Xposed breaks sensors - Xiaomi Mi Mix 2 Questions & Answers

Less of a question and more of a confirmation, to anyone using RR based Oreo 8.1 ROMs, when you install Xposed, does your accelerometer, gyroscope, and other sensors stop working?
I ask because my auto-rotation stops working when I install xposed, and to me that's just an annoyance.

hork-bajir12 said:
Less of a question and more of a confirmation, to anyone using RR based Oreo 8.1 ROMs, when you install Xposed, does your accelerometer, gyroscope, and other sensors stop working?
I ask because my auto-rotation stops working when I install xposed, and to me that's just an annoyance.
Click to expand...
Click to collapse
It's a known issue, it seems like it happens in all Oreo ROMs. We're still trying to find out the cause.

Ah thank you, I tested nearly every Oreo ROM and they do all seem to have this issue. Exceptions that I found, for anyone interested, OmniRom 8.1 doesn't seem to be affected by Xposed, and AndyYan's AospExtended20180329 build isn't affected either, for some reason, his AospEx20180330 build is affected by Xposed, rotation doesn't work when installed, and even more weird, rotation doesn't work at all with or without exposed in his AospEx20180404 build.

Related

Has anyone got a 5.1.1 ROM with WORKING rotation?

Title says it all.
I've tried numerous ROM's from moonlight, and they worked great up until recently where I cannot get rotation to work at all. I have instaled ColorOS 2.0 as a substrate package, but still doesnt work.
The previous ROM I used was moonlight's Blisspop port, because rotation worked. Then I stopped receiving mobile signal so I changed ROM. Now I have mobile signal, but no rotation.
Mokee also does not work, and they have open issues of this on their bug tracker, but no responses. So I assume they are ignoring it.
Prefer latest ROM's of course, but as long as rotation works I don't mind. Any help is appreciated.
Sorry to do this, but, bumping post. Lack of rotation is killing me. Using a manual rotation app just doesn't cut it.
Anyone have any idea on a way to 'fix' the issue? I assume it must be software based, seeing as it worked in previous ROMs. Definitely not hardware, as I am not the only one with the issue, according to the bug reports on MokeeDev tracker. Alternatively, it seems that it could be an issue with the Oppo firmware, as the issues reported are on various Oppo devices.
PS. Rotation works on older versions of Android. It is only an issue on Lollipop ROMs. I tested this with a ColorOS 2 ROM. Moonlight, the dev of the Lollipop ROMs says that for rotation to work you must first install ColorOS 2.0 as a substrate package. I did this, rotation worked fine. Booted to TWRP, wiped and installed Lollipop and rotation does not work.
Seriously need some help here guys, if anyone can provide any it would be greatly appreciated.
IAmOmicron said:
Sorry to do this, but, bumping post. Lack of rotation is killing me. Using a manual rotation app just doesn't cut it.
Anyone have any idea on a way to 'fix' the issue? I assume it must be software based, seeing as it worked in previous ROMs. Definitely not hardware, as I am not the only one with the issue, according to the bug reports on MokeeDev tracker. Alternatively, it seems that it could be an issue with the Oppo firmware, as the issues reported are on various Oppo devices.
PS. Rotation works on older versions of Android. It is only an issue on Lollipop ROMs. I tested this with a ColorOS 2 ROM. Moonlight, the dev of the Lollipop ROMs says that for rotation to work you must first install ColorOS 2.0 as a substrate package. I did this, rotation worked fine. Booted to TWRP, wiped and installed Lollipop and rotation does not work.
Seriously need some help here guys, if anyone can provide any it would be greatly appreciated.
Click to expand...
Click to collapse
Yes, same thing is happen to me when using lollipop.

Issue after xposed for nougat

I have tried different files available for download and facing same issue. Soon after i install xposed, the nav button do not respond... When locked finger print scanner works... Otherwise none of the 3 keys are working. Anyone facing same issue or is there any fix ir is it a known issue. Gets fixed on reboot, but again issue come up anytime...
kpmohamedhussain said:
I have tried different files available for download and facing same issue. Soon after i install xposed, the nav button do not respond... When locked finger print scanner works... Otherwise none of the 3 keys are working. Anyone facing same issue or is there any fix ir is it a known issue. Gets fixed on reboot, but again issue come up anytime...
Click to expand...
Click to collapse
There is no xposed for Nougat. What are you trying to install ?
EDIT: Nevermind, but it is unstable so things like that are to be expected
It s 100% unstable dont use it
Everything works fine, except this issue....
Then don't complain about it. You can't expect to be using something which is obviously unfinished, and not meant for Nougat, and ask for fixes.
wait a month atlst before it gets stable...... try any rom u want ..it will have issues coz its highly unstable...also modules not yet updated and will cause more issues and next thing u will complain after flashing xposed is ur battery life so keep in mind alwys before flashing xposed even on mm...
I am not complaining here, just wanted to know what others see with xposed for nougat and any fix if there is one, i flashed it knowing that it is unstable... Anyways thanks for ur comments...
kpmohamedhussain said:
I am not complaining here, just wanted to know what others see with xposed for nougat and any fix if there is one, i flashed it knowing that it is unstable... Anyways thanks for ur comments...
Click to expand...
Click to collapse
The best place for you to ask that would be the thread about it. Not many people really use xposed much any more. Mainly not with the roms available for this device. There is almost no need even for it.

