One Plus 5T dead? - OnePlus 5T Questions & Answers

Hey guys, I've given up. For every step I make it gets worse.
I had rooted my OP with Magisk, and one night i decided to update my OP. I woke up and tried to turn on my OP, it went to 1+ screen as usual but then the LED went white and the screen totally blank.. I couldn't do a thing.. I decided to wipe everything on my OP with TWRP recovery mode, but it made it worse. Now when i turn it on it starts a bootloop. Recovery mode is totally gone from the phone, and my computer and ADB can't detect my OP. The only things I can do now is going into bootloader or turning it into an endless bootloop.
Can you guide me through this?

Kastholm9fem said:
Hey guys, I've given up. For every step I make it gets worse.
I had rooted my OP with Magisk, and one night i decided to update my OP. I woke up and tried to turn on my OP, it went to 1+ screen as usual but then the LED went white and the screen totally blank.. I couldn't do a thing.. I decided to wipe everything on my OP with TWRP recovery mode, but it made it worse. Now when i turn it on it starts a bootloop. Recovery mode is totally gone from the phone, and my computer and ADB can't detect my OP. The only things I can do now is going into bootloader or turning it into an endless bootloop.
Can you guide me through this?
Click to expand...
Click to collapse
Look here: https://forum.xda-developers.com/on...bricking-tool-confirmation-t3733012?nocache=1

ADB doesn't work while in the bootloader...
Might still be possible to use fastboot in bootloader mode to flash TWRP, boot to recovery, connect to a computer, transfer over a full OTA zip and flash that.
If nothing else though, the unbrick tool likely works...

Didgeridoohan said:
ADB doesn't work while in the bootloader...
Might still be possible to use fastboot in bootloader mode to flash TWRP, boot to recovery, connect to a computer, transfer over a full OTA zip and flash that.
If nothing else though, the unbrick tool likely works...
Click to expand...
Click to collapse
Probably exactly what the unbrick tool would do, except it would more than likely use stock recovery instead of TWRP.

dabistduja said:
Look here: https://forum.xda-developers.com/on...bricking-tool-confirmation-t3733012?nocache=1
Click to expand...
Click to collapse
Use this tool, it's damn easy making your OP back to original FW out of the box.

l3ones said:
Probably exactly what the unbrick tool would do, except it would more than likely use stock recovery instead of TWRP.
Click to expand...
Click to collapse
So, in other words it'd be less work using fastboot, because you'd have TWRP from the start and could put whatever ROM version you'd want on there straight away... :laugh:

Related

RESOLVED-[Q] HTC One M8 (HK)- Help flashing Lollipop

Hello all, I have searched for more than a couple hours and just seem to be getting nowhere. Here's the deal: I have an HTC One M8 with TWRP, root, an unlocked bootloader and S-ON. I want to install Lollipop, but can't take the OTA.
I know a little bit about what I'm doing, I tried to flash a rooted stock ROM but it didn't take. I wiped all directories but the internal storage. Also wiped the Dalvik, `but I could not get the update to take. I tried a few other things but out of fear of bricking my phone I wasn't very adventurous. I flashed the backup I made beforehand and it worked fine.
I think I have the wrong file...? Could my S-ON be the problem?
Sprint HTC One M8 (HK edition)
Android: v4.4.4
Sense: v6.0
Kernel: 3.4.0
Baseband: v1.08.20.0916
Build:3.31.654.2
All I want to do is flash lollipop. Will I have to lock the bootloader and go back to stock recovery to do it? Can I use adb sideload to install it via adb?
Thank you for your time.
http://forum.xda-developers.com/showpost.php?p=59071793&postcount=10
ckpv5 said:
http://forum.xda-developers.com/showpost.php?p=59071793&postcount=10
Click to expand...
Click to collapse
I'm pretty sure my phone is toast.
PLEASE HELP, it worked just fine before I took your advice...
I relocked the bootloader and verified it multiple times before doing this. I made sure everything was exactly the way it was explained in the instructions, all files were correct.
I put the phone into fastboot, which I verified with adb.
I ran the Sprint_HTC_One_M8_HK_4.20.654.10_RUU .exe file and followed the instructions.
Both the program and pphone are currently frozen. They have been this way for almost 2 hours now.
The phone is stuck at the black HTC splash screen and the installer says
Updating...(0/7)... #(<--- these dots are still in motion like its installing)
Updating the ROM image on your Android phone...
[color=redPlease do not remove the USB connection from the Android phone or launch any programs during the update process.[/red]
Remember, this operation will take about 10 minutes.
Click to expand...
Click to collapse
I haven't done anything, its still plugged in.
I don't know what to do, can I just unplug it and flash my bavkup with TWRP?
PLEASE HELP I'M FREAKING OUT.
ckpv5 said:
http://forum.xda-developers.com/showpost.php?p=59071793&postcount=10
Click to expand...
Click to collapse
not_important said:
I'm pretty sure my phone is toast.
PLEASE HELP, it worked just fine before I took your advice...
I relocked the bootloader and verified it multiple times before doing this. I made sure everything was exactly the way it was explained in the instructions, all files were correct.
I put the phone into fastboot, which I verified with adb.
I ran the Sprint_HTC_One_M8_HK_4.20.654.10_RUU .exe file and followed the instructions.
Both the program and pphone are currently frozen. They have been this way for almost 2 hours now.
The phone is stuck at the black HTC splash screen and the installer says
I haven't done anything, its still plugged in.
I don't know what to do, can I just unplug it and flash my bavkup with TWRP?
PLEASE HELP I'M FREAKING OUT.
Click to expand...
Click to collapse
Ok, the phone is not recognized by adb but is still recognized by fastboot, can I reboot it into TWRP by using
Code:
fastboot reboot recovery
then just flash the backup I made before all this crap started?
*EDIT* RESOLVED
Never mind, I resolved it myself. I just typed
Code:
fastboot reboot
and hit enter. It booted right up.
not_important said:
Ok, the phone is not recognized by adb but is still recognized by fastboot, can I reboot it into TWRP by using
Code:
fastboot reboot recovery
then just flash the backup I made before all this crap started?
*EDIT* RESOLVED
Never mind, I resolved it myself. I just typed
Code:
fastboot reboot
and hit enter. It booted right up.
Click to expand...
Click to collapse
I looked through it and all user made folders are gone, but all user downloaded apps are still there. I also noticed that superSU root access was off, but the 'apply on boot' option was turned on, could this be what crashed the updater?

Phone no longer bricked (yay!), but not fastboot

The backstory: I have no experience with rooting and or flashing custom ROMs. Prior to today my ze551ml was completely stock, running on the official android M update. I had a need to do a factory reset, but the phone would simply reboot. I assumed this was a problem with the update so I download and attempted to install the downgrade to l. Naturally it crashed mid downgrade and I thought it to be bricked. So, I started Googling and realized I was able to get into fastboot mode, but not recovery. Following a guide I located I attempted to flash the preroot ROM located at the link below:
http://forum.xda-developers.com/zenfone2/development/rom-pre-root-img-t3079590
Well, it appeared to have worked, but now the phone refused to boot at all after being turned off. So, more Googling and I proceeded to follow the full unbricking guide below:
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Partway through step 1.3 the phone restarted itself and booted right up into Android L! Success I thought to myself, but it was not to be. I proceeded to download the FOTA L update and it downloaded fine, but when I clicked to install it simply rebooted the phone. Tried a couple of other times with the same result. I realized that Supersu was installed so I did the full unroot assuming that was the problem, but to no avail. It appears that the updates can't install because the phone is incapable of entering fastboot or recover mode. Anytime I attempt to enter fastboot via hard key or through adb the phone hangs on the ASUS logo. Adb detects the phone when it's connected via USB, but of course fastboot can't because I can't get it into fastboot mode at all.
Any tips on how to get fastboot operational again so I can start applying updates again? Every guide I've located has started with "boot into fastboot/recovery" which simply isn't an option. Any help is appreciated.
Edit: Well, I think I've reached the end of the internet trying to google for a solution. The phone works, but it looks like it's stuck on build 2.13.40.13 until the end of its life. If anybody has any ideas I'm still hoping for a solution, but I can't find anything describing how to restore fastboot if the OS is intact.
kidnova said:
The backstory: I have no experience with rooting and or flashing custom ROMs. Prior to today my ze551ml was completely stock, running on the official android M update. I had a need to do a factory reset, but the phone would simply reboot. I assumed this was a problem with the update so I download and attempted to install the downgrade to l. Naturally it crashed mid downgrade and I thought it to be bricked. So, I started Googling and realized I was able to get into fastboot mode, but not recovery. Following a guide I located I attempted to flash the preroot ROM located at the link below:
http://forum.xda-developers.com/zenfone2/development/rom-pre-root-img-t3079590
Well, it appeared to have worked, but now the phone refused to boot at all after being turned off. So, more Googling and I proceeded to follow the full unbricking guide below:
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Partway through step 1.3 the phone restarted itself and booted right up into Android L! Success I thought to myself, but it was not to be. I proceeded to download the FOTA L update and it downloaded fine, but when I clicked to install it simply rebooted the phone. Tried a couple of other times with the same result. I realized that Supersu was installed so I did the full unroot assuming that was the problem, but to no avail. It appears that the updates can't install because the phone is incapable of entering fastboot or recover mode. Anytime I attempt to enter fastboot via hard key or through adb the phone hangs on the ASUS logo. Adb detects the phone when it's connected via USB, but of course fastboot can't because I can't get it into fastboot mode at all.
Any tips on how to get fastboot operational again so I can start applying updates again? Every guide I've located has started with "boot into fastboot/recovery" which simply isn't an option. Any help is appreciated.
Edit: Well, I think I've reached the end of the internet trying to google for a solution. The phone works, but it looks like it's stuck on build 2.13.40.13 until the end of its life. If anybody has any ideas I'm still hoping for a solution, but I can't find anything describing how to restore fastboot if the OS is intact.
Click to expand...
Click to collapse
You have to use full unbrick method(xfstk + raw) to restore ur device fully
xfstk will restore ur fastboot image
yakub234go said:
You have to use full unbrick method(xfstk + raw) to restore ur device fully
xfstk will restore ur fastboot image
Click to expand...
Click to collapse
Thanks for the response. I've tried this a dozen times, but unfortunately (this is going to sound weird) since it's not completely bricked it is only detected as Moorefield for a few seconds when started. This allows the xfstk tool to detect it and begin the download, but not long enough to complete the process so it times out. The only development access I have to the phone now is via adb, but since I don't have root I'm very limited in what I can do via command line. Since I can't access fastboot I can't achieve root. It's just a comedy of errors now.
kidnova said:
The backstory: I have no experience with rooting and or flashing custom ROMs. Prior to today my ze551ml was completely stock, running on the official android M update. I had a need to do a factory reset, but the phone would simply reboot. I assumed this was a problem with the update so I download and attempted to install the downgrade to l. Naturally it crashed mid downgrade and I thought it to be bricked. So, I started Googling and realized I was able to get into fastboot mode, but not recovery. Following a guide I located I attempted to flash the preroot ROM located at the link below:
http://forum.xda-developers.com/zenfone2/development/rom-pre-root-img-t3079590
Well, it appeared to have worked, but now the phone refused to boot at all after being turned off. So, more Googling and I proceeded to follow the full unbricking guide below:
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Partway through step 1.3 the phone restarted itself and booted right up into Android L! Success I thought to myself, but it was not to be. I proceeded to download the FOTA L update and it downloaded fine, but when I clicked to install it simply rebooted the phone. Tried a couple of other times with the same result. I realized that Supersu was installed so I did the full unroot assuming that was the problem, but to no avail. It appears that the updates can't install because the phone is incapable of entering fastboot or recover mode. Anytime I attempt to enter fastboot via hard key or through adb the phone hangs on the ASUS logo. Adb detects the phone when it's connected via USB, but of course fastboot can't because I can't get it into fastboot mode at all.
Any tips on how to get fastboot operational again so I can start applying updates again? Every guide I've located has started with "boot into fastboot/recovery" which simply isn't an option. Any help is appreciated.
Edit: Well, I think I've reached the end of the internet trying to google for a solution. The phone works, but it looks like it's stuck on build 2.13.40.13 until the end of its life. If anybody has any ideas I'm still hoping for a solution, but I can't find anything describing how to restore fastboot if the OS is intact.
Click to expand...
Click to collapse
seems like you did not install droidboot.bin correctly... only way is use xFSTK again.i have updated the link to latest raw firmware 2.20.40.194 and use the same guide and commands..
sukhwant717 said:
seems like you did not install droidboot.bin correctly... only way is use xFSTK again.i have updated the link to latest raw firmware 2.20.40.194 and use the same guide and commands..
Click to expand...
Click to collapse
The problem is that it's only recognized as Moorefield for a few seconds which isn't enough time for xFSTK to complete the install. Do you know of a way to force the device to stay connected as Moorefield?
kidnova said:
The problem is that it's only recognized as Moorefield for a few seconds which isn't enough time for xFSTK to complete the install. Do you know of a way to force the device to stay connected as Moorefield?
Click to expand...
Click to collapse
Plug the phone to the PC, be sure the phone is completely off and then hold power + vol- for a few seconds. You must see the "Moorefield" driver permanent in the device manager.
Btw... I got the same problem (four lines, not bootloader, not OS; xFSTK FW+OS failed) and I'm stuck in this step :/
mrperalta said:
Plug the phone to the PC, be sure the phone is completely off and then hold power + vol- for a few seconds. You must see the "Moorefield" driver permanent in the device manager.
Btw... I got the same problem (four lines, not bootloader, not OS; xFSTK FW+OS failed) and I'm stuck in this step :/
Click to expand...
Click to collapse
I've tried this many times, but it only shows Moorefield for a few seconds. I'm assuming this is because it has a fully operational OS so it doesn't stay in the generic USB device mode.
EDIT: I misread your original post. Holding power and volume DOWN does keep connect it in Moorefield. Thanks so much for that. The problem now is that once xFSTK gets to downloading the OS it reboots the phone which takes it out of USB mode and disconnects the tool. I'm still stuck where I was before, but that's a little progress. Any other thoughts?
New update. I'm able to get to the point of loading the OS from xFSTK by skipping the FW part, however it continuously fails. My assumption is because it can't overwrite the existing OS. Any other ideas?
kidnova said:
New update. I'm able to get to the point of loading the OS from xFSTK by skipping the FW part, however it continuously fails. My assumption is because it can't overwrite the existing OS. Any other ideas?
Click to expand...
Click to collapse
Kidnova, reading this post I could fixed my problem. The "issue" was in the xFSTK where you put the flag (0x800000807). A guy on the threat said to put "0x80000807" instead of "0x800000807" (note that there is "0" from difference).
"those who are not able to keep device connected. take care of few steps
1. in xFSTK option menu change the flag override value to 0x80000807 not 0x800000807 ( don't forget to click gp value over ride)
2. while connecting to xFSTK attach usb to computer. hold power button for 20 seconds to make sure it power downs completely. then hold the power button down and click power button. wait till device vibrate or computer makes detection sound. leave power button but keep holding the volume button for few seconds"
Click to expand...
Click to collapse
-sukhwant717
mrperalta said:
Kidnova, reading this post I could fixed my problem. The "issue" was in the xFSTK where you put the flag (0x800000807). A guy on the threat said to put "0x80000807" instead of "0x800000807" (note that there is "0" from difference).
-sukhwant717
Click to expand...
Click to collapse
You guys are lifesavers! I've got fast boot again. Now to see if I can continue without screwing it up.
FINAL EDIT: I have a 100% functional stock Zenfone 2. Thanks everybody for your help.
kidnova said:
You guys are lifesavers! I've got fast boot again. Now to see if I can continue without screwing it up.
FINAL EDIT: I have a 100% functional stock Zenfone 2. Thanks everybody for your help.
Click to expand...
Click to collapse
Hi, got the same issues, I've read many posts. Tried all of the million options. What was your final way of doing it, do you remember?

