Hi,
When i tried flashing a custom rom and a custom kernel it just gives me black screen after starting up again maybe you guys have got the same problem before and what did you do to solve this issue? I tried these custom rom/custom kernel combinations :
FreedomOS-op3-nevax-1.7-CE-signed / blu_spark_r114-OOS-6.0.1 thulium
FreedomOS-op3-nevax-1.7-CE-signed / ElementalX-OP3-0.23
ResurrectionRemix-M-v5.7.2-20160804-oneplus3 / blu_spark_r114-OOS-6.0.1_thulium_e476ded
ResurrectionRemix-M-v5.7.2-20160804-oneplus3 / ElementalX-OP3-0.23
My TWRP version is 3.2.1 official
These are one of the many methods i tried:
Method 1
1. Wipe Cache, Data, Internal storage, Dalvik/art cache and system.
2. Flash Custom Rom.
3. Wipe cache, Dalvik/art cache.
4. Flash Custom Kernel.
5. Reboot.
Method 2
1. Wipe Cache, Data, Internal storage, Dalvik/art cache and system.
2. Flash Custom Rom.
3. Flash Custom Kernel.
4. Wipe cache, Dalvik/art cache.
Method 3
1. Wipe Cache, Data, Internal storage, Dalvik/art cache and system.
2. Flash Custom Rom.
3. Flash Custom Kernel.
These are some of the combinations i tried and even some of the methods i tried are nonsens but i am just trying to get it to work. If you need any more information just tell me . Help is very much appreciated .
3.5.2 base dont work with custom kernel yet. The twrp Version is a non known at my End. I think you better read this forum. From A to Z. Since all your awnsers can be found easy.
Saqrez said:
Hi,
When i tried flashing a custom rom and a custom kernel it just gives me black screen after starting up again maybe you guys have got the same problem before and what did you do to solve this issue? I tried these custom rom/custom kernel combinations :
FreedomOS-op3-nevax-1.7-CE-signed / blu_spark_r114-OOS-6.0.1 thulium
FreedomOS-op3-nevax-1.7-CE-signed / ElementalX-OP3-0.23
ResurrectionRemix-M-v5.7.2-20160804-oneplus3 / blu_spark_r114-OOS-6.0.1_thulium_e476ded
ResurrectionRemix-M-v5.7.2-20160804-oneplus3 / ElementalX-OP3-0.23
My TWRP version is 3.2.1 official
These are one of the many methods i tried:
Method 1
1. Wipe Cache, Data, Internal storage, Dalvik/art cache and system.
2. Flash Custom Rom.
3. Wipe cache, Dalvik/art cache.
4. Flash Custom Kernel.
5. Reboot.
Method 2
1. Wipe Cache, Data, Internal storage, Dalvik/art cache and system.
2. Flash Custom Rom.
3. Flash Custom Kernel.
4. Wipe cache, Dalvik/art cache.
Method 3
1. Wipe Cache, Data, Internal storage, Dalvik/art cache and system.
2. Flash Custom Rom.
3. Flash Custom Kernel.
These are some of the combinations i tried and even some of the methods i tried are nonsens but i am just trying to get it to work. If you need any more information just tell me . Help is very much appreciated .
Click to expand...
Click to collapse
try to flash supersu after the rom, reboot to system. Reboot back to recovery and flash kernel
otonieru said:
try to flash supersu after the rom, reboot to system. Reboot back to recovery and flash kernel
Click to expand...
Click to collapse
I didn't flash SuperSU as it is pre installed..
Darkje said:
3.5.2 base dont work with custom kernel yet. The twrp Version is a non known at my End. I think you better read this forum. From A to Z. Since all your awnsers can be found easy.
Click to expand...
Click to collapse
3.5.2 base? Can you please explain it a little bit more detailed thank you and i already read alot and can't find it thats why i made a thread.
Please read the freedom os topic. It address well why you cannot Flash a custom kernel. It is simply that kernel sources for Version 1.7 (aka 3.5.2 base) are not releases.
Darkje said:
Please read the freedom os topic. It address well why you cannot Flash a custom kernel. It is simply that kernel sources for Version 1.7 (aka 3.5.2 base) are not releases.
