Problem with Sixaxis Controller app after official Oreo OTA update

Problem with Sixaxis Controller app after official Oreo OTA update - OnePlus 5T Questions & Answers

Hey guys, i'm wondering if any of you is using the Sixaxis controller app. I was using it on Nougat but when i installed the official 8.0 Oreo updete on my OP5T i cannot get it to connect. I've wiped the system cache and tried to pair the DS3 with no luck. I was using Super Su so far yet this time i decided to go with magisk (i don't know if it makes any difference). The app goes through all the available methods where on Nougat it performed the first method and i was good to go.
I am considering downgrading to nougat for now.
Here is the log from the app:
Quick Start:
- Pair controllers via USB using supplied utility
- Use 'start' and 'stop' to toggle driver
- Press power button on controllers to activate
- Change input method to 'Sixaxis Controller'
- Check 'help' menu for detailed instructions
Getting bluetooth address...
Attempting connection method 1...
Driver Starting...
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 2...
Driver Starting...
Wrong number of ports were opened
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 3...
Driver Starting...
Could not find stack manager interface in library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 4...
Driver Starting...
Could not load bluetooth library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 5...
Driver Starting...
Could not load HCI library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 6...
Driver Starting...
Could not set HCI raw mode
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 7...
Driver Starting...
Could not set HCI raw mode
Error: Failed to configure bluetooth
Attempting to close server...
Restoring previous bluetooth state...
Disconnected

Lissu said:
Hey guys, i'm wondering if any of you is using the Sixaxis controller app. I was using it on Nougat but when i installed the official 8.0 Oreo updete on my OP5T i cannot get it to connect. I've wiped the system cache and tried to pair the DS3 with no luck. I was using Super Su so far yet this time i decided to go with magisk (i don't know if it makes any difference). The app goes through all the available methods where on Nougat it performed the first method and i was good to go.
I am considering downgrading to nougat for now.
Here is the log from the app:
Quick Start:
- Pair controllers via USB using supplied utility
- Use 'start' and 'stop' to toggle driver
- Press power button on controllers to activate
- Change input method to 'Sixaxis Controller'
- Check 'help' menu for detailed instructions
Getting bluetooth address...
Attempting connection method 1...
Driver Starting...
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 2...
Driver Starting...
Wrong number of ports were opened
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 3...
Driver Starting...
Could not find stack manager interface in library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 4...
Driver Starting...
Could not load bluetooth library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 5...
Driver Starting...
Could not load HCI library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 6...
Driver Starting...
Could not set HCI raw mode
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 7...
Driver Starting...
Could not set HCI raw mode
Error: Failed to configure bluetooth
Attempting to close server...
Restoring previous bluetooth state...
Disconnected
Click to expand...
Click to collapse
Hello, i have exactly the same problem with my OP5.
I have send un message to the dev team but no answer.

Lissu said:
Hey guys, i'm wondering if any of you is using the Sixaxis controller app. I was using it on Nougat but when i installed the official 8.0 Oreo updete on my OP5T i cannot get it to connect. I've wiped the system cache and tried to pair the DS3 with no luck. I was using Super Su so far yet this time i decided to go with magisk (i don't know if it makes any difference). The app goes through all the available methods where on Nougat it performed the first method and i was good to go.
I am considering downgrading to nougat for now.
Here is the log from the app:
Quick Start:
- Pair controllers via USB using supplied utility
- Use 'start' and 'stop' to toggle driver
- Press power button on controllers to activate
- Change input method to 'Sixaxis Controller'
- Check 'help' menu for detailed instructions
Getting bluetooth address...
Attempting connection method 1...
Driver Starting...
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 2...
Driver Starting...
Wrong number of ports were opened
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 3...
Driver Starting...
Could not find stack manager interface in library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 4...
Driver Starting...
Could not load bluetooth library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 5...
Driver Starting...
Could not load HCI library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 6...
Driver Starting...
Could not set HCI raw mode
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 7...
Driver Starting...
Could not set HCI raw mode
Error: Failed to configure bluetooth
Attempting to close server...
Restoring previous bluetooth state...
Disconnected
Click to expand...
Click to collapse
Got the exact same problem. Any luck finding a solution or do you have any answers?

Any of you found out why? I've just the 5T and areal having the same problem.

Same problem. Did anyone find a solution?

Lissu said:
Hey guys, i'm wondering if any of you is using the Sixaxis controller app. I was using it on Nougat but when i installed the official 8.0 Oreo updete on my OP5T i cannot get it to connect. I've wiped the system cache and tried to pair the DS3 with no luck. I was using Super Su so far yet this time i decided to go with magisk (i don't know if it makes any difference). The app goes through all the available methods where on Nougat it performed the first method and i was good to go.
I am considering downgrading to nougat for now.
Here is the log from the app:
Quick Start:
- Pair controllers via USB using supplied utility
- Use 'start' and 'stop' to toggle driver
- Press power button on controllers to activate
- Change input method to 'Sixaxis Controller'
- Check 'help' menu for detailed instructions
Getting bluetooth address...
Attempting connection method 1...
Driver Starting...
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 2...
Driver Starting...
Wrong number of ports were opened
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 3...
Driver Starting...
Could not find stack manager interface in library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 4...
Driver Starting...
Could not load bluetooth library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 5...
Driver Starting...
Could not load HCI library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 6...
Driver Starting...
Could not set HCI raw mode
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 7...
Driver Starting...
Could not set HCI raw mode
Error: Failed to configure bluetooth
Attempting to close server...
Restoring previous bluetooth state...
Disconnected
Click to expand...
Click to collapse
Same error, I up the post if someone know how to fix this.... i've got that the ps3 controller ask me for a pin to link

Fix this
I cant help....please

Same problem guys with my pocophone. It was working with oreo but since i update to pie now it cant connect with any attempt. All are failing.

