Hi guys,Lets Describe the matter in few words.
In GsmArena(Screenshot Added) I can see the Frequency Of Cpu(big) is 4x1.4Ghz and The little one 2x1.8Ghz.
But Cpu-Z its showing totally reverse,also same into Kernel Auditor App and ElementalX.I'm using ElementalX Kernel..
Now,Is any way to reverse or fix Cpu frequency to there own place?
Thanks in Advance for any Solution ?
Related
hi friends..
i wanted to know what is the best vsel value for undervolting and at wat frequency
and normally which app is used to undervolt? SetXperia??
Undervolting is a bit trial and error, as what works for one phone or rom may not be perfect for another. Probably the best app is IncrediControl, use it to decrease the voltages gradually.
i normally do stability test before applying the voltage..so i just wanted the range of minimum voltage..can u pls provide this?
arpith.fbi said:
i normally do stability test before applying the voltage..so i just wanted the range of minimum voltage..can u pls provide this?
Click to expand...
Click to collapse
You don't have to set voltages permanently in IncrediControl.
Don't tick set on boot box. After boot voltages are back to normal if your stability is issue.
i am using setXperia for voltage control..if i change the value of voltage and click apply..will it be applied for use at the same time or at next boot? if i dont check [email protected] then how and when are the voltages applied?
When you tap apply voltage changes immediately.If you check apply at boot voltages are saved and applied to any boot.
oh.. i c..i m undervolting at [email protected] till [email protected] crashed below 1100..
wat about you guys?
Hi,
I got CM 10 FXP 137 installed on my Arc LT15i and everythings working well so I wanted to test overclocking capabilities.
In Settings>Performance>Processor I pushed the max CPU frequency up to 1.6 GHz but I am afraid of causing a damage.
Now my question is if someone knows how this frequency selection works.
Do I only change the frequency or is CPU Vcore auto-adjusted with it and if it is the case please explain me how I can manually adjust the both of them seperately.
I hope you can help me and understand my text (sorry for my english).
Luuuk4s said:
Hi,
I got CM 10 FXP 137 installed on my Arc LT15i and everythings working well so I wanted to test overclocking capabilities.
In Settings>Performance>Processor I pushed the max CPU frequency up to 1.6 GHz but I am afraid of causing a damage.
Now my question is if someone knows how this frequency selection works.
Do I only change the frequency or is CPU Vcore auto-adjusted with it and if it is the case please explain me how I can manually adjust the both of them seperately.
I hope you can help me and understand my text (sorry for my english).
Click to expand...
Click to collapse
The frequency, that it is working on CURRENTLY, depends on the CPU governor, that you have chosen.
http://forum.xda-developers.com/showthread.php?t=1369817 - This thread has info about some governors.
post it In Q/A
Thank you for your help.
I will search the thread and if there should be a question remaining i will post it in Q/A.
Hi guys!
I am having ROMToolbox and also STweaks installed, using Perseus kernel. Problem is, that the sliders to set the voltages make me crazy...
I am looking for something where I could set the undervolting steps for all CPU speeds a) as percentage (e.g. 10%, 20%) or in steps like -100 mV, -200mV) or as a direct value input. I hope you can suggest me something
Try SetCPU.
I couldn't evaluate from the screenshots on the PlayStore site, in what way the voltages can be set in SetCPU? Can someone explain or post a screenshot?
Just use the Voltages tab.
Martux76 said:
Hi guys!
I am having ROMToolbox and also STweaks installed, using Perseus kernel. Problem is, that the sliders to set the voltages make me crazy...
I am looking for something where I could set the undervolting steps for all CPU speeds a) as percentage (e.g. 10%, 20%) or in steps like -100 mV, -200mV) or as a direct value input. I hope you can suggest me something
Click to expand...
Click to collapse
ROMToolbox supports this already, in the kernel tweaks session. If you press menu, it has the option to lower/increase the voltage by 25mV. Hope this helps
nkvuong said:
ROMToolbox supports this already, in the kernel tweaks session. If you press menu, it has the option to lower/increase the voltage by 25mV. Hope this helps
Click to expand...
Click to collapse
Thanks! I just found that specific feature today That's indeed the most practical
Hello,
I have installed the monster v12 rom for my galaxy w and it is really great. However I like tinkering with my phone so I have found about this cpu tuner app which is basically a cpu governor. I tried it a bit and started wondering if if it might interfere with the built in cpu governor. I tried searching for an answer however I didn't find it. Could you please help me out?
Thanks!
getsumhax said:
Hello,
I have installed the monster v12 rom for my galaxy w and it is really great. However I like tinkering with my phone so I have found about this cpu tuner app which is basically a cpu governor. I tried it a bit and started wondering if if it might interfere with the built in cpu governor. I tried searching for an answer however I didn't find it. Could you please help me out?
Thanks!
Click to expand...
Click to collapse
Yes .
although if you go to settings >performance you can change some stuff (depends on the kernel you installed)
for good options for cpu governor use (smarta$$V2) for the i/o scheduler use (ROW) you can play like every game on your wonder !
i hope i helped you !
Cheers..
I think to found the problem that is the cause of battery drain.
I just asked you help to it, but watching with Battery Doctor i think that the cause is the second cpu core that is often at 1600-1700 mhz.
With app like Set Cpu i just tried to set the max frequency to 810-1024 ecc.. but it has effect only for the firts cpu.
How can i stop the second cpu ?
I am using S5 Proyect ROM with BrisK kernel 3.4.0
gian90t said:
I think to found the problem that is the cause of battery drain.
I just asked you help to it, but watching with Battery Doctor i think that the cause is the second cpu core that is often at 1600-1700 mhz.
With app like Set Cpu i just tried to set the max frequency to 810-1024 ecc.. but it has effect only for the firts cpu.
How can i stop the second cpu ?
I am using S5 Proyect ROM with BrisK kernel 3.4.0
Click to expand...
Click to collapse
Hi dude there is an app called CPU governor, is not in the play store but you can look for it on Google i think it could help you!:good::good: