Disclaimer: not tech savvy when it comes to android
So, i tried to use an OTA update from Lineage to update to the latest version. I tried to let it go by itself, without going into TWRP and flashing it manually. Now its stuck in a loop of the lineage boot animation, and i cant load into TWRP. Any ideas? Can i flash a rom from a usb connection to a pc, and how would i go about that?
Im using an shg-m919
Download the latest stock ROM from sammobile.com and flash it using Odin. Make sure you factory reset before booting the phone after flashing the stock ROM.
Related
Hi! I have encountered a problem, and really hope someone can help me!
Two days ago i flashed Omnirom Nightly on my n7105 to get Android 4.4. I was running cmw recovery but couldnt get the ota updates to work, so i was trying to flash open recovery instead. I used an apk that was supposed to install a script.
When i rebootet my phone, all i could get was the Note 2 boot image. It wont boot into recovery mode, or the rom. I am however able to boot into download mode.
Custom Binary download: Yes (4 counts).
Current binary: Custom
System Status: Custom.
How should i proceed? I've already tried to reflash cwm recovery, which did work, but didnt solve the problem. I am currently downloading stock firmware, but the file is 1.2 GB so it will take i while. Figured i should ask here in the meanwhile.
I'm not an expert at Android at all, im just a guy enjoying having custom roms and playing around a little. I do know that there are a lot of very talented people in this forum, and i really hope someone can help me find a solution. I've been googling for hours, but cant find anything that seems to work for me / or i dont fully understand and wont risk try before someone approves it.
Thank you, Vetle
EDIT: Is it correct that i cant flash any custom rom trough Odin? Or could i just flash omnirom again trough Odin?
If i manage to flash the stock rom and the bootloop goes away, will everything go back to normal, so i can flash cmw again and then a custom rom again?
No custom rom can be flashed through odin, as most of them are zip cwm/twrp base.
When u can only go to download mode, an official firmware only can help u through odin.
Sent from SM-N9005 with xda-app
Thanks for the answer!
Yup, i have flashed a stock rom now and i got the stock recovery. Everything was working fine.
Then i proceeded to do a factory reset in the stock recovery and flashed cwm trough Odin. When it was done, it wouldnt let me into recovery again! I can still boot up the phone tough.
I've also tried Open recovery. CWM via Rom manager. Open Recovery trough Goo Manager... Still cant get recovery to work, the stock rom works tough.
Any ideas?
Okay, i tried to flash the stock rom again and installed Rom Manger.
It still showes TWRP and CWM under installed recovery and i guess these its these two who makes the problem.
My plan now is to figure out how to completely remove them. I've never done anything related to adb before, so i hope it possible to remove them in another way?
This is so weird. Somehow i managed to install CWM Touch via Rom Manager and it booted. When i choose reboot /pull battery it will only boot straight into CWM again. I tried to flash TWRP via Odin, wich sucseeds, but then it reboots into CWM again!
I am soo lost its almost funny!
EDIT: Since i could get into cwm now, i tried to flash omnirom, but it aborts and all i get is status 7...?
EDIT2: Latest now is that i suddenly managed to install TWRP via Odin, but i still cant install the latest omnirom, all it says is "updating partition details".
vetle666 said:
This is so weird. Somehow i managed to install CWM Touch via Rom Manager and it booted. When i choose reboot /pull battery it will only boot straight into CWM again. I tried to flash TWRP via Odin, wich sucseeds, but then it reboots into CWM again!
I am soo lost its almost funny!
EDIT: Since i could get into cwm now, i tried to flash omnirom, but it aborts and all i get is status 7...?
EDIT2: Latest now is that i suddenly managed to install TWRP via Odin, but i still cant install the latest omnirom, all it says is "updating partition details".
Click to expand...
Click to collapse
I had recovery problems in the last few days also.
Installed DN3 rom using philz recovery, because its capable of prepare the phone to a new rom in a easy way.
It all went fine until first reboot.
