I am looking for some testers for my rom on Pixel XL, we currently have a build up on https://temp.bbqdroid.org/
It is a flashable zip and you should have a backup from twrp on your pc before flashing.
To keep TWRP you will likely need to flash ROM + Gapps, TWRP zip and then supersu.
Tester hangout: https://hangouts.google.com/group/5Ymr3GHPJdMUcf5j1
I'm getting page cannot be displayed.
pro_b said:
I'm getting page cannot be displayed.
Click to expand...
Click to collapse
Same here brother...I'm guessing we should give it a little more time?
pro_b said:
I'm getting page cannot be displayed.
Click to expand...
Click to collapse
BakedTator said:
Same here brother...I'm guessing we should give it a little more time?
Click to expand...
Click to collapse
sorry correct link is https://temp.bbqdroid.org
Thanks. Downloading now. I've been off the aosp scene for a while. Would anyone have a link to the gapps needed for this rom?
pro_b said:
Thanks. Downloading now. I've been off the aosp scene for a while. Would anyone have a link to the gapps needed for this rom?
Click to expand...
Click to collapse
Try opengapps aroma, 7.1 arm64, you may need to install webview, if you need further assistance there is a hangouts group https://hangouts.google.com/group/5Ymr3GHPJdMUcf5j1
mdalexca said:
Try opengapps aroma, 7.1 arm64, you may need to install webview, if you need further assistance there is a hangouts group https://hangouts.google.com/group/5Ymr3GHPJdMUcf5j1
Click to expand...
Click to collapse
Matt, will that flash in TWRP? Wasn't sure a payload OTA could be recovery flashed. At least not without modification of the script.
---------- Post added at 05:44 AM ---------- Previous post was at 05:26 AM ----------
pro_b said:
Thanks. Downloading now. I've been off the aosp scene for a while. Would anyone have a link to the gapps needed for this rom?
Click to expand...
Click to collapse
Just a heads up. I looked at the script and if you want to flash it , you'll need to adb sideload it as the script needs modification for TWRP.
How well does the build work? OMS Full? As on the 6P?
Or better asked, what does not work? I like the Rome on the N6P and would like to use it here but at the moment much work and no time to test. A short answer would be nice, thanks.
Tylog said:
How well does the build work? OMS Full? As on the 6P?
Or better asked, what does not work? I like the Rome on the N6P and would like to use it here but at the moment much work and no time to test. A short answer would be nice, thanks.
Click to expand...
Click to collapse
flash it and you will see
Sent from my Google Pixel XL using XDA Labs
I am working on a new build right now.
Ok:good:
Sent from my Pixel XL using XDA Labs
Will there be a pixel build?
freddienuxx said:
flash it and you will see
Click to expand...
Click to collapse
Read what I say and understand.
zaksimmermon said:
Will there be a pixel build?
Click to expand...
Click to collapse
Yeah, just getting marlin working first since I have the device
I tried flashing the zip in TWRP RC1 and there were no errors but TWRP says there is no OS installed.
Can't seem to get ADB sideload working on my computer to try that method.
---------- Post added at 03:30 PM ---------- Previous post was at 03:03 PM ----------
No OS installed after doing ADB sideload either.
HTML:
C:\Users\xx\AppData\Local\Android\sdk1\platform-tools>adb devices
List of devices attached
HTxxxxxxxxx sideload
C:\Users\xx\AppData\Local\Android\sdk1\platform-tools>adb sideload uber_marlin-2016-12-20.zip
Total xfer: 1.00x
C:\Users\xx\AppData\Local\Android\sdk1\platform-tools>
EDIT: My file size is only 215MB so I probably got a bad download. doh.
EDIT 2: Nope, re-downloaded and got same exact file size.
CZ Eddie said:
I tried flashing the zip in TWRP RC1 and there were no errors but TWRP says there is no OS installed.
Can't seem to get ADB sideload working on my computer to try that method.
---------- Post added at 03:30 PM ---------- Previous post was at 03:03 PM ----------
No OS installed after doing ADB sideload either.
HTML:
C:\Users\xx\AppData\Local\Android\sdk1\platform-tools>adb devices
List of devices attached
HTxxxxxxxxx sideload
C:\Users\xx\AppData\Local\Android\sdk1\platform-tools>adb sideload uber_marlin-2016-12-20.zip
Total xfer: 1.00x
C:\Users\xx\AppData\Local\Android\sdk1\platform-tools>
EDIT: My file size is only 215MB so I probably got a bad download. doh.
EDIT 2: Nope, re-downloaded and got same exact file size.
Click to expand...
Click to collapse
That's how TWRP always reads, it even has this problem with DU from what I read, I am working on a new build, I just need to upload it now
mdalexca said:
That's how TWRP always reads, it even has this problem with DU from what I read, I am working on a new build, I just need to upload it now
Click to expand...
Click to collapse
If you wipe system then flash the rom when you go to reboot it will say no OS installed. When you flash the rom it's flashing to the other partition so no need to wipe system and when you reboot it switches slots. If you just factory reset you won't get the no OS installed message.
Interesting.
Yeah, I did wipe /system.
Guys, its a bit ot but i had the following issue with installing DU on my sailfish:
I wiped System, data, Cache, flashed DU and so on... Then twrp said no OS installed. Ich accidentally rebooted system and did not reboot bootloader.
Screen turned off, hard brick because twrp (or what Else?) swapped boot partition to b (no bootloader installed).
As you can imagine, im pretty frightened to flash anything but weta rom for now on my new pixel (google rma...).
