Every rom threads is being filled with people asking what to do with error 7. Same questions and same answers over and over.
The solution is simple and straightforward as below:
- Make sure you have latest TWRP.
- Make sure you have the right firmware.
All above can be downloaded if you look at 1st page of each rom threads. If not, go to Lineage 15.1 thread and get it from there.
Even with correct TWRP and firmware, you may still get error 7. In that case,
- Unmount (uncheck) System in TWRP.
I guarantee that those three will fix error 7 issues, especially the last part.
how to unmount twrp..?wrongly i deleted all data,caxhe system , and twrp cant install nothing, if i install linageos, it show error 7, if i instal an eui ZIP, it installs fastes (like 4 sec) and after boot to leeco logo...HELP.
error 7
Hello, I am new and french.
sorry for english do it by translator
I also have error 7 with los15.1 and I was in los14.1 before
I also tried the 3 methods but it did not work
I found on the internet a solution when you are sure to have the right rom
lineageosdownloads fix error 7
I can not link, I'm sorry again
so I looked for what was wrong with "META-INF »com» google »android» updater-script"
and that's the line that was not in the old rom
assert(leeco.verify_modem("2017-01-06 01:40:06") == "1");
I cleared this line and recompile and it works but I can not have the update
normal
who can tell me how it fits this line and how to fix thank you
---------- Post added at 08:04 PM ---------- Previous post was at 08:01 PM ----------
I deleted this line and it works but can not receive updates
who can tell me what this line is
and how to settle it thanks
---------- Post added at 08:14 PM ---------- Previous post was at 08:04 PM ----------
I bought it on grossoshop, 1year ago, there was 18s grossoshop rom I think and I went straight on los14.1
I'll have to put it back, put the 20s 26s
is it the bootlader that has changed? I am not an expert lol
it's not that I hope to help those who have x720
philourm2.0 said:
Hello, I am new and french.
sorry for english do it by translator
I also have error 7 with los15.1 and I was in los14.1 before
I also tried the 3 methods but it did not work
I found on the internet a solution when you are sure to have the right rom
lineageosdownloads fix error 7
I can not link, I'm sorry again
so I looked for what was wrong with "META-INF »com» google »android» updater-script"
and that's the line that was not in the old rom
assert(leeco.verify_modem("2017-01-06 01:40:06") == "1");
I cleared this line and recompile and it works but I can not have the update
normal
who can tell me how it fits this line and how to fix thank you
---------- Post added at 08:04 PM ---------- Previous post was at 08:01 PM ----------
I deleted this line and it works but can not receive updates
who can tell me what this line is
and how to settle it thanks
---------- Post added at 08:14 PM ---------- Previous post was at 08:04 PM ----------
I bought it on grossoshop, 1year ago, there was 18s grossoshop rom I think and I went straight on los14.1
I'll have to put it back, put the 20s 26s
is it the bootlader that has changed? I am not an expert lol
it's not that I hope to help those who have x720
Click to expand...
Click to collapse
Update your twrp.
Sent from my LEX727 using xda premium
mchlbenner said:
Update your twrp.
Sent from my LEX727 using xda premium
Click to expand...
Click to collapse
I have the newest Trwp (3.2.1-0 by codeworkx), installed 20s firmware from linage thread unmounted /system and still get error 7 (e1001). When i try to install a nougat or marshmallow based rom it either says system cant be unmounted (eventhough i did before) or says it was succesful, but i'm not able to boot. When trying to restore a backup i also cannot boot. Just the Leeco splash screen shows till it goes into recovery.
ok but I have twrp 3.2.1.0
give a trwp 3.1 or 3.0 and try los14.1
philourm2.0 said:
give a trwp 3.1 or 3.0 and try los14.1
Click to expand...
Click to collapse
When flashing LOS14.1 in twrp 3.0.2 it gets stuck at somewhere like 90% (Patching system image unconditionally)
Are you guys getting this error?
If you do update your firmware.