Click to expand...
Click to collapse
Oh i see any other idea for doing this with a different freedom os or something
Saqrez said:
Oh i see any other idea for doing this with a different freedom os or something
Click to expand...
Click to collapse
As suggested earlier try reading some ROM threads, going around flashing ROMs and kernels with no purpose is going to get you a soft brick very quickly.
My suggestion decide what you need out of a ROM, that is missing from stock, read a few rom threads to identify one that fills your needs. Then when you've got a ROM in mind go back and read the thread THOROUGHLY before flashing, had you done this with FreedomOS you wouldn't be here now.
Related
Total newb question but on the CM10 thread they say:
Instructions:
First time flashing CyanogenMod 10 your device, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Click to expand...
Click to collapse
.... they don't say how to flash if you are upgrading.
Some in the thread say that they just "dirty flash" it.
What exactly is a "dirty flash"?
oshax said:
Total newb question but on the CM10 thread they say:
Instructions:
First time flashing CyanogenMod 10 your device, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
.... they don't say how to flash if you are upgrading.
Some in the thread say that they just "dirty flash" it.
What exactly is a "dirty flash"?
Click to expand...
Click to collapse
dirty flash means you didnt wipe data/cache.
most of the time, you can dirty flash newer versions of the same rom over the older version of the rom you have.
HOWEVER, if you have problems, you need to wipe data/cache and reflash the rom completely
Zepius said:
dirty flash means you didnt wipe data/cache.
most of the time, you can dirty flash newer versions of the same rom over the older version of the rom you have.
HOWEVER, if you have problems, you need to wipe data/cache and reflash the rom completely
Click to expand...
Click to collapse
Guess I might as well wipe the cache and dalvik even on a dirty flash?
Thanks
I upgraded from CM10 M1 to M2 with only a wipe of Dalvik cache. Works fine.
I finished installing M2 after wiping both the cache and dalvik cache (figured I would do the cache just in case).
Worked great!
Thanks all
oshax said:
Total newb question but on the CM10 thread they say:
Instructions:
.... they don't say how to flash if you are upgrading.
Some in the thread say that they just "dirty flash" it.
What exactly is a "dirty flash"?
Click to expand...
Click to collapse
***what Nexus version do you have?*** i've used the below instructions with GSM GNex***
If you're coming from an AOSP CM9 rom, Do the following :
Download Maguro (or your models ROM+Gappsl).
- boot into recovery.
- Preform NANDroid Backup.
- Wipe Dalvik cache.
- Wipe Factory reset.
- Wipe Cache.
- install zip from SDcard>choose zip from SDcard>ROM.zip (your ROM)
- Flash Gapps.zip
- Flash kernel.zip (if you have one)
- go to Advanced> Fix Permissions
- Reboot system now !
- Enjoy.
***I've used this method for a trillion flashes !***
No need to wipe anything when updating nightlies. Like it was said before, wipe data and reflash when you face problems.
Sent from my i9250
bk201doesntexist said:
No need to wipe anything when updating nightlies. Like it was said before, wipe data and reflash when you face problems.
Sent from my i9250
Click to expand...
Click to collapse
+1
I have a AT&T Samsung Galaxy S3 (SGH-1747) that is running stock with root.
I have rooted my phone using the samsung toolkit located here: http://forum.xda-developers.com/showthread.php?t=1746665
Since that toolkit flashed a CWM Based recovery I have installed ROM Manager and flashed CWM Recovery version 6.0.1.2
My questions are..
- with my current setup.. am I technically running the "Stock" samsung kernel?
- why would you want to flash a different kernel to your phone?
- and is it necessary to flash a different kernel in order to use certain custom roms?
- At first I was leaning towards flashing CM10 nightly but the more I look at it.. I want to flash PARANOIDANDROID 2.22 http://forum.xda-developers.com/showthread.php?t=1818199
Is this rom fully compatible with my AT&T phone? and since i'm running stock with root, do I need to do anything special before flashing this rom? Factory reset? Wipe Data? I've already made a full nandroid backup.
Thank you!
- with my current setup.. am I technically running the "Stock" samsung kernel? I believe so
- why would you want to flash a different kernel to your phone? Different kernels do different things.. some have better batter life.. some let you OC and UC..
