the phone updated while I was busy at work and is now not turning on
nick4nick said:
the phone updated while I was busy at work and is now not turning on
Click to expand...
Click to collapse
Same boat I was also at work busy phone updated and bam now I am brick. I even used Titanium backup to remove system updater and the thing STILL updated.
Can some one help us please
nick4nick good news! I am unbricked here's how:
First download the program from this thread: http://forum.xda-developers.com/showthread.php?t=1126354
It is a self extracting rar in non english (not sure the language), make sure to set your extract destination as mine wanted to install it in the Firefox directory.
Anyways...
If you need to install the drivers for your phone to recognize when you hold back and plug it in they are in the drivers folder just run the ggsetup-2.2.0.10.
If you already have those drivers ignore that then, and open the X10FlashTool file (I right clicked and ran as adminitrator) Click the Flash button and follow the steps. (It will say connect phone while holding back at this point DO NOT do it earlier than when it tells you or it will fail.)
Next it will run through some text about how it is flashing your phone etc, when it says to enable debugging blah blah blah you're done.
I unplugged my phone turned it on, got the SE screen, the android screen and was back on 2.3.2. It said "update failed" and I laughed because I clearly tried to stop it.
Last info, in the thread I started when I was in a panic too someone said we need to delete mobile care using titanium backup, I had just removed the updater portion which is not enough. Hopefully you get it working, good luck!
thanks !!!! i will try it
Evil-Eye ' you are my new friend ''''' THANKS
Sounds like it worked, good thing we avoided disaster.
hi guys
when u said u were bricked and now repaired?
is ur radio working or not?
Mine was simfree on o2 running "R800i_3.0.1.A.0.145_UK" , unlocked bootloader , over the air update killed my phone , after applying the fix in post one, and doing a complete wipe , everything seems fine , radio working and everything.
harlzden said:
hi guys
when u said u were bricked and now repaired?
is ur radio working or not?
Click to expand...
Click to collapse
My radio is working but I am getting insufficient space on device now wondering if that has anything to do with recovering from a brick. Basically I can't install anything from the market or update any apps.
Minds to getting insufficient space on device, but i do know that i have lots of space. We need help!!!
I'm terrified of this happening to me. I just got my phone and can't use rom manager to create a backup rom because clockwork has no xperia install. What can/should I do in advance?
Sent from my R800x using XDA App
OK I got fed up so here's what I did:
I relocked my bootloader and went COMPLETELY stock. That will fix the insufficient space, also I read you can just flash the tft but since I'm not that proficient at this since this is my first droid I just went 100% stock.
I updated to 2.3.3 to get that over with, then I re unlocked my bootloader redid the root, then I locked my bootloader again.
I decided to just keep the bootloader locked so I don't have to deal with the worries of not updating. However using Titanium backup and removing Mobile care will stop you from updating if you are insistent on never updating. Good luck to everyone, you can definitely get to where I am though. Rooted 2.3.3 locked bootloader and able to accept OTA updates from now on
Hi,
I had rooted my Xperia Arc with eroot 1.2 but then got a bit carried away and moved some files I shouldn't had moved to my sd card and my phone started showing some errors like telling me the keyboard app has stopped or android.com.phone process as stopped.
Since that was happening I had to use pc companion and restore the original firmware.
Now, everytime I try to root it with eroot it fails. Any idea way I am sticking to what the tutorials suggest.
As I couldn't do it that way, I used flashtool 0.9.10 and doomlord script and manage to root the phone but strangelly it revert to its original state where it had files missing and started giving me notices that the keyboard process and android.phone had to be stopped and I can use sms because of that. '
Any ideas on how to fix this or way this is happening?
Already went on CWM recovery and cleaned everything and flashed the firmware several times but everytime the phone is rooted it reverts to this problem almost if he had some sort of recovery point to go to.
With stock firmware from Sony, everything is fine.
New to this site so please do excuse me if there is already any thread on this, I think there isn't.
Please help, thanks!
Rooting again with Eroot. USB debugging on? Unknown sources turned on?
Which firmware are you actually trying to root?
You said you moved files to SDcard. What files? Did you try to move them back? If yes, did you set correct permissions (rw-r--r-- for apps)?
Someguyfromhell said:
Rooting again with Eroot. USB debugging on? Unknown sources turned on?