Scarface90 said:
Same problem guys with my pocophone. It was working with oreo but since i update to pie now it cant connect with any attempt. All are failing.
Click to expand...
Click to collapse
What version miui oreo on poco f1 u run sixaxis and working ?

Kamil_87 said:
What version miui oreo on poco f1 u run sixaxis and working ?
Click to expand...
Click to collapse
None of the miui versions ever worked with sixaxis app for me. At least with my mi6 and my pocophone now. What is working is the latest stable version global which is based in oreo and the pixel experience which is stock rom flashed with twrp. So fastboot the latest stable miui10 for your phone if its only based still in oreo and not pie and then flash pixel experience but be careful that the rom is also not based to pie but oreo rom. Then it will work.

same problem with poco f1 miui 10 android 9

@Scarface90 can you tell me which rom will work for this app on poco f1 i have already tried pixel experience oreo but it didn't work

Related

[Q] adb over bluetooth

Any one know how to use adb over bluetooth in this device ??
I tried 'pand' command from terminal and this doesn't work.

impossible...

try this, for linux pc.
http://fomori.org/blog/blog/2011/12/05/android-adb-over-bluetooth/

nfs1mw said:
try this, for linux pc.
http://fomori.org/blog/blog/2011/12/05/android-adb-over-bluetooth/
Click to expand...
Click to collapse
I already tried this but didn't work
pand gave some error "Failed to open control socket: Address family not supported.........."
then I thought this error may be due to lack of bluetooth module.so I compiled "bluetooth.ko" and loaded.
then the error disappeared but the thing didn't worked..
I think my bluetooth device is not detected by the module because '/sys/class/bluetooth' directory was empty
So still now i am seeking for a solution....

harish2704 said:
I already tried this but didn't work
pand gave some error "Failed to open control socket: Address family not supported.........."
then I thought this error may be due to lack of bluetooth module.so I compiled "bluetooth.ko" and loaded.
then the error disappeared but the thing didn't worked..
I think my bluetooth device is not detected by the module because '/sys/class/bluetooth' directory was empty
So still now i am seeking for a solution....
Click to expand...
Click to collapse
Well it actually is not impossible. I already had it working.
But your phone shouldn't have any issues with BLUETOOTH PAN profile. If having any issues maybe don't expect this to work. And it need not have mobile internet for both phone or PC. Its just phone-to-pc direct connection, no need for internet access point. Lets think there is no mobile internet enabled for the below HOW-to.
Ok here u go. Pair your phone and PC. Initiate BT PAN connection from PC to phone (right click on bluetooth device and select connect-via-access-point). This creates a local connection. Now u need to know local IP address on phone side. Install terminal emulator application and issue the command "netcfg" which lists all connections active. Note the IP address of the connection bnep0 (say ww.xx.yy.zz)
Now open your PC Command prompt and type the command
adb connect ww.xx.yy.zz:5555
it says connected. Enjoy.
Same goes for wireless connection through LOCAL WIFI (WLAN) without internet access point.
Lets think mobile internet is off.
Turn on the portable Wifi Hotspot on the android device and make ur PC to connect to that hotspot. Note down the local ip address of the connection. Then open pc command prompt and type same command as above
adb connect ww.xx.yy.zz:5555
connected . enjoy.
IMPORTANT: First of all u need to enable ADB OVER NETWORK option in phone. This option is present in latest roms like cm7.2 or cm9 or ics roms. If this option is not available u need to find terminal alternatives for this.

Noob here.
Is there any detail guide to do this ???

[HELP] Wifi Error on P350

Hi,
i'm experiencing a problem on my P350. After installing a custom firmware, i decided to restore the original stock rom by KDZ.
I cannot activate wifi(it says error), i connected the device to logcat and i get this error:
E/WifiHW ( 1381): wifi_load_driver=>driver module path error
E/WifiService( 1381): Failed to load Wi-Fi driver.
I've tried to restore the wifi by using Wifi Fixer app, but it crashes when i click on the button on the top right of the application.
I've also performed a factory reset again and again...
What can i do? Thank you

[Q] VPN Problem with evervolv 2014-01-02 (Kitkat)

Hi,
currently I'm running the ev nightly-2014-01-02. Since several days I ty to activate a VPN connection into my home lan (connected with an AVM Router). It does NOT work. While the "internal" VPN Software does not tell me some interesting information a second try with VPNCilla shows:
--- cut here ---
Error on establish:
command '693 interface fwmark rule add tun0'
failed with '400 693 Failed to add fwmark rule (File exists)'
Possible reason: invalid server parameter or TUN device unavailable
---cut here ---
With this error message I find in google some information about a VPN problem in 4.4. BUT: my wife's brand new nexus 5 with Kitkat connects without trouble immediately with the same login data.
So what's the problem with ev here?
Any ideas?
Thanks in advance

Steill awaiting response
Really nobody here any ideas?

ResurrectionRemix Bluetooth Connection Issue with Mercedes Benz COMMAND Navigation

Hi All,
Installed the latest ResurrectionRemix-M-v5.7.0-20160616-jfltetmo.zip on my S4 and cannot connect to Mercedes Benz navigation. Both system can see each other. No errors get displayed on the phone pairing devices. MB Command always displays an error "Access denied". There no differences if paring initiated from each devices.
Tried factory reset CM13 - same issue.
Tried factory reset and RR 5.7.0 after that - same issue.
Tried BlueDUN - couldn't see even any connection attempt.
Tried to connect to iPhone - iPhone reported an error - "Samsung Galaxy S4 not supported", no errors on S4.
Tried to connect to ASUS Android tablet - all worked, could send a file.
Thanks for suggestions.