Bluetooth default volume - Nexus 7 (2013) Q&A

Hey community,
I had nexus 7 wifi model with 6.0.1 MOB30X timurs kernel v4. I insalled it on my car and have bluetooth receiver connected to amplifier, so the main problem is that everytime i turn on keys in my car it turns on and connects, but everytime it connects, volume are going down to maybe 25 percent and i always have to volume it up. Because this is 6.0.1 i cant turn on "disable absolute volume" in dev settings. Is there any method to change that default volume or disable absolute volume?
And one more question, how to add more steps in bluetooth controled volume? Because i tried almost everything and the steps wont get lower, always changing 6-7%? It would be perfect 2-3%.
Please help

Related

Control bluetooth headset volume? Sony HBH-IS800

I just paired a Sony bluetooth headset (HBH-IS800) with my Tilt 2 and the volume is quite loud when listening to music. I put media player sound volume down to 5%, apparently the lowest, and it's still very loud. The only other option at that point is going down to 0%, obviously too quiet :-|
Also, the main system volume slider on the side - no effect on the headset whatsoever. Whether it's maxed out or silent - the bluetooth headset is still too loud.
Does anyone have any recommendations on:
1) How to go between <5% and >0% volume on media player?
2) How to get the main volume control to affect the bluetooth headset volume?
3) Any other ideas on lowering the music volume overall? Maybe another (better?) music player could work? Maybe a reg setting I can modify?
Any advice is appreciated - the headset is so cool - I'd love to make it usable!!! - TIA!
-Fnortner
P.S. - I called Sony - their answer: "We don't support the headset unless it's paired with a Sony phone". Boo Sony!
I have the same problem with this headset.
I had it running on the Touch HD with volume control from the device works perfectly.
Is there any solution yet?
same volume control issue with BT8040
With both Media Player or PocketTunes, I am not able to alter the volume on the BT8040, either from the Tilt2, or the earpiece itself.
Never had this problem with the same earpiece and my original Tilt.
Same problem here
I have the same problem. I have a bluetooth set which I connect to FM transmiter. The problem is: Volume is all the way up so the music is horrible, it gets distorted. I'd like to know how to manage the bluetooth volume in the system settings, is there a way? Pushing the left buttons (system volume) wont affect bluetooth volume, neither any other volume control within the settings. Any help appreciated.
I have found a solution that works for me. I use Nitrogen Player and you can just turn the equalizer on and change the preamp level to close to the bottom. Works a treat for me.
Code:
Options -> Settings -> Equalizer.
http://code.google.com/p/microfi-nitrogen/
I have a bluetooth stereo headset and when I pair it it tells me that I can not control the volume from the phone.. any way to fix??
dahauss said:
I have a bluetooth stereo headset and when I pair it it tells me that I can not control the volume from the phone.. any way to fix??
Click to expand...
Click to collapse
Same problem to me... I listen often to internet radio, but now it's too loud :-(
Same Problem here...
If anyone came up with a solution for this that works native to the ROM (vs just adjusting the eq) post it here, and I'll do the same.
jon5kr said:
If anyone came up with a solution for this that works native to the ROM (vs just adjusting the eq) post it here, and I'll do the same.
Click to expand...
Click to collapse
I have a stereo BT headset, and whenever I pair it with my (tmo US) TP2, the phone throws up a standard "you have to adjust the volume from the headset, can't do it from the handset" warning...and when I do use the volume controls on the headset, the volume does adjust accordingly, but without any feedback from the phone (no volume slider or other indication), so the adjustment is obviously happening in the headset's circuitry, and the audio coming from the phone is at a static, un-adjustable level.
From the research I've done, the culprit is the sub-par Widcomm bluetooth stack in the phone, and I haven't yet found anyone who has engineered a replacement stack. I know the possibility exists (I upgraded the bluetooth stack on my Wizard a couple of years ago to get one that had the A2DP profile), but I just don't think anybody has made a replacement for this model yet
sirphunkee said:
I have a stereo BT headset, and whenever I pair it with my (tmo US) TP2, the phone throws up a standard "you have to adjust the volume from the headset, can't do it from the handset" warning...and when I do use the volume controls on the headset, the volume does adjust accordingly, but without any feedback from the phone (no volume slider or other indication), so the adjustment is obviously happening in the headset's circuitry, and the audio coming from the phone is at a static, un-adjustable level.
Click to expand...
Click to collapse
Thanks for the reply! My situation is backwards in the sense that the headset doesn't have volume controls - and what I seem to be finding is that there doesn't seem to be an immediate fix for controlling a headset from the phone. I did use a tool called "Advanced Config" to find a default music volume that I can change, so I lowered that from 100 to 50 and now the volume is at least comfortable. However I have no control over it yet....
Could these issues be due to USB 2.0 versus USB 2.1 ?
I got a Motorola H17 (USB 2.1) and everything works perfect. Have volumn control from phone and headset and all audio sources work fine.
Oooops. Meant Bluetooth 2.0 vs Bluetooth 2.1.
jon5kr said:
Thanks for the reply! My situation is backwards in the sense that the headset doesn't have volume controls - and what I seem to be finding is that there doesn't seem to be an immediate fix for controlling a headset from the phone. I did use a tool called "Advanced Config" to find a default music volume that I can change, so I lowered that from 100 to 50 and now the volume is at least comfortable. However I have no control over it yet....
Click to expand...
Click to collapse
Yes, for some reason, the BT stack in this phone seems to assume that all BT stereo headsets also have built-in controls on them and won't allow them to adjust system volume. I think we're probably stuck with that fact until somebody finds a BT stack to replace the TP2's native one.
The best workaround for now may be just to find and use a headset that does have volume controls. I'll be posting a review soon of the ones I have now, the Plantronics/Altec Lansing Backbeat 903's
jonto said:
Could these issues be due to USB 2.0 versus USB 2.1 ?
I got a Motorola H17 (USB 2.1) and everything works perfect. Have volumn control from phone and headset and all audio sources work fine.
Click to expand...
Click to collapse
So when you play music through it, you can control the volume on the handset itself, and with controls on the headset? If so, I'm guessing it's because that's a monaural (not stereo) headset, so it may not be the same volume. My headset has BT 2.1 on it, and while I can control the playback etc on the phone, the volume controls only adjust the headset volume, not the volume on the phone.
sirphunkee said:
So when you play music through it, you can control the volume on the handset itself, and with controls on the headset? If so, I'm guessing it's because that's a monaural (not stereo) headset, so it may not be the same volume. My headset has BT 2.1 on it, and while I can control the playback etc on the phone, the volume controls only adjust the headset volume, not the volume on the phone.
Click to expand...
Click to collapse
This may be true since it is only monaural. The volume control (on the phone) still controls the phone (thus the headset) while the BT control only controls the BT headset.
jonto said:
This may be true since it is only monaural. The volume control (on the phone) still controls the phone (thus the headset) while the BT control only controls the BT headset.
Click to expand...
Click to collapse
Good evening,
If it can help you with tcpmp-0. 72RC1 - GF5500Edition - Alpha4. 1 can adjust the volume of this famous helmet HBH-IS800 and it is easier than with nitrogene.
Good evening
Ichtus
if its is supported by only sony phones(BB storm too) then can we get the profile from a xperia and install it on another device
I have seen multiple people state they can adjust the volume both on their headset and on the handset asystem volume. I thought perhaps it was the BT stack EXCEPT I was able to do this as well before I did a hard reset now I cannot adjust the 2 volume controls independently. The handset volume is static. Will someone that can adjust the system volume with a headset compare settings/egistry entries with me?
Is there a way we can adjust the volume of the line out from the bluetooth connection, anyone, lately ive have noticed that most devices are doing this, dont want to revert to a old stack but there has to be a way to combine the headset volume with the bluetooth volume

