Develop Bugs

Ear touches the screen in a call

Hey, everytime I am in a call, my ear taps the taskbar and it opens the notification window which covers my call screen. I have googled and searched this forum with no success.
Apart from TouchLockPro, was just curious as to if there is anything that addresses this issue?
Thanks in advance.

Do you have something (case?) blocking the proximity sensor? The screen should be turning off as soon as you put the phone to your ear.

Yes I do. I've just tested it out, that seems to be the problem. So is there any tweak to prevent this?

i know even with the screen turning off with the proxy censor i will find i am in the screen with the connections and battery info when i am done with a call... its kind of annoying and worrys me a bit i might accadently end the call when the screen is off.... also the flip over to make it a confrence phone is a 50/50 thing... this device is so glitchy

I randomly get this too, I think sometimes the sensor isn't used.. There are times I've noticed I can cover it up completely with my thumb and the screen doesn't go off, but other times it works just fine.

Ryryq said:
Yes I do. I've just tested it out, that seems to be the problem. So is there any tweak to prevent this?
Click to expand...
Click to collapse
Tweak...some testing to see where the sensor is (somewhere along the top near the HTC logo) and an X-acto knife to the case?

same thing happens to me, most of the time somehow I turn on airplane mode and the call disconnects.. sigh

TouchLockPro has a feature which turns the screen off using the G-sensor, but it's not just for calls, if you have it horizontal it'll be on, and if vertical it suspends/screen turns off; this would be good if it was just for calls, especially for those that use a case.

I'm just starting to use TouchLockPro (http://forum.xda-developers.com/showthread.php?t=444215) and I have most of the locking features turned off - I just hit the power button if I want to lock it.
It does keep the screen locked during a call so I no longer hit the buttons. Plus - when it unlocks I'm right back, exactly, where I left off.
There's lots of options to tweak, I think there's something for just about everyone.
I LOVE unlocking with the zoom bar - first time I've used that thing on my phone
~Eric

eknutson said:
I'm just starting to use TouchLockPro (http://forum.xda-developers.com/showthread.php?t=444215) and I have most of the locking features turned off - I just hit the power button if I want to lock it.
It does keep the screen locked during a call so I no longer hit the buttons. Plus - when it unlocks I'm right back, exactly, where I left off.
There's lots of options to tweak, I think there's something for just about everyone.
I LOVE unlocking with the zoom bar - first time I've used that thing on my phone
~Eric
Click to expand...
Click to collapse
Awesome. Mind sharing what settings you have enabled, please?

Sure
Light Sensor, Stylus Sensor, GSensor, Nav Sensor, :
Nothing checked (all disabled)
Keyboard:
Use Slider, Suspend On Slider In, Slider Out Disables LockMode and EnableInputAtSuspend are all checked, everything else is un-checked (HTC Lock API, Double TouchPanel Lock and KeepAliveAlways are un-checked.
BattClock:
just some preferences set for appearance
Telephone API:
Everything is checked (except light)
Software:
Nothing set up
Other Settings:
AutolockOnPowerOn and UnlockOnACPower are checked, everything else is un-checked (added vibrates Lock/Unlock once - I like the extra notification)
~Eric

thanks! works like a charm now, is there any way to lock it if it is idle for like 30 secs or something without havin to hit the power button

There's a number of ways to lock it using the various sensors - you can try one of those and see what fits your habits / style best. You can also click on the BattClock icon to get the menu - the lock icon is right there. That's 2 steps though...
~Eric

[Q] How to Change Screen Timeout...

...while on the phone? The screen goes black in a matter of seconds and isn't affected by the general timeout setting. This can be a real PITA while navigating a VRU system.

Have you tried going into settings/display/screen timeout?

d12unk13astard said:
Have you tried going into settings/display/screen timeout?
Click to expand...
Click to collapse
That is the general timeout setting I was referring to, and it doesn't affect screen timeout while on the phone.

That's strange it shouldn't be timing out on you then. Maybe check the settings on the application your using and see if theres a reason it might be shutting off then.
i know when i had the mt4g and even my current G2x the display would turn off while talking on the phone then re-appear anytime i held it away from my head, probaly just the sensor.

