if anyone is running on cynogen 12.1 rom please can you make a back up of the rom in twrp and upload it to google drive. Because i cant install any rom in twrp. twrp is showing error 20 . i tried whatever i could do . i dont want your data while backup. also only for N7505.
Hope anyone will help soon
ridhin said:
if anyone is running on cynogen 12.1 rom please can you make a back up of the rom in twrp and upload it to google drive. Because i cant install any rom in twrp. twrp is showing error 20 . i tried whatever i could do . i dont want your data while backup. also only for N7505.
Hope anyone will help soon
Click to expand...
Click to collapse
Sorry I don't have any backup files, but did you try to flash the stock rom using odin? Then reinstall root and twrp, obviously.
Merlin_99 said:
Sorry I don't have any backup files, but did you try to flash the stock rom using odin? Then reinstall root and twrp, obviously.
Click to expand...
Click to collapse
i have tried odin still no use . only restore from backup will work because i tried note rom v3 the note 5 rom. by amit anand.
ridhin said:
i have tried odin still no use . only restore from backup will work because i tried note rom v3 the note 5 rom. by amit anand.
Click to expand...
Click to collapse
It seems strange because when I make some disasters with my phone, to resolve it I always do all wipes (wipe data, cache, dalvik, internal storage...) except my sd-card, then I remove the phone's battery and boot in download mode to flash the samsung firmware with odin....
Merlin_99 said:
It seems strange because when I make some disasters with my phone, to resolve it I always do all wipes (wipe data, cache, dalvik, internal storage...) except my sd-card, then I remove the phone's battery and boot in download mode to flash the samsung firmware with odin....
Click to expand...
Click to collapse
Nop can you make a backup. Please
Related
i just created myself a problem...i went in TWRP and into wipe and did a formated.... i when i flash the ROMS everything is fine... booted up everything... the problem is when i turn my phone off and turn it back on the phone is stuck at the samsung galaxy s4 logos... can someone please help me solve this problem...
cloudi602 said:
i just created myself a problem...i went in TWRP and into wipe and did a formated.... i when i flash the ROMS everything is fine... booted up everything... the problem is when i turn my phone off and turn it back on the phone is stuck at the samsung galaxy s4 logos... can someone please help me solve this problem...
Click to expand...
Click to collapse
Try wiping cache partition and dalvik in recovery then reboot
richardlibeau said:
Try wiping cache partition and dalvik in recovery then reboot
Click to expand...
Click to collapse
I did it and it say failed to wipe...i also try to fix permission and it also failed...
after i formatted that when the problem started....
Please do not make multiple threads asking the same question. This belongs in the q and a where you asked it first.
Glad the problem is fixed!
Sent from my SGH-M919 using xda app-developers app
cloudi602 said:
I did it and it say failed to wipe...i also try to fix permission and it also failed...
after i formatted that when the problem started....
Click to expand...
Click to collapse
It's because you formatted your system and it has nothing to boot into now. A factory data reset should fix it.
richardlibeau said:
It's because you formatted your system and it has nothing to boot into now. A factory data reset should fix it.
Click to expand...
Click to collapse
If the system has been wiped a factory reset wont fix it. Its not like a factory reset re-installs what has been wiped
Sent from my SGH-M919 using xda app-developers app
cloudi602 said:
I did it and it say failed to wipe...i also try to fix permission and it also failed...
after i formatted that when the problem started....
Click to expand...
Click to collapse
If you have a cwm/twrp flashable rom on your internal/external sdcard or if you have
a nandroid back and if you still have access to get into CWM/TWRP recovery then
why not simply restore a backup or flash a rom?
If you don't have any backups or cwm/twrp flashable zip file roms in your phone
then simply remove the external sdcard and put it into an adaptor and plug it into
your computer, download a cwm/twrp flashable rom and copy it to the sdcard.
Then put the sdcard back in the phone, go into cwm/twrp recovery and flash it.
If you cannot get into cwm/twrp recovery for some god knows what reason you will need
to Odin flash the stock rom in download mode to get the phone running properly again.
Good luck with it!
Please read forum rules before posting
Questions and help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Misterjunky said:
If you have a cwm/twrp flashable rom on your internal/external sdcard or if you have
a nandroid back and if you still have access to get into CWM/TWRP recovery then
why not simply restore a backup or flash a rom?