Fingerprint scanner not working

I am facing this wired issue where my fingerprint scanner is not working even though my phone is encrypted. I have tried multiple roms since this issue had started but it hasn't helped me yet. Hope someone helps?. thanks for reading
I have the same issue I just switched ROMs as usual but this time my fingerprint scanner didn't work I'm on latest resurrection remix 8.1 rom
I have the same issue too. I reinstalled the latest stock Lenovo Rom and the fingerprint sensor started to work again. Unfortunately It stopped working while I was recording my fingerprint for the device locking. With a reboot the sensor restarted to work but now always stop responding after a couple of minutes. Rebooting the phone is the only (temporary) solution. It's not a software problem but (in my case) an hardware problem!
I have to live without fingerprint sensor.
Now i have this issue which my fingerprint seems that it only work on stock rom only and don't work on any other custom rom and that is not norma i used to work on RR 8.1 for two month without any issue it happened when i went for miui pro port rom and was working fine in it and broken when i got back to RR 8.1 again and worked again when i flashed stock rom deodexed so it's only work perfect on stock rom only can any one help me with that ?

Xposed for Mi Max 3

Apparently if one Deodex's a ROM, then Xposed SDK 27 will work (source).
I will donate $40 to someone who deodex's Xiaomi.eu 8.9.6 rom for me (Mi Max 3)
Their roms are deodexed by default
janot2007 said:
Their roms are deodexed by default
Click to expand...
Click to collapse
Thank you. I don't know why xposed doesn't work on Android 8.1
I wasn't able to launch it too
You can get xposed working on AOSP custom Oreo but can not on Miui Oreo now
Zanr Zij said:
You can get xposed working on AOSP custom Oreo but can not on Miui Oreo now
Click to expand...
Click to collapse
Are you using AOSP as your daily driver?
Main issues with AOSP?
Xiaomi.eu is flawless except for can't install xposed
cobram3 said:
Are you using AOSP as your daily driver?
Main issues with AOSP?
Xiaomi.eu is flawless except for can't install xposed
Click to expand...
Click to collapse
Main issues:
Bluetooth audio doesn't work at all for calls using non-phone apps, like Messenger, WhatsApp, Textnow, etc...
Manually brightness adjustment flickers (really badly), but can be fixed
Automatic brightness adjusts really slowly (1 tick of brightness per second it seems)
But Xposed works at least... I'm torn between Xposed and Bluetooth calls, because I use a data-only plan so I need to use non-phone apps to call people, and all my devices are wireless
Wondering if anyone has gotten Xposed working on MIUI 10? (Android 8.1)

Fix freezes front Gcam whit Kernel Overclock

It happens that I have installed a Kernel OC, KangarooX to be more specific, everything works fine except the front camera of the Google Cam that freezes.​
Oh yes, me too! But with PureCaf instead. It's strange because in the telegram group I seems to be the only person with this problem, and actually it never happen to me with previous version of the same kernel. I test kinda everything except a clean flash. The only thing I know for sure this is a hdr+ problem, if I turn it off cam work normally, and (at least for me) if I switch to front cam with hdr off and only then I turn it back on it will work fine. It's a really strange and unusual problem.
Some question, if you don't mind:
which firmware are you using?
which rom are you using?
do you use microG?
do you use some xposed modules? If yes, did you install the yahfa or the sandhook version, and which modules have you installed?
which magisk modules are you using, if any?
is your phone encrypted?
I flashed the latest firmware and I'm using the latest los from srfarias (and his latest purecaf too), I use microG, I installed Xposed YAHFA version and using xposed edge and xprivacylua, I'm using nanodroid and quickswitch magisk modules, my phone is encrypted.
Raven.95 said:
It happens that I have installed a Kernel OC, KangarooX to be more specific, everything works fine except the front camera of the Google Cam that freezes.​
Click to expand...
Click to collapse
Shadow 00 said:
Oh yes, me too! But with PureCaf instead. It's strange because in the telegram group I seems to be the only person with this problem, and actually it never happen to me with previous version of the same kernel. I test kinda everything except a clean flash. The only thing I know for sure this is a hdr+ problem, if I turn it off cam work normally, and (at least for me) if I switch to front cam with hdr off and only then I turn it back on it will work fine. It's a really strange and unusual problem.
Some question, if you don't mind:
which firmware are you using?
which rom are you using?
do you use microG?
do you use some xposed modules? If yes, did you install the yahfa or the sandhook version, and which modules have you installed?
which magisk modules are you using, if any?
is your phone encrypted?
I flashed the latest firmware and I'm using the latest los from srfarias (and his latest purecaf too), I use microG, I installed Xposed YAHFA version and using xposed edge and xprivacylua, I'm using nanodroid and quickswitch magisk modules, my phone is encrypted.
Click to expand...
Click to collapse
I had the same problem and I solved it by flashing latest Illusion kernel 5.8
--> https://github.com/akhilnarang/whyred/releases
EdoNINJA93 said:
I had the same problem and I solved it by flashing latest Illusion kernel 5.8
--> https://github.com/akhilnarang/whyred/releases
Click to expand...
Click to collapse
Yep, extended kernel do the job too, thanks. So it's really a kernel problem...

Categories

Resources