Related
Hey, everytime I am in a call, my ear taps the taskbar and it opens the notification window which covers my call screen. I have googled and searched this forum with no success.
Apart from TouchLockPro, was just curious as to if there is anything that addresses this issue?
Thanks in advance.
Do you have something (case?) blocking the proximity sensor? The screen should be turning off as soon as you put the phone to your ear.
Yes I do. I've just tested it out, that seems to be the problem. So is there any tweak to prevent this?
i know even with the screen turning off with the proxy censor i will find i am in the screen with the connections and battery info when i am done with a call... its kind of annoying and worrys me a bit i might accadently end the call when the screen is off.... also the flip over to make it a confrence phone is a 50/50 thing... this device is so glitchy
I randomly get this too, I think sometimes the sensor isn't used.. There are times I've noticed I can cover it up completely with my thumb and the screen doesn't go off, but other times it works just fine.
Ryryq said:
Yes I do. I've just tested it out, that seems to be the problem. So is there any tweak to prevent this?
Click to expand...
Click to collapse
Tweak...some testing to see where the sensor is (somewhere along the top near the HTC logo) and an X-acto knife to the case?
same thing happens to me, most of the time somehow I turn on airplane mode and the call disconnects.. sigh
TouchLockPro has a feature which turns the screen off using the G-sensor, but it's not just for calls, if you have it horizontal it'll be on, and if vertical it suspends/screen turns off; this would be good if it was just for calls, especially for those that use a case.
I'm just starting to use TouchLockPro (http://forum.xda-developers.com/showthread.php?t=444215) and I have most of the locking features turned off - I just hit the power button if I want to lock it.
It does keep the screen locked during a call so I no longer hit the buttons. Plus - when it unlocks I'm right back, exactly, where I left off.
There's lots of options to tweak, I think there's something for just about everyone.
I LOVE unlocking with the zoom bar - first time I've used that thing on my phone
~Eric
eknutson said:
I'm just starting to use TouchLockPro (http://forum.xda-developers.com/showthread.php?t=444215) and I have most of the locking features turned off - I just hit the power button if I want to lock it.
It does keep the screen locked during a call so I no longer hit the buttons. Plus - when it unlocks I'm right back, exactly, where I left off.
There's lots of options to tweak, I think there's something for just about everyone.
I LOVE unlocking with the zoom bar - first time I've used that thing on my phone
~Eric
Click to expand...
Click to collapse
Awesome. Mind sharing what settings you have enabled, please?
Sure
Light Sensor, Stylus Sensor, GSensor, Nav Sensor, :
Nothing checked (all disabled)
Keyboard:
Use Slider, Suspend On Slider In, Slider Out Disables LockMode and EnableInputAtSuspend are all checked, everything else is un-checked (HTC Lock API, Double TouchPanel Lock and KeepAliveAlways are un-checked.
BattClock:
just some preferences set for appearance
Telephone API:
Everything is checked (except light)
Software:
Nothing set up
Other Settings:
AutolockOnPowerOn and UnlockOnACPower are checked, everything else is un-checked (added vibrates Lock/Unlock once - I like the extra notification)
~Eric
thanks! works like a charm now, is there any way to lock it if it is idle for like 30 secs or something without havin to hit the power button
There's a number of ways to lock it using the various sensors - you can try one of those and see what fits your habits / style best. You can also click on the BattClock icon to get the menu - the lock icon is right there. That's 2 steps though...
~Eric
Since we need to have the screen turned on to keep wifi/gps etc. running, and there are a few apps that would ideally run in the background with the screen off; to save battery power (and burn in?) it would be nice to have the AMOLED screen display just a black image.
Is there any app out there that just displays a black screen and maybe ignores all but a specific input?
At the moment I just zoom into a black image in the browser, but I can't put the phone in my pocket like that.
(I tried searching for this, but it was beyond my google-fu.)
You dont have to keep the screen on to run either my gps is always on and it neva disconnects also ive spent many nights going to sleep leaving my wifi connected and its neva disconnected either
Yup. If you haven't set WiFi to switch off after 15mins, it should carry on running.
By doing what you proposed, you'll decrease battery life drastically as you'd effectively be disabling the chips sleep mode by keeping it running 100%. With that, only the screen switches off and everything else including Android keeps running. Any application holding a partial awake lock can achieve this.
