
Rstment ^m^ said:
That's what I'm thinking too ...
Connect the phone to pc and do the bootloader unlock again via the mi unlock app - you don't need to apply again and stuff as long as you're able to recognise the phone inside app correctly
Click to expand...
Click to collapse
thanks everyone for all the replies!
tried unlocking it via the mi unlock tool (latest) but it says (in chinese) its locked by nr 123***456 by searching the phone - can't unlock
edit:
google lens translates:
X The phone has been locked by the account number 661****647 by searching the phone, Can't unlock
but it's not the nr. of my account..
dezborders said:
- Bootloader was re-locked whilst a custom ROM was in the phone.
(MIUI with Locked bootloader will not boot up where ROM is not stock or does not match the region/product code).
You cannot apply for bootoader unlock because you cannot boot up into Android and request the unlock via Developer mode.
You cannot remotely (via PC cable) flash any ROM into a Xiaomi / POCO phone whilst botloader is locked.
You are in a chicken and egg situation.,,, but if you find a way to repair your phone, please let us know how you achieved it.
Good luck!
Click to expand...
Click to collapse
Is it not even possible to flash Official ROMs?
Isn't there like a system that it checks the signature of the ROM and if it's a signed ROM it allows the flash? Or am I mistaken?
dreamytom said:
Is it not even possible to flash Official ROMs?
Isn't there like a system that it checks the signature of the ROM and if it's a signed ROM it allows the flash? Or am I mistaken?
Click to expand...
Click to collapse
Nope bootload locked = no 'remote' flashes via pc
Apparently there is an 'authenticated user' mode for Xiaomi engineers in MiFlaah and also an EDL Emergency Download Mode which you can trigger by shorting out 2 pins on the motherboard so bypass bootloader lock and flash any ROM
Neither were available options for me
dezborders said:
Nope bootload locked = no 'remote' flashes via pc
Apparently there is an 'authenticated user' mode for Xiaomi engineers in MiFlaah and also an EDL Emergency Download Mode which you can trigger by shorting out 2 pins on the motherboard so bypass bootloader lock and flash any ROM
Neither were available options for me
Click to expand...
Click to collapse
I also tried to simulate a local OTA by copying update.zip to internal storage using ADB push command and booting into recovery mode to flash ... But it doesn't work for me
dezborders said:
Nope bootload locked = no 'remote' flashes via pc
Apparently there is an 'authenticated user' mode for Xiaomi engineers in MiFlaah and also an EDL Emergency Download Mode which you can trigger by shorting out 2 pins on the motherboard so bypass bootloader lock and flash any ROM
Neither were available options for me
Click to expand...
Click to collapse
I'm now in the procedure to sent it back under warranty. any idea if this is possible and what the cost would be if not under warranty?
If all fails i'll try the shorting by pins, should be interesting
I think a warranty repair claim is your best bet ... I have never read anywhere that unlocking bootloader invalidates Xiaomi warranty (Unlike Samsung and so many other brands!)
If warranty repair is re refused try a few independent repair shops
Last resort is get the back cover off the phone and short out the EDL pins
Good luck!
Let us know if you manage to get your phone booting up again
See this thread (last post) for a possible workaround via a 3rd party recovery image to flash EU rom
[Solved] Stuck in fastboot with locked bootloader
HI there! After multiple problems with the custom ROMs I tested, I finally decided to go back to the stock ROM by downloading it from the official thread. I extracted the .tgz archive, run the "flash_all.bat" program, which failed by saying it...
forum.xda-developers.com
Kaayman said:
I'm now in the procedure to sent it back under warranty. any idea if this is possible and what the cost would be if not under warranty?
If all fails i'll try the shorting by pins, should be interesting
Click to expand...
Click to collapse
I once hardbricked (complete blackscreen, not even Fastboot reachable) a Poco F3.
I requested a replacement from Amazon and that worked.
I said a software update bricked it.
Of course having to do that is really bad, but I was scared of opening the back.
dezborders said:
See this thread (last post) for a possible workaround via a 3rd party recovery image to flash EU rom
Bootloop to fastboot logo and back in lock state
Hi everybody, yesterday I tried flashing the stock pocof3 rom back onto my phone, but since it got stuck in a bootloop at the fastboot logo. Showing the poco logo for a milisecond and then straight to fastboot.. (before this I flashed twrp and...
forum.xda-developers.com
Click to expand...
Click to collapse
You pasted the current thread, do you have the link to the thread you meant?
Kaayman said:
You pasted the current thread, do you have the link to the thread you meant?
Click to expand...