Is this caused by twrp, du or what?
blaze9090 said:
Guys, its a bit ot but i had the following issue with installing DU on my sailfish:
I wiped System, data, Cache, flashed DU and so on... Then twrp said no OS installed. Ich accidentally rebooted system and did not reboot bootloader.
Screen turned off, hard brick because twrp (or what Else?) swapped boot partition to b (no bootloader installed).
As you can imagine, im pretty frightened to flash anything but weta rom for now on my new pixel (google rma...).
Is this caused by twrp, du or what?
Click to expand...
Click to collapse
It's impolite to talk about an issue with DU in the thread dedicated for a totally different ROM.
You may want to post this question over in the TWRP thread.
In the Sailfish forum, btw. You're in the Marlin forum right now. lol
Related
Hi every one, does anyone have a file of MiUI 8.5.11 with Android P style? I've been looking everywhere, but all threads on MiUI forum are deleted, funkyhuawei's links are note active anymore
Hilus said:
Hi every one, does anyone have a file of MiUI 8.5.11 with Android P style? I've been looking everywhere, but all threads on MiUI forum are deleted, funkyhuawei's links are note active anymore
Click to expand...
Click to collapse
i got it from a site let me find the link again : http://space4.space/resources/official-mi-mix-2-global-nightly-rom-android-8-0-miui-9-x.3/
---------- Post added at 03:10 AM ---------- Previous post was at 02:33 AM ----------
BTW I'm on 8.4.24 how can I install the 8.5.11 without bootloader unlocked ??? And if I unlocked the bootloader by Xiaomi tool will it wipe all my data ??
Hilus said:
Hi every one, does anyone have a file of MiUI 8.5.11 with Android P style? I've been looking everywhere, but all threads on MiUI forum are deleted, funkyhuawei's links are note active anymore
Click to expand...
Click to collapse
Currently downloading, had to create an account on that Russian site.. Will upload to GoogleDrive and repost.
Edit: With my upload speed please expect it ready in about 10 hours
[Nanashi] said:
Currently downloading, had to create an account on that Russian site.. Will upload to GoogleDrive and repost.
Edit: With my upload speed please expect it ready in about 10 hours
Click to expand...
Click to collapse
Hahaha, thanks so much
Uploaded it to GDrive:
https://drive.google.com/open?id=1Ple1Qg9X7QMAXjqU0PKKf0J5TguK0QnJ
Hilus said:
Hahaha, thanks so much
Click to expand...
Click to collapse
No worries Looks like someone beat me to it. Here I am sitting with a 75% upload on my potato internet haha.
Just FYI the build is pretty buggy, things I've noticed so far is that opening quick settings animation can trip out a little bit and every now and then icons from the status bar go missing also search in the settings can crash the app. As expected from a first build of this new style, might be a dealbreaker for some but the new look is pretty sick so it shall stay on my device until the next developer build. :good: :good:
[Nanashi said:
;76522906]No worries Looks like someone beat me to it. Here I am sitting with a 75% upload on my potato internet haha.
Just FYI the build is pretty buggy, things I've noticed so far is that opening quick settings animation can trip out a little bit and every now and then icons from the status bar go missing also search in the settings can crash the app. As expected from a first build of this new style, might be a dealbreaker for some but the new look is pretty sick so it shall stay on my device until the next developer build. :good: :good:
Click to expand...
Click to collapse
What was the last rom you where on ? And did you dirty flash on TWRP or fast boot ?? Can you explain you're process please !! I'm on 8.4.24 bootlocked . Thx and also does the action of unlocking boot wipe data??
Should I install TWRP or just flashboot it, thx
Thanks man
I will unlock my bootloader and hopefully it will work
dangerousrun said:
What was the last rom you where on ? And did you dirty flash on TWRP or fast boot ?? Can you explain you're process please !! I'm on 8.4.24 bootlocked . Thx and also does the action of unlocking boot wipe data??
Should I install TWRP or just flashboot it, thx
Click to expand...
Click to collapse
Hey, I came from the latest developer ROM release from the official MIUI download site.
Used TWRP and did a clean flash after wiping literally everything possible twice. Getting access from Xiaomi to have the ability to unlock your bootloader does not wipe anything but does take up to 72 hours I believe. Unlocking the bootloader itself will wipe all your data and factory reset so if you're planning to flash a new ROM anyway then it's not a problem. I rarely use these nightly more experimental builds because they are less stable and I need to use TWRP which isn't much of a problem but the stable and developer released ROMs from the official MIUI download site are available as a fastboot version which you can flash with the Xiaomi Flash tool which fully wipes anything and everything from the phone and installs your MIUI ROM of choice as it were a new phone.
If you or anyone else uses Discord, feel free to hit me up on there. I have barely any status on this website but have been mucking around with ROMs for years. Kaji#4985
Has it face unlock feature?
I'm about to get Mi Mix 2 in my hands...
Adriano-A3 said:
Has it face unlock feature?
I'm about to get Mi Mix 2 in my hands...
Click to expand...
Click to collapse
No faceUnlock, little bug in setting when you use the search bar, less fluidity and google play not certified
For my use it's daily usable
Adriano-A3 said:
Has it face unlock feature?
I'm about to get Mi Mix 2 in my hands...
Click to expand...
Click to collapse
If you want face unlock you'll have to use Epic ROM or something of the sort.
Greetings, I have a problem, it is that when it finishes making the flash of the ROM it does not reboot the system it gets stuck in reboots to the recovery, someone can give me a hand ..
Thanks from Colombia
ronaldrenteria said:
Greetings, I have a problem, it is that when it finishes making the flash of the ROM it does not reboot the system it gets stuck in reboots to the recovery, someone can give me a hand ..