Go get it from codeworkx
Sent from my LEX727 using xda premium
Thanks for your help
I installed twrp-3.2.1-0-20180407-codeworkx-zl1 and still this error 7
it's the line
assert (leeco.verify_modem ("2017-01-06 01:40:06") == "1");
which makes me wrong if I delete it in meta-inf ok
in the forum lost15.1 official on xda, they say firmwaire 20s minimun in red
I have never been in official 20s it would not be that?
or find udapte.zip 20s x720
I can try to put back original, put back 3.2.1 trwp and flash for test
thanks
Storm, you're stuck in any case if I understood
try on the site grossoshop leeco the pro 3
there is an automatic tutorial to put in 18s grossoshop
nothing to lose
then you try los 14.1 ok
Fixed it
I actually got this: "E1001: Failed to update system image." followed by Error 7.
So, i don't know how but it just fixed itself. My ADB Drivers suddenly didn't work correctly and after reinstalling clockworkmods Universal ADB Driver it worked out of nowhere. It could also have been a false USB Port scince i also plugged my cable in somewhere else. Now I can flash anything without problems
Hope this helps...
problem solved my turn
for those who have an error 7 with oreo which is a problem identification
you need the firmwaire 20s minimum if you start the custom rom with 18s or 19s
and the solution and in the tutorial aicp 13
so it's not necessarily the trwp that's always the problem
but thanks for the help
I was having the same error 7.
I just reflashed to stock 20s and the problem was fixed
Ferdinantstr said:
how to unmount twrp..?wrongly i deleted all data,caxhe system , and twrp cant install nothing, if i install linageos, it show error 7, if i instal an eui ZIP, it installs fastes (like 4 sec) and after boot to leeco logo...HELP.
Click to expand...
Click to collapse
Same Here!!
millkyway4 said:
Same Here!![/QUOTE
Is this tread still alive?
Click to expand...
Click to collapse
I read through this post and couldn't get past the error 7 issue. I finally got it solved by updating TWRP to the latest version and then I could flash lineage15 via adb sideload. Thanks for another great, informative, thread from the people of XDA developers.
Related
Hi Everyone,
my p6 stuck on the logo (Huawei Logo).
I already installed TWRP v2.6.3.7
When I go to TWRP, reboot into System ...it said "No OS Installed!"
how can i do it?
Please help me..
Thanks
notwo said:
Hi Everyone,
my p6 stuck on the logo (Huawei Logo).
I already installed TWRP v2.6.3.7
When I go to TWRP, reboot into System ...it said "No OS Installed!"
how can i do it?
Please help me..
Thanks
Click to expand...
Click to collapse
Try following these instructions to reintall android http://forum.xda-developers.com/showpost.php?p=54717666&postcount=8
digijedi007 said:
Try following these instructions to reintall android http://forum.xda-developers.com/showpost.php?p=54717666&postcount=8
Click to expand...
Click to collapse
Thanks for help.
if u dun mind, can u upload these to dropbox? (in my area, mediafire is blocked )
http://www.mediafire.com/download/q0..._Stock.1.4.zip
http://www.mediafire.)com/download/z...g_Version).zip
I can't revert to stock recovery .. it stuck in waiting device (cuz i think usb debugging is not on)
My room is already on B510.
I think the problem (stuck on huawei logo and there is no os) occurs bcoz I accidentally wipe all data (Dalvik Cache, System, Cache, Custom Storage, Data, Internal Storage) via TWRP.
What can I do to install OS?
download this stock recovery first
http://www.androidfilehost.com/?fid=23252070760973625
^ after you download extract and rename it's file to recovery.img
then
If you can still access your twrp try rebooting in bootloader mode then>
use your adb /fastboot on pc
fastboot flash recovery recovery.img
then follow the instructions above for how to reinstall your android os
also to download those mediafire files try using http://onlineproxyfree.com/
also in the future when using twrp never format internal or external memory..
---------- Post added at 09:18 AM ---------- Previous post was at 09:08 AM ----------
also make sure you have adb drivers loaded? try this maybe http://adbdriver.com/upload/AdbDriverInstaller.exe
digijedi007 said:
download this stock recovery first
http://www.androidfilehost.com/?fid=23252070760973625
^ after you download extract and rename it's file to recovery.img
then
If you can still access your twrp try rebooting in bootloader mode then>
use your adb /fastboot on pc
fastboot flash recovery recovery.img
then follow the instructions above for how to reinstall your android os
also to download those mediafire files try using http://onlineproxyfree.com/
also in the future when using twrp never format internal or external memory..