Lock delay; an app to control the default screen-lock options allows this.
For instance, if you set the initial screen timeout to 2 minutes but standby/lock to 10 minutes in the settings, the screen will switch off after 2mins idling, but the rest of the phone will still be running incl. WiFi/GPS. You can enable a lock/pattern or no lock at all where you press any key including menu/trackpad and it'll come back on in the same place you left it, without any lock. If the phone idles for 10mins, it'll activate the screen lock and place the phone in the standard sleep mode. The max delay you can set the latter to is 24 hours.
I wouldn't advise avoiding the sleep mode unless required in specific circumstances. Battery loss will be drastic; I found out unintentionally when activating this option at the beginning.
-----------------------------------
- Sent via my HTC Desire -
Thanks th3, that should do what I want. I don't intend to leave it unattended, it's just for when don't need the screen on while an app is doing something.
Hi there, I love the LG G3, but its also annoying that the phone just lock itself right after the screen is off, unlike other device which often first lower the light, then dim the light and sleep/lock the device, allowing you to have some time touching the screen to keep it on. With G3, no matter which app you are in, or you are in the middle of the call, when it's darken the screen means the phone is lock and you have to turn on screen, enter lock code again...
Does anyone find it annoying too and know how to fix it? Thank you!
hnyuk49 said:
Hi there, I love the LG G3, but its also annoying that the phone just lock itself right after the screen is off, unlike other device which often first lower the light, then dim the light and sleep/lock the device, allowing you to have some time touching the screen to keep it on. With G3, no matter which app you are in, or you are in the middle of the call, when it's darken the screen means the phone is lock and you have to turn on screen, enter lock code again...
Does anyone find it annoying too and know how to fix it? Thank you!
Click to expand...
Click to collapse
Go to settings-lock screen-lock timer and set for 2 minutes or more. The default time is too short imo. I have mine set for 2 minutes.
Thanks but its not exactly what im looking for. I set for 30s time out and I think its enough for most of the time. On other phone, it allow you some dim time so that you can keep the screen on without having to unlock the device again but G3 just lock it, even in the middle of the call when the screen is off. Thats quite annoying.
hnyuk49 said:
Thanks but its not exactly what im looking for. I set for 30s time out and I think its enough for most of the time. On other phone, it allow you some dim time so that you can keep the screen on without having to unlock the device again but G3 just lock it, even in the middle of the call when the screen is off. Thats quite annoying.
Click to expand...
Click to collapse
Ok you want face detection. Go to settings-display-smart screen and check the box to enable. Screen will stay on when it detects your face.
face detection doesnt seem to work on LG phone as it does on Samsung. I find it useless feature. @@
Maybe it's just me, but I couldn't figure out how to set a screen timeout. I saw threads about screensaver, etc. but never came across a post about telling how to make the HU turn off the screen automatically and stay like that. There is a legend about Android being configurable, but this is killing it for me.
I know there is several ways to do it manually like long pressing the Mute(thx to Wolf Hamburg) or trying to locate the incredible small on screen button, which I find even more stupid and dangerous than texting in the car. But besides it's far from being comfotable, there are a few more issues which I should face when the screen is off. First it will turn back on seemingly random. It will turn back on if I change the volume, not like on my phone. To avoid this I tried to activate the speed dependent volume control, at most it could have been a workaround, but it was malfunctioning as well...(after 5 sec you switched off the screen it will set the safe volume, then turn back on the screen, if you retry it might work for some time after the second try).
What I'm looking for is a very basic functionality which works with every android phone I know: set a screen timeout (15-30 sec) and being able to change the volume without lighting up the display.
I would be really thankful for a solution!
p.s.: I already tried to switch off the stay always on in the debugger menu, without any effect :\
That bothers me too, specially screen coming back on volume change.
Hope someone develop a solution.
dejdo said:
Maybe it's just me, but I couldn't figure out how to set a screen timeout. I saw threads about screensaver, etc. but never came across a post about telling how to make the HU turn off the screen automatically and stay like that. There is a legend about Android being configurable, but this is killing it for me.