Thanks from Colombia
Click to expand...
Click to collapse
Hi there friend, what kind of flash are you doing? Dirty or clean. The chances are you need to wipe everything before this installation.
Also, what ROM are you coming from? If it's a version before Android 8.0 you may need to flash any of the official global oreo ROMs from the MIUI download site first which I would recommend doing the fastboot way (downloading fastboot version of the ROM and flashing with Xiaomi Flash Tool).
ronaldrenteria said:
Greetings, I have a problem, it is that when it finishes making the flash of the ROM it does not reboot the system it gets stuck in reboots to the recovery, someone can give me a hand ..
Thanks from Colombia
Click to expand...
Click to collapse
TWRP format data "yes"
Kaji said:
Hi there friend, what kind of flash are you doing? Dirty or clean. The chances are you need to wipe everything before this installation.
Also, what ROM are you coming from? If it's a version before Android 8.0 you may need to flash any of the official global oreo ROMs from the MIUI download site first which I would recommend doing the fastboot way (downloading fastboot version of the ROM and flashing with Xiaomi Flash Tool).
Click to expand...
Click to collapse
I will try to explain what I am doing.
1 - I'm in XIAOMI.EU
2 - I'm using TWRP
3 - I'm doing a complete Wipe of everything I have in the Phone
4 - I'm doing adb sideload
5 - Finish the Flash but at the time of restart returns to Recovery.
Where this error?
---------- Post added at 01:22 AM ---------- Previous post was at 01:22 AM ----------
Mackay53 said:
TWRP format data "yes"
Click to expand...
Click to collapse
I will try to explain what I am doing.
1 - I'm in XIAOMI.EU
2 - I'm using TWRP
3 - I'm doing a complete Wipe of everything I have in the Phone
4 - I'm doing adb sideload
5 - Finish the Flash but at the time of restart returns to Recovery.
Where this error?
ronaldrenteria said:
I will try to explain what I am doing.
1 - I'm in XIAOMI.EU
2 - I'm using TWRP
3 - I'm doing a complete Wipe of everything I have in the Phone
4 - I'm doing adb sideload
5 - Finish the Flash but at the time of restart returns to Recovery.
Where this error?
---------- Post added at 01:22 AM ---------- Previous post was at 01:22 AM ----------
I will try to explain what I am doing.
1 - I'm in XIAOMI.EU
2 - I'm using TWRP
3 - I'm doing a complete Wipe of everything I have in the Phone
4 - I'm doing adb sideload
5 - Finish the Flash but at the time of restart returns to Recovery.
Where this error?
Click to expand...
Click to collapse
I'm no expert but I recommend just flashing it in TWRP. Fastboot flash TWRP and boot to it, wipe everything...EVERYTHING, and then copy the zip across for this ROM then flash and reboot.
ronaldrenteria said:
I will try to explain what I am doing.
1 - I'm in XIAOMI.EU
2 - I'm using TWRP
3 - I'm doing a complete Wipe of everything I have in the Phone
4 - I'm doing adb sideload
5 - Finish the Flash but at the time of restart returns to Recovery.
Where this error?
---------- Post added at 01:22 AM ---------- Previous post was at 01:22 AM ----------
I will try to explain what I am doing.
1 - I'm in XIAOMI.EU
2 - I'm using TWRP
3 - I'm doing a complete Wipe of everything I have in the Phone
4 - I'm doing adb sideload
5 - Finish the Flash but at the time of restart returns to Recovery.
Where this error?
Click to expand...
Click to collapse
1. Use latest TWRP
2. Quick wipe
3. Flash rom
4. Factory reset
5. Boot
That's always worked for me for any rom whether it's custom or miui.
so I am doing it, but I can not make it walk, I have returned to Xiaomi.EU, the way I return to Xiaomi.EU is the same method I use for ROM 8.5.11.
Thank you.
---------- Post added at 12:41 PM ---------- Previous post was at 12:40 PM ----------
Kaji said:
I'm no expert but I recommend just flashing it in TWRP. Fastboot flash TWRP and boot to it, wipe everything...EVERYTHING, and then copy the zip across for this ROM then flash and reboot.
Click to expand...
Click to collapse
Mackay53 said:
1. Use latest TWRP
2. Quick wipe
3. Flash rom
4. Factory reset
5. Boot
That's always worked for me for any rom whether it's custom or miui.
Click to expand...
Click to collapse
so I am doing it, but I can not make it walk, I have returned to Xiaomi.EU, the way I return to Xiaomi.EU is the same method I use for ROM 8.5.11.
Thank you.
Can i flash it on device via update or i have to use TWRP? I am on unlocked mi Mix 2 with Oreo?
I want to share you a great twrp who support aroma installer.
Link:https://mega.nz/#!6MQxWIKa!ZuSMnC7DtXxh4R9Vb5hHMjRFFVk6kaCaHiodn5CSN3M
Blackghosthm said:
I want to share you a great twrp who support aroma installer.
Created by @Myself5.
Link:https://mega.nz/#!6MQxWIKa
Click to expand...
Click to collapse
You need a decryption key.
---------- Post added at 05:10 PM ---------- Previous post was at 04:27 PM ----------
Blackghosthm said:
I want to share you a great twrp who support aroma installer.
Created by @Myself5.
Link:https://mega.nz/#!6MQxWIKa!ZuSMnC7DtXxh4R9Vb5hHMjRFFVk6kaCaHiodn5CSN3M
Click to expand...
Click to collapse
What version of twrp is this?
Beetle84 said:
You need a decryption key.