---------- Post added at 09:18 AM ---------- Previous post was at 09:08 AM ----------
also make sure you have adb drivers loaded? try this maybe http://adbdriver.com/upload/AdbDriverInstaller.exe
Click to expand...
Click to collapse
Hello,
Thanks again bro. but i still have problems.
in CMD, when i typed "fastboot flash recovery recovery.img", it's still in waiting for device.
For "onlineproxyfree(dot)com", it's also blocked by FortiGuard Web Filtering.
Yeah.. I won't format internal / ext again
I already installed adb drivers to my laptop.
hmm try rebooting your phone directly into fastboot> hold vol- and power continuously till it boots in fastboot>plug phone back in> then try flashing the recovery again
also make sure to replace your drivers with the ones in the software i provided the link for, also remove any huawei pc sync or whatever the name of the pc software was, it sometimes clashes with adb
maybe try using tor for downloading from mediafire.
digijedi007 said:
hmm try rebooting your phone directly into fastboot> hold vol- and power continuously till it boots in fastboot>plug phone back in> then try flashing the recovery again
also make sure to replace your drivers with the ones in the software i provided the link for, also remove any huawei pc sync or whatever the name of the pc software was, it sometimes clashes with adb
maybe try using tor for downloading from mediafire.
Click to expand...
Click to collapse
still stuck in "waiting for device"
hmm i faced that issue too once, give me a few min let me check something
---------- Post added at 10:38 AM ---------- Previous post was at 10:35 AM ----------
Can you send me a screenshot of your device manager screen? ie goto control panel>admin tools>Computer management>Device manager, also are you using adb in your cmd command or are you using fastboot? Try adb devices and see if it shows a serial number,
also maybe try replacing your adb/device/fastboot (whatever device manager is picking your phone up as) with this driver http://download.clockworkmod.com/test/UniversalAdbDriverSetup6.msi
---------- Post added at 11:12 AM ---------- Previous post was at 10:38 AM ----------
If you are still stuck maybe try reviewing steps here http://forum.xda-developers.com/ascend-p6/development/diy-rom-b510-based-add-want-t2843511
digijedi007 said:
hmm i faced that issue too once, give me a few min let me check something
---------- Post added at 10:38 AM ---------- Previous post was at 10:35 AM ----------
Can you send me a screenshot of your device manager screen? ie goto control panel>admin tools>Computer management>Device manager, also are you using adb in your cmd command or are you using fastboot? Try adb devices and see if it shows a serial number,
also maybe try replacing your adb/device/fastboot (whatever device manager is picking your phone up as) with this driver http://download.clockworkmod.com/test/UniversalAdbDriverSetup6.msi
---------- Post added at 11:12 AM ---------- Previous post was at 10:38 AM ----------
If you are still stuck maybe try reviewing steps here http://forum.xda-developers.com/ascend-p6/development/diy-rom-b510-based-add-want-t2843511
Click to expand...
Click to collapse
Thank you so much bro...
my phone now totally working
I done with twrp sideload for rom 513 from http://forum.xda-developers.com/showpost.php?p=54351633&postcount=1
What did you do differently this time ?
digijedi007 said:
What did you do differently this time ?
Click to expand...
Click to collapse
I tried different rom... mine doesn't include boot.img. just only update.app
oh ok, which do you have installed now? b513? also you can still use the mods posted on that thread to make the p6 much better
digijedi007 said:
oh ok, which do you have installed now? b513? also you can still use the mods posted on that thread to make the p6 much better
Click to expand...
Click to collapse
yeah.. B513.. thanks i now downloading tor browser to use mediafire..
Tq. I'll try them
btw, whz difference b/t 513 & 512.
need to update?
Actually not much aside from a few minor tweaks/improvements, which is why I am staying with b510 it's stable,works well,fast and it has everything i need.? Also check out the b510 link in my sig, if you want to see different root methods,and good apps.
