I am stucking at bootloop while flashing RR 6.0 with kernel 2.zip(provided in thread ).my steps
Wipe cache delvik cache system data
After that flashed kernel and then ROM and gapps(I tried without gapps too). Then delvik cache and my phone did not boot for almost 15-20 minutes. I tried 3 times but I am still stucking at boot. After flashing also tried factory data reset but no success. Please help me
Did you format user data? ( not wipe)
Yes tried with format and wipe too
Did you flash firmware?
No. I flashed kernel 2. Zip which was recommended in the thread of mix 2
Vkboy said:
No. I flashed kernel 2. Zip which was recommended in the thread of mix 2
Click to expand...
Click to collapse
It's Mi6 forums.
Ohhhh I see
Vkboy said:
No. I flashed kernel 2. Zip which was recommended in the thread of mix 2
Click to expand...
Click to collapse
Mate you have to flash firmware with the rom.
Related
i have a unlocked & rooted galaxy nexus....i flash the rom open kang build 22 & flash the gapps 4.0.4 after i rebooted. i stocked in bootanimation & hang up & appear the google logo, always like that...cannot start.....HELP please....
Wipe and reflash the ROM then Gapps, then boot.
Did you do a full wipe. Wipe factory/data, cache partition and in the advanced menu wipe dalvik cache. Then flash rom and gapps
After you flash the rom, wipe data,cache,dalvik and flash gapps. You cant just flash rom than the 4.0.4 gapps you will get the bootloop.
i already do full wipe & still the same problem?
1. Wipe data
2. Wipe cache
3. Wipe dalvik cache
4. Flash ROM
5. Flash Gapps
6. Reboot
krisjuls said:
i already do full wipe & still the same problem?
Click to expand...
Click to collapse
In addition to doing what Eddy says, re-download the rom and Gapps.
Thanks for reply but still the same problem
charlieb620 said:
After you flash the rom, wipe data,cache,dalvik and flash gapps. You cant just flash rom than the 4.0.4 gapps you will get the bootloop.
Click to expand...
Click to collapse
I always flash like that never have a problem. Never reflash after flash. Try to flash another ROM OP to see if it was the ROM or not.
Sent from my Galaxy Nexus using Tapatalk
i install other rom foxhound ang still the same problem
i choose the show log it says rm: can't remove '/data/dalvik-cache':no such file or directory....rm:can't remove '/cache/dalvik-cache:no such file or directory.....rm: can't remove '/sd-ext/dalvik-cache': no such file or deirectory
Thanks guys for all ur reply & time.......i already done all...its ok now, i use the wugfresh to flash stock & unroot and unlock & unroot again.Again Many Thanks
Hey,I just flashed twrp's last recovery and now i want to flash a 4.2.1 rom,what should I wipe? Cuz i never used twrp before and I don't wanna dk smth wrong :-/ should I wipe everything except Internal/external memory?
calinoii said:
Hey,I just flashed twrp's last recovery and now i want to flash a 4.2.1 rom,what should I wipe? Cuz i never used twrp before and I don't wanna dk smth wrong :-/ should I wipe everything except Internal/external memory?
Click to expand...
Click to collapse
Factory reset, format /system
Flash rom
Edit: this is how I flash roms and I NEVER had an extra issue by doing so.
Sent from my i9250
calinoii said:
Hey,I just flashed twrp's last recovery and now i want to flash a 4.2.1 rom,what should I wipe? Cuz i never used twrp before and I don't wanna dk smth wrong :-/ should I wipe everything except Internal/external memory?
Click to expand...
Click to collapse
this how i flash ANY rom and have never had issues..
1. factory reset
2. wipe system
3. wipe cache
4. wipe dalvik
5. flash rom
6. flash gapps
7. reboot
k786 said:
this how i flash ANY rom and have never had issues..
1. factory reset
2. wipe system
3. wipe cache
4. wipe dalvik
5. flash rom
6. flash gapps
7. reboot
Click to expand...
Click to collapse
+1 :good:
Note to OP: Don't flash Gapps if it is included already in the ROM you installed.
after flash i wipe the cache/dalvik. I think it is the option after you flash in twrp.
