I Have 2 No Early 2005 (with the cog shaped camera pod) M2000's which have cracked screens, i have now managed to get hold of a working late 2005(with the round camera pod) unit with a duff PCB and swapped the front half (screen and keyboard). When i swap this over all i get is a white screen, is there a software problem and is this compatable. I have checked that the front half does work by fitting it in a late 2005 working unit
Hope someone can help
with thanks
Jubblyone
Same here
I, and others I have read about, have the same problem, but I haven't found of a solution. Let me know if you have any luck.
there are 2 types of screens on BAs..a Sony and Toppoly...u have to make sure u get the correct one for each device.
hello,
I managed to break my LCD of XDA IIi, I managed to find the screen from ebay but i'm confused as ther are two models is says the first generationa nd the 2nd, one with silver flex and the other with a gold flex.
Which one would fit my Alphile, O2 XDA IIi. Please help me to find one. I'm in france...
take your xda apart.look on your board,if its a generation 1-it will be a slide in cable/a generation 2 is a clip on version.i have a version 1[slide in] for sale if you need one.pm me
I also broked/scratched my XdaIIi screen (my 3 years old daughter ), the phone continued to work, but when i rebooted it, it started to ask me to touch the target to align the screen.
But it doesn't work...no alignement...
When i touch it i can hear the plastic cover, but the screen is also scratched/broked.
Any solution?
Kind regards
It seems that you have to change a new screen for your phone. You can go to the nearest phone store and fix it. I always think the phone store is safer than online shop cause you can watch when they fix it.
samurai1978 said:
I also broked/scratched my XdaIIi screen (my 3 years old daughter ), the phone continued to work, but when i rebooted it, it started to ask me to touch the target to align the screen.
But it doesn't work...no alignement...
When i touch it i can hear the plastic cover, but the screen is also scratched/broked.
Any solution?
Kind regards
Click to expand...
Click to collapse
Change a new one....That problem is annoying especially when you have to make a call and that happens.
I hv just purchased a gen 2 for my m1000. SO how to decide is to open ur Device and chk the part no. OR look at the connecting cable Gen1 is insertion type (Sandwich) and Gen2 is Cap type it looks like Plug. AND b4 purchse i cooked a rom which is without The Welcome and Touch Alignment so if u wish i will upload it for u.
Anyone have experience with this?
http://www.ebay.com/itm/11133421820...eName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
neof1z said:
Anyone have experience with this?
http://www.ebay.com/itm/11133421820...eName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Click to expand...
Click to collapse
no. but for $50 bucks it might be worth it just to see. I don't like that it's shipping from China though. I'm always weary about that because I have bought things that never made it to me.
The images are misleading. It's basically a bluetooth band that can control your phone's music player. As the photochopped images show mail and phone icons, no where in it's description says it can notify you of sms but offers wetchat and qq, and cannot notify you of any missed calls.
But if it's a watch remote you are looking for, then this is it. But not for me lol.
This is a new Bluetooth Smart U Watch U8 which is compatible with all Bluetooth V2.0 or above enabled smartphones,
tablets and PCs (support Android 2.3 or above),such as iPhone 4, 4S, 5, 5S, Sumsung S3, S4, Note 2, Note 3, Note 4 etc.
Specifications:
Ambient Noise: ≤75dB
Transmitting Range: ≥10m
Talk Time: about 3 hours
Charging Time: about 1 hour
Music Play Time: about 6 hours
Standby Time: about 160 hours<br>
Bluetooth Version: Bluetooth V3.0+EDR
Range of Frequency: 2.4GHz spectrum
Language Support: English, Chinese
Bluetooth Protocol: A2DP + HFP 1.5 + HS P 1.2
Power Supply: Built-in 230mAh rechargeable battery
Features:
Stopwatch function
Support hands-free calls
Material: Steel + Silicon
Answer or Dial calls from your wrist
1.48" Capacitive Touch Screen TFT LCD
Time / Date / Week / Battery state display
Ringing reminder when you receive a call
Display the number or name of incoming calls
Play the music in your phone (after Bluetooth paring)
Dial Size: 4.6 x 4.2 x 1cm / 1.81 x 1.65 x 0.39 inch
Ringing reminder once your mobile phone disconnected
Sync phone book/SMS/call history(only for android phone)
Altitude Meter,Passometer,,Photograph,Barometer,Vibration
Remote taking photo function:You can control your cellphone to take photo from your wrist.
Ring reminder when your Android 2.3 or above smart phone receive a message (including Wechat, Facebook, Twitter,WhatsApp, Skype,and so on)
Anti-lost alarm function: When cellphone left watch alarm automatically, after a certain distance to avoid lose the phones
So I just got this watch in today. I bought it because my sony smart 1 watch broke and I thought this might hold me over until I buy the sony smartwatch 2 as a replacement.
So the watch does look nice, feels really solid. It does have a built in speaker and mic that you can use and make and receive calls and the quality of the sound isn't too bad.