---------- Post added at 12:24 PM ---------- Previous post was at 11:49 AM ----------
when you are finished installing the mods let me know what you think of them
digijedi007 said:
Actually not much aside from a few minor tweaks/improvements, which is why I am staying with b510 it's stable,works well,fast and it has everything i need.? Also check out the b510 link in my sig, if you want to see different root methods,and good apps.
---------- Post added at 12:24 PM ---------- Previous post was at 11:49 AM ----------
when you are finished installing the mods let me know what you think of them
Click to expand...
Click to collapse
sorry man.
I can't find any difference b/f and a/f
That is quite strange, try reflashing them, difference should be noticeable immediately.
plz help me����
I'm using huawei ascend p6 with emui 3.0 b708 with twrp recovery ...when I uninstalled xposed it told me to reboot ...I rebooted my phone but it was stuck at huawei logo .,..so I opened twrp recovery and cleared cache,delvik cage ,and system thinking it will fix my phone and then when tried to reboot it said os not installed do u want to reboot......I rebooted ....but now its stuck at huawei ascend logo ....so I researched and did exactly steps posted by digijedi007
http://forum.xda-developers.com/asce...-want-t2843511
I flashed the stock recovery but I'm having trouble installing b132 through force update it fails and the twrp recovery is gone plz help me plzplz
Sorry for the late reply, have you managed to successfully flash your device? Or are you still stuck
Good Day Everyone! I messed up with my Huawei P8 Lite ALE-L21 and now it is bricked. I installed TWRP recovery and accidentally reformatted everything without any backup. Now it got stuck at Huawei Logo and everytime I open TWRP, it says No OS installed when I reboot. Hope you can help me. Thanks in advance. :crying:
darkster24 said:
Good Day Everyone! I messed up with my Huawei P8 Lite ALE-L21 and now it is bricked. I installed TWRP recovery and accidentally reformatted everything without any backup. Now it got stuck at Huawei Logo and everytime I open TWRP, it says No OS installed when I reboot. Hope you can help me. Thanks in advance. :crying:
Click to expand...
Click to collapse
Download firmware from official website and extract it. Copy dload folder and paste it in sdcard. Now turn on your device by pressing volume up + volume down + power button. This will force install firmware in your phone.
Sent from my ALE-L21 using XDA-Developers mobile app
Long story short, little to no knowledge of phone related stuffs, I had my phone rooted and whatnot. Wanted to increase personalization and features, so I unlocked the bootloader, installed TWRP and tried flashing the CM nightly rom.
But after wiping everything, including the system partition, my Zenfone2 (ZE551ml WW version) simply refuses to flash anything zipped. It gives me the "E: Error executing updater binary in zip 'file name.zip'.
I tried flashing different TWRP images and it works. Can you guys guide me on how to restore my Zenfone 2 to its stock version? Apparently it refuses to flash any zip files, I am trying right now to flash the stock firmware provided by Asus but it gives me some error related to WW version and also the above error...
ADB sideload also doesn't work. Please guys help me, I am kind of desperate.
Flash through bootloader, read the thread for changing from CN to WW, it will give you complete instructions for flashing
Sent from my ASUS_Z00AD using Tapatalk
---------- Post added at 10:36 PM ---------- Previous post was at 10:34 PM ----------
Thread by vivid, I would post the link but can't copy the link from tapatalk
Sent from my ASUS_Z00AD using Tapatalk
I followed the guide here http://forum.xda-developers.com/zenfone2/help/how-to-upgrade-cn-version-to-ww-t3101556 but now my device is stuck on the "Asus in search of incredible" screen for like 30 minutes..
Hawtpants said:
I followed the guide here http://forum.xda-developers.com/zenfone2/help/how-to-upgrade-cn-version-to-ww-t3101556 but now my device is stuck on the "Asus in search of incredible" screen for like 30 minutes..
Click to expand...
Click to collapse
Select wipe data/factory reset, followed by wipe cache partition in recovery mode after performing adb sideload. Then, restart your phone. This worked for me.
Hi all,
I´m trying to root my nexus, but I´m finding it extremely difficult!
I was used to flash my devices very often in the past, and it was extremely easy. Can you please give me some information on how to root the nexus 7 (flo) running android 6.0.1?
Thanks in advance
er_arbe said:
Hi all,
I´m trying to root my nexus, but I´m finding it extremely difficult!