---------- Post added at 05:10 PM ---------- Previous post was at 04:27 PM ----------
What version of twrp is this?
Click to expand...
Click to collapse
3.2.1 but not that version you can find in twrp.me
Blackghosthm said:
3.2.1 but not that version you can find in twrp.me
Click to expand...
Click to collapse
So how about you push your AROMA fix to the official TWRP trees that everyone can profit from it?
Also that image is certainly not created by me. It might be based on the official TWRP, but the way you put it is missleading IMO.
Myself5 said:
So how about you push your AROMA fix to the official TWRP trees that everyone can profit from it?
Also that image is certainly not created by me. It might be based on the official TWRP, but the way you put it is missleading IMO.
Click to expand...
Click to collapse
Ok, I removed your name.
Myself5 said:
So how about you push your AROMA fix to the official TWRP trees that everyone can profit from it?
Also that image is certainly not created by me. It might be based on the official TWRP, but the way you put it is missleading IMO.
Click to expand...
Click to collapse
More than likely from a Chinese site, possibly modified by @machao44
Beetle84 said:
More than likely from a Chinese site, possibly modified by @machao44
Click to expand...
Click to collapse
Yes,now I have the same idea but doesn't matter I didn't write it created by me,I don't think it have matter for developer because he didn't share the recovery in xda.
I still wouldn't mind if _whoever did it_ would push the fix to the TWRP repository.
Myself5 said:
I still wouldn't mind if _whoever did it_ would push the fix to the TWRP repository.
Click to expand...
Click to collapse
Will this affect all Xperias with 4.4 Kernel? Really happy that @Blackghosthm shared that with Me... Can't wait to push out some awesome AROMA Stuff again!
Thanks a lot to everyone who was involved! :angel:
Myself5 said:
I still wouldn't mind if _whoever did it_ would push the fix to the TWRP repository.
Click to expand...
Click to collapse
I believe it created by storm in xperi fix there are 2 twrp versions one of them is this twrp.
Also i heard in some post it created by storm.
heil Aroma!
@sToRm//
Can you shed any light on who made this?
Anyone tried the new official One? https://dl.twrp.me/maple/twrp-3.2.3-0-maple.img.html
Hi I am quite having a hard time figuring out how to install TWRP on my XZP dual global version.
I already flashed the latest firmware last August... I also tried to follow installing it through ADB using command prompt yet nothing did work... Is there someone out here who can help me with flashing TWRP... Thanks
I use in this moment the original 3.2.3-0 version.
Where's is the problem to install TWRP? enable adb, call adb during running phone and accept the PC all time.
If the bootloader unlocked,, boot in Fastmode (hold Volume up during connecting the USB cable with the PC) . Check the driver via fastboot devices, If you see the phone call fastboot flash revovery TWRP. img (if your TWRP version has the name "TWRP. img"). After that you can boot into TWRP
Excappare said:
Hi I am quite having a hard time figuring out how to install TWRP on my XZP dual global version.
I already flashed the latest firmware last August... I also tried to follow installing it through ADB using command prompt yet nothing did work... Is there someone out here who can help me with flashing TWRP... Thanks
Click to expand...
Click to collapse
You need to flash a kernel from a custom ROM first (like CarbonROM) in order to be able to boot from the recovery (FOTAKERNEL) partition. The stock kernels have recovery built-in and would use that instead of TWRP. You can get a CarbonROM kernel image (boot.img) from its flashable zip.
After flashing a custom kernel you can then flash the TWRP image via "fastboot flash recovery <recovery image>". You'll have to reboot the phone and follow the usual button combination (though I don't really know it's holding volume up or down) to access the recovery. Using "fastboot boot" will not work and it'll stuck on the Sony logo with the blue fastboot LED stay on.
I think twrp found from this thread,,you can check TWRP Folder,
,https://forum.xda-developers.com/showpost.php?p=78121448&postcount=4
I've also the Stock Kernel (Pie) on the phone and can reach TWRP without any problems : you must hold Power and Volume (up or down? Not sure in this moment) till you see TWRP on the Screen (around 6 Sec.) Maybe the screen switched off... Switch it on via short press via Power... That's all
Released android p treble who can port to our device? Or say how to install. (Sorry for English).
https://forum.xda-developers.com/pr...t/rom-android-p-developer-preview-t3816659:):)
virruss9072 said:
Released android p treble who can port to our device? Or say how to install. (Sorry for English).
https://forum.xda-developers.com/pr...t/rom-android-p-developer-preview-t3816659:):)
Click to expand...
Click to collapse
you must think that developers work for free
Haha, not gonna happen. Buy a new phone.
Sent from my Pixel 2 using Tapatalk
No need to port the rom, just install the files from the p gsi post and download the teammex's fix from this link: https://github.com/erfanoabdi/P_semiGSI/wiki/Moto-Z-Play
You have to decrypt your device, install Xperience rom, wipe system data dalvik and cache and then flash the p gsi, after that you have to mount vendor and flash the post _sgsi files and then you have to mount system and vendor again to flash teammex's fix. After that you have to reboot your device and install gms ( tinyurl.com/gmscore ) to fix play store.
tomy1802 said:
No need to port the rom, just install the files from the p gsi post and download the teammex's fix from this link: https://github.com/erfanoabdi/P_semiGSI/wiki/Moto-Z-Play
You have to decrypt your device, install Xperience rom, wipe system data dalvik and cache and then flash the p gsi, after that you have to mount vendor and flash the post _sgsi files and then you have to mount system and vendor again to flash teammex's fix. After that you have to reboot your device and install gms ( tinyurl.com/gmscore ) to fix play store.
Click to expand...