Interrupted flashing during "VolumeUp + Power" mode

I have updated my Nexus 5x to 7.1.1 beta and after a day it powered off and I got the infamous red led during charging. I was not able to turn the phone on even after leaving the charger on for some days. I thought it is bricked and left it alone connected to my computer.
However today, out of nowhere Google logo popped up. It was bootlooping, but I was able to enter bootloader and original recovery. I wanted to flash it from bootloader, but was unable, because it was still oem locked. And I was not able to oem unlock, because I did not do the required part in the Developer Tools menu. I tried to adb sideload OTA in the original recovery, but sideloading stopped after uploading ~48% every time.
So I opted for the "VolumeUp + Power" mode flashing. Phone was recognized and I started flashing the appropriate TOT file. However at 33% on phone and 28% on the PC, progress stopped. And after a minute or so phone turned off. Currently it has no signs of life at all. Have I completely bricked it now? Is there a way to recover from interrupted "VolumeUp + Power" flashing mode?
EDIT: at first I though maybe the battery died during flashing. But interruption was not abrupt. First the progress slowed down to halt. And then after some time phone turned off.
It seems not all is lost. Have a blinking red light again after leaving it connected to computer for a day. Back to square one, but at least it is alive.
Your motherboard is dead.
And it is not your fault, mine also died while using beta 7.1 and I sent it RMA. They replaced for a new one.
But in my case i had unlocked bootloader, I flashed back 7.0 and it gave no results, still bootloop that's why I sent
Thanks for the info.
After leaving my phone with a clamp on a power button throughout the night (so the red light would flash continuously), I got it booting into "VolumeUp + Power" mode and this time I have successfully flashed the same TOT file via LGUp software. It was still bootlooping after flashing. Now I was able to enter into bootloader and recovery and this time sideloading the same previous file actually works. However it still bootloops.
Anyway, I tried to RMA it and after giving my IMEI to the Google rep, they said that they could not find it in their system after checking US and UK store records. Also tried calling LG warranty, but they do not know of my IMEI either. I got this phone from Swappa, so I left wondering where did the original owner of this phone got it from. He claimed that he got it as a present...
BlinK_ said:
Thanks for the info.
After leaving my phone with a clamp on a power button throughout the night (so the red light would flash continuously), I got it booting into "VolumeUp + Power" mode and this time I have successfully flashed the same TOT file via LGUp software. It was still bootlooping after flashing. Now I was able to enter into bootloader and recovery and this time sideloading the same previous file actually works. However it still bootloops.
Click to expand...
Click to collapse
out of curiosity, have you ever tried to flash custom recovery through the bootloader ? If you can, you might also wanna try to make a EFS backup, wipe all partition, then flash custom rom or near-stock rom like this one, just for the sake of testing.
anazhd said:
out of curiosity, have you ever tried to flash custom recovery through the bootloader ? If you can, you might also wanna try to make a EFS backup, wipe all partition, then flash custom rom or near-stock rom like this one, just for the sake of testing.
Click to expand...
Click to collapse
I wanted to flash custom recovery but was unable to do so, because device is still OEM locked. And I am unable to unlock it, because I did not do the confirmation in the Developer Options before device started to bootloop. Is there a way to flash custom recovery without this step in Developer Options?
BlinK_ said:
I wanted to flash custom recovery but was unable to do so, because device is still OEM locked. And I am unable to unlock it, because I did not do the confirmation in the Developer Options before device started to bootloop. Is there a way to flash custom recovery without this step in Developer Options?
Click to expand...
Click to collapse
For now, no way that I can think of. You could try to oem unlock it until it work, just cross your finger I guess?
I have some progress here. Since I was able to sideload various OTA images, I started doing that one by one and seeing if some of them would not bootloop. And after flashing 7.0.0 (NRD91N) from here (https://developers.google.com/android/ota) phone booted successfully and now is working. Will report if I get any problems.