Bluetooth (volume) issues with 6.0.1 update

Has anyone else had volume weirdness with the update?
In my car specifically I have seen where the volume almost kind of resets to maximum when you reconnect to the bluetooth audio and when you go to adjust it the volume slider skips around and the volume adjustment is more extreme than the slider indicates (like one hash of movement is almost minimum volume to maximum volume) and the audio sounds all blown out.
So far its not doing it with my jambox and it didnt do this ever with the car (BMW) prior to 6.0.1.
Just upgraded to 6.0.1 yesterday, and now I am having this very same "loudness" problem with my Braven 570 speaker at work. Until this is fixed, I will not be able to use it to have some soft background music at work.
Apparently this is a known issue with 6.0.1
https://www.reddit.com/r/Nexus6P/comments/3w9vr8/android_601_bluetooth_headset_too_loud_after/
http://www.androidpolice.com/2015/1...ut-it-breaks-volume-control-on-many-headsets/
Yeah
Apparently it looks like a known issue. Volumes also apparently work fine with some devices, Not my JBL speakers. There is no followed, set standard for Bluetooth volumes. I just went back to 6.0.0., hope they fix it with next patch, or one of you fine gentlemen can give us some directions to manually fix it in root without braking something.
Nexus 5
So i installed 7.0 and i got the options to disable absolute volume but it wont stay checked. Every time i back out its unchecked.
Where is this option? I cannot find it and my phone is resetting bluetooth volume to 50% every time I connect it to my car or headphones after the nougat update. I like to use the cars volume and it is very counter productive to adjust the volume on the phone every time.