Scaplet said:
...while on the phone? The screen goes black in a matter of seconds and isn't affected by the general timeout setting. This can be a real PITA while navigating a VRU system.
Click to expand...
Click to collapse
Mine does this too.. If I am on a call, the screen turns off rather quickly. I need to be able to toggle the mute during conference calls and it is a real PITA to have to hit the power button first every time.

CrozB said:
Mine does this too.. If I am on a call, the screen turns off rather quickly. I need to be able to toggle the mute during conference calls and it is a real PITA to have to hit the power button first every time.
Click to expand...
Click to collapse
Pain in Le Tush!

This sounds like a really stupid solution but I have experienced the same issue before hand. What I realized was in many cases when I was going to touch the screen my hand was getting close to the sensor on top that shuts off the screen while on a call. You know like when you put it next to your face to ensure that you aren't pushing buttons. Not sure if that is it, but just speaking from personal experience.

Mine does this sometimes , it just did it on this xda app and i know it wasent 30 seconds yet. also sometimes it doesnt lock just comes right back on after i hit the button
Sent from my GS2ET4g

Its just like my lock sceen time , if i go to lock sceen but press nothing it will go black in 5 seconds
Sent from my GS2ET4g

phatgenius said:
This sounds like a really stupid solution but I have experienced the same issue before hand. What I realized was in many cases when I was going to touch the screen my hand was getting close to the sensor on top that shuts off the screen while on a call. You know like when you put it next to your face to ensure that you aren't pushing buttons. Not sure if that is it, but just speaking from personal experience.
Click to expand...
Click to collapse
This is what I figured out after 20 or so times hitting the power button while on the phone.
The screen automatically comes back on in 1-2 seconds when you pull the phone away from your ear. Once I realized this, I stopped fouling it up by turning the screen off and on again with the power button. It would be nice if this delay could be adjusted, but it seems to work alright as is.

There is nothing wrong worth any of your phones as far as I know it's not adjustable yet.your phone does this while making a call to prevent your face from making a three way call or accidentally hanging up on whoever your talking to. Some one can correct me if I'm wrong but that's what I've heard and read several times and my samsung captivate did the same thing.
If you pull the phone away from your face so that the sensor can pick up the change in ambient light, or what ever it is that it does your screen should come back on shortly.to be honest
I kind of wish it would react faster, but it's still pretty good.
Sent from my SPH-D710 using XDA App

mine does this when not on a call , i think the sensor is only on while talking

[Q] Dimming Screen with Palm Not Working?

Anybody else having issues when placing your palm over the screen to dim it? It should turn the screen off and vibrate. I think I only saw that happen once, but I can't seem to get that to work.
Can somebody try it and tell me if it works for you all the time, some of the time, or rarely to never?
Thanks.

I got it working if I turn off the ambient screen setting on the device. You can also use the button too.

Ambient Screen Off
kpjimmy said:
I got it working if I turn off the ambient screen setting on the device. You can also use the button too.
Click to expand...
Click to collapse
Yup, I tried with both, ambient screen on and ambient screen off. No luck. Yeah, I guess I'll just have to use the button, seems faster anyway, or wait until it turns itself off. I guess I was just concerned my ambient light sensor might be defective, haven't had the chance to see if auto-brightness works correctly since it has been raining and cloudy outside and light indoors generally keeps it mid-brightness.

DaPhang said:
Yup, I tried with both, ambient screen on and ambient screen off. No luck. Yeah, I guess I'll just have to use the button, seems faster anyway, or wait until it turns itself off. I guess I was just concerned my ambient light sensor might be defective, haven't had the chance to see if auto-brightness works correctly since it has been raining and cloudy outside and light indoors generally keeps it mid-brightness.
Click to expand...
Click to collapse
Did you go to the android wear app and turn off ambient screen? I assume so. Mine turns "off" when I either "palm" it or push the button. I left the ambient screen sensor on and it still turned off for me.

Make sure your palm is touching the screen. If you're just cupping your hand over the screen, it won't work. It's not a "oh, it just turned dark" thing, but more of a "oh, my entire surface is being touched at once" thing.

Touch Screen Palm
jt3 said:
Make sure your palm is touching the screen. If you're just cupping your hand over the screen, it won't work. It's not a "oh, it just turned dark" thing, but more of a "oh, my entire surface is being touched at once" thing.
Click to expand...
Click to collapse
Thank you very much, that was it. It works now, operator error.