Which firmware are you actually trying to root?
You said you moved files to SDcard. What files? Did you try to move them back? If yes, did you set correct permissions (rw-r--r-- for apps)?
Click to expand...
Click to collapse
Well, when I rooted the first time with eroot I had usb debugging on, unknown sources turned on and it worked but not now.
I am trying to root firmware 4.1.B.0.587 I can root it if I flash the phone and use doomlords script but not sure why the phone after being rooted restores to the point he was in August, with missing files and all. Mind that after I screwed up in August, I re installed the original firmware 4.1.B.0.587 via pc companion and all got back to normal and unrooted.
When I moved the files to the sd I moved several and phone was working ok till the next reset, when it started displaying the same error messages as now after rooting so I am not sure what files I moved, but I would say, at leats something like the keyboard apk.
It says the process android.phone.com stopped working and the same for keyboard so I can't access sms.
For the time being, I used pc companion to reinstal firmware 4.1.B.0.587 and it works fine but every time I root it, same mistakes reappear.
Shouldn't all data on internal memory be erased when I flash the phone with firmware 4.1.B.0.587 using pc companion? So, why do this erros reapear when I root it?
Thanks
Hello guys. I am posting this thread because I rooted my LG G3 and everything was going fine until I saw a system update for my phone and I got it. Turns out that wasn't the smart thing to do and when the system update was finished, when I would try to go on SuperSU it wouldsay that my SU binaries were not up to date and that I would have to manually re-root my phone. When i go on the play store, it says "no connection" even with wi-fi on. I already tried to factory reset my phone the root is still there and since I can't access the play store I can't do most of the things some youtube videos show. Any idea on how to unroot my phone? I would really appreciate if you would show me a step by step process on how to fix this problem?
eddymontalvo said:
Hello guys. I am posting this thread because I rooted my LG G3 and everything was going fine until I saw a system update for my phone and I got it. Turns out that wasn't the smart thing to do and when the system update was finished, when I would try to go on SuperSU it wouldsay that my SU binaries were not up to date and that I would have to manually re-root my phone. When i go on the play store, it says "no connection" even with wi-fi on. I already tried to factory reset my phone the root is still there and since I can't access the play store I can't do most of the things some youtube videos show. Any idea on how to unroot my phone? I would really appreciate if you would show me a step by step process on how to fix this problem?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2799647
That guide is for all variants just follow the one for yours closely. I see this is your first post so I will tell you this before someone who isn't as nice comes along and says it: always search before starting a thread like this. This guide and many others have been available for months and are easily found with a quick Google or forum search. Also, just a word of advice, if you are rooting your phone and/or installing custom recoveries, do not ever take an over-the-air update. You could end up doing some serious damage to your phone that way. From your description of the problem though, it almost sounds as if you have screwed up your EFS partition since you have no WiFi (which is managed through the EFS as well as your IMEI # and other various cell tower connections and their corresponding information). If your EFS partition is shot and you didn't make a proper backup beforehand, then your phone is toast as far as wireless connectivity goes. Your EFS information is device specific so it cannot be obtained from anyone else or restored via the method I posted above. Good luck though man and hopefully it works after returning to stock. Let me know if you have any more specific questions you need help with.
Hey guys,
I really need to find at least the stock ROM for the new-ish Blu Advance 4.0L (model A010U), because the most recent OTA update unforgivingly bricked mine. Now I want to try to re-flash the stock ROM, but I am also open to custom ROMs, if there are any available. Please help me out! Thanks in advance
I am really surprised no one has replied yet, but again I am facing the same problem and I've been searching the Internet for one month now and I found absolutely nothing for this phone (specifically for version A010U).
So I am going to post a different question in the hopes that someone will read it and help us out:
I have two Blu Advance 4.0 L A010U phones, which are identical except for the color (white and green). They were manufactured a month apart one in 10/2015 and one in 9/2015.
Unfortunately after only a couple of months of light use and for no apparent reason (did not drop it, or wet it, etc) it started going through a boot loop. It will start, show the "bold like us" logo then restart again without making it to the operating system at all. Like I said I've been looking for over a month to find a ROM (stock or modded) to reflash but with no luck. Then I had an idea. Since I have the other identical phone that's working fine, is there a trick I can do using the working phone to create a ROM that I can use in my broken one. By the way, the non working phone will allow me to get into the recovery menu, but unfortunately nothing happens if I wipe the cache or even if I reset to factory defaults.