I was used to flash my devices very often in the past, and it was extremely easy. Can you please give me some information on how to root the nexus 7 (flo) running android 6.0.1?
Thanks in advance
Click to expand...
Click to collapse
Flash TWRP, boot it and install SuperSU...zip
Alternatively, use NRT to root N7.
Thank you very much k23m
k23m said:
Flash TWRP, boot it and install SuperSU...zip
Alternatively, use NRT to root N7.
Click to expand...
Click to collapse
Help
Hey guys,
Do you have a linux (ubuntu) step by step for dummies?
I'm new to this rooting thing and I feel like I need some help here. I've taken a look into the NRT tool, but it looks like it is windows only. Also, to flash TWRP it requires the tablet to be rooted. Kinda recursive..
Any help will be strongly appreciated
fbrubbo said:
Hey guys,
Do you have a linux (ubuntu) step by step for dummies?
... to flash TWRP it requires the tablet to be rooted. Kinda recursive..
Click to expand...
Click to collapse
I posted live Linux info before.
TWRP root req is only one of the options.
In fastboot mode (when off press power+vol.dn) do...
Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
fastboot flash recovery twrp.img
fastboot reboot
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
Click to expand...
Click to collapse
Then boot TWRP and install SuperSU...zip
Thanks man, but it didn't seem to work. I was able to flash TWRP after unloking the bootloader. The problema is that it gets restarting because it says "could not mount /data folder [...]" and many other red lines.
It is late here, I'll be trying a bit more tomorrow. If you have any more guidance, I will strongly appreciate.
Thanks a lot for your help
fbrubbo said:
Thanks man, but it didn't seem to work. I was able to flash TWRP after unloking the bootloader. The problema is that it gets restarting because it says "could not mount /data folder [...]" and many other red lines.
Click to expand...
Click to collapse
I think you were also flashing a ROM/OS at the same time. The following should fix it...
Code:
fastboot format cache
fastboot format userdata
Note, your data after unlocking is gone already, so do not worry about formatting the partition now.
Thanks dude. It works smoothly as it should be. Thanks to you. You saved some hours of my life for sure.
I was able to flash android 7.1 on my tablet. Right now I stuck on gapps because it says it does not enough storage. But when I start android and check the storage it says I'm using 5GB of 29GB.
Anyway, going to work. Will finish it tonight
---------- Post added at 10:51 AM ---------- Previous post was at 10:27 AM ----------
Just FYI.
I was able to install it following using MicroGApps option
Again.. thanks a lot for your help
Can we use an app like kingoroot to root？I am using Kingoroot and when I click the root button but everytime when it is 90%, the app automatically closed and when I reopened the app, it told me the device is not rooted.
---------- Post added at 05:19 AM ---------- Previous post was at 05:19 AM ----------
And my device is nexus 7.
---------- Post added at 05:20 AM ---------- Previous post was at 05:19 AM ----------
2013 version
I am having troubles rooting Nexus 7 (flo) running 6.0.1 with a dead USB port (apk only). Tried Kingroot and towelroot (v3), both would not work. I tried downloading an earlier version of towelroot (v1) but the app updates to v3 automatically (yes v3 uninstalled and cache cleared with restart). Love some solutions as I am totally lost. Thanks.
I am looking for some testers for my rom on Pixel XL, we currently have a build up on https://temp.bbqdroid.org/
It is a flashable zip and you should have a backup from twrp on your pc before flashing.
To keep TWRP you will likely need to flash ROM + Gapps, TWRP zip and then supersu.
Tester hangout: https://hangouts.google.com/group/5Ymr3GHPJdMUcf5j1
I'm getting page cannot be displayed.
pro_b said:
I'm getting page cannot be displayed.
Click to expand...
Click to collapse
Same here brother...I'm guessing we should give it a little more time?
pro_b said:
I'm getting page cannot be displayed.
Click to expand...
Click to collapse
BakedTator said:
Same here brother...I'm guessing we should give it a little more time?
Click to expand...
Click to collapse
sorry correct link is https://temp.bbqdroid.org
Thanks. Downloading now. I've been off the aosp scene for a while. Would anyone have a link to the gapps needed for this rom?
pro_b said:
Thanks. Downloading now. I've been off the aosp scene for a while. Would anyone have a link to the gapps needed for this rom?