If you don't have any backups or cwm/twrp flashable zip file roms in your phone
then simply remove the external sdcard and put it into an adaptor and plug it into
your computer, download a cwm/twrp flashable rom and copy it to the sdcard.
Then put the sdcard back in the phone, go into cwm/twrp recovery and flash it.
If you cannot get into cwm/twrp recovery for some god knows what reason you will need
to Odin flash the stock rom in download mode to get the phone running properly again.
Good luck with it!
Click to expand...
Click to collapse
you know it let me flash and everything...but once it done it failed to wipe cache and dilvic cache...but for the first boot up it fine everything work you know... once i turn off my phone or restarted it then it stuck at the samsung alaxy s4 boot logos.... and it doesn't do anything else....but it work now since i reinstalled twrp and it work fine now.....
cloudi602 said:
you know it let me flash and everything...but once it done it failed to wipe cache and dilvic cache...but for the first boot up it fine everything work you know... once i turn off my phone or restarted it then it stuck at the samsung alaxy s4 boot logos.... and it doesn't do anything else....but it work now since i reinstalled twrp and it work fine now.....
Click to expand...
Click to collapse
I have exactly the same problem... can you explain detailed what did you do?
fljotavik said:
I have exactly the same problem... can you explain detailed what did you do?
Click to expand...
Click to collapse
I did a format in WIPE and flash my rom... it let me boot into the phone and everything....it didn't let me wipe cache or delvic cache.... so i repeat it and reflash it... once it got into my phone i download goomanage and restalled twrp.... mine was 2.5.0.1 and there was an update version of twrp... so i install it again and my phone is working fine since then i don't know if it work for you but that what i did....
but once i restarted the phone it stuck at the samsung galxy s4 logos...
I have the same problem did you manage to fix it?
twiifm said:
I have the same problem did you manage to fix it?
Click to expand...
Click to collapse
i manage to fixed.... i have to return to stock and redo everything..... working good now.....
cloudi602 said:
i manage to fixed.... i have to return to stock and redo everything..... working good now.....
Click to expand...
Click to collapse
Did you use Odin to load stock firmware? I tried that but it didn't work. I think I need a pit file. Did you have one?
twiifm said:
Did you use Odin to load stock firmware? I tried that but it didn't work. I think I need a pit file. Did you have one?
Click to expand...
Click to collapse
Yes i used odin.....at first it didn't work for me...still stuck at the first boot.... but i went into stock recovery and did a factory reset and it work....then i have to rooted again and flash rom again working good now.. i still got the file just let me know if you needed it
http://forum.xda-developers.com/showthread.php?t=2267895
http://www.hotfile.com/dl/213469534/9ff06bd/M919UVUAMDL_M919TMBAMDL_TMB.zip.html
cloudi602 said:
Yes i used odin.....at first it didn't work for me...still stuck at the first boot.... but i went into stock recovery and did a factory reset and it work....then i have to rooted again and flash rom again working good now.. i still got the file just let me know if you needed it
http://forum.xda-developers.com/showthread.php?t=2267895
http://www.hotfile.com/dl/213469534/9ff06bd/M919UVUAMDL_M919TMBAMDL_TMB.zip.html
Click to expand...
Click to collapse
Whoo thanks man... flashed atleast 20 phones in the past, never thought will get stuck here
itsme_4ucz said:
Whoo thanks man... flashed atleast 20 phones in the past, never thought will get stuck here
Click to expand...
Click to collapse
I had the same problem ... I had to odin everything ...
Sent from my SGH-M919 using xda premium
JUSMEJOSE said:
I had the same problem ... I had to odin everything ...
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
any clue what to do when no matter what u odin or CWM flash it fails to boot past the "Samsung" screen? Im going insane over this? No type of wipe, cache wipe, format fystem, dalvik wipe or anything will seem to help. The problem arose suddenly
Android.Junkii said:
any clue what to do when no matter what u odin or CWM flash it fails to boot past the "Samsung" screen? Im going insane over this? No type of wipe, cache wipe, format fystem, dalvik wipe or anything will seem to help. The problem arose suddenly
Click to expand...
Click to collapse
im sure flash back to stock using odin ... everything will be back to normal ....
JUSMEJOSE said:
im sure flash back to stock using odin ... everything will be back to normal ....
Click to expand...
Click to collapse
Trying that as i type. Performed a wipe and reboot'd to DL mode for a stock odin flash. Not optimistic though
any reason why this WOULDNT work?