Car bluetooth volume

Anyway to increase the car Bluetooth volume? Pixel XL is way too soft compare with all my previous phone. Thanks.
angka8 said:
Anyway to increase the car Bluetooth volume? Pixel XL is way too soft compare with all my previous phone. Thanks.
Click to expand...
Click to collapse
This may be a dumb question, but did you try turning up the volume on the phone? I know my phone likes to reset the volume to really low when my car connects sometimes. After I turn the volume back up on the phone it's plenty loud in my car stereo.
Failing that, there's a "Disable absolute Volume" option for Bluetooth audio in developer options you could try.
This happens to me when I have connected to my bluetooth headphones and turned the volume down. When I connect again in the car the volume stays at what the headphones were at and I have to turn the volume up on the phone. After that it sticks until I use my headphones again.
csick said:
This may be a dumb question, but did you try turning up the volume on the phone? I know my phone likes to reset the volume to really low when my car connects sometimes. After I turn the volume back up on the phone it's plenty loud in my car stereo.
Failing that, there's a "Disable absolute Volume" option for Bluetooth audio in developer options you could try.
Click to expand...
Click to collapse
Ok let me try option. Thanks.
Headsets tend to control the bt volume on the phone. Cars often have their own volume and don't send volume commands to the phone.
angka8 said:
Anyway to increase the car Bluetooth volume? Pixel XL is way too soft compare with all my previous phone. Thanks.
Click to expand...
Click to collapse
I agree, I've found myself turning the car volume up 3-4 more turns than I used to. Not a huge deal, but definitely noticeable.
I've noticed the same thing on my Pixel XL while on bluetooth in my car but I'm also using the new Android Auto app as well.
Yesterday i noticed that while driving home from work i had low volume on my music (Car radio & phone were max volume) but while using Google Play music it went to a commercial (Don't pay for it) and started went very loud. After the commercial was over it went back to low volume?
Does this remind anyone of the TV commercial having loud volume issue to get your attention?
Can anyone confirm my suspicion?
Bluetooth gain/volume has always been an issue for me.
I make a lot of DIY portable bluetooth speakers as a hobby and BT input volume is a huge issue compared vs. analog input.
I finally found a Chinese BT amplifer manufacturer who was willing to mod their amp's BT input with higher gain. This helped considerably.
My old JVC car stereo was awful. I was always having to boost the BT output gain.
My 2015 Kia Optima's Infinity stereo doesn't have the same issue. BT volume is fine.
If you are willing to root and try a mod on your phone, the Viper4Android mod lets you raise Bluetooth gain:
http://forum.xda-developers.com/pixel-xl/themes/mod-weta-audio-t3491179
Hope this helps.
csick said:
This may be a dumb question, but did you try turning up the volume on the phone? I know my phone likes to reset the volume to really low when my car connects sometimes. After I turn the volume back up on the phone it's plenty loud in my car stereo.
Failing that, there's a "Disable absolute Volume" option for Bluetooth audio in developer options you could try.
Click to expand...
Click to collapse
This is not working. Hopefully the update will resolve this.

Car bluetooth volume always defaults to ~70% instead of max volume

Hey guys,
I like connecting my phone to my car's bluetooth. I have found a way to remove the "high volume" warning message so that the media volume output from my phone can be at maximum volume. However, every time my phone connects to my car's bluetooth, the volume defaults to being around 70% and not being at the max level. I would like to find a way to have bluetooth media output volume always be maxed out. Is there some way to do it maybe through adb or something like that?
Thank you

Volume goes down after tuning on phone

Hi everyone,
My problem is that after turning on my Nokia 5.1 Plus the volume goes down on my earphones (plugged). I mean, if I start listening music right after turning on the music volume is ok, and after few seconds it goes down without any notice and if I try to turn it up it's at it maximum, but if I restart the phone and turn it up right after it's a few points below the maximum. And the loop continues this way.
I've switched dev options of audio limitations regarding bluetooth, because I didn't find any for plugged earphones. I think this started happening after upgrading to Android 10, but I'm not sure.
Is there any solution? Is this a bug or a limitation done by android on purpose and has to be disabled via rooting?
Thank you all in advance!

Categories

Resources