Can anyone help me to guide how do I flash twrp on honor 8 pro asop treble already installed but adb reboot loader not working can anyone help me
gmfrvr said:
Can anyone help me to guide how do I flash twrp on honor 8 pro asop treble already installed but adb reboot loader not working can anyone help me
Click to expand...
Click to collapse
Have you enabled usb debugging?
try "adb devices". if it says "unauthorized" and you are don't to get a confirmation request on the phone then use the hardware button combination.
hold vol up + vol down + power, release the power key after the screen lights up but keep holding the two volume keys until the fastboot screen shows.
devilrulz4ever said:
Have you enabled usb debugging?
try "adb devices". if it says "unauthorized" and you are don't to get a confirmation request on the phone then use the hardware button combination.
hold vol up + vol down + power, release the power key after the screen lights up but keep holding the two volume keys until the fastboot screen shows.
Click to expand...
Click to collapse
I tried this method for flash twrp but it did not recognise my phone I was given command fastboot devices
gmfrvr said:
I tried this method for flash twrp but it did not recognise my phone I was given command fastboot devices
Click to expand...
Click to collapse
Were you able to boot in fastboot?
Do you have the proper drivers installed?
Related
My power button died, and I'm trying to deal with it, found my way here about rooting the phone. It seems like all the instructions require the power button to select a mode or something. Is there a way to root the phone without the power button so I can use sweep to wake?
nexus_newb said:
My power button died, and I'm trying to deal with it, found my way here about rooting the phone. It seems like all the instructions require the power button to select a mode or something. Is there a way to root the phone without the power button so I can use sweep to wake?
Click to expand...
Click to collapse
activate adb debugging mode , then go to command prompt and type either "adb reboot bootloader " or "adb reboot recovery" to enter either mode without power button .
-Jesco- said:
activate adb debugging mode , then go to command prompt and type either "adb reboot bootloader " or "adb reboot recovery" to enter either mode without power button .
Click to expand...
Click to collapse
Thanks! I tried, but in order to unlock the bootloader, I have to press the power button to continue?
nexus_newb said:
Thanks! I tried, but in order to unlock the bootloader, I have to press the power button to continue?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1894717
i think that can help .
You could possibly do this.
thanks, I have a mac so I couldn't do the latter, and the former I have a newer version. fml
you can always flash back to a older firmware using toolkits
Sent from my Galaxy Nexus using Tapatalk 4 Beta
DELETE THIS THREAD PLEASE, PROB is SOLVED
I tried to install lineage os via twrp and i think my tablet its now hardbricked....It go on a blackscreen after the google startup logo and i can'T access bootloader even if it's unlocked, the menu of recovery, bootloader etc don'T pop up when i try button power and vol down....Is there any way to fix that?
myusernameisalreadytaken said:
I tried to install lineage os via twrp and i think my tablet its now hardbricked....It go on a blackscreen after the google startup logo and i can'T access bootloader even if it's unlocked, the menu of recovery, bootloader etc don'T pop up when i try button power and vol down....Is there any way to fix that?
Click to expand...
Click to collapse
Are you sure that in any statup mode you only see the Google logo and then the unit turns off?
Do the following test:
- charge your N7'13 for several hours
- connect it to a PC, and while still connected...
- boot in fastboot mode, "With the device powered off, hold Volume Down + Power until the bootloader appears, then release the buttons."
- observe your PC for new USB device indication (in Device Manager)
What's the new device ID number (if any)?
e.g.
USB\VID_18D1&PID_4EE0
USB\VID_05C6&PID_9008
LOS 15.1 (flex11 build) doesnt have a bootanimaltion. So after rebooting to system You should see a Google logo, then a black screen until setup wizard shows up
Sent from my whyred using XDA Labs
k23m said:
Are you sure that in any statup mode you only see the Google logo and then the unit turns off?
Do the following test:
- charge your N7'13 for several hours
- connect it to a PC, and while still connected...