EDIT: No luck. Went past the samsung screen initially to android stock recovery to finish flash...once it rebooted back to stuck at samsung screen!
EDIT: SOLVED. checked Phone EFS Clear in ODIN...then flash stock. BREEZE
Hi,
Few months ago I rooted my Galaxy Wonder (Malaysia version) to CWM-based Recovery v6.0.3.4 and flashed to a Custom ROM. Now I wanted to flash back my phone back to Stock Rom because the Custom ROM is very battery consuming.
Now, when I try to flash the Stock ROM in CWM recovery.. the error shows "E: Can't open /sdcard/I8150DXLM3_I8150OLBD1_XME.zip (bad)" then Installation aborted. I tried to download a few Stock ROM from different sources but still give me the same error when I wanted to flash it in CWM Recovery.
Can anyone here please tell me how to solve this problem? Do I need to unroot my phone (flash back to Stock Recovery) before I can flash back to Stock ROM? If yes, how to flash back to Stock Recovery?
Your help is really appreciated. Thanks in advance. Hope to see you all to reply me
follow this http://forum.xda-developers.com/showthread.php?t=1467128
you're phone will be what you want
Keep on restarting and shows SAMSUNG logo only!
alfatoni said:
follow this http://forum.xda-developers.com/showthread.php?t=1467128
you're phone will be what you want
Click to expand...
Click to collapse
Now I follow the steps in the thread you given me by using Odin.. After the step <1> Close serial port and wait until rebooting..
My phone is keep on restarting and appear the SAMSUNG logo and never enter into android system! It seems like a another problem coming out? How to solve this problem now? :crying:
First start up takes up to 5 min.
But if you get bootloop, go to recovery and wipe data/factory reset
Sorry for my english
first, download your country stock rom
after download, extract this file
download odin and samsung usb driver
flashing frimware via ODIN, wait until succed, if stuck, go to recovery, wipe data and cache. finis
StephYee said:
Hi,
Few months ago I rooted my Galaxy Wonder (Malaysia version) to CWM-based Recovery v6.0.3.4 and flashed to a Custom ROM. Now I wanted to flash back my phone back to Stock Rom because the Custom ROM is very battery consuming.
Now, when I try to flash the Stock ROM in CWM recovery.. the error shows "E: Can't open /sdcard/I8150DXLM3_I8150OLBD1_XME.zip (bad)" then Installation aborted. I tried to download a few Stock ROM from different sources but still give me the same error when I wanted to flash it in CWM Recovery.
Can anyone here please tell me how to solve this problem? Do I need to unroot my phone (flash back to Stock Recovery) before I can flash back to Stock ROM? If yes, how to flash back to Stock Recovery?
Your help is really appreciated. Thanks in advance. Hope to see you all to reply me
Click to expand...
Click to collapse
You need to do a clean installation/ pristine. since it will leave some custom ROM files in ur internal storage. i always do (in CWM) wipe data / factory reset, format system and format /sdcard0 (internal storage) before installing any custom/ stock ROM.
dec0der said:
You need to do a clean installation/ pristine. since it will leave some custom ROM files in ur internal storage. i always do (in CWM) wipe data / factory reset, format system and format /sdcard0 (internal storage) before installing any custom/ stock ROM.
Click to expand...
Click to collapse
Yes! After I wipe data/factory reset and clean the cache, it works already! Thanksss guys! :laugh:
StephYee said:
Yes! After I wipe data/factory reset and clean the cache, it works already! Thanksss guys! :laugh:
Click to expand...
Click to collapse
keewl!
Hello,
I have a unique issue. I'm having a problem installing any custom rom on my t999 (tmobile). I have been using a custom rom for over a year. Always used TWRP. Started with Paranoid Android and for the last few months I've been using PAC-Man (nightly) roms. I was having gps lock issues, I decided to upgrade the modem to a leaked UVUEMJC, this fixed the gps lock issue. But after the reboot, I was stuck on bootloader screen. The only way I could get the rom to work was to backup the rom, flash the system and data, and after that, the rom would work until reboot. I did this a few times until it stopped working. My efs was corrupted, IMEI missing, To recover it, I went into download mode, and noticed in red Warranty bit =1. I used odin to flashed a rooted cf 4.3 samsung touchwiz rom (root66_TMO_T999UVUEMJC). All imei/efs issues were fixed. I decided to try installing a custom rom again, PAC-Man rom, it installed just fine, all EFS/IMEI info was intact, but at reboot, I got stuck on the CM bootlogo. This happens everytime. IF I recover a backup, it gets stuck on the boot logo. I'm using TWRP v2.6.3.