Click to expand...
Click to collapse
Try opengapps aroma, 7.1 arm64, you may need to install webview, if you need further assistance there is a hangouts group https://hangouts.google.com/group/5Ymr3GHPJdMUcf5j1
mdalexca said:
Try opengapps aroma, 7.1 arm64, you may need to install webview, if you need further assistance there is a hangouts group https://hangouts.google.com/group/5Ymr3GHPJdMUcf5j1
Click to expand...
Click to collapse
Matt, will that flash in TWRP? Wasn't sure a payload OTA could be recovery flashed. At least not without modification of the script.
---------- Post added at 05:44 AM ---------- Previous post was at 05:26 AM ----------
pro_b said:
Thanks. Downloading now. I've been off the aosp scene for a while. Would anyone have a link to the gapps needed for this rom?
Click to expand...
Click to collapse
Just a heads up. I looked at the script and if you want to flash it , you'll need to adb sideload it as the script needs modification for TWRP.
How well does the build work? OMS Full? As on the 6P?
Or better asked, what does not work? I like the Rome on the N6P and would like to use it here but at the moment much work and no time to test. A short answer would be nice, thanks.
Tylog said:
How well does the build work? OMS Full? As on the 6P?
Or better asked, what does not work? I like the Rome on the N6P and would like to use it here but at the moment much work and no time to test. A short answer would be nice, thanks.
Click to expand...
Click to collapse
flash it and you will see
Sent from my Google Pixel XL using XDA Labs
I am working on a new build right now.
Ok:good:
Sent from my Pixel XL using XDA Labs
Will there be a pixel build?
freddienuxx said:
flash it and you will see
Click to expand...
Click to collapse
Read what I say and understand.
zaksimmermon said:
Will there be a pixel build?
Click to expand...
Click to collapse
Yeah, just getting marlin working first since I have the device
I tried flashing the zip in TWRP RC1 and there were no errors but TWRP says there is no OS installed.
Can't seem to get ADB sideload working on my computer to try that method.
---------- Post added at 03:30 PM ---------- Previous post was at 03:03 PM ----------
No OS installed after doing ADB sideload either.
HTML:
C:\Users\xx\AppData\Local\Android\sdk1\platform-tools>adb devices
List of devices attached
HTxxxxxxxxx sideload
C:\Users\xx\AppData\Local\Android\sdk1\platform-tools>adb sideload uber_marlin-2016-12-20.zip
Total xfer: 1.00x
C:\Users\xx\AppData\Local\Android\sdk1\platform-tools>
EDIT: My file size is only 215MB so I probably got a bad download. doh.
EDIT 2: Nope, re-downloaded and got same exact file size.
CZ Eddie said:
I tried flashing the zip in TWRP RC1 and there were no errors but TWRP says there is no OS installed.
Can't seem to get ADB sideload working on my computer to try that method.
---------- Post added at 03:30 PM ---------- Previous post was at 03:03 PM ----------
No OS installed after doing ADB sideload either.
HTML:
C:\Users\xx\AppData\Local\Android\sdk1\platform-tools>adb devices
List of devices attached
HTxxxxxxxxx sideload
C:\Users\xx\AppData\Local\Android\sdk1\platform-tools>adb sideload uber_marlin-2016-12-20.zip
Total xfer: 1.00x
C:\Users\xx\AppData\Local\Android\sdk1\platform-tools>
EDIT: My file size is only 215MB so I probably got a bad download. doh.
EDIT 2: Nope, re-downloaded and got same exact file size.
Click to expand...
Click to collapse
That's how TWRP always reads, it even has this problem with DU from what I read, I am working on a new build, I just need to upload it now
mdalexca said:
That's how TWRP always reads, it even has this problem with DU from what I read, I am working on a new build, I just need to upload it now
Click to expand...
Click to collapse
If you wipe system then flash the rom when you go to reboot it will say no OS installed. When you flash the rom it's flashing to the other partition so no need to wipe system and when you reboot it switches slots. If you just factory reset you won't get the no OS installed message.