- boot in fastboot mode, "With the device powered off, hold Volume Down + Power until the bootloader appears, then release the buttons."
- observe your PC for new USB device indication (in Device Manager)
What's the new device ID number (if any)?
e.g.
USB\VID_18D1&PID_4EE0
USB\VID_05C6&PID_9008
Click to expand...
Click to collapse
When i plug it i see LeMobile Android device android composite ADB Interface and when i click on it i see the device id
USB\VID_18D1&PID_4EE7
I can't boot in fastboot mode the screen come black with a backlight after the google logo and nothing happen...
When i flashed the rom i've see the android app update and nothing after
myusernameisalreadytaken said:
When i plug it i see LeMobile Android device android composite ADB Interface and when i click on it i see the device id
USB\VID_18D1&PID_4EE7
I can't boot in fastboot mode the screen come black with a backlight after the google logo and nothing happen...
When i flashed the rom i've see the android app update and nothing after
Click to expand...
Click to collapse
USB\VID_18D1&PID_4EE7 - wow I haven't seen this one before.
Please clarify and/or confirm:
- is it actually Nexus 7 2013 2nd gen?
- what exactly lineage os version/link did you flash?
- "With the device powered off, hold Volume Down + Power until the bootloader appears..." you get blank screen with backlight and USB\VID_18D1&PID_4EE7 on your PC
- "With the device powered off, hold Volume Down + Power..." does it respond OK to "fastboot devices" command on your PC?
NOTE - "With the device powered off, hold Volume Up + Power" gets you into recovery with ADB ID similar to USB\VID_18D1&PID_4EE7 - Have you mixed up " Volume Up" and " Volume Down"?
This case is perplexing and that's why I'm repeating and confirming everything. If it is indeed N7'13 AND there is no hardware issue AND you can't get into fastboot, then proceed to the unbricking guide - https://forum.xda-developers.com/showpost.php?p=75360854&postcount=199
To enter 9008 mode...
- turn it off and disconnect USB
- press both vol buttons and...
- plug in to a PC
k23m said:
USB\VID_18D1&PID_4EE7 - wow I haven't seen this one before.
Please clarify and/or confirm:
- is it actually Nexus 7 2013 2nd gen?
- what exactly lineage os version/link did you flash?
- "With the device powered off, hold Volume Down + Power until the bootloader appears..." you get blank screen with backlight and USB\VID_18D1&PID_4EE7 on your PC
- "With the device powered off, hold Volume Down + Power..." does it respond OK to "fastboot devices" command on your PC?
NOTE - "With the device powered off, hold Volume Up + Power" gets you into recovery with ADB ID similar to USB\VID_18D1&PID_4EE7 - Have you mixed up " Volume Up" and " Volume Down"?
This case is perplexing and that's why I'm repeating and confirming everything. If it is indeed N7'13 AND there is no hardware issue AND you can't get into fastboot, then proceed to the unbricking guide - https://forum.xda-developers.com/showpost.php?p=75360854&postcount=199
To enter 9008 mode...
- turn it off and disconnect USB
- press both vol buttons and...
- plug in to a PC
Click to expand...
Click to collapse
I dindt know for power+vol up.....with that i've fixed my problem! i'Ve reinstalled lineage 14.1 and it work.... The only issus it's i dind't see the normal fastboot or bootlarder menu with vol down...
My ADB is On in settings and I can use ADB normal. But when my Phone is off I can't turn it on anymore the only way would be with ADB command: ADB reboot devices!
Power button + Volume UP/DOWN isn't working anymore...
The thing is, when connecting my Phone to my PC after it gets off it will show the charging animation. And when my phone reached 100% it stays in the animation and doesn't boot up. ADB isnt working in that state.