Stay on, screen!!

Maybe I'm just an idiot, but I can't for the life of my get my screen to not timeout after 15 seconds or so. I have the "Screen Timeout" setting set to 10 minutes and I turned Smart Stay off as I believe that was the culprit originally and it doesn't matter. If I don't touch the thing for a few, the screen turns off...and it DRIVES ME NUTS!! I HATE when the screen turns off when I don't tell it to. At least when Smart Stay was on it would stay on when I was looking at it. Now it doesn't matter. No touch, no on.
Am I missing something? There HAS to be a way to get the screen to stop timing out...

Do you a have the lock screen turned on? If so, check the timing on it.

Mad383Max said:
Do you a have the lock screen turned on? If so, check the timing on it.
Click to expand...
Click to collapse
That got it. Thank you. Strange they'd essentially over ride settings between menus. Oh well. Thanks again.

Ambient Mode/Always On Behavior?

Can anyone help confirm if they see this behavior with their watch? I have always-on screen set to ON in the Android Wear app. (Tilt to wake and gestures are both OFF.) I have noticed that even on the stock Moon Phase face, if I don't touch the face for a while, the watch goes to sleep. By that I mean, the face is completely black, as if I turned off the always-on screen option.
I haven't determined yet if it's always after a specific amount of time. Seems to be at least 30 min, maybe an hour.
Is this normal behavior? I was under the impression that always on means always on, And that time in dim mode would always show.

You are correct.
bailyc said:
Can anyone help confirm if they see this behavior with their watch? I have always-on screen set to ON in the Android Wear app. (Tilt to wake and gestures are both OFF.) I have noticed that even on the stock Moon Phase face, if I don't touch the face for a while, the watch goes to sleep. By that I mean, the face is completely black, as if I turned off the always-on screen option.
I haven't determined yet if it's always after a specific amount of time. Seems to be at least 30 min, maybe an hour.
Is this normal behavior? I was under the impression that always on means always on, And that time in dim mode would always show.
Click to expand...
Click to collapse
You are correct, always on means always on, the only time the watch should sleep, is when you have it on the charger. You may have a bad install or worst case scenario a bad watch.

vvveith said:
You are correct, always on means always on, the only time to watch should sleep, is when you have it on the charger. You may have a bad install or worst case scenario a bad watch.
Click to expand...
Click to collapse
Ok, thanks for confirming! I definitely have something wrong, then. I've factory reset several times and even taken off most apps, and it still happens. Looks like it might be the watch.

I have similar problem - always ON, gestures off, but after about 10 seconds it changes watchface to some dark/black one.

I believe the Always on Feature is not for having your watch face on all the time, but rather it dims your watch face but you still can tell the time with just the darker screen. It's not going to keep your watch face fully lit if that option is turned on.

Well, then I`m selling mine. Why would I want all them beautiful watchfaces if I can`t have them always on?! That`s just stupid.

rbs_uk said:
Well, then I`m selling mine. Why would I want all them beautiful watchfaces if I can`t have them always on?! That`s just stupid.
Click to expand...
Click to collapse
Most of the folks that make the WatchMaker faces either just dim the face, or they make a dimmed mode face that looks like it has phosphorous markings. I personally make custom dimmed modes. My favorite method is to make a blood red version of the face with just the essential features. The moon phase ones can look BAD ASS with the blood red moon phase on a pure black background. This is the only watch I have ever actually gotten comments on in public. When people see it they notice that it ain't no normal watch, and it ain't no Apple watch.

rbs_uk said:
Well, then I`m selling mine. Why would I want all them beautiful watchfaces if I can`t have them always on?! That`s just stupid.
Click to expand...
Click to collapse
I think the battery life would just be too short if you left the face on all the time, all the time meaning the watch never went into dim mode. Just run tilt on, and don't wear the watch to loose. Especially at night if the watch never dimmed that would get annoying as hell it's so bright.