Interesting.
Yeah, I did wipe /system.
Guys, its a bit ot but i had the following issue with installing DU on my sailfish:
I wiped System, data, Cache, flashed DU and so on... Then twrp said no OS installed. Ich accidentally rebooted system and did not reboot bootloader.
Screen turned off, hard brick because twrp (or what Else?) swapped boot partition to b (no bootloader installed).
As you can imagine, im pretty frightened to flash anything but weta rom for now on my new pixel (google rma...).
Is this caused by twrp, du or what?
blaze9090 said:
Guys, its a bit ot but i had the following issue with installing DU on my sailfish:
I wiped System, data, Cache, flashed DU and so on... Then twrp said no OS installed. Ich accidentally rebooted system and did not reboot bootloader.
Screen turned off, hard brick because twrp (or what Else?) swapped boot partition to b (no bootloader installed).
As you can imagine, im pretty frightened to flash anything but weta rom for now on my new pixel (google rma...).
Is this caused by twrp, du or what?
Click to expand...
Click to collapse
It's impolite to talk about an issue with DU in the thread dedicated for a totally different ROM.
You may want to post this question over in the TWRP thread.
In the Sailfish forum, btw. You're in the Marlin forum right now. lol
Hi, I updated this morning my CM 14.1 on my OnePlus3. No my phone isn't booting anymore. Even Recovery does not work. Only fastboot is available, but Bootloader-Version and Baseband-Version don't have any value. I allready tried flashing twrp again. Terminal on Computer says everything went fine, but I still can't boot in recovery...
Can anyone help me please?
Thanks allready.
Flash modified TWRP ( https://forum.xda-developers.com/devdb/project/dl/?id=21835 ) using fastboot.
Now you should be able to get into recovery.
Then when you're in recovery, flash a firmware package that's compatible with cm 14.1 ( https://forum.xda-developers.com/oneplus-3/how-to/radio-modem-collection-flashable-zips-t3468628 ) . I was going to attach a link but I can't find which one is supposed to be used, so look around for that :L When I flashed CM I had to use something like 3.2.8 but that might've changed. Good luck and hope this helps
---------- Post added at 15:05 ---------- Previous post was at 15:02 ----------
Also if these steps don't work use the unbrick tool from ( https://forums.oneplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/ ) which has saved my ass few times. You'll probably need method two. Make sure to follow the instructions carefully especially if you don't want to lose data.
Fastboot showing no values for baseband and bootloader is quite normal on Oneplus 3, atleast its the same behavior on mine and some videos on youtube i saw.
cohaolain said:
Flash modified TWRP ( https://forum.xda-developers.com/devdb/project/dl/?id=21835 ) using fastboot.
Now you should be able to get into recovery.
Then when you're in recovery, flash a firmware package that's compatible with cm 14.1 ( https://forum.xda-developers.com/oneplus-3/how-to/radio-modem-collection-flashable-zips-t3468628 ) . I was going to attach a link but I can't find which one is supposed to be used, so look around for that :L When I flashed CM I had to use something like 3.2.8 but that might've changed. Good luck and hope this helps
Also if these steps don't work use the unbrick tool from ( https://forums.oneplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/ ) which has saved my ass few times. You'll probably need method two. Make sure to follow the instructions carefully especially if you don't want to lose data.
Click to expand...
Click to collapse
Did it and was going back in Recovery. So I flashed lineageos, because of the end of CM, but everytime I boot, I get in recovery. Do I just need to add the firmware package? Thought it would work with a whole new System ...
---------- Post added at 15:05 ---------- Previous post was at 15:02 ----------
Or do I have to add the system partition in the mount setting in twrp?
GrayGhost93 said:
Did it and was going back in Recovery. So I flashed lineageos, because of the end of CM, but everytime I boot, I get in recovery. Do I just need to add the firmware package? Thought it would work with a whole new System ...
---------- Post added at 15:05 ---------- Previous post was at 15:02 ----------
Or do I have to add the system partition in the mount setting in twrp?
Click to expand...
Click to collapse
The mount setting won't make a difference. I dunno why you're getting into recovery..... It might be the firmware package. Ask around on your ROM's thread on here for which firmware package you should be using.