Click to collapse
wow you can upload a tutorial on how to do it would be excellent for the community..!
_heberlopez95 said:
wow you can upload a tutorial on how to do it would be excellent for the community..!
Click to expand...
Click to collapse
At me all works as it is necessary, he wrote the instruction))
virruss9072 said:
At me all works as it is necessary, he wrote the instruction))
Click to expand...
Click to collapse
How buggy is it? Is it a daily driver? Does nfc work and Bluetooth?
did not manage to mount vendor, any solution?
How to root it by magisk?
---------- Post added at 06:30 PM ---------- Previous post was at 06:14 PM ----------
tomy1802 said:
No need to port the rom, just install the files from the p gsi post and download the teammex's fix from this link: https://github.com/erfanoabdi/P_semiGSI/wiki/Moto-Z-Play
You have to decrypt your device, install Xperience rom, wipe system data dalvik and cache and then flash the p gsi, after that you have to mount vendor and flash the post _sgsi files and then you have to mount system and vendor again to flash teammex's fix. After that you have to reboot your device and install gms ( tinyurl.com/gmscore ) to fix play store.
Click to expand...
Click to collapse
How to download the teammex's fix from this link: https://github.com/erfanoabdi/P_semiGSI/wiki/Moto-Z-Play?
How to root with magisk?
Turns off after a few seconds after booting on dp4, anyone else encountering this?
sillycat98 said:
Turns off after a few seconds after booting on dp4, anyone else encountering this?
Click to expand...
Click to collapse
DP4 is working fine, can't start either as camera
sillycat98 said:
Turns off after a few seconds after booting on dp4, anyone else encountering this?
Click to expand...
Click to collapse
Either you didn't decrypt your device or didn't install all post-gsi zips and the fix
Camarda said:
Either you didn't decrypt your device or didn't install all post-gsi zips and the fix
Click to expand...
Click to collapse
I did format internal storage to decrypt, flash all of the post zips, and flash the zip that teammex posted. Is that the fix you mean?
in moto z play, DP4 base experience does not work Bluetooth but if you open the camera in app, using the cosmic base press if Bluetooth works, but the camera in app does not start
tomy1802 said:
No need to port the rom, just install the files from the p gsi post and download the teammex's fix from this link: https://github.com/erfanoabdi/P_semiGSI/wiki/Moto-Z-Play
You have to decrypt your device, install Xperience rom, wipe system data dalvik and cache and then flash the p gsi, after that you have to mount vendor and flash the post _sgsi files and then you have to mount system and vendor again to flash teammex's fix. After that you have to reboot your device and install gms ( tinyurl.com/gmscore ) to fix play store.
Click to expand...
Click to collapse
How do I decrypt my data? I wiped it all and userdata. Nothing. I cant seem to flash the fix, I downloaded a file that says master from that git. Did I get it right?
Thanks
EspElement said:
How do I decrypt my data? I wiped it all and userdata. Nothing. I cant seem to flash the fix, I downloaded a file that says master from that git. Did I get it right?
Thanks
Click to expand...
Click to collapse
The fix by TeamMex doesn't want to flash when I try it it says zip format is not expected or something and fails. I tried mounting system and vender and either by themselves. Tried rebooting TWRP as well.
EspElement said:
The fix by TeamMex doesn't want to flash when I try it it says zip format is not expected or something and fails. I tried mounting system and vender and either by themselves. Tried rebooting TWRP as well.
Click to expand...
Click to collapse
Maybe I am not getting the right file. I go to that side, then click code, and click clone or download. Is this right? I get a file called P_semiGSI-master.zip
After dp4 its not needed anymore
when it starts it just shuts down and returns to recovery, help!
already install Flash privapp-permissions fix and it still does not work
---------- Post added at 07:06 AM ---------- Previous post was at 07:02 AM ----------
I have installed the original system, it does not have passwords, it keeps appearing to start the android device, I have to enter my password, what do I do?
virruss9072 said:
At me all works as it is necessary, he wrote the instruction))
Click to expand...
Click to collapse
I was grateful if you could do a tutorial, I can not do the decryption, there's no time to do it, please help me
I don't have this phone and don't have a way to test this. I have a working model for the OnePlus 6 but that doesn't mean it will work on the 6T. It is firmware specific. First one is based off the 9.0.14 34 OTA. Second one, beta OB9 41 OTA.
Flash in TWRP but it will show up as a module in magisk manager. Unzip this zip onto your internal sdcard. Boot into TWRP and find that folder. You must flash the base first. While still in TWRP, go back to the folder and one at a time, flash anything you might be interested in. Nothing is installed until at the end when you are done and you flash the "complete installation" zip.
If you want 3Minit battery you must install the minitbatteryresources.apk prior to booting into TWRP and installing the 3minit battery mod. Battery text options remove the battery and leave battery percent only. The text will always be white, however, unless the phone is charging (then the text turns green).
If interested in trying, have a backup. If your phone bootloops and boots to TWRP, you can always use TWRP file manager to delete the module (Tulsadiver Mods), then reboot. Module's found on the root drive of your phone in the data/adb/modules folder. Mount system first. You have to delete each apk in the module.
If anyone trys this, please provide feedback so others can know if it works for you or not.
Zip 9.0.15 OTA 34
https://www.androidfilehost.com/?fid=6006931924117921877
Zip 9.0.14 OTA 34
https://www.androidfilehost.com/?fid=6006931924117899934
Zip OB9 OTA 41
https://www.androidfilehost.com/?fid=6006931924117900314
I uploaded a beta version. Beta versions have been problematic but I did get some working on the OnePlus 6.