I had a recovery boot loop. All I could see were some buttons and then reboot again.
Like you I had download access and flashed philz with Odin, but no luck.
Installed twrp via Odin and all was fine, and flashed philz new version.
Then I had to flash a new kernel (to be able to access wifi) and it all started again. Now I'm back on twrp.
Let's see what happens on my next flash.
My suggestion is to flash the recovery, and if that's OK flash the rom and use it
Next time you need recovery get Odin to help, but not all the way from an original rom. Just the custom recovery.
But if you want to get rid of your strange recovery configuration, and you are not already on new 4.3 recovery(which in your case could explain some of the problems you had) , with knox, install an older original rom, 4.1, and make all the steps, root it, install a custom recovery, and from there the room you want.
Reading your path sorting this problem, that was what would do next
Best regards
No O/S - can only boot into download mode
I've got an interesting one. I was prepping my phone for selling, decided to clear out all the memory. Somehow I must have deleted more than I meant to b/c when I restarted the phone, it just hangs on the Samsung screen. I can get into download mode, but not into recovery and nothing ever loads. I tried at least one version of installing CWM but it doesnt look like I can boot into recovery even after the Odin install appears ok. Before the crash, I was running a modded 4.4.2 rom with the bootloader and other things that come with it. Is there anything I can do to get this thing up and running again?
Thanks!
I suggest you flash a custom recovery and CM10.2 to at least get the phone up and running so you can confirm the bootloader and modem on the phone before flashing anything. Flashing the wrong bootloader, modem, or bootloader/modem combintaion could hard brick the phone.
audit13 said:
I suggest you flash a custom recovery and CM10.2 to at least get the phone up and running so you can confirm the bootloader and modem on the phone before flashing anything. Flashing the wrong bootloader, modem, or bootloader/modem combintaion could hard brick the phone.
Click to expand...
Click to collapse
Thanks. I'm positive I was running 4.4.2 on the phone before I decided to turn it into a paperweight
Flashing a custom recovery would be the goal, problem is that I can't find a recovery that I can flash. I've tried the latest version of PhilZ Touch recovery and that doesnt seem to work. ODIN shows it as a good install but when I restart the phone, I can't get into recovery. So was hoping for some direction on a different way of going about it. Basically, had 4.4.2, now I can only get into Download mode...
Download the latest tar.md5 file from here: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
Open Odin, connect phone, uncheck everything except f.reset time. Flash Philz. When you see reset in the status windows, remove USB cable, pull battery, replace battery, boot into recovery, flash ROM.
There are different versions of the 4..4.2 so it is best to determine the exact bootloader.
Hello, my friend has a Ace 2 (GT-I8160) and he wanted me to try and install CM 11 on his phone. I managed to root it and install temporary CWM on it, however his version of CWM could not flash CM 11 ROM's because it was outdated. I Googled around and found a TWRP .img file that I decided to flash via ODIN (CWM couldn't flash any TWRP .zip files for some reason). Everything went perfectly fine with ODIN, however my friends phone could not go pass the Samsung logo, it would appear for a few seconds and then the screen would go black. He also couldn't go into recovery but he could go into Download mode. Thinking that it was a recovery problem, I managed to get a .img file of TWRP 2.8.6.0 by Chronomonochrome and flash that via ODIN. Still the same problem - phone won't go pass the logo, however it can go into recovery.
So, now the phone boots perfectly to Download mode and recovery - and it can do everything from the recovery, like making backups, wiping, etc, but it cannot boot to the OS itself. I still haven't flashed a custom ROM on his phone because he didn't have the ROM file on his phone at the time nor could be transfer it to his phone via his PC because of some driver issue.
I'm currently downloading I8160XXBN1 firmware from Samsung Updates to flash via ODIN and try to get his phone back into working state. However, I also planned on placing my SD Card (which has the CM rom and Gapps on it) into his phone and flashing a new, custom ROM instead of flashing the firmware.