Thanks for your answers
I'm using TeamCanjica CyanogenMod 10.2. Each time I've installed a new ROM on any device I've always gone for the full wipe and flash (Data/cache/davlik) but I am wondering if I am simply updating an existing version do I need to wipe data/factory reset?
This is the procedure I'd have thought would work:
Download latest zip (Only ROM? I already have the latest GAPPS)
boot into recovery
wipe cache + davlik
flash zip
wipe cache + davlik
reboot
Would this update work and keep all my data/settings etc or would this likely cause problems with the build? If it wouldn't work is there a way to update without losing everything?
Cheers
oliverf said:
I'm using TeamCanjica CyanogenMod 10.2. Each time I've installed a new ROM on any device I've always gone for the full wipe and flash (Data/cache/davlik) but I am wondering if I am simply updating an existing version do I need to wipe data/factory reset?
This is the procedure I'd have thought would work:
Download latest zip (Only ROM? I already have the latest GAPPS)
boot into recovery
wipe cache + davlik
flash zip
wipe cache + davlik
reboot
Would this update work and keep all my data/settings etc or would this likely cause problems with the build? If it wouldn't work is there a way to update without losing everything?
Cheers
Click to expand...
Click to collapse
your procedure works
teddytsen said:
your procedure works
Click to expand...
Click to collapse
short and to the point, I like it and we'll do the latest upgrade today thanks.
do you know if I get my 10 posts does the annoying captcha goes away?
oliverf said:
short and to the point, I like it and we'll do the latest upgrade today thanks.
do you know if I get my 10 posts does the annoying captcha goes away?
Click to expand...
Click to collapse
Yes
Sent from my GT-I8160 using Xparent Skyblue Tapatalk 2
Hello, since i want to get miui on my huawei ascend p6, i have tryed to flash 4 diffrent roms, but they all get stuck on "huawei ascend" logo, and pretty much keep staying there. Im running omni kitkat, with tmrp recovery. And i have no clue what to do.
kamphoz said:
Hello, since i want to get miui on my huawei ascend p6, i have tryed to flash 4 diffrent roms, but they all get stuck on "huawei ascend" logo, and pretty much keep staying there. Im running omni kitkat, with tmrp recovery. And i have no clue what to do.
Click to expand...
Click to collapse
I was having problems flashing MIUI due to inconsistent "how to flash" here on the forum.
Then I followed this and it never fails
Boot into TWRP
1. Wipe data
2. Wipe cache
3. Wipe dalvik
4. Wipe system
5. Wipe custom
Flash MIUI
This seems to work every time for me.
iwtfmcl said:
I was having problems flashing MIUI due to inconsistent "how to flash" here on the forum.
Then I followed this and it never fails
Boot into TWRP
1. Wipe data
2. Wipe cache
3. Wipe dalvik
4. Wipe system
5. Wipe custom
Flash MIUI
This seems to work every time for me.
Click to expand...
Click to collapse
What MIUI should i flash? is there a speciel one?
iwtfmcl said:
I was having problems flashing MIUI due to inconsistent "how to flash" here on the forum.
Then I followed this and it never fails
Boot into TWRP
1. Wipe data
2. Wipe cache
3. Wipe dalvik
4. Wipe system
5. Wipe custom
Flash MIUI
This seems to work every time for me.
Click to expand...
Click to collapse
Can't get it to work.
Hi,
When i tried flashing a custom rom and a custom kernel it just gives me black screen after starting up again maybe you guys have got the same problem before and what did you do to solve this issue? I tried these custom rom/custom kernel combinations :
FreedomOS-op3-nevax-1.7-CE-signed / blu_spark_r114-OOS-6.0.1 thulium
FreedomOS-op3-nevax-1.7-CE-signed / ElementalX-OP3-0.23
ResurrectionRemix-M-v5.7.2-20160804-oneplus3 / blu_spark_r114-OOS-6.0.1_thulium_e476ded
ResurrectionRemix-M-v5.7.2-20160804-oneplus3 / ElementalX-OP3-0.23
My TWRP version is 3.2.1 official
These are one of the many methods i tried:
Method 1
1. Wipe Cache, Data, Internal storage, Dalvik/art cache and system.
2. Flash Custom Rom.
3. Wipe cache, Dalvik/art cache.
4. Flash Custom Kernel.
5. Reboot.
Method 2
1. Wipe Cache, Data, Internal storage, Dalvik/art cache and system.
2. Flash Custom Rom.
3. Flash Custom Kernel.
4. Wipe cache, Dalvik/art cache.
Method 3
1. Wipe Cache, Data, Internal storage, Dalvik/art cache and system.
2. Flash Custom Rom.
3. Flash Custom Kernel.
These are some of the combinations i tried and even some of the methods i tried are nonsens but i am just trying to get it to work. If you need any more information just tell me . Help is very much appreciated .
3.5.2 base dont work with custom kernel yet. The twrp Version is a non known at my End. I think you better read this forum. From A to Z. Since all your awnsers can be found easy.
Saqrez said:
Hi,
When i tried flashing a custom rom and a custom kernel it just gives me black screen after starting up again maybe you guys have got the same problem before and what did you do to solve this issue? I tried these custom rom/custom kernel combinations :
FreedomOS-op3-nevax-1.7-CE-signed / blu_spark_r114-OOS-6.0.1 thulium
FreedomOS-op3-nevax-1.7-CE-signed / ElementalX-OP3-0.23
ResurrectionRemix-M-v5.7.2-20160804-oneplus3 / blu_spark_r114-OOS-6.0.1_thulium_e476ded
ResurrectionRemix-M-v5.7.2-20160804-oneplus3 / ElementalX-OP3-0.23
My TWRP version is 3.2.1 official
These are one of the many methods i tried:
Method 1
1. Wipe Cache, Data, Internal storage, Dalvik/art cache and system.
2. Flash Custom Rom.
3. Wipe cache, Dalvik/art cache.
4. Flash Custom Kernel.
5. Reboot.
Method 2
1. Wipe Cache, Data, Internal storage, Dalvik/art cache and system.
2. Flash Custom Rom.
3. Flash Custom Kernel.
4. Wipe cache, Dalvik/art cache.
Method 3
1. Wipe Cache, Data, Internal storage, Dalvik/art cache and system.
2. Flash Custom Rom.
3. Flash Custom Kernel.
These are some of the combinations i tried and even some of the methods i tried are nonsens but i am just trying to get it to work. If you need any more information just tell me . Help is very much appreciated .
Click to expand...
Click to collapse
try to flash supersu after the rom, reboot to system. Reboot back to recovery and flash kernel
otonieru said:
try to flash supersu after the rom, reboot to system. Reboot back to recovery and flash kernel
Click to expand...
Click to collapse
I didn't flash SuperSU as it is pre installed..
Darkje said:
3.5.2 base dont work with custom kernel yet. The twrp Version is a non known at my End. I think you better read this forum. From A to Z. Since all your awnsers can be found easy.
Click to expand...
Click to collapse
3.5.2 base? Can you please explain it a little bit more detailed thank you and i already read alot and can't find it thats why i made a thread.
Please read the freedom os topic. It address well why you cannot Flash a custom kernel. It is simply that kernel sources for Version 1.7 (aka 3.5.2 base) are not releases.
Darkje said:
Please read the freedom os topic. It address well why you cannot Flash a custom kernel. It is simply that kernel sources for Version 1.7 (aka 3.5.2 base) are not releases.
Click to expand...
Click to collapse
Oh i see any other idea for doing this with a different freedom os or something
Saqrez said:
Oh i see any other idea for doing this with a different freedom os or something
Click to expand...
Click to collapse
As suggested earlier try reading some ROM threads, going around flashing ROMs and kernels with no purpose is going to get you a soft brick very quickly.
My suggestion decide what you need out of a ROM, that is missing from stock, read a few rom threads to identify one that fills your needs. Then when you've got a ROM in mind go back and read the thread THOROUGHLY before flashing, had you done this with FreedomOS you wouldn't be here now.