Both zips not working. See screenshot. Maybe I do something wrong?
Glassertje said:
Both zips not working. See screenshot. Maybe I do something wrong?
Click to expand...
Click to collapse
apparently you didnt read the 1st post
i'd suggest you fully read the 1st post not just d/l and try to flash something that isnt flashable but contains many flashable zips
Glassertje said:
Both zips not working. See screenshot. Maybe I do something wrong?
Click to expand...
Click to collapse
As @OvrDriVE stated, the entire zip folder cannot be flashed. It is not an aroma installer but is similar in that you make the selections you want before you finalize the installation. Once unzipped, for example, into a folder called OnePlus6T it would look like this.
Go to the bases folder and flash the standardbase.
Hit the back button (in TWRP), and go back to the folder. Say you want 3Minit battery. Open battery folder and flash 3Minit.
Hit back button again. If done, open complete installation folder and flash that zip. Only then do you choose to reboot your phone and the installation will be complete.
Am on 9.0.5 rooted.
Shud I try it or stay away ?
Kovhl said:
Am on 9.0.5 rooted.
Shud I try it or stay away ?
Click to expand...
Click to collapse
Firmware specific. What are you interested in? I don't see a 9.0.5 for the 6T.
Tulsadiver said:
Firmware specific. What are you interested in? I don't see a 9.0.5 for the 6T.
Click to expand...
Click to collapse
Ok thank u.. I won't install.
Am interested in ur app only.
I have 6T with 9.0.5 only.
Kovhl said:
Ok thank u.. I won't install.
Am interested in ur app only.
I have 6T with 9.0.5 only.
Click to expand...
Click to collapse
If you will give me a link to your firmware I'll look but like I said, I didn't find one by that number for the 6t, just the 6.
Tulsadiver said:
If you will give me a link to your firmware I'll look but like I said, I didn't find one by that number for the 6t, just the 6.
Click to expand...
Click to collapse
It is 9.0.15 I too would very much like to have this MOD for that firmware..... Thanks in advance sir!
Paul
prosaschi said:
It is 9.0.15 I too would very much like to have this MOD for that firmware..... Thanks in advance sir!
Paul
Click to expand...
Click to collapse
Here's one to try.
https://www.androidfilehost.com/?fid=6006931924117921877
Tulsadiver said:
Here's one to try.
https://www.androidfilehost.com/?fid=6006931924117921877
Click to expand...
Click to collapse
Thanks! I'll give it a try!
---------- Post added at 10:33 AM ---------- Previous post was at 10:10 AM ----------
prosaschi said:
Thanks! I'll give it a try!
Click to expand...
Click to collapse
It says invalid zip format.... Maybe im doing something wrong?
prosaschi said:
Thanks! I'll give it a try!
---------- Post added at 10:33 AM ---------- Previous post was at 10:10 AM ----------
It says invalid zip format.... Maybe im doing something wrong?
Click to expand...
Click to collapse
Read the instructions in the op.
Tulsadiver said:
Read the instructions in the op.
Click to expand...
Click to collapse
Holy [email protected]#k I'm an idiot........ I am usually not this dumb.......
prosaschi said:
Holy [email protected]#k I'm an idiot........ I am usually not this dumb.......
Click to expand...
Click to collapse
No problem, you aren't the first to flash that zip and you won't be the last. ?
@Tulsadiver
Sooo I just flashed StandardBase.zip then whitecircle.zip and 1Completeinstallation.zip then reboot and I see starting boot animation and then Phone turn off...
Latest 9.015 . Clean instalation.
sebcio2804 said:
@Tulsadiver
Sooo I just flashed StandardBase.zip then whitecircle.zip and 1Completeinstallation.zip then reboot and I see starting boot animation and then Phone turn off...
Latest 9.015 . Clean instalation.
Click to expand...
Click to collapse
Did you flash them one at a time without stacking them in TWRP and without rebooting in between?
Tulsadiver said:
Did you flash them one at a time without stacking them in TWRP and without rebooting in between?
Click to expand...
Click to collapse
Yes.Always button back and without rebooting
---------- Post added at 07:08 PM ---------- Previous post was at 06:57 PM ----------
@Tulsadiver
I dont need to install MinitBatteryResources.apk?
sebcio2804 said:
Yes.Always button back and without rebooting
Click to expand...
Click to collapse
Normally I ask for a direct link to the firmware but I didn't this time. I'm also doing this for OnePlus 6. Maybe I got the firmwares mixed up. I'm downloading it again.
Minitbatteryresources.apk is only necessary for the 3 Minit mod, not the other batteries.
sebcio2804 said:
Yes.Always button back and without rebooting
---------- Post added at 07:08 PM ---------- Previous post was at 06:57 PM ----------
@Tulsadiver
I dont need to install MinitBatteryResources.apk?
Click to expand...
Click to collapse
Here's another try.
https://www.androidfilehost.com/?fid=6006931924117928235
Hey Guys,
I present you the Custom Rom for T830 :good: Clean, Fast, Smooth and will be updated in regular basis.
And as we say always "VOTE" and if you Vote Not working please take the time to explain. Thank you
Now V2.3
Credits:
Thank you to @sevsman that create this beautiful ROM, Incredible job making it so fast. I am only the tester and I am glad to be able to share with you all.