I know there is several ways to do it manually like long pressing the Mute(thx to Wolf Hamburg) or trying to locate the incredible small on screen button, which I find even more stupid and dangerous than texting in the car. But besides it's far from being comfotable, there are a few more issues which I should face when the screen is off. First it will turn back on seemingly random. It will turn back on if I change the volume, not like on my phone. To avoid this I tried to activate the speed dependent volume control, at most it could have been a workaround, but it was malfunctioning as well...(after 5 sec you switched off the screen it will set the safe volume, then turn back on the screen, if you retry it might work for some time after the second try).
What I'm looking for is a very basic functionality which works with every android phone I know: set a screen timeout (15-30 sec) and being able to change the volume without lighting up the display.
I would be really thankful for a solution!
p.s.: I already tried to switch off the stay always on in the debugger menu, without any effect :\
Click to expand...
Click to collapse
pczao said:
That bothers me too, specially screen coming back on volume change.
Hope someone develop a solution.
Click to expand...
Click to collapse
This isnt normal Android, its been modified to work with car head unit components in a car stereo and the Chinese devs have, annoyingly, done it so that ANY screen press, even volume changes, turns on the screen. Theoretically it shouldnt be too hard to change, just a case of searching for the code and of course there will also be some sort of interaction with the MCU. You could try looking in the build prop if your unit is rooted.
If you have a Klyde unit with hard buttons, holding down mute will turn the screen off, this may work on others too.
dejdo said:
Maybe it's just me, but I couldn't figure out how to set a screen timeout. I saw threads about screensaver, etc. but never came across a post about telling how to make the HU turn off the screen automatically and stay like that. There is a legend about Android being configurable, but this is killing it for me.
I know there is several ways to do it manually like long pressing the Mute(thx to Wolf Hamburg) or trying to locate the incredible small on screen button, which I find even more stupid and dangerous than texting in the car. But besides it's far from being comfotable, there are a few more issues which I should face when the screen is off. First it will turn back on seemingly random. It will turn back on if I change the volume, not like on my phone. To avoid this I tried to activate the speed dependent volume control, at most it could have been a workaround, but it was malfunctioning as well...(after 5 sec you switched off the screen it will set the safe volume, then turn back on the screen, if you retry it might work for some time after the second try).
What I'm looking for is a very basic functionality which works with every android phone I know: set a screen timeout (15-30 sec) and being able to change the volume without lighting up the display.
I would be really thankful for a solution!
p.s.: I already tried to switch off the stay always on in the debugger menu, without any effect :\
Click to expand...
Click to collapse
Today; Is there any solution for this to turn off the screen automatically? I'm looking at lots of posts without finding anything. I hope someone can help me. I have Android 6.0.1 Mashmallow.
I use this app, activated by my SWC. Only minor issue is that you have to tap screen to turn on. Screen stays off during volume changes.
https://play.google.com/store/apps/...toff&rdid=com.cygery.screenbacklightoff&pli=1
Hello guys,
i know there's a way to disable tilt to wake gestures from the watch settings, but is there a way to keep the watch on and also disable the "tilt to sleep" gesture ?
thanks
There is also a way to set screen always ON on watch setting
That's not the same thing. Always on screen is Active even if backlight is off. I want both active at same time ! If i tilt the Watch down, the backlight goes off and any sideloaded app open on Watch get closed.
what do you want ? screen ON with backlight ? without backlight ? active ? not active ?
if you add theater mode (double button click) screen keep ON and not active.
for always screen ON and backlight ON there are some app to keep backlight but battery last 5 hours....
dersie said:
what do you want ? screen ON with backlight ? without backlight ? active ? not active ?
if you add theater mode (double button click) screen keep ON and not active.
for always screen ON and backlight ON there are some app to keep backlight but battery last 5 hours....
Click to expand...
Click to collapse
Yep, i want screen on and backlight on as i am testing a sideloaded app, i dont care about battery.
Which app ? I don't want to root my Watch
Some app like :
https://play.google.com/store/apps/details?id=us.instext.lightr
https://play.google.com/store/apps/details?id=com.phonephreak.extendedlight
Did you ever find something to achieve this? It seems there needs to be a way to disable the action of tilting backwards/down from triggering ambient mode. That StayLit appears to only be for when the watch is still facing you. Ambient still gets triggered in alternate directions.
EDIT: I just realized "Infinity" in StayLit did what I needed. The + didn't work so I thought it wasn't working at all.