How can I boot my phone?? Pls I hope someone can help me PLS PLS
You must try conclude pins on motherboard for button volume up when you connecting USB cable, after that fastboot was started and you can type fastboot reboot command on pc.
my volume up button broken and i need that to flash stock rom again as phone in bootloop and cant access recovery,phone boots and shows logo for 1 sec and reboots again any ideas plz i flashed the oneos rom
ireaper4592 said:
my volume up button broken and i need that to flash stock rom again as phone in bootloop and cant access recovery,phone boots and shows logo for 1 sec and reboots again any ideas plz i flashed the oneos rom
Click to expand...
Click to collapse
If you have power and volume-down buttons functioning, boot the phone with the power button and when the bootloader unlocked warning comes up, press the volume-down button and you will get the options for restart, fastboot, recovery etc. Simply choose what you want with the volume-down button and confirm with the power button.
tnsmani said:
If you have power and volume-down buttons functioning, boot the phone with the power button and when the bootloader unlocked warning comes up, press the volume-down button and you will get the options for restart, fastboot, recovery etc. Simply choose what you want with the volume-down button and confirm with the power button.
Click to expand...
Click to collapse
yes got that problem is i need volume up button to work so i can put in adb mode so i can flash stock rom,i decrypted my devices then installed the oneos rom and thats when i lost access to recovery and goot into bootloop?
I brick my phone and it bootloops... So i can't enter into the firmware...
I can't enter into any recovery so I can't sideload...
My only way is using EDL.. but I'm unable to enter... I completely turn it off, pressed both vol buttons and plug the cable
If I keep the buttons, it enters always en fastboot mode; if I not hold the buttons it tries to load the normal firmware and bootloads
How can I enter? Why I am unable to sideload?
Please help
Astur_Torque said:
I brick my phone and it bootloops... So i can't enter into the firmware...
I can't enter into any recovery so I can't sideload...
My only way is using EDL.. but I'm unable to enter... I completely turn it off, pressed both vol buttons and plug the cable
If I keep the buttons, it enters always en fastboot mode; if I not hold the buttons it tries to load the normal firmware and bootloads
How can I enter? Why I am unable to sideload?
Please help
Click to expand...
Click to collapse
Hold both volume buttons and power bottom to enter fastboot mode, in fast boot mode type fastboot boot twrp.img or what ever the twrp image name is and in twrp boot to EDL. Make sure MSM Download Tool to is up and running and you clicked the start button first. It will flash the firmware to the phone....
TheGhost1951 said:
Hold both volume buttons and power bottom to enter fastboot mode, in fast boot mode type fastboot boot twrp.img or what ever the twrp image name is and in twrp boot to EDL. Make sure MSM Download Tool to is up and running and you clicked the start button first. It will flash the firmware to the phone....
Click to expand...
Click to collapse
thanks, but I was completely unable to enter into twrp... when I put fastboot boot twrp.img or similar filename It always restarts and bootloops
Any idea what twrp version works?
Astur_Torque said:
thanks, but I was completely unable to enter into twrp... when I put fastboot boot twrp.img or similar filename It always restarts and bootloops
Any idea what twrp version works?
Click to expand...
Click to collapse
OnePlus 9 pro
Download twrp-3.7.0_11-0-lemonadep.img
Download page for twrp-3.7.0_11-0-lemonadep.img
dl.twrp.me
TheGhost1951 said:
OnePlus 9 pro
Download twrp-3.7.0_11-0-lemonadep.img
Download page for twrp-3.7.0_11-0-lemonadep.img
dl.twrp.me
Click to expand...
Click to collapse
With that it restarts but not load TWRP
I've been through some woes this week with MSM Tool and my advice for anyone that gets to that point this week when trying to get to Android 13 with root:
If you open MSM Tool and you don't see any ports or devices listed (ever), then you have a driver problem. If you get the Sahara error you have the wrong MSM Tool or more-likely, you didn't play Simon Says correctly with your buttons.