Anybody have any suggestions on how to fix this issue?
Thanks!
Install TWRP 2.6.3.1. Then take a Nandroid.
Next wipe /Data. Then flash your Custom Rom. Wipe Dalvik + Cache after the Flash. Reboot and report.
Perseus71 said:
Install TWRP 2.6.3.1. Then take a Nandroid.
Next wipe /Data. Then flash your Custom Rom. Wipe Dalvik + Cache after the Flash. Reboot and report.
Click to expand...
Click to collapse
Thanks for the reply Perseus71. I'll give it a shot!
acedik said:
Thanks for the reply Perseus71. I'll give it a shot!
Click to expand...
Click to collapse
Upgrading to the newest TWRP did the trick! Everything is working fine now. :good:
Thanks for the help!
I'm also having trouble flashing PAC-man.
SGH-T999LUVUBMK4
Factory reset everything, wiped SD card.
Tried latest TWRP and CWM.
Suggestions?
D
Donny Orbit said:
I'm also having trouble flashing PAC-man.
SGH-T999LUVUBMK4
Factory reset everything, wiped SD card.
Tried latest TWRP and CWM.
Suggestions?
D
Click to expand...
Click to collapse
You need to post info about the error
Sent from my SGH-M919 using Tapatalk
It says
E: Error executing updater binary in zip '/external
Error flashing zip '/external_sd/pac_d2tmo-night
I tried flashing the Rom that doc fixed specifically for the T999LTE for the CM10.1.2 also with no avail.
Same problem.
D
wipe Dalvik and Cache before trying the rom again. If
I have a big problem. I was runnig Ditto n3 rom but i had random reboots.
I decide to go back to my (restore)Omni rom and return was good but then ,bootloop.
I am not able to install any rom,i cant restore nothing.i try evrything,,,format sistem.,wipe dalvik ,cach but nothing.
Can you help me ,please???
Edit:I can go to the recovery or download mode ,i can flash any rom but get a BOOTLOOP.
Tnx
Anyone,please.
dzontra11 said:
I have a big problem. I was runnig Ditto n3 rom but i had random reboots.
I decide to go back to my (restore)Omni rom and return was good but then ,bootloop.
I am not able to install any rom,i cant restore nothing.i try evrything,,,format sistem.,wipe dalvik ,cach but nothing.
Can you help me ,please???
Tnx
Click to expand...
Click to collapse
what recovery did you use in restoring omni rom?
warlycastro said:
what recovery did you use in restoring omni rom?
Click to expand...
Click to collapse
First i try to restore my older Ditto n3 rom ,bootloop(with philz),after that i flash twrp and try to restore Omni but again bootloop.
Tnx
Do you make a factory reset after restoring? Maybe it couse the Bootloops
dzontra11 said:
First i try to restore my older Ditto n3 rom ,bootloop(with philz),after that i flash twrp and try to restore Omni but again bootloop.
Tnx
Click to expand...
Click to collapse
2.6.3.1 TWRP? Sounds like bad flashing. Have tried "Enable md5 verification" in TWRP while restoring? Was it a complete backup from TWRP? Kernel? Modem? Boot? System?
I have not tried that but now i flash again philz via odin and try again but seems like Bootloop ,again,
Yes, complete backup from twrp and also complete backup from philz.
gencho81 said:
Do you make a factory reset after restoring? Maybe it couse the Bootloops
Click to expand...
Click to collapse
Nope.
dzontra11 said:
I have not tried that but now i flash again philz via odin and try again but seems like Bootloop ,again,
Yes, complete backup from twrp and also complete backup from philz.
Click to expand...
Click to collapse
Before you restore
Make sure to:
1. In Philz, Wipe Data / Factory Data Reset then Clean Install a new ROM
2. Wipe Data / Factory Data Reset then Wipe Data Factory Reset
3. Wipe Cache and Dalvik's Cache
4. Flash TWRP
5. Restore BACKUP from TWRP
Try it!
warlycastro said:
Before you restore
Make sure to:
1. In Philz, Wipe Data / Factory Data Reset then Clean Install a new ROM
2. Wipe Data / Factory Data Reset then Wipe Data Factory Reset
3. Wipe Cache and Dalvik's Cache
4. Flash TWRP
5. Restore BACKUP from TWRP
Try it!