Thank you to @Mentalmuso for his great kernel Weta latest TF5
Thank you to @topjohnwu for Magisk
Thank you to the creator of the Encryption Disabler @ianmacd
As usual I am not responsible for any damage cause to your tablet flashing this ROM:angel:
Some advice for newbies:
DRIVERS
There is no way to use PC with USB cable and flash with ODIN if you have not intaled the Samsung Drivers, search for these with your PC browser
OEM UNLOCKING
Go to settings/ About tablet/ Software information/ press build number 7 times to activate DEV mod
Go bac to setting down Developer Options that now apear
Tick Unlock OEM Your tablet will reboot and wipe everything so backup
Redo all setup Finish it even update if needed
FORCE REBOOT
Press and hold 3 keys Power/ Vol+/ Vol-
RECOVERY MODE
Power off tablet
Press and hold Power/ Vol+
DOWNLOAD MODE
For me the only thing that works is is at the same time force reboot when tablet off and connect usb cable to computer.
FLASHING ANYTHING WITH ODIN
ROM:
Place AP in AP
CSC_CSC_xxxxx in CSC
Place BL in BL
TWRP
Untick reboot in second tab
Place TWRP in AP
CHECK IF YOU NEED TO FORMAT DATA IN RECOVERY MODE
Boot in recovery mode
Select install
Select Storage on the bottom
If internal is 0mb you need to format data before doing anything that will allow you to wipe or zip anything but will cleann all you have on the tablet so Backup before
ROM FEATURES
Stock TF5
Rooted with Magisk latest and Weta Kernel latest
Heavy Debloat, most of the stuff you can install with Playstore is gone + some unneeded Samsung and Google stuff. No Knox, No Bixby, no Kids stuff, No digital wellbeing, No Microsoft stuff. It could definitely be cleaner; well that's for next version with maybe some more tweaking on Google and Samsung to reinforce privacy and improve battery life. Give us your ideas.
For now you still get Samsung Account, Samsung Store, Samsung DEX, Samsung Notes, Google Account, Google Playstore and Google
If you want to debloat more install Debloater module in Magisk and run it from Termius (Playstore) Example I got rid of Samsung Video Player, My Files, and hide Phone and Message as I don't use these and my App screen has no more than 11 apps before installing what I need.
Also for some interesting tweaking follow this thread and get rid of all: https://forum.xda-developers.com/galaxy-tab-s4/how-to/tweak-tab-s4-debloat-root-plugins-t4088699 still work pretty good except XPosed (Too bad!), Proca and few others but to disable big brothers It works fine. This is a great thread by @doggydog2
How To Flash this Rom:
OEM SHOULD BE UNLOCKED. THERE IS NO WAY TO TO THE FOLLOWING WITHOUT THIS STEP.
You need TWRP Installed. You can use flashify if you are already rooted to flash the new TWRP. If you don't know how refer to this thread from Mentalmuso: https://forum.xda-developers.com/galaxy-tab-s4/development/recovery-twrp-3-3-0-sm-t83x-t3928278
Reboot in Recovery
Factory reset, Wipe all but SD, Format Data (Very Important) (YOU WILL BE LOSING ALL YOUR DATAS SO BACKUP WHAT YOU NEED)
Flash the Zip file
Flash Encryption Disabler for now https://forum.xda-developers.com/galaxy-tab-s4/development/recovery-twrp-3-3-0-sm-t83x-t3928278 Thread from Metalmuso, look in Android 10 forlder
Reboot
Finish setup
Update Google Apps
Update Samsung Apps
Launch Magisk and press OK , device will reboot
Enjoy!
If you need to pass ctsProfile to true, flash "[MODULE] MagiskHide Props Config - SafetyNet, prop edits" from here: https://forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-t3789228/post83146179 Downlaod magisk module,open termiux SU, Launch props select "2 Basic Autentification"
That doesnt fix Netflix in L1 even hidding Magisk. We wiill not implement that in the next update.
If you have issues with Bluetooth pairing not sticking after reboot go to Magisk, download module Bluetooth Library patcher 1.9 and install itin magisk, that will solve the issue.
Changes v2.3:
Fix /data not mounted
Fix Bluetooth not keeping devices BT after reboot
Downloads:
T830 v2.3
https://drive.google.com/file/d/10TPT-c9o_DNKZDUvshO2OQer6urVUwmc/view?usp=sharing
T835 v2.3
https://drive.google.com/file/d/1eqQkG-IgxIfK2FbItPqzu_Ujk4NHc0eR/view?usp=sharing
We need comments on T835 install please
For T835, I have 2 report that Iris detection is not working, that's need confirmation. It works perfectly for T830
Now with this ROM you don't need Odin after installing TWRP
Game add https://forum.xda-developers.com/attachment.php?attachmentid=5079465&d=1597424859
Please comment if you test it
Thanks
enotar
Beer Fund : https://www.paypal.me/ion513
Thanks looks interesting. Will this be available for the SM-T835? if so i will definitely like to try it out
A huge thanks to @ianmacd for the disabler because without it we'd all be in the can :good:
Here's v1 for the T835 and @enotar will update the first post later today.
https://drive.google.com/file/d/1A8YHmPy7zSEY8sOz8qE3Achl1qTmu3hA/view?usp=drivesdk
Sweet! Nice to see our Tabs have not been forgotten about. Look forward to giving this a try!
Google Drive folder T830 and link to T830 rom shared to all.
@enotar This is extremely exciting as I didn't think there'd be support like this for the Tab S4! I just have a question before I attempt this: Do I need to already be on Android 10 before flashing this rom or am I able to flash it from Android 9? I'm asking because I have the WETA Kernal + TWRP + Magisk installed, but on Android 9 (T830). Because of this, I'm not able to use system update to update to Android 10. If not, is there another way to flash this rom?
