Hi dude
I update my note 4 sprint to last version (Q15) after that my quick charge dont work. When i put my phone to charge. It charges so slowly and in battry setting it show usb connect but i connect to charger but it didnt recognize and it recognize usb cable and because of that quick charge didnt work.
And when i connect my phone to computer and laptop didint connect and i couldnt use Odin because it didnt connect so how can i downgrade or fix this problem or can i install update from sd card?
Please help me
After update i understand my phone recognize charger as usb cabble and when i connect my phone to charger. Phone thinks that i connect phone to computer with usb cable and because of that charge so slowly and quick charge doesn't work.
Please help me
siamak136 said:
After update i understand my phone recognize charger as usb cabble and when i connect my phone to charger. Phone thinks that i connect phone to computer with usb cable and because of that charge so slowly and quick charge doesn't work.
Please help me
Click to expand...
Click to collapse
Dail ##3424# enter your MSL code if required, make sure the ''MTP" option is chosen.
Also try to do factory reset.
Sent from my SM-N910P using Tapatalk
Related
Everytime i connect my phone to my computer through a usb both third party and OEM usb cable the phone notification doesn't show anything or any indication that i can select to enter into storage mode.
any idea what might be wrong because i dont storage mode alot so i dont know if anything can be wrong with the usb port.
any help would be appreciated
thank you
Jimmy
jimprime said:
Everytime i connect my phone to my computer through a usb both third party and OEM usb cable the phone notification doesn't show anything or any indication that i can select to enter into storage mode.
any idea what might be wrong because i dont storage mode alot so i dont know if anything can be wrong with the usb port.
any help would be appreciated
thank you
Jimmy
Click to expand...
Click to collapse
What ROM you running, that might help ..... maybe turn off ADB , in settings, and check usb storage there ...
no ROM, everything is stock and debugging mode is unchecked as well
when i mannually try to use the USB mass storage from Setting>Wireless>USB utillties and click on Connect Storage to PC it gives me a window saying "ATTENTION: Usb is connected. Remove the cable" when i remove the cable then it tell me to Connect the USB cable
Same thing happens to me.
My solution is to plug my/your phone to the computer and open the notifications. Click/press on the usb is connected notification and you can enter storage mode directly without hassle.
Sent from my SGH-T989D using Tapatalk
jimprime said:
no ROM, everything is stock and debugging mode is unchecked as well
when i mannually try to use the USB mass storage from Setting>Wireless>USB utillties and click on Connect Storage to PC it gives me a window saying "ATTENTION: Usb is connected. Remove the cable" when i remove the cable then it tell me to Connect the USB cable
Click to expand...
Click to collapse
When I had this problem, I just needed to fix permissions in recovery. Is the phone rooted? Did you recently buy it new or used?
Solution is simple I suppose.
Disconnect the cable.
Go to settings from where USB connection can be enabled.
Click that option and it will ask you to connect the cable.
Only then connect it. That should be work.
Sent from my GT-I9100 using Tapatalk 2 Beta-5
jimprime said:
Everytime i connect my phone to my computer through a usb both third party and OEM usb cable the phone notification doesn't show anything or any indication that i can select to enter into storage mode.
any idea what might be wrong because i dont storage mode alot so i dont know if anything can be wrong with the usb port.
any help would be appreciated
thank you
Jimmy
Click to expand...
Click to collapse
does ur pc detect any device?
Well I tried all that,... But after around 15 reboots it suddenly started working so I wonder what happened there
Sent from my SGH-T989 using XDA
hey guys i have an problem when i put the usb to the phone it goes straight into download mode it doesnt even need to be connected to a computer or wall as soon it connects to the usb mini b port it goes into download mode help????/
makmoneynslp said:
hey guys i have an problem when i put the usb to the phone it goes straight into download mode it doesnt even need to be connected to a computer or wall as soon it connects to the usb mini b port it goes into download mode help????/
Click to expand...