'god guys, really????
rbs_uk said:
I have similar problem - always ON, gestures off, but after about 10 seconds it changes watchface to some dark/black one.
Click to expand...
Click to collapse
Come on guys you do understand ambient mode right? When the main screen of the watch face shuts down it goes into ambient mode, which is simply black and white. Just like any pure android device. (i.e. Nexus 6) If you do not understand of know of this behaviour please stop posting and do some research. 'The watch is acting as it is suppose to in Android Wear. Just like notifications on a Nexus device. Google is your friend.
So is YouTube and understanding the android system as of today. Come on, get a clue.

Yeah I think if it was on all the time you'd be lucky to get even a few hours of battery life out of it....

falcon26 said:
Yeah I think if it was on all the time you'd be lucky to get even a few hours of battery life out of it....
Click to expand...
Click to collapse
Well, I know what I personally thought was confusing is that "always on" isn't actually always on when charging. When on the charger, display turns off completely after a time. That's different behavior from what I'm used to based on the Moto X, which has AMOLED and still displayed ambient information on the screen when charging/docked. I find it a little odd that there is no built-in charging/docked display that uses the ambient (dimmed) display mode.
But to be sure, my watch definitely had something wrong with it. I just received a replacement unit yesterday, so I'll be testing it out today to see if it's able to stay dimmed as it should when off the charger.

Be attencion with "always on" mode, this is screen after four days (contrast on level 3).

I've had the "Ranger" watch face on with a full colour ambient mode and not experiencing any burn-in. Every minute it shifts the image somewhat in order to reduce any burn in effect. See https://play.google.com/store/apps/details?id=co.smartwatchface.watch.face.ranger.military .

Just to cease any confusion. Always On means the screen is always on. After a few seconds, the screen will dim and go into a black/white ambient mode to reserve power.
The OP says his screen is turning completely off. So it seems there is a problem there. Every Watch face has a different ambient mode. Perhaps the one you are using has a broken ambient mode and not displaying data.
I found the best way to make a watch face is to build one yourself. Purje Black is awesome for this (truely amazing app). I am not going to do a full review but the transition between full on and ambient mode is animated, looks fantastic, has lots of Hotspots to launch various apps like weather, Google Fit data, etc, and displays it in a awesome format.
But the best feature is that you can customize the ambient mode separately from the actual face. They also support community made themes, so just browse their Google Plus theme page, find one you like, customize it to how you want it and save it.
Just be careful with your AMOLED screen that you don't have any information that is static in ambient mode, like numbers, hour marks, etc. I prefer a Digital clock/Calendar date on my Amoled, but have a nice looking analog with various information on my full face.

The device going to sleep is normal. It will go from full on to ambient mode and from there if the watch isn't moved for 30 minutes it will shut the screen off. See below from Google.
"You can set the display to show the time or turn off completely when you're not using the watch. If set to turn off, the screen will turn on when you turn your wrist or touch the screen.*
Tip: Letting your screen turn off when you're not using the watch will help improve battery life. If the watch hasn't moved for 30 minutes, the screen will turn off even if you have it set to remain always on. To wake your watch, tilt it or press the power button."
Sent from my Nexus 6 using Tapatalk

Hi
I'm trying to find an App for my watch that will keep the Watchface in Ambient mode for as long as i like (more than 24Hrs) even when it's not on my hand (not being moved).
Any ideas would be appretiated.

ausi said:
Hi
I'm trying to find an App for my watch that will keep the Watchface in Ambient mode for as long as i like (more than 24Hrs) even when it's not on my hand (not being moved).
Any ideas would be appretiated.
Click to expand...
Click to collapse
First off between the battery hit and possible screen damage I wouldn't recommend that. But I haven't seen any faces or apps that would accomplish this. And since that feature is inherent to wear it would probably take root to accomplish it anyway.
Sent from my Nexus 6 using Tapatalk

crawrj said:
First off between the battery hit and possible screen damage I wouldn't recommend that. But I haven't seen any faces or apps that would accomplish this. And since that feature is inherent to wear it would probably take root to accomplish it anyway.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Thanks, i have root..........but still cannot find an App to do this, i still would like to try.

Ho about limiting brightness to lower level than level 1. While I,m not using watch, just before it goes to ambient, I can See brightness dimmed to lower than minimum and after, ambient turns on, whitch is brighter. What can i do to use lowest levels all the time?

Stay Lit Wear
In case you haven't found it yet, search Google Play for "Stay Lit Wear."