- and is it necessary to flash a different kernel in order to use certain custom roms?Well sometimes.. Well technically.. most kernels will work with most of the ROMS out there.. as long as you stay withing your phones threads.. But some ROMs have a kernal with them.. and some ROMS you need to flash your own kernel..
Diamond22 said:
- with my current setup.. am I technically running the "Stock" samsung kernel? I believe so
- why would you want to flash a different kernel to your phone? Different kernels do different things.. some have better batter life.. some let you OC and UC..
- and is it necessary to flash a different kernel in order to use certain custom roms?Well sometimes.. Well technically.. most kernels will work with most of the ROMS out there.. as long as you stay withing your phones threads.. But some ROMs have a kernal with them.. and some ROMS you need to flash your own kernel..
Click to expand...
Click to collapse
Thank you for the reply.
On the rom i'm wanting to flash for my SGH-i747 http://forum.xda-developers.com/showthread.php?t=1818199
The steps for flashing are as follows:
CWM: Install Zip: Rom: Download Here Make sure the file you download is PA-2.22-d2att.zip
CWM: Install Zip: Gapps: Download (These are the new ones)
CWM: Wipe Data/Factory Reset
CWM: Advanced/Wipe Dalvik Cache
Reboot and edit your Apps Dpi & Layout under Settings/Paranoid Settings - DO NOT RESTORE YOUR OLD PROPERTIES FOR NOW
Would i need to wipe data, factory reset, then also wipe dalvik cache BEFORE I install the rom and gapps since i'm running stock with root?
Thank you
i'm also reading that for paranoidandroid you must first flash CM10 then flash paranoid.. is this accurate?
umm.. not sure where you saw that you need to flash a CM rom before flashing the paranoid ROM..
I believe the Paranoid rom is based off CM
The instruction on the link you have, in my opinion, is wrong..
The way that i flash my roms is...
Wipe data/factory reset..
Wipe Cache
Wipe Dalvik
Format/Data
Fomat/System ( i think deletes backups) only do in emergency.aka optional step
Flash ROM
Flash Gapps.
THATS IT
Some people will wipe cache afer flashing a rom..
But if you wipe data/factory reset i believe deletes the ROM...
Diamond22 said:
umm.. not sure where you saw that you need to flash a CM rom before flashing the paranoid ROM..
I believe the Paranoid rom is based off CM
The instruction on the link you have, in my opinion, is wrong..
The way that i flash my roms is...
Wipe data/factory reset..
Wipe Cache
Wipe Dalvik
Format/Data
Fomat/System ( i think deletes backups) only do in emergency.aka optional step
Flash ROM
Flash Gapps.
THATS IT
Some people will wipe cache afer flashing a rom..
But if you wipe data/factory reset i believe deletes the ROM...
Click to expand...
Click to collapse
If you are already running CM10 then you don't need to wipe Cache. Just dalvik and data. Im pretty sure thats what was confusing, since this is based off of CM10.
DarthDerron said:
If you are already running CM10 then you don't need to wipe Cache. Just dalvik and data. Im pretty sure thats what was confusing, since this is based off of CM10.
Click to expand...
Click to collapse
yeah, I just keep reading and reading.. probably making this out to be more difficult than it really is just don't want to end up with a brick or anything.
I'm already on stock + root + latest CWM so I just need to put the files on my phone and flash but I believe these are the steps i need to take:
1- Download ROM and Gapps to internal sd card
2- Boot phone into recovery
3- WIPE Cache/Delvik/Data factory reset> Mounts and Storage- format system
4- Flash ROM and Gapps
since im new to xda i can not post on the main thread http://forum.xda-developers.com/showthread.php?t=2442977&page=12
so i had to create this one as a question, cause i have a problem installing this rom, i downloaded both the kernel and the rom from the main thread, i first flashed to stock rom with odin, then i followed every step to install the kernel and after the rom, but im stuck in boot loop and im kinda angry cause it seems like im the only one with that problem.
i tried to install the rom using white's 1.33 kernel instead of percy's kernel ( the one provided in the main thread) and then flashing the rom, and it kinda worked, because i didnt go in to boot loop, but neither wifi or bluetooth werent working.
pls help me!!! i really want to try this rom!