Anyone knows what's causing that "boot loop", how to fix it and where to find a ROM or even "extract" or "create" one using a working Advance 4.0 L ???
Thank you very much!
Man I wish I knew. I'm kinda a novice. I have the same phone with a similar problem... I downloaded the recent ota update and the first time it said it couldn't unzip it. I tried again and it seemed to work but when it rebooted into recovery it said there was an error... So it won't boot up, it just goes to the screen that says "no command". I'm pretty sure the there's a way to make a copy of the working ROM but since I don't use a PC for anything I've never taken the time to learn the method.
Deuler93 said:
Hey guys,
I really need to find at least the stock ROM for the new-ish Blu Advance 4.0L (model A010U), because the most recent OTA update unforgivingly bricked mine. Now I want to try to re-flash the stock ROM, but I am also open to custom ROMs, if there are any available. Please help me out! Thanks in advance
Click to expand...
Click to collapse
I just got ahold of a couple of these devices myself and am in the process of going through all the in's and out's of them....I'm a Samsung nerd so I haven't messed with something like these in a while but I got one (that was supposedly dead bricked per the lady friend of mine I got them from) at least able to boot into factory mode and recovery via ADB and just as I'm posting this I'm in adb shell going through the device's internal memory.....so we'll see what all I find and can pull out of this one and possibly know enough to post an intelligible reply with solutions next time
The boot looping sounds like a common problem with these and when I get to that point I'm going to get rid of the stock bootanimation.zip ASAP and try something else. I get the idea that these things aren't exactly power houses built for much so the littlest thing or small bug in their coding could lead to this kind of crap happening.
Hopefully you figure yours out before I toss these out the window! lol
Cheers y salud!
---------- Post added at 02:27 AM ---------- Previous post was at 02:20 AM ----------
good.m. said:
Man I wish I knew. I'm kinda a novice. I have the same phone with a similar problem... I downloaded the recent ota update and the first time it said it couldn't unzip it. I tried again and it seemed to work but when it rebooted into recovery it said there was an error... So it won't boot up, it just goes to the screen that says "no command". I'm pretty sure the there's a way to make a copy of the working ROM but since I don't use a PC for anything I've never taken the time to learn the method.
Click to expand...
Click to collapse
Forgot to add a couple things about your post, sorry! I beleive (and I just started digging into this phone) that the no command part is the locked bootloader these phones appear to have. I think it was a combo of holding both volume buttons down from a powered off state then pressing power button on that came up with the option for factory mode or recovery (which led to the sad 'no command' droid), i went into factory mode and theres an option for Tp Upgrade which Im assuming is F/W or something similar but I just hooked up to the PC and in that mode it's reading the internal and external memory of the phone and that's about where I'm at so far.
Wow! I'm surprised this thread is still going.
Anywho, I found a repository that is storing the default ROM for the 4.0L. The files were just added recently. I would have liked to have seen a custom Lollipop ROM made by now, but this device is far too irrelevant to get any attention, unfortunately. Just root and forget, I guess.
I can't wait to try it, thank you! And btw, were you able to get root successfully and if so, how?
Deuler93 said:
Wow! I'm surprised this thread is still going.
Anywho, I found a repository that is storing the default ROM for the 4.0L. The files were just added recently. I would have liked to have seen a custom Lollipop ROM made by now, but this device is far too irrelevant to get any attention, unfortunately. Just root and forget, I guess.
Click to expand...
Click to collapse
Hey Deuler93 -
You have my respect for digging out that BLU ROMs link and sharing with the rest of us. I downloaded the one for my Advance and used SP flash tool to flash the phone that was stuck on a boot-loop. Of course first I had to download and install the MediaTeK drivers for USB connectivity with my PC. Everything worked flawlessly, no glitches what so ever. All these links are easily found and widely available online if anyone is interested I can share here too. I just hope that this boot-loop was due to some software glitch and not hardware failure. Everything seems to work fine for now, keepint my fingers crossed it will NOT happen again.