The interface is really cheap looking though, don't be fooled by the images. It looks nothing like the pictures, its not some bright colorful menu. The interface is some generic bland looking menu that is just black with gold colored icons. Yes the screen is touchscreen but to really navigate around the watch itself you have to push the 3 buttons on the bottom of the screen most of the time.
Notifications are really weird on this thing, first you have to install some weird apk that isn't too user friendly. Then configure it (Figure it out yourself) to make features work like Text messages and even then its just really weird how it handles incoming messages from the phone.
My text messages work because I am using an adroid phone, but it the text messages get mixed up. After a while lets say I get a text from billy, it displays the persons name fine and the message. Then if I get a text from Anna, same thing, works fine. But after a while of getting text messages the names get mixed up. Lets say Anna text me again, it will say billy for some reason, and it will begin to repeat that persons name for any text message you get. So in the end you really dont know the name of the person really texting you.
Incoming calls are displayed for me so far with no problems. Shows me the phone number or the contact name.
So far its just a toy for me to mess around with since I got it really cheap. I wasn't expecting too much.
I forgot to mention that the phone comes in Chinese, so you have to play with the menu until you some how get on English.
Would I buy it again? Probably not. You get what you paid for.
Thanks for your review
Gesendet von meinem Nexus 5 mit Tapatalk
Is the smartwach 2 from sony really worth it? I'm in doubt between this an android wear
glaudrem said:
Is the smartwach 2 from sony really worth it? I'm in doubt between this an android wear
Click to expand...
Click to collapse
Not really... I've had one for a few days and, unless you're pushing a button, it's just a simple watch. More precisely, in order to check anything, you have to activate it via the button and maybe go through the menus. Otherwise, it only displays a watch (whose face you can only pick from about 10 built ones).
Not to mention battery life (2, maybe 3 days) and price (around 120-140 euros in Europe).
Thanks for the review. One question though.
When it's in standby, does it show the time ?
Or is it like a cellphone, that you have to turn on the screen just to see what time it is and if you touch nothing, the screen is off ?
---------- Post added at 05:36 PM ---------- Previous post was at 05:23 PM ----------
Someone said he was suspicious about the chinese shopping sites, but I order from china all the time (3/4 orders / month) for years and I have always been 100% satisfied.
When something was broken, it was replaced free of charge, when something was witheld at customs, I got refunded, had things come in from under $10 to over $100, no issues !
And if you're scared, just pay with paypal, they will act as intermediate in a conflict, they can block the payment if you were scammed and even if you're too late, they have $500 insurance
Came here because I was considering the watch, which I found here : (free shipping !)
http://www.tinydeal.com/new-u-watch-u8-bluetooth-smart-dial-bracelet-watch-p-127195.html
and here :
http://www.dx.com/p/u8-wearable-1-48-touch-screen-smart-watch-w-bluetooth-pedometer-black-315057#.U2ujrnV53IA
When its on standby it does not show the time, you have to push the button on the side to display the time.You can customize the duration though, 10-50 seconds but not on all the time, My sonysmart watch was the same way except that when I shook my hand, it would display the time without me having to push the button, but that was optional.
Multia, on ebay and aliexpress is much cheaper
I bought mine off ebay from someone named jn-tech for $54.99 with shipping included.
Does it look like the pictures? Could someone who has this watch please post some pics?
Thanks
Since I have under 10 post, I can't post the youtube link I made about the watch
Well this was interesting. Too bad I found it AFTER I bought! But it's cheap so no biggie. I'm really just seeing if I want a watch-phone combo or not. I"m leaning toward not but want to try it out before I invest in something big. I'm retired military and I tend toward the big, black, glow in the dark watches but I am open to something techie. Thanks for the input!
Ginxeng said:
Since I have under 10 post, I can't post the youtube link I made about the watch
Click to expand...
Click to collapse
Can you sent me the link?
Review of the U8 Bluetooth Smart Wrist Watch
https://www.youtube.com/watch?v=NmkW_g75eg4
Thanks to Ginxeng!!!!!!!!!!!
neof1z said:
Review of the U8 Bluetooth Smart Wrist Watch
https://www.youtube.com/watch?v=NmkW_g75eg4
Thanks to Ginxeng!!!!!!!!!!!
Click to expand...
Click to collapse
Absolutely! About what I thought it would be. I'll let you know when mine gets in. Mainly I want to see if I can geek it out enough to wear a smart watch or if I want to stick with my manly steel one.
How would you say this watch compares with the smartq? I know that the smartq is about twice as much and has better specs but does the U8 seem to offer enough to justify buying one so cheap? Or would you personally think it's better to get a smartq or namebrand watch?
---------- Post added at 08:33 PM ---------- Previous post was at 08:32 PM ----------
Thanks for the video.
neof1z said:
Review of the U8 Bluetooth Smart Wrist Watch
https://www.youtube.com/watch?v=NmkW_g75eg4
Thanks to Ginxeng!!!!!!!!!!!
Click to expand...
Click to collapse
Got my U8 today and here's my initial impression:
Plus - 1. Immediately went to English, no Chinese. EZ setup. 2. Several choices for watch faces. Several choices for menu icons. Some are color and big. 3. Love the vibration for notification. 4. Speaker while on phone good. 5. Phone pick up works good.