1.first flash stock ddlk2
2.download the rom and flash it after :
(i) formatting system,data and cache
(ii) mounting all partitions
When done flashing,wipe data and reboot
davithdeathrider said:
since im new to xda i can not post on the main thread http://forum.xda-developers.com/showthread.php?t=2442977&page=12
so i had to create this one as a question, cause i have a problem installing this rom, i downloaded both the kernel and the rom from the main thread, i first flashed to stock rom with odin, then i followed every step to install the kernel and after the rom, but im stuck in boot loop and im kinda angry cause it seems like im the only one with that problem.
i tried to install the rom using white's 1.33 kernel instead of percy's kernel ( the one provided in the main thread) and then flashing the rom, and it kinda worked, because i didnt go in to boot loop, but neither wifi or bluetooth werent working.
pls help me!!! i really want to try this rom!
Click to expand...
Click to collapse
Try this method
#1-Flash stock rom using odin
#2-Go to cwm
#3-Mount all partitions
#4-Install CyanogenMod#2 kernel
#5-Back and go to Advance then REBOOT RECOVERY
#6-You are on cwm now and the fonts are small
#7-Go to mounts and Format system,data,cache
#8-Dont press back -Mount all partitions
#9-Install zip from sd card-choose zip then choose The Rom
#10-When it is done flashing -Wipe Data - tHEN REBOOT
Do this.
1. Go to cwm recovery
2. Clear data and wipe cache
3. Go to advance :- wipe dalvik cache and battery states.
4. Go to mount & storage :- format system, data & cache.. dont format sd.
5. Then mount everything expect sd-ext.
6. Flash kernel.
7. Go to advance reboot recovery.
8. Again wipe data & cache.
9. go to advance and again wipe dalvik cache & battery states.
10. Mount everything expect sd-ext
This time you dont need to format system, data, or cache in mount.
11. Finally flash rom and reboot.
Hope it work.
Using optimus nexus me v5 on galaxy y
Hello
I am using Revenge OS as of now and I would like to change to Havoc OS. Do I need to first flash MIUI and then Havoc OS or can I directly flash Havoc OS?
Also, in general, everytime I flash a new ROM do I need to clear system, data, vendor, cache, dalvik/ART cache? Please help me, I am new to these things.
A proper guidance might lead me not to damage my phone.
Thanks in advance.
Boot into TRWP
1. Download the ROM and GApps and save it to SD-Card
2. Wipe System, Data, Dalvik, Cache.
3. Flash the ROM and GApps.
4. Reboot and Enjoy.
cojo11 said:
Boot into TRWP
1. Download the ROM and GApps and save it to SD-Card
2. Wipe System, Data, Dalvik, Cache.
3. Flash the ROM and GApps.
4. Reboot and Enjoy.
Click to expand...
Click to collapse
while flashing MIUI, will following the same procedure work?
idkmaybe21? said:
while flashing MIUI, will following the same procedure work?
Click to expand...
Click to collapse
It wouldn't. And you also have to be careful about ARB.
How do i install xiaomi.eu when coming from an AOSP custom rom?
I was using Paranoid Android Quartz 4 (AOSP) for a good while now but it i want to go to xiaomi.eu because of the better battery management and other features.
I wanna know what's the right procedure to flash the rom. I am going to include the rom and custom kernel plus magisk on top.
Im confused as to which to wipe and/or format. Like which to do first and such before flashing the rom, kernel and magisk.
I'm using OrangeFox recovery because TWRP doesnt work on mine. Phone is ginkgo.
Thanks for the response
Wipe dalvik, cache, system, vendor, data. Flash rom, magisk. Reboot. If you face bootloop (most probably) then format data partition. You'll be okay.
Pavello said:
Wipe dalvik, cache, system, vendor, data. Flash rom, magisk. Reboot. If you face bootloop (most probably) then format data partition. You'll be okay.
Click to expand...
Click to collapse
Should i format data partition before flashing rom or should i do it after i face bootloop?
Thanks for replying
Format after flashing ROM. Formatting before flashing will wipe out internal storage.