SavXL said:
@enotar This is extremely exciting as I didn't think there'd be support like this for the Tab S4! I just have a question before I attempt this: Do I need to already be on Android 10 before flashing this rom or am I able to flash it from Android 9? I'm asking because I have the WETA Kernal + TWRP + Magisk installed, but on Android 9 (T830). Because of this, I'm not able to use system update to update to Android 10. If not, is there another way to flash this rom?
Click to expand...
Click to collapse
ive used same combination, and upgrade method looks like this: flash frresh twrp 3406 img right from twrp, wipe everything from recovery, and flash this rom.
---------- Post added at 06:03 PM ---------- Previous post was at 06:02 PM ----------
found 1 bug:
if you use iris unlock, there are glitches instead of eyes reflections
shoonari said:
ive used same combination, and upgrade method looks like this: flash frresh twrp 3406 img right from twrp, wipe everything from recovery, and flash this rom.
---------- Post added at 06:03 PM ---------- Previous post was at 06:02 PM ----------
found 1 bug:
if you use iris unlock, there are glitches instead of eyes reflections
Click to expand...
Click to collapse
Can you explain more detailed as I have no issue here with Iris
And yes Android 10 is not needed just TWRP and BTW you need to come with something, 8, 9 or 10 to install TWRP
I will repeat myself do not wipe SD dont cross the box, you'll be very sad.
Sent from my SM-T830 using Tapatalk
enotar said:
Can you explain more detailed as I have no issue here with Iris
And yes Android 10 is not needed just TWRP and BTW you need to come with something, 8, 9 or 10 to install TWRP
I will repeat myself do not wipe SD dont cross the box, you'll be very sad.
Sent from my SM-T830 using Tapatalk
Click to expand...
Click to collapse
May I ask what BTW is?
This is how it looks for me(see attached file)
Moreover, i can't use intelligent scan, cause it says "can't open camera"
I thought this is because backup i used(who knows), but with second clean install everything is still the same
wings516 said:
May I ask what BTW is?
Click to expand...
Click to collapse
BTW = By the way.
---------- Post added at 05:17 PM ---------- Previous post was at 04:55 PM ----------
enotar said:
Hey Guys,
I present you the Custom Rom for T830 :good: Clean, Fast, Smooth and will be updated in regular basis.
Please comment if you test it
Thanks
enotar
Click to expand...
Click to collapse
Installation went so smoothly. Thank you for this excellent rendition of a debloated Stock ROM. I had a debloated version on my old Tab S2 tablet. So far so good. :good::good::good::good::good:
shoonari said:
This is how it looks for me(see attached file)
Moreover, i can't use intelligent scan, cause it says "can't open camera"
I thought this is because backup i used(who knows), but with second clean install everything is still the same
Click to expand...
Click to collapse
Strange, not getting that. Anyway I will review.
If this is not too much can you completly clean flash following OP please
Thank you
wings516 said:
May I ask what BTW is?
Click to expand...
Click to collapse
BTW means "by the way", it's not a file, lol. (Also I didn't see that someone mentioned this before me, sorry)
I keep getting "Failed to mount '/data' when I go to install... hmm... does anyone have any idea?
Currently running TWRP 3.4.0.4 and Android 9.0.1
Do I need to use a lower version of twrp?
I reboot, and I just get the bootloop now.
wings516 said:
I keep getting "Failed to mount '/data' when I go to install... hmm... does anyone have any idea?
Currently running TWRP 3.4.0.4 and Android 9.0.1
Do I need to use a lesser twrp?
Click to expand...
Click to collapse
You need to use TWRP 3.4.0-6 not -4 and this thread Post 2 step by step: https://forum.xda-developers.com/galaxy-tab-s4/development/recovery-twrp-3-3-0-sm-t83x-t3928278
Follow OP
Thank you
enotar said:
You need to use TWRP 3.4.0-6 not -4 and this thread Post 2 step by step: https://forum.xda-developers.com/galaxy-tab-s4/development/recovery-twrp-3-3-0-sm-t83x-t3928278
Follow OP
Thank you
Click to expand...
Click to collapse
Hmm ok, I upgraded to 3.4.0-6 and still the same error and bootloop. I flashed the image and not through ODIN to install it to recovery.
I will go through and install the WETA kernel and encryption disabler.
wings516 said:
Hmm ok, I upgraded to 3.4.0-6 and still the same error and bootloop. I flashed the image and not through ODIN to install it to recovery.
I will go through and install the WETA kernel and encryption disabler.
Click to expand...
Click to collapse
Just followthe steps and it will work.
enotar said:
Just followthe steps and it will work.
Click to expand...
Click to collapse
Followed exactly, but every operation I try to do be it wipe or install, I get "Failed to mount '/data' (Invalid argument)
I'm assuming there is a corruption in my /data and I need to reformat. I'll report back after.
wings516 said:
Followed exactly, but every operation I try to do be it wipe or install, I get "Failed to mount '/data' (Invalid argument)
I'm assuming there is a corruption in my /data and I need to reformat.
Click to expand...
Click to collapse
Well formating data is one of the steps of the thread to install TWRP
enotar said:
Strange, not getting that. Anyway I will review.
If this is not too much can you completly clean flash following OP please
Thank you
Click to expand...
Click to collapse
Unfortunately, that doesn't help: (
What i did:
Downloaded once again
Full wipes, thru menu and twrp
Totally clean install, even no accounts added
And still same issue...btw, 1st boot takes 17 minutes! It's it normal?
---------- Post added at 12:26 PM ---------- Previous post was at 12:08 PM ----------
Forgot to add: iris scan is working asis and unlocks a tablet, issue is that i see glitches in popup window (instead of eyes), and not working intelligent scan