Stuck on team win recovery project please help

I have no idea how to root or anything like that, I bought this oneplus 3 and had a update a week later.. so when I did the software update it took me into teamwin recovery mode and now I don't know how to get back into my phone please help....
Did you buy the phone second hand or did you try to flash TWRP yourself? It shouldn't have TWRP installed by default.
Regardless, you can use TWRP to flash the latest update.
Given that you have TWRP, I'm assuming that you have an unlocked bootloader. Did you notice a warning pop up everytime you reboot your phone before? It should say something along the lines of "your device has been unlocked and can't be trusted". If not, you'll have to unlock it (it wipes your phone in the process).
If the bootloader is unlocked, you can simply download and flash the latest zip for OOS 4.0.3 in TWRP. This will update you phone and replace TWRP with the stock recovery (so you don't run into this problem again in the future when installing an OTA). If you don't intend to modify your phone in any way, then this is all you need to do, your phone should be functional.
There are plenty of threads with detailed guides on how to do all of this.
I'm also stuck on TWRP after stupidly downloading the latest OTA and I don't know what to do!
Phone won't boot normal, just goes off.
Situation:
- Bootloader, Fastboot and TWRP wil load.
- Device seen by windows
- Zip install in TWRP gets stuck at 'patching zip unconditiontally'
- Another zip flashes, but gets stuck at the end, no reboot option (manually but that's not the way)
Can someone please point me in the right direction? I don't care if I lose data, just want my phone back!
not helping:
Saying i'm a dipsh-t I know, I know, I will do better in the future, for now, help a brother out please
sndr1384 said:
I'm also stuck on TWRP after stupidly downloading the latest OTA and I don't know what to do!
Phone won't boot normal, just goes off.
Situation:
- Bootloader, Fastboot and TWRP wil load.
- Device seen by windows
- Zip install in TWRP gets stuck at 'patching zip unconditiontally'
- Another zip flashes, but gets stuck at the end, no reboot option (manually but that's not the way)
Can someone please point me in the right direction? I don't care if I lose data, just want my phone back!
not helping:
Saying i'm a dipsh-t I know, I know, I will do better in the future, for now, help a brother out please
Click to expand...
Click to collapse
Simple, check the OnePlus D/L sites for this one http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img and flash it by TWRP or fastboot to RECOVERY. Boot once with the official Recovery and all ist fine again.
This is issue of using a faulty twrp so for that when ur phone us booting up go to fastboot and flash twrp 3.0.4-1 and everything will work
emuandco said:
Simple, check the OnePlus D/L sites for this one http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img and flash it by TWRP or fastboot to RECOVERY. Boot once with the official Recovery and all ist fine again.
Click to expand...
Click to collapse
Similar Problem here:
just wanted to flash latest OOS 4.0.3, so I flashed back stock recovery with flashify and rebooted into recovery mode to flash the already downloaded OOS 4.0.3. zip. That's when it began to go poop! After rebooting it just went dark with no Chance to power it on again! No dice with power button, Volume up/down + power button, nothing! Not even the LED's are blinking when plugged in. So this one seems to be basically dead!
I got it once booting again after randomly pushing the buttons (after x minutes!?), but everytime I reboot the phone it just shuts off without beeing able to power it on again. At the Moment it's dead!
Any ideas what might happened? If I get it on again, should I immediately reset it to factory Settings?
I am kinda lost here! Any help/ideas would be much appreciated!
Flashify? Never used it and never trusted apps which flash stuff on a running system. Use fastboot and reflash the recovery partition. Link to recovery is in my former post.
fastboot flash recovery PATHTOIMGFILE
Thank you for your advice! Still a lot to learn! Got it up again, will try as you suggested!
It appeared that my stock recovery file was corrupted , but all is fine again! Thank you very much!
Mannycolon85 said:
I have no idea how to root or anything like that, I bought this oneplus 3 and had a update a week later.. so when I did the software update it took me into teamwin recovery mode and now I don't know how to get back into my phone please help....
Click to expand...
Click to collapse
I may have been the person you traded with to get the OnePlus 3, but I took the phone back and after 5 hours I got it up and running.
The phone would boot to TWRP, but even after wiping the entire system and dragging a ROM zip to the internal storage, reinstalling did nothing. It just kept booting back to recovery.
The solution entailed the following.
Download stock recovery IMG. Flashed through TWRP. Rebooted recovery and now was back to stock recovery.
Download the official OxygenOS ROM zip from the OnePlus website and changed the name to update.zip
Next I downloaded Android studio for access to ADB. I had never used ADB before, but I knew this was needed to push a file to the phone.
Needless to say, ADB kept freezing my computer when I would type in the commands to side load.
I deleted Android studio and installed a minimal ADB/Fastboot I found online. I opened my command prompt, typed the command for sideloading, and immediately got my installation starting. It took about 10 minutes to fully install. When it was finished, I rebooted and had a fully functioning OnePlus 3
Sent from my ONEPLUS A3000 using Tapatalk