Click to expand...
Click to collapse
I will try right now and report later..tnx in advance.
Failed.
Seems like i have a big problem here,,,,,any ideas??
how about flashing omni rom again? fresh flash.
warlycastro said:
how about flashing omni rom again? fresh flash.
Click to expand...
Click to collapse
Cant,i try but cant Twrp report an error e:bla,bla something...
deniz4700 said:
Cvm modun eski versiyonunda yedekleme sorunu olmuştu
GT-I9505 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
What?
Can i flash some prerooted stock rom now,via pc odin or something?
dzontra11 said:
Seems like i have a big problem here,,,,,any ideas??
Click to expand...
Click to collapse
Yes, you cant seem to write correct titles that are descriptive of topic.
Look,i need help here,so ,please if you can help to me it wiil be great.
I try again evrything i know but still stack on Samsung lognly hope is to flash some stock prerooted rom ,i think.
So ,anyone can recomended some stock rom for me?
Tnx
Anyone?
Sent from my Transformer TF101 using xda app-developers app
Title basically says it all.
I have been able to install TWRP on a S4 Mini. Do I need anything else to flash CM13?
riahc3 said:
Title basically says it all.
I have been able to install TWRP on a S4 Mini. Do I need anything else to flash CM13?
Click to expand...
Click to collapse
No, but most people would flash gapps 6 too, else you will miss a lot (must be done at the same time as the ROM the first time to set permissions)
IronRoo said:
No, but most people would flash gapps 6 too, else you will miss a lot (must be done at the same time as the ROM the first time to set permissions)
Click to expand...
Click to collapse
What I ment is before flashing it....Afterwards/during of couse Ill flash gapps
riahc3 said:
Title basically says it all.
I have been able to install TWRP on a S4 Mini. Do I need anything else to flash CM13?
Click to expand...
Click to collapse
Copy CM13 rom and gapp in your sd card.
Backup your old firmware through twrp.
Do a factory Reset from Wipe.
And install CM13 and gapp respectively.
And enjoy ^_^
syednawaz said:
Copy CM13 rom and gapp in your sd card.
Backup your old firmware through twrp.
Do a factory Reset from Wipe.
And install CM13 and gapp respectively.
And enjoy ^_^
Click to expand...
Click to collapse
checked every file hash matches, did exactly as written, done all of above and it doesn't work
TWRP went on in less than 10 second does that sound normal ? and how do you know if its actually on there?
Nope. Installation take atleast 2 or 3 minutes.
and if its installed properly you would have seen different rom from the stock.
Here is what i use for s4 mini(i9192). Also used it on i9190 model as well.
http://forum.xda-developers.com/galaxy-s4-mini/development/rom-aokp-rom-25-apr-2016-t3366314
and these steps mentioned in the website.
A. Initial install
1. Copy ROM and Gapps to your external SD Card or internal memory
2. Boot into recovery
3. Wipe
4. Install ROM and Gapps
5. Reboot
Its simple. Should have worked.
I hope you have installed your model rom.
A question the system format is required to install the rom ??
juanpabloml said:
A question the system format is required to install the rom ??
Click to expand...
Click to collapse
In TWRP Swipe for factory reset will do the job. you can also do dalvik /art cache in advance wipe. System or other wipe never did it for changing roms.
syednawaz said:
In TWRP Swipe for factory reset will do the job. you can also do dalvik /art cache in advance wipe. System or other wipe never did it for changing roms.
Click to expand...
Click to collapse
Ie that enough only to make WIPE FACTORY RESET AND WIPE DALVIK CACHE is not necessary to the FORMAT SYSTEM, DATA AND CACHE ??
sorry i do not understand.
to install a rom just do a factory reset. nothing else is necessary.
If you do not do factory reset, sometimes you will not be able to install a new version of rom(for example, from kitkat to lollipop).
if you do not do factory reset its called dirty flash.
for example
you are using custom rom cm13. and it has a new update released, you go in twrp recovery and install the updated rom without doing factory reset. this way you can keep all the application and data you have.
i hope i am making some sense. it is hard for me to explain.
well do some flashing and you will understand but always make a backup.