If you get the sahara error or you cannot ever get your phone into EDL mode, then do the following:
Take a deep breath
Unplug your phone
Grab your phone like a crab claw and mash both volume buttons and the power button so you can easily hold all 3 at the same time
Hold all 3 down for 30 seconds then let go
Wait a few seconds
Hold ONLY the volume buttons down for a few seconds
Did the phone turn on? If not then sweet the phone is off off
Now hold both volume buttons down for 10 seconds and then plug in your usb cable with MSM Tool already open
You should now be in EDL mode and if not you're bad at Simon Says so try again
If your screen is black and you get nothing back from MSM Tool then it's your drivers.
I focused so so much on changing PCs and cables and MSM Tools and fastboot commands when in reality drivers were my issue from the beginning and MSM Tool and EDL mode are both flakey. The above steps worked for me 100% of the time. You just have to actually wait a long time between your steps.
Astur_Torque said:
With that it restarts but not load TWRP
Click to expand...
Click to collapse
Time to MSM, there has to be a way to EDL!
Hi,
My Oneplus 11 phone that I had converted from Colors OX to Oxygen OS following a restart only reboots on 1+, sometimes it goes to the recovery menu, the use of the power and volume keys to return to fasboot mode no longer have any effect... it hasn't even been recognized by a pc... Except the usb to charge seems to be working. What can I do in the face of so much mishap because I can't find a solution?
Thanks
Same situation here. I've tried everything for a month. No luck. Only thing you can do is send it back to Oppo or Oneplus
msm tools is the only thing can save it but require official authorization to log in. So don't bother trying anymore.
kikoleboss said:
Hi,
My Oneplus 11 phone that I had converted from Colors OX to Oxygen OS following a restart only reboots on 1+, sometimes it goes to the recovery menu, the use of the power and volume keys to return to fasboot mode no longer have any effect... it hasn't even been recognized by a pc... Except the usb to charge seems to be working. What can I do in the face of so much mishap because I can't find a solution?
Thanks
Click to expand...
Click to collapse
Does the phone boot into recovery by itself when you turn it on? or do you boot it into recovery yourself?
ChrisFeiveel84 said:
Does the phone boot into recovery by itself when you turn it on? or do you boot it into recovery yourself?
Click to expand...
Click to collapse
I would rather say by itself with several restarts alone on the 1+ screen, it arrives on the recovery screen alone and I choose english power off, I press again and it's the same cycle, I can choose reboot device it doesn't change nothing
kikoleboss said:
I would rather say by itself with several restarts alone on the 1+ screen, it arrives on the recovery screen alone and I choose english power off, I press again and it's the same cycle, I can choose reboot device it doesn't change nothing
Click to expand...
Click to collapse
already made a factory reset in the recovery and tried to boot ?
ChrisFeiveel84 said:
already made a factory reset in the recovery and tried to boot ?
Click to expand...
Click to collapse
Doesn't work I do but nothing ... Thank you for your help and no usb recognize only reboot reboot reboot and Recovery/language
If you have any idea or soft to do something ?
because only reboot reboot reboot
kikoleboss said:
Doesn't work I do but nothing ... Thank you for your help and no usb recognize only reboot reboot reboot and Recovery/language
Click to expand...
Click to collapse
Try holding volume up + volume down during boot, it should go into bootloader mode (start holding them before you power on the device by pressing the power button and continue holding them during boot). If it doesn't go into bootloader mode it's very weird because recovery is loaded after the bootloader.
TheNewHEROBRINE said:
Try holding volume up + volume down during boot, it should go into bootloader mode (start holding them before you power on the device by pressing the power button and continue holding them during boot). If it doesn't go into bootloader mode it's very weird because recovery is loaded after the bootloader.
Click to expand...