Help, might have killed my device

Not 100% sure of best place to post this, but I'm getting desperate now...
I'm pretty worried I've killed my device. After following the guide on how to root with Magisk, my phone is stuck on the white "loading" screen with a G logo. I've since tried to restart, but I can either go into fastboot mode or get the white screen when attempting to boot into android.
Tried to flash the latest factory image to fix it, but that couldn't get that to work. Now the phone isn't showing up on adb devices either. panicking a little bit here.
Does anyone know what to do?
ADB won't work unless the phone is booted into Android or in stock recovery for a sideload.
Does your computer recognize the device when you are in Fastboot mode and type "fastboot devices"? Try flashing the factory image again but make sure you have the most up to date platform tools from Google. Old versions are a common cause of issues.
Did you flash TWRP recovery or just boot to it to root? If you still have stock recovery you can try a factory reset from there but any modified images you installed might be the issue.
like Fury said, your platform tools need to be updated, same thing happened to me.
What didn't work when you flashed the factory image? Do you have the latest sdk tools version of fastboot and adb?
Sent from my [device_name] using XDA-Developers Legacy app
fury683 said:
ADB won't work unless the phone is booted into Android or in stock recovery for a sideload.
Does your computer recognize the device when you are in Fastboot mode and type "fastboot devices"? Try flashing the factory image again but make sure you have the most up to date platform tools from Google. Old versions are a common cause of issues.
Did you flash TWRP recovery or just boot to it to root? If you still have stock recovery you can try a factory reset from there but any modified images you installed might be the issue.
Click to expand...
Click to collapse
Thanks so much, this is where I was going wrong. Have gone into recovery and rescued it.
Tried the process again to get Magisk working, but ended up the same although this time the white screen only went on for a while before I got an error saying my data was corrupted. Tbh, after all the stress I'm just going to give up on this and live with the phone in stock. All my drivers and adb were installed and setup today, so everything is up to date.
edit...
Not out of the woods yet. After restarting the phone and going through the setup, it's not detecting the SIM card or any wifi networks. I've installed the OTA and wiped data once more after having this problem, still not resolved.
Nick676 said:
Thanks so much, this is where I was going wrong. Have gone into recovery and rescued it.
Tried the process again to get Magisk working, but ended up the same although this time the white screen only went on for a while before I got an error saying my data was corrupted. Tbh, after all the stress I'm just going to give up on this and live with the phone in stock. All my drivers and adb were installed and setup today, so everything is up to date.
Thanks again for helping.
Click to expand...
Click to collapse
It sounds like you are trying to install Magisk v17.1 like I tried. If so you need to use v17.3 beta. If you follow this thread you should be fine. It even tells you what to do for your original problem, just takes some reading and patience.
Misterxtc said:
It sounds like you are trying to install Magisk v17.1 like I tried. If so you need to use v17.3 beta. If you follow this thread you should be fine. It even tells you what to do for your original problem, just takes some reading and patience.
Click to expand...
Click to collapse
I tried it with both 17.1 and 17.3, so not sure what the issue is. Seem to have finally booted up properly with wifi and signal working, so hopefully it's all good now. Gonna give up on rooting.
Nick676 said:
Not 100% sure of best place to post this, but I'm getting desperate now...
I'm pretty worried I've killed my device. After following the guide on how to root with Magisk, my phone is stuck on the white "loading" screen with a G logo. I've since tried to restart, but I can either go into fastboot mode or get the white screen when attempting to boot into android.
Tried to flash the latest factory image to fix it, but that couldn't get that to work. Now the phone isn't showing up on adb devices either. panicking a little bit here.
Does anyone know what to do?
Click to expand...
Click to collapse
you may want to try to totally uninstalling Magisk frist with the official latest Magisk uninstaller and reboot and then do a complete factory reset. this has helped me in the past.
my new pixel 3XL will be the first Android phone that I owned that will not be rooted.

Categories

Resources