Well, one less headache to worry about. By the way we're not that far, if you're ever in the Chicago area, I owe you a beer or something. Thank you!
Hi guys !
Thank you very much for the Advance 4.0L Roms.
I have successfuly recovered my phone, but the IMEI got lost.
So, I need to root it in order to recover the IMEI, but I just can´t get success on any method :
Kingroot
Framaroot
Towelroot
is there another way to root it ?
Thank you very much.
I got temporary root using the kingroot apk. But it messed things up and I don't trust it anymore. None of the other mentioned methods worked for me either, maybe try the PC kingroot method
well this helps one thing
good.m. said:
Man I wish I knew. I'm kinda a novice. I have the same phone with a similar problem... I downloaded the recent ota update and the first time it said it couldn't unzip it. I tried again and it seemed to work but when it rebooted into recovery it said there was an error... So it won't boot up, it just goes to the screen that says "no command". I'm pretty sure the there's a way to make a copy of the working ROM but since I don't use a PC for anything I've never taken the time to learn the method.
Click to expand...
Click to collapse
umm. . . when the no command option comes up just press the power button and the rest of options will appear. doesnt exactly solve your problem however unless you have the ZIP file to install, which is what I'm looking for.
What might happen if a ROM is used for another blu phone. ??
A similar phone as well.
Plz advise.
Damn! This thread just keeps going!
I haven't even looked here in a while, so I will bunch my commentary here. I'm also salaried now, so I bought into a OnePlus X (onyx), a more expensive cheapo device, so I do not use the 4.0L anymore.
As for rooting tools, I used the Kingroot APK successfully in the stock environment. I never tried flashing something SuperSU myself, but it could work. Is flashing a SU app possible from the fastboot interface?
And to Steve's question - it is technically possible to flash a ROM for a different device onto your own device, but is considered a bad idea due to the possibility of introducing incompatibilities and missing proprietary requirements. I feel like this would hold especially true to stock ROMs because the manufacturer probably has no interest in supporting anything more than the device that they are manufacturing for. Doing so removes many possible "compatibility" issues from even having to be considered, but I digress. In short, try to find a ROM made for your device and your device only.
Did you find the zip file for the recovery
Marya Wynter said:
umm. . . when the no command option comes up just press the power button and the rest of options will appear. doesnt exactly solve your problem however unless you have the ZIP file to install, which is what I'm looking for.
Click to expand...
Click to collapse
i root my blu advance 4.0l a010u with the kingoroot PC apk, but i got some issues with the lock screen and some apps, so, i need some advice..
i was looking for a zip to use it via recovery but i can't find any..
Recover IMEI
srspinho said:
Hi guys !
Thank you very much for the Advance 4.0L Roms.
I have successfuly recovered my phone, but the IMEI got lost.
So, I need to root it in order to recover the IMEI, but I just can´t get success on any method :
Kingroot
Framaroot
Towelroot
is there another way to root it ?
Thank you very much.
Click to expand...
Click to collapse
You dont need root to recover imei all you have to do is type *#*#84666364#*#* in your dialer and you will be entered in EngineerMode then go into connectivity ,CDS information and radio information phone 1 or 2 then you will see AT+ type something eg.A then backspace and select the first thing you see. Put a space after AT+ and then put you imei code here "IMEI" between these "" You can find your imei by removing your battery it willl be there. After sending command reboot and imei is back.
links are down....check this instead
Hey guys, links here seems to be down .
Maybe this link would be useful for you all... stock firmware can be downloaded and useful help on videos is available too... Enjoy
Hi,
i'm running Android 2.3.7. on my Sony Xperia S LT26i, and despite all the advice and directions i've gotten here (Installing flashtool and downloading the jellybean firmware and following all the step by step guides) it still doesn't seem to work.
My phone responds to NOTHING i've done so far exepting for 2 things...
1. Kingroot no longer pops up when i launch a new app. I think i have successfully disabled it. But i'm still unable to update the binary for Supersu, so it still isn't working like i suspect it should.
2. My phone shut down and refused to switch back on for about 3hrs or more.
One thing noteworthy thing is that Flashtool will not recognize the Jellybean firmware i downloaded from the links i get here, or any other firmware i found for my phone and downloaded. Even though i put it in the c/flashtool/firmware folder as instructed.
Please help me.