Cons - 1. Washes out in sunlight bad. That's a show stopper for me. 2. Have to turn off phone Bluetooth and use handset for a private call. Switch is in my phone app and simple but still. 3. I use Touchdown for email and it doesn't notify on the watch. Working on that. 4. Band seems a bit 'soft', not hard rubber.
Added Con - not having the watch portion always lit is driving me crazy!
Hello
I just replaced the screen on my nexus and now the touch won't work. It doesn't respond to anything, maybe you guys have some ideeas . Maybe you can see something wrong in the photos I've attached (sorry for potato quality).
Ohmanwhy said:
Hello
I just replaced the screen on my nexus and now the touch won't work. It doesn't respond to anything, maybe you guys have some ideeas . Maybe you can see something wrong in the photos I've attached (sorry for potato quality).
Click to expand...
Click to collapse
Did you replace the combo or just the touchscreen? Did you test it before when everything hooked up before taping it to the bezel? What kind of tape did you use? You may want to post a higher resolution thumb of the area where the ribbons connect to the board.
graphdarnell said:
Did you replace the combo or just the touchscreen? Did you test it before when everything hooked up before taping it to the bezel? What kind of tape did you use? You may want to post a higher resolution thumb of the area where the ribbons connect to the board.
Click to expand...
Click to collapse
Nope I didn't test it but I put some tape that is easy to remove so i just removed it checked all connections, nothing seems wrong. I attached some new photos (best quality i can get right now). Also I replaced the full combo lcd+touch. Thanks for the reply.
Ohmanwhy said:
Nope I didn't test it but I put some tape that is easy to remove so i just removed it checked all connections, nothing seems wrong. I attached some new photos (best quality i can get right now). Also I replaced the full combo lcd+touch. Thanks for the reply.
Click to expand...
Click to collapse
Nothing looks out of the ordinary in those pics, though I don't see how one can replace the combo without removing the boards. Can you explain that as some step in the procedure might cause this. Instead of guessing too much, let's take one thing at a time.
graphdarnell said:
Nothing looks out of the ordinary in those pics, though I don't see how one can replace the combo without removing the boards. Can you explain that as some step in the procedure might cause this. Instead of guessing too much, let's take one thing at a time.
Click to expand...
Click to collapse
I can't post links so you can search youtube for "Nexus 7 Screen Replacement 2013 model, replace the glass and fix the LCD - Repairs UK" and that's how I did it. And the thing I know I'm missing is the tape he takes off at min 2:43.
Ohmanwhy said:
I can't post links so you can search youtube for "Nexus 7 Screen Replacement 2013 model, replace the glass and fix the LCD - Repairs UK" and that's how I did it. And the thing I know I'm missing is the tape he takes off at min 2:43.
Click to expand...
Click to collapse
Any revision number on the digitizer? I know that there are different revisions of the daughter board and that if your tablet came with a 1.3 board and you replaced it with a 1.4 board the touch would not work, but I don't know if it is the same for the touch screen
Sent from my Nexus 7 using XDA Free mobile app
Ohmanwhy said:
I can't post links so you can search youtube for "Nexus 7 Screen Replacement 2013 model, replace the glass and fix the LCD - Repairs UK" and that's how I did it. And the thing I know I'm missing is the tape he takes off at min 2:43.
Click to expand...
Click to collapse
I looked at the clip, and it seems ok, except the emi tape hanging from the frame would not stick to the back of the lcd that way. I don't know that it should make a difference since yours is totally unresponsive to any touch. Same case with the missing one going on top of the touchscreen connectors.
There have been cases with other Asus models where you'd need to re-flash the touch firmware before it works. If the daughter board had been working before you replaced the screen, you can either (1) re-flash a stock rom (444 to be sure) using fastboot, or (2) if you're on custom Kitkat (I don't know about Lollipop), re-flash said firmware following the instructions HERE. Remember you have to have one of those kernels mentioned therein installed for the firmware to stick.
I don't know that the touchscreen version should make a difference since they all use the same rom wih the same touch firmware embedded. Unless the rom contains many versions that would automatically select one fitting your hardware version, in which case you should flash the official Kitkat.
Failing all the above, I'd conclude the touchscreen itself is bad. It's a rare occurrence, but has been known to happen. If you bought it from a reputable seller, you should be able to get a replacement. Don't hesitate to ask if something is unclear. Good luck.
I have the same problem. I bought two digitizers and lcd, and both times the problem is the same. I checked for a rev number on the digitizer, but with no luck. The tape I used was M3 300LSE. Already flashed 4.4.4 stock firmware on Flo kernel, but it didn't work.
I can't believe I bought TWO broken digitizers from two different sellers. I will retry the flash...
I tried to see if there is any recognizable serial number on digitizer, and I explain what I found here: http://forum.xda-developers.com/nex...xus-7-2013-touch-screen-unresponsive-t3035124
I'm sorry I'm posting about same issue in two different threads, i did open the other one cause I didn't see this one...