Does anyone have any advice on what I should do? Should I flash official firmware via ODIN or just flash the ROM using the recovery?
Thanks in advance.
Hi, i'm having trouble flashing back to stock.
I've got the latest stock firmware from sammobile.
Using twrp to install it says missing META-INF as the firmware zip isn't made the same as custom firmware.
Adding the tar.md5 to ap in odin flashes the boot and recovery but goes extremely slow when it starts flashing system (left it 2 hours and it hadn't even got half way) I'm guessing that's not normal.
I took a backup with twrp before I started flashing in twrp which flashes fine but I get endless boot loop when trying to start it.
I've tried fastboot but it doesn't detect the tablet.
I've tried different usb ports, cables, different versions of odin and different stock firmware. I'm ready to throw it out the window.
One thing to note is the [P600][Touchwiz] Marshmallow Rom 20170622 works great but also boot loops when I turn it off and on again, I have to boot into twrp then choose reboot in there and then it boots ok, that doesn't work with my twrp backup though.
Anything I'm doing wrong?
Thanks.
Well for some reason after installing marshmallow rom again then installing my backup it boots fine, havn't a clue why it failed to boot the other 4 times.
Nope
Back to continuous boot loop after second reboot.
All I did was turned developer options off and it's boot looping again.
Flashed original stock boot.tar.md5 and recovery.tar.md5 then factory reset and wiped cache but still boot loops.
Is it because I flashed a Marshmallow custom rom so it so you can't downgrade to a lolipop rom even though it's stock? Boot loader changed? Kernel?
Mazert said:
Is it because I flashed a Marshmallow custom rom so it so you can't downgrade to a lolipop rom even though it's stock? Boot loader changed? Kernel?
Click to expand...
Click to collapse
I'm not quite sure what your problem is but you should be able to downgrade, I've done it before.
Try this guide first. I've had success with it.
If all goes well you can then try to flash your stock ROM. The one I've flashed successfully in the past is the one in this post.
Good luck!
You may need to repartition your system. Tick the repartition in Odin. **All data will be lost**
Sent from my SM-N915G using Tapatalk
Thanks, I followed the guide in that post and it flashed ok then I finally managed to flash the latest stock!
I am trying to re-install STOCK ROM on SM-T705. I was previously running Lineage OS 14 with TWRP Recovery.
Downloaded the Stock ROM and used ODIN to reinstall the ROM. On reboot, it first showed the android Logo restoring OS and then on reboot, is stuck on Samsung logo. The tablet vibrates periodically, but nothing happens. Have waited for couple of hours.
I encountered similar problem last time when installing Lineage OS. At that time, I got around this by flashing TWRP via ODIN. But I do want to go to Stock Recovery.
I can get the tablet back into ODIN mode.
Any help is most appreciated. My overall experience in installing ROM and Rooting, etc is very limited.
praveenvj said:
I am trying to re-install STOCK ROM on SM-T705. I was previously running Lineage OS 14 with TWRP Recovery.
Downloaded the Stock ROM and used ODIN to reinstall the ROM. On reboot, it first showed the android Logo restoring OS and then on reboot, is stuck on Samsung logo. The tablet vibrates periodically, but nothing happens. Have waited for couple of hours.
I encountered similar problem last time when installing Lineage OS. At that time, I got around this by flashing TWRP via ODIN. But I do want to go to Stock Recovery.
I can get the tablet back into ODIN mode.
Any help is most appreciated. My overall experience in installing ROM and Rooting, etc is very limited.
Click to expand...
Click to collapse
My SM-T700 was in same situation but i was able to fix it by re-flashing twrp then doing full data format, then after that format the cache partitions, then odin flash the factory firmware.
After doing that booted to the factory setup wizard. Hope this helps you out of your situation
Issue resolved. Please close the thread
I managed to fix the issue. I tried flashing another ROM from Sammobile and lower version of ODIN and did the patching and it started working. I guess had a bad ROM downloaded from SAMMOBILE.
This thread can be closed.