Click to collapse
Have you tried removing the battery, leaving it out a few minutes? After about 5 minutes reinsert battery and reboot device then try plugging up to usb. Also might try a different USB cord/charger ... whatever you're using to plug into whatever you're plugging into.
ok i was going to transfer some files to my phone via usb cable and when i connect the usb cable to the phone the only thing that happens is that it displays slow charging logo. i checked and the phone is set to ask what to do when the cable is connected and tried another cable. im not on a custom rom and i tried to factory reset the phone but still wont work. any ideas ?
Hello,
I've got a SM-T813 and I ve got a problem with my usb port. I can neither connect to my PC or my usb-Rj45 since i installed TWRP and LineageOs.
I cannot select what to do when usb connection is detected.
I don't kown what's wrong. I changed the cable, re-install TWRP but i does not work.
Odin is not detected to.
Someone to help me please?
Thank you
ETNYBzh said:
Hello,
I've got a SM-T813 and I ve got a problem with my usb port. I can neither connect to my PC or my usb-Rj45 since i installed TWRP and LineageOs.
I cannot select what to do when usb connection is detected.
I don't kown what's wrong. I changed the cable, re-install TWRP but i does not work.
Odin is not detected to.
Someone to help me please?
Thank you
Click to expand...
Click to collapse
Your problem seems simular to what I had.
If you are sure the software settings are ok and that doesnt work, remove the backcover remove the battery connector, put it back again and see if that works. Does charging work?
HANSB57 said:
Your problem seems simular to what I had.
If you are sure the software settings are ok and that doesnt work, remove the backcover remove the battery connector, put it back again and see if that works. Does charging work?
Click to expand...
Click to collapse
Thats weird my s2 tablet has USb problems to. It stopped reading OTG usb connections and the PC. However it is always able to charge. I have noticed that when it does finally read on the PC it seems like the drives dont switch right and my battery wont charge. It got to the point I dont even try to plug it into a pc or USB otg just incase it quits charging I have SD card and twrp for installs so I use that instead. Most be a problem with the usb port and drivers.
Techguy777 said:
Thats weird my s2 tablet has USb problems to. It stopped reading OTG usb connections and the PC. However it is always able to charge. I have noticed that when it does finally read on the PC it seems like the drives dont switch right and my battery wont charge. It got to the point I dont even try to plug it into a pc or USB otg just incase it quits charging I have SD card and twrp for installs so I use that instead. Most be a problem with the usb port and drivers.
Click to expand...
Click to collapse
I dont know the answer nor the solution.
What I noticed however is that I used my tablet as an monitor for an USB web cam.
The problem (charging but not being able to connect to PC) started AFTER I removed the webcam.
The app I use (USB Camera Pro) has an option "remove camera safely"
If I use that option everything works fine but if I remove the cam cable without pressing this option I cant connect to my PC anymore and have to unplug the battery.
I am having a similar issue and would be grateful for help. My Tab T815 has a clean install of the latest Android 10 Rom and Pico Gapps via TWRP 3.4. All seem to be working great apart from the USB OTG. Specifically, I am trying to connect my DJI Mini drone controller and it's not registering it plugged in. I also have Android 10 on a galaxy S5 and have no issues at all when I connect the DJI controller to the phone. I have run a diagnostic app that says OTG is compatible with the T815 so am now at a loss on what to try next. Could this be an issue with the Rom?
Has anyone had issues to have the phone recognized on a PC?
Previously i had been able to connect it and to flash regular updates with odin and out of the blue
the phone will not show up at all on the pc, it just charges and if i plug it turned off a warning sign shows on the usb connector.
Any ideas?
Thanks in advance.
sr.bond said:
Has anyone had issues to have the phone recognized on a PC?
Previously i had been able to connect it and to flash regular updates with odin and out of the blue
the phone will not show up at all on the pc, it just charges and if i plug it turned off a warning sign shows on the usb connector.
Any ideas?
Thanks in advance.
Click to expand...
Click to collapse
Same here!