Click to collapse
ROOT RED MAGIC 8 PRO V3.18Your device must be bootloader unlocked
To unlock bootloader enable oem unlock in developer options and usb debugging
Then type the command: adb reboot bootloader
Or access fastboot with hardware key: Power + volume down
Once in fastboot type the following command to unlock:
fastboot flashing unlock
fastboot flashing unlock_critical"
Access fastboot then type the command:
fastboot flash init_boot_a magisk_patched-25200_3.18UN.img
fastboot reboot
Done
You check if the correct active slot is a, if it is b just change the command a with b
Only use for V3.18 version I have not tested other versions
Note: Absolutely do not patch the boot file, you will have a continuous boot error
Root Done
The backups with just ommiting the B slots is 12.7 gb so i cant personally help you with that. Have you tried flashing the OTA's boot.img (might even try boot_a.img) and init_boot.img while slot A is selected? Not the magisk modded files either.
mcfizzlestag said:
The backups with just ommiting the B slots is 12.7 gb so i cant personally help you with that. Have you tried flashing the OTA's boot.img (might even try boot_a.img) and init_boot.img while slot A is selected? Not the magisk modded files either.
Click to expand...
Click to collapse
i flashed those 2 files but still can't boot the phone, go to logo then turn off the screen, can only go to fastboot and recovery, i sideload 47% it gives error
If you are rooted, please help me, I will send you coffee donate, please help me, full backup
I Pm'd you the backups now that i am at home, hopefully they help
Im at a stand still with this. I have already fastboot flashing unlock_critical as you can see in which it states Device already unlocked but whether I am in bootloader and fastboot I get Flashing is not allowed in a lock state. Any help from some else that ran into this or has knowledge on it?
Thanks
Update. Fixed the issue. Add the step of "fastboot flashing unlock" before "fastboot flashing unlock_critical"
If You can flash a GSI, It'd be a decisive factor in getting people to buy this phone. The company should be paying you to do this, but they're probably too greedy to make a bigger profit
I've successfully flashed a few A13 GSIs but screen lock is a still a problem and so far calls and messaging doesn't work normally.
I know that this next question were asked before, but i keep not understanding much about it: if i revert back the root completely (unroot the phone, lock the oem and delete "third party apps" like magisk, etc.) will my warranty be back? i am talking about the redmagic 8 pro void specifically. Can someone help me understanding this? i have searched on internet about this and they all say that simply it depends on manufacturers to "detect" if the warranty was void (even if you unroot and lock oem and all).... Thank you in advance
Muriyata said:
I know that this next question were asked before, but i keep not understanding much about it: if i revert back the root completely (unroot the phone, lock the oem and delete "third party apps" like magisk, etc.) will my warranty be back? i am talking about the redmagic 8 pro void specifically. Can someone help me understanding this? i have searched on internet about this and they all say that simply it depends on manufacturers to "detect" if the warranty was void (even if you unroot and lock oem and all).... Thank you in advance
Click to expand...
Click to collapse
yes, you can return warranty
Muriyata said:
I know that this next question were asked before, but i keep not understanding much about it: if i revert back the root completely (unroot the phone, lock the oem and delete "third party apps" like magisk, etc.) will my warranty be back? i am talking about the redmagic 8 pro void specifically. Can someone help me understanding this? i have searched on internet about this and they all say that simply it depends on manufacturers to "detect" if the warranty was void (even if you unroot and lock oem and all).... Thank you in advance
Click to expand...
Click to collapse
Well once you unlock bootloader it clearly says warranty: void in fastboot so it probably is very easy to detect
edzchen said:
Well once you unlock bootloader it clearly says warranty: void in fastboot so it probably is very easy to detect
Click to expand...
Click to collapse
In that case, why op said that the warranty can still be returned after relocking the bootloader?
As you see, it is very connfusing... Some guys say yes, some others not. :s
edzchen said:
I've successfully flashed a few A13 GSIs but screen lock is a still a problem and so far calls and messaging doesn't work normally.
Click to expand...
Click to collapse
Could you please tell me the steps to flash A13 GSI roms. Thanks.
[email protected] said:
Could you please tell me the steps to flash A13 GSI roms. Thanks.
Click to expand...
Click to collapse
Unlock bootloader
Reboot into fastboot
Flash system with the GSI.img
Mr.PvT said:
i flashed those 2 files but still can't boot the phone, go to logo then turn off the screen, can only go to fastboot and recovery, i sideload 47% it gives error
If you are rooted, please help me, I will send you coffee donate, please help me, full backup
Click to expand...
Click to collapse
I have the same problem with my phone. Could you please tell me if you know find the solution to this. Thanks.
[email protected] said:
I have the same problem with my phone. Could you please tell me if you know find the solution to this. Thanks.
Click to expand...
Click to collapse
inbox me
Mr.PvT said:
inbox me
Click to expand...
Click to collapse
How can I inbox you?
Oh no... Can this be fixed?
Stusick said:
View attachment 5862143View attachment 5862145View attachment 5862147
Click to expand...
Click to collapse
Did you follow the instructions correctly, this error may have you flashed the wrong boot file, right?
Mr.PvT said:
Did you follow the instructions correctly, this error may have you flashed the wrong boot file, right?
Click to expand...
Click to collapse
Yes, I unlocked the bootloader first.
Then I flash boot and an error occurred.
Did I get a brick or is there hope?)