Click to collapse
Thanks but no change only reboot more speed
if i press the three buttons when booting in fact it turns on and off faster then i stop the three buttons, it stays on the 1+ screen for a long time fixed then arrives at the language screen
chines english
I corrected but I think it's because I press the volume and power button that it launches in fastbootd but no more bootloader and no ubs recognition
Any idea please ? no chance for me
kikoleboss said:
Thanks but no change only reboot more speed
if i press the three buttons when booting in fact it turns on and off faster then i stop the three buttons, it stays on the 1+ screen for a long time fixed then arrives at the language screen
chines english
I corrected but I think it's because I press the volume and power button that it launches in fastbootd but no more bootloader and no ubs recognition
Any idea please ? no chance for me
Click to expand...
Click to collapse
Very strange, fastbootd is inside the recovery and could be unbootable but normal bootloader mode should work nonetheless. Try having the phone connected to PC why attempting the button combination, maybe they added this security measure.
This device is hard bricked. I faced the same issue. Any key combinations won't take you to fastboot to fix. I gave it to service centre to fix.
TheNewHEROBRINE said:
Very strange, fastbootd is inside the recovery and could be unbootable but normal bootloader mode should work nonetheless. Try having the phone connected to PC why attempting the button combination, maybe they added this security measure.
Click to expand...
Click to collapse
When he can boot to fastbootd he can fix the phone
My phone is not bricked and i can with key Combo not boot to fastboot .
Power off
And press power, voll down and voll up boot to edl.
Power off
Voll down and Power boot to recovery
Power off
Voll up and power normal boot to system
When you can boot to fastbootd you can flash the full firmware over fastbootd
With fbe (Same firmware what you have used on your phone )
A hard brick is when you phone goes only in edl
kikoleboss said:
Thanks but no change only reboot more speed
if i press the three buttons when booting in fact it turns on and off faster then i stop the three buttons, it stays on the 1+ screen for a long time fixed then arrives at the language screen
chines english
I corrected but I think it's because I press the volume and power button that it launches in fastbootd but no more bootloader and no ubs recognition
Any idea please ? no chance for me
Click to expand...
Click to collapse
ChrisFeiveel84 said:
When you can boot to fastbootd you can flash the full firmware over fastbootd
With fbe (Same firmware what you have used on your phone )
A hard brick is when you phone goes only in edl
Click to expand...
Click to collapse
He has got a very strange brick, he can boot to recovery but not to bootloader, so it's not an hard brick like when you can only go into EDL mode. Did seriously OnePlus remove the possibility to enter bootloader mode with a key combo??? They make it worse with every phone they release, first edl, now fastboot. What will be next?
ChrisFeiveel84 said:
When you can boot to fastbootd you can flash the full firmware over fastbootd
With fbe (Same firmware what you have used on your phone )
A hard brick is when you phone goes only in edl
Click to expand...
Click to collapse
But no usb recognize with fastboot enhance
How I can flash ?
kikoleboss said:
But no usb recognize with fastboot enhance
How I can flash ?
Click to expand...
Click to collapse
You can boot to fastbootd?
TheNewHEROBRINE said:
He has got a very strange brick, he can boot to recovery but not to bootloader, so it's not an hard brick like when you can only go into EDL mode. Did seriously OnePlus remove the possibility to enter bootloader mode with a key combo??? They make it worse with every phone they release, first edl, now fastboot. What will be next?
Click to expand...
Click to collapse
I am very seriously annoyed, I can't find any solution since the usb is no longer recognized
kikoleboss said:
But no usb recognize with fastboot enhance
How I can flash ?
Click to expand...
Click to collapse
Is the fastboot driver installed ?
TheNewHEROBRINE said:
You can boot to fastbootd?
Click to expand...
Click to collapse
yes the phone go only on fastbootd with volume and power
ChrisFeiveel84 said:
Is the fastboot driver installed ?
Click to expand...
Click to collapse
normally yes the same on two pc
but how can i be sure
On CMD
fastboot flashing unlock
< waiting for any device >
Fastboot enhance nothing because no usb recognize
kikoleboss said:
yes the phone go only on fastbootd with volume and power
Click to expand...
Click to collapse
Are